Evaluation of Some Nonionic Surfactants Derived from Tannic Acid as Additives for Water‐Based Mud

Water‐based mud is the most‐used mud for oil and gas exploration and is generally considered to be more environmentally friendly than oil‐based or synthetic‐based mud. Therefore in this study we focused on water‐based mud and a series of nonionic surfactants derived from tannic acid was evaluated as additives for water‐based muds. The rheological properties for formulated water‐based muds contain nonionic additives at different temperatures were investigated including: apparent viscosity, plastic viscosity, yield point, gel strength, thixotropy and filtration properties. In addition to the relation between shear stress and shear rate were presented at different temperatures. The results of the studied nonionic surfactant showed improvements in the rheological properties when used as additives for water‐based mud formulation.     

Synthesis and Evaluation of Nonionic Surfactants Derived from Tannic Acid as Corrosion Inhibitors for Carbon Steel in Acidic Medium

Nonionic Schiff base surfactants were synthesized by chemical modification of tannic acid. The surface activities of the synthesized surfactants were determined using surface tension, interfacial tension, and emulsification properties. Thermodynamic parameters of adsorption and micellization of these surfactants showed their tendency towards the two processes with greater predominance of adsorption over micellization. Electrochemical polarization and impedance measurements showed that the surfactants exhibited good tendency towards inhibiting the dissolution of carbon steel in acidic medium. The inhibition efficiencies depend on the chemical structure and concentration of the compounds.     

Environmentally Friendly Nonionic Surfactants Derived from Jatropha Oil Fatty Acids as Inhibitors for Carbon Steel Corrosion in Acidic Medium

The inhibition effect of four novel environmentally friendly inhibitors (derived from vanillin and a fatty acid mixture obtained from the hydrolysis of Jatropha oil) on carbon steel corrosion in 0.5 M H₂SO₄ was investigated by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). The results show high efficiency of the inhibitors. The inhibition efficiency increases by increasing the polyethylene glycol chain length and the inhibitor concentration. From polarization curves, the inhibitors act as cathodic inhibitors. EIS spectra display a large capacitive loop at high frequencies followed by a large inductive loop at low frequencies. Environmental study shows inhibitors tendency towards biodegradation by the action of microorganisms after 28 days.     

The Effect of Non Ionic Surfactants Containing Triazole, Thiadiazole and Oxadiazole as Inhibitors of the Corrosion of Carbon Steel in 1M Hydrochloric Acid

In the present investigation novel nonionic surfactants were synthesized, characterized and tested as inhibitors of the corrosion of carbon steel in 1M HCl solution. The inhibition action of these surfactants was studied by weight loss, galvanostatic polarization and electrochemical impedance spectroscopy. The adsorption of the inhibitors was well described by the Langmuir adsorption isotherm and the adsorption isotherm parameters were determined at different temperatures. The inhibition efficiency was found to rise when increasing the concentration of these compounds and decreasing the temperature. The effect of temperature on the inhibition efficiency of the corrosion process was studied and the values of some activated thermodynamic parameters were calculated to elaborate the mechanism of inhibition. The synthesized nonionic surfactants exhibit good surface and antimicrobial properties.     

Corrosion Inhibition Efficiency,Electrochemical and Quantum Chemical Studies of Some New Nonionic Surfactants for Carbon Steel in Acidic Media

In this work, three types of nonionic surfactant as corrosion inhibitors were synthesized. The chemical structure of the prepared inhibitors was confirmed using FT‐IR and ¹H‐NMR spectroscopy. The surface tension and thermodynamic properties of these inhibitors were investigated. The corrosion inhibition efficiency of these surfactants was investigated on a carbon steel surface in 1 M HCl solution by weight loss and electrochemical measurements. Untreated and treated steel surfaces were characterized by scanning electron microscopy. Results show that the inhibition efficiency of the prepared inhibitors increases with increasing the ethylene oxide units. Also, the potentiodynamic polarization curves indicated that the investigated inhibitors behave as a mixed type inhibitor. Adsorption of these surfactants on the carbon steel surface was found to obey Langmuir's adsorption isotherm. The computed quantum chemical properties viz., electron affinity (EA), highest occupied molecular orbital (E_HOMO), the lowest unoccupied molecular orbital (E_LUMO), energy gap ΔE = E_HOMO ? E_LUMO, dipole moment (μ), polarizability and total energy (E_T) show good correlation with experimental inhibition efficiency.     

Mono‐, Di‐ and Tetra‐Cationic Surfactants as Carbon Steel Corrosion Inhibitors

Corrosion inhibition of three new synthesized cationic surfactants, N‐(2‐(((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)amino)ethyl)‐N‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)dodecan‐1‐aminium bromide I(4N), N¹,N²‐didodecyl‐N¹‐((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)‐N²‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)ethane‐1,2‐diaminium bromide II(4N) and 1‐dodecyl‐4‐((E)‐((2‐(dodecyl(2‐(dodecyl((Z)‐4‐(1‐dodecylpyridin‐1‐ium‐4‐yl)but‐3‐en‐1‐yl)ammonio)ethyl)ammonio)ethyl)imino)methyl)pyridin‐1‐ium bromide IV(4N) on carbon steel was investigated by weight loss, electrochemical impedance spectroscopy and polarization measurements. Results show that the synthesized cationic surfactants inhibit corrosion of carbon steel in 1 M HCl. The inhibitive action occurs by virtue of adsorption on the metal surface following a Langmuir adsorption isotherm model. Polarization curves reveal that the investigated cationic surfactants can be classified as mixed inhibitor types. The variations in the corrosion inhibition efficiency between three cationic surfactants are correlated with their chemical structures, with more hydrophobic surfactants yielding higher inhibition efficiency.     

Synthesis, Characterization, Biodegradation and Evaluation of the Surface Active Properties of Nonionic Surfactants Derived from Jatropha Oil

Four nonionic surface active agents were synthesized using the fatty acids obtained from the hydrolysis of Jatropha oil. The fatty acids obtained contained different fatty acids including: palmitic, stearic, oleic, linoleic and linolenic acids in different proportions. The chemical structures of the obtained surfactants were characterized using elemental analysis and FTIR spectroscopy. The surface activities of the different surfactants were determined using surface and interfacial tension measurements. The surfactants showed good surface and interfacial activities, which are dependent on their chemical structures. Thermodynamic parameters of adsorption and micellization confirmed these results. The biodegradation tests in river water showed that the surfactants are readily biodegradable, and reached the European standards after 24 days. Surfactants containing longer nonionic chains formed stable emulsions with paraffin oil, while shorter chains exhibit a lower emulsion stability performance.     

2-Ethylhexanol Derivatives as Nonionic Surfactants: Synthesis and Properties

The synthesis and basic properties of 2‐ethylhexanol based innovative nonionic surfactants are described in this paper. 2‐Ethylhexanol as an available and relatively inexpensive raw material was used as the hydrophobe source modified by propoxylation and followed by polyethoxylation. As the result, six series of 2‐ethylhexyl alcohol polyalkoxylates (EHP_mE_n) were obtained with three steps of propoxylation, each followed by polyethoxylation and two series only with polyethoxylation (EHE_n). Two different catalysts were used, a dimetalcyanide and KOH. Values of average conversion rates and chemical content of the obtained products (GC, TG and GPC techniques) were compared. The influence of the applied catalyst and polyaddition degree on the homologue distribution, reactant conversion and amount of byproducts is discussed. The basic physicochemical parameters including refractive index, solubility in polar media, foaming properties and wettability were investigated and compared. Furthermore, surface activity parameters, i.e. surface tension (γ_CMC) and critical micelle concentrations were determined. Results are compared to C_12–14 alcohol ethoxylates (LaE_n). Accordingly, it was found that the studied 2‐ethylhexyl alcohol based compounds are effective, low foaming nonionic surfactants.     

Synthesis,Characterization, and Evaluation of Ethoxylated Lauryl-Myrisityl Alcohol Nonionic Surfactants as Wetting Agents,Anti-Foamers,and Minimum Film Forming Temperature Reducers in Emulsion Polymer Lattices

Two nonionic FAEO (fatty alcohol ethoxylated) surfactants with varying solubility were obtained by the reaction of lauryl-myrisityl alcohol (LMA) with ethylene oxide to yield lauryl-myristyl/alcohol ethoxylated with 3 and 31 mol of ethylene oxide by changing the length of polyethylene glycol segment. The prepared surfactants, designated as LMAEO-3 and LMAEO-31, were characterized for their structures using spectroscopic measurements; in addition, their surface properties were investigated. The results indicated that LMAEO-31 exhibits excellent surface activity. Evaluation of the surfactants as wetting agents, anti-foamers, and minimum film forming temperature (MFFT) reducer in emulsion polymer lattices achieved promising results indicating high performance in the mentioned industrial applications.     

Synthesis and Evaluation of Some Triazole Derivatives as Corrosion Inhibitors and Biocides

Three compounds namely; 5-(phenyl)-4H-1,2,4-triazole-3-thiol, 3-(decylthio)-5-phenyl-1H-1,2,4-triazole and 3-(benzylthio)-5-phenyl-1H-1,2,4-triazole) were synthesized. The chemical structure of the prepared compounds was confirmed using FTIR and ¹H-NMR analysis. The compounds were tested as corrosion inhibitors against the corrosion of carbon steel in 1 M HCl using weight loss, polarization and electrochemical impedance methods. The results revealed that these compounds have significant inhibiting effects on the corrosion of carbon steel. Polarization studies showed that the compounds act as mixed-type inhibitors which retard the anodic and the cathodic reactions with a predominant effect towards the cathodic reaction. The prepared compounds were evaluated as antimicrobial agents against sulfate-reducing bacteria using the serial dilution method, which showed good biocidal action.     

Synthesis of Quaternary,Long-Chain N-Alkyl Amides and Their Corrosion Inhibition in Acidic Media

New cationic surfactants were synthesized by the quaternization of a number of straight-chain amide derivatives with triethylamine or pyridine. The corrosion inhibition tests of the surface-active compounds were performed at room temperature for 24 h on carbon steel coupons in acidic media using the gravimetric method. The acidic media used were 1.5 M HCl and 1.5 M H₂SO₄. Almost all of the synthesized cationic surfactants showed efficient inhibition of corrosion in the test. To establish the inhibition efficiencies of the inhibitors, surface characterization studies (contact angle measurements, SEM analysis and optical profilometer images) of the metal coupons used were performed.     

Novel Amide-Based Cationic Surfactants as Efficient Corrosion Inhibitors for Carbon Steel in HCl and H2SO4 media

A variety of surface active compounds were synthesized by the quaternization of some straight chain amide derivatives with triethylamine or pyridine. Their structure FT-IR and ¹H-NMR spectra were recorded. In addition their physical properties and corrosion prevention efficiencies were investigated. All compounds were tested with steel coupons in acidic media by the gravimetric method. As acidic media 1.5 M HCl and 1.5 M H₂SO₄ were used and the corrosion inhibition tests fulfilled at room temperature for 24 h. Almost all prepared cationic surfactants showed efficient inhibition around their critical micelle concentrations. The effects of HCl concentration on corrosion inhibition of some synthesized compounds were also investigated. The corrosion tests were supported by contact angle measurements.     

The Oil from Mentha rotundifolia as Green Inhibitor of Carbon Steel Corrosion in Hydrochloric Acid

The corrosion inhibition potentials of Mentha rotundifolia oil on carbon steel in 1 M HCl was studied at different concentrations via gravimetric, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. Polarization curves reveal that Mentha rotundifolia oil is a mixed-type inhibitor. Changes in impedance parameters (charge transfer resistance R_t, and double-layer capacitance C_dl) were indicative of adsorption of Mentha rotundifolia on the metal surface, leading to the formation of a protective film. The effect of the temperature on the corrosion behavior with addition of the optimal concentration of Mentha rotundifolia oil was studied in the temperature range 308 and 338 K. Adsorption of oil on the carbon steel surface is found to obey the Langmuir adsorption isotherm. Attempts to explain the inhibitory action were carried out using density functional theory (DFT) at B3LYP/6-31G(d,p) level. Quantum chemical parameters most relevant to its potential action as corrosion inhibitor such as E_HOMO (highest occupied molecular orbital energy), E_LUMO (lowest unoccupied molecular orbital energy), energy gap (ΔE), and Mulliken charges have been calculated and discussed. The theoretical results were found to be consistent with the experimental data.     

Evaluation of red mud as surface treatment for carbon steel prior painting

Red mud (RM) is the waste product of the Bayer process for obtaining alumina from bauxite. The alkaline nature of RM suspensions together with the presence of Fe³⁺ species point towards the possibility of using RM as a good corrosion inhibitor for carbon steel. Based on this idea, the possible use of RM suspensions as pre-treatment for carbon steel was studied by recording the electrode potential and the electrochemical impedance spectroscopy (EIS) evolution with immersion time. Different parameters regarding the steel surface finishing (grinding, pickling or degreasing) and RM suspension condition (stirred or steady, decanted or filtered) have been considered in the study; the passivation was obtained when ground samples were immersed in decanted RM suspensions and subjected to continuous stirring. The influence of chlorides and pH were analysed by potentiometric titration. The obtained results indicate that treated samples depassivate at lower Cl⁻/OH⁻ ratio than untreated ones. Regarding the pH parameter, treated samples remain passive at lower pH values than the untreated ones. Finally, some treated and untreated samples were painted and subjected to cathodic polarisation experiments, including an artificial defect in the coating. The comparative study was done using EIS technique; the impedance diagrams would indicate an effective passivation of the steel surface for treated samples.     

Effectiveness of some non ionic surfactants as corrosion inhibitors for carbon steel pipelines in oil fields

The ability of new synthesized non ionic surfactants (I and II) to protect carbon steel in acid chloride solution was investigated using potentiostatic polarization, open circuit potential, weight loss and surface tension measurements. The experimental results showed that these inhibitors revealed a very good corrosion inhibition even at low concentrations. The percentage inhibition efficiency (η%) increases by increasing the inhibitor concentration until the critical micelle concentration (cmc) is reached. It was found that, the adsorption ability of the surfactant molecules on carbon steel surface increased with the increase of the molecular size of the surfactant. Potentiostatic polarization curves indicate that the inhibitors under investigation act as mixed type. Finally, the mechanism of carbon steel dissolution in acidic medium was discussed both in absence and presence of the inhibitor molecules.     

Corrosion protective performances of commercial low-VOC epoxy/urethane coatings on hot-rolled 1010 mild steel

The protective properties of low-VOC epoxy/urethane paint systems of commercial grade have been investigated using a variety of techniques such as electrochemical impedance spectroscopy (EIS). One epoxy-polyamide mastic/urethane, three high-solid epoxy-amine/urethane coatings, one solvent-free epoxy-amine/urethane, one water-based epoxy-amine and one high-VOC alkyd paint system (used as paint reference system) were applied on hot-rolled 1010 mild steel panels and exposed for up to 2000 h in the salt spray cabinet (SSC) or for 1 year at an outdoor marine test site. These paints were tested for their barrier properties, corrosion-induced adhesion loss and visual defects, as well as for their flexibility and resistance to direct impact. The barrier properties increased in the following order: alkyd相似文献