Iodination of stable aromatic diazonium salt using crosslinked poly (4‐vinylpyridine)‐supported iodide

In this article, a series of carboxylated acrylate copolymer latices were prepared based on the semicontinuous emulsion polymerization via the pure monomer dropwise manner with three different kinds of carboxylic monomers in presence of reactive emulsifier. The effects of the carboxylic monomers [acrylic acid, methacrylic acid, and monobutyl itaconate (MBI)] on the conversion and the properties of acrylate latices and films have been investigated. The carboxylic groups ( COOH) distribution of these three kinds of latices were investigated as well. The results show that the concentration of surface  COOH (C_S) and embedded  COOH (C_b) both increase with the increase of the amount of carboxylic monomers. It shows that MBI, the most hydrophobic of the three carboxylic monomers used, tends to be concentrated inside the particle core, and the latex particles have a narrow size distribution. The results of common stability test have demonstrated that the stability of the latex is satisfactory. Moreover, the water absorption and the acid and alkaline resistance of the latex depend on the kind of carboxylic monomer. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Random copolymerization of 2,2‐dimethyltri methylene carbonate and ε‐caprolactone using a rare‐earth tris(4‐tert‐butylphenolate)s as a single‐component initiator

Highly random copolymers of 2,2‐dimethyltrimethylene carbonate (DTC) and ε‐caprolactone (CL) were synthesized by single component rare‐earth tris(4‐tert‐butylphenolate)s [Ln(OTBP)₃] for the first time. The influences of reaction conditions on the copolymerization initiated by La(OTBP)₃ have been examined in detail. The monomer reactivity ratios of DTC and CL determined by the Fineman–Ross method are 4.0 for r_DTC and 0.27 for r_CL. The microstructure of the copolymer was determined by the analyses of the diads DTC–DTC, DTC–CL, CL–DTC and CL–CL of the ¹H NMR spectra. The high degree of randomness of the chain structure was further confirmed by the ¹³C NMR spectra and differential scanning calorimetry. The thermal properties of the copolymers as a function of composition are reported. The mechanism investigated by ¹H NMR data indicates that the rare‐earth tris(4‐tert‐butylphenolate)s initiate the ring‐opening copolymerization of DTC and CL with acyl‐oxygen bond cleavages of the monomers. Copyright © 2004 Society of Chemical Industry     

Synthesis and photopolymerizations of new phosphonated methacrylates from alkyl α‐hydroxymethacrylates and glycidyl methacrylate

Novel aromatic mono‐ and di(phosphonate) or phosphonic acid monomers for use in dental composites were synthesized. Synthesis of monomer 1a involved three steps: (i) reaction of t‐butyl α‐bromomethacrylate (t‐BuBMA) and Bisphenol A, (ii) conversion to diacid chloride derivative using thionyl chloride, (iii) reaction of diacid chloride with diethyl (2‐hydroxyphenyl) phosphonate. Monomer 2a was synthesized from the reaction of 2‐chloromethacryloyl chloride and diethyl (2‐hydroxyphenyl) phosphonate. Synthesis of monomer 3a involved reaction of glycidyl methacrylate (GMA) with diethyl (2‐hydroxyphenyl) phosphonate. Hydrolysis of the phosphonate groups of monomers 1a and 2a with trimethylsilyl bromide (TMSBr) gave monomers 1b and 2b with phosphonic acid functionality, which is intended to improve binding ability of dental composites. The homopolymerization and copolymerization behaviors of the synthesized monomers with (Bis‐GMA) were investigated using photodifferential scanning calorimetry at 40°C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as photoinitiator. The interaction of the monomer 1b with hydroxyapatite (HAP) was investigated using Fourier transform infrared technique. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Copolymerization of 2‐Acrylamido‐2‐methyl‐1‐propanesulfonic Acid and 1‐Vinylimidazole in Ethanol

Polymerization rate and copolymerization parameters of the free‐radical copolymerization of AMPS with 1‐VIm was studied as a function of the monomer feed and the pH value in ethanol. It was found that neutral and basic monomer mixtures containing the sodium salt of AMPS polymerized faster and led to polymers with a higher proportion of NaAMPS incorporated than those monomer mixtures containing the free acid. Additionally, based on the experimental data, copolymerization parameters of r_AMPS = 0.3 and r_1‐VIm = 0.13 were calculated for polymerization in acidic solution and r_AMPS = 4.1 and r_1‐VIm = 0.1 for polymerization in basic and neutral solutions. Finally, the thermal stability, rheological behavior, and intrinsic viscosity were determined for the polymers.

     

Functional copolymer/organo‐montmorillonite nanoarchitectures. IX. Synthesis and nanostructure–morphology–thermal behaviour relationships of poly[(maleic anhydride)‐alt‐(acrylic acid)]/organo‐ montmorillonite nanocomposites

Functional copolymer/clay hybrids were synthesized by radical‐initiated interlamellar copolymerization of maleic anhydride/maleic acid and acrylic acid with 2,2′‐azobis(2‐methylpropionamidine) dihydrochloride as a water‐soluble ionizable radical initiator in the presence of reactive (octadecylamine‐montmorillonite (ODA‐MMT)) and non‐reactive (dimethyldodecylammonium‐montmorillonite) organoclays at 60 °C in aqueous medium under nitrogen atmosphere. The monomers were dissolved in aqueous medium, and the two types of clay particles used were easily dissolved and dispersed partially swollen, respectively, in deionized water. Structure, thermal behaviour and morphology of the synthesized nanocomposites were investigated using Fourier transform infrared spectroscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, and scanning and transmission electron microscopy. It is demonstrated that intercalative copolymerization proceeds via ion exchange between organoclays and carboxylic groups of monomers/polymers, which essentially improves interfacial interactions of polymer matrix and clay layers through strong hydrogen bonding. In the case of intercalative copolymerization in the presence of ODA‐MMT clay, a similar improvement is provided by in situ hydrogen bonding and amidolysis of carboxylic/anhydride groups from copolymer chains with primary amine groups of ODA‐MMT. The nanocomposites exhibit higher degree of intercalation/exfoliation of copolymer chains, improved thermal properties and fine dispersed morphology. Copyright © 2011 Society of Chemical Industry     

Comonomer effects in copolymerization of ethylene and 1‐hexene with MgCl2‐supported Ziegler‐Natta catalysts: New evidences from active center concentration and molecular weight distribution

In this article, comonomer effects in copolymerization of ethylene and 1‐hexene with four MgCl₂‐supported Ziegler‐Natta catalysts using either ethylene or 1‐hexene as the main monomer were investigated. It was found that no matter which monomer was used as the main monomer, the polymerization activity was significantly enhanced by introducing small amount of comonomer. In copolymerization with ethylene as the main monomer, the strength of comonomer effects was much stronger in active centers producing low‐molecular‐weight polymer than those producing high‐molecular‐weight polymer. In copolymerization with 1‐hexene as the main monomer, the number of active centers ([C*]/[Ti]) was determined, and the propagation rate constants (k_p) were calculated. Deconvolution of the polymer molecular weight distribution into Flory components were made to study the active center distribution. Introduction of small amount of ethylene caused marked increase in the number of active centers and decrease in average chain propagation rate constant. Introducing internal electron donor in the catalyst enhanced not only the number of active centers but also the chain propagation rate constant. In copolymerization of 1‐hexene with small amount of ethylene, the internal donor weakened the comonomer effects to some extent and changed the distribution of comonomer effects among different types of active centers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41264.     

Ring‐opening copolymerization and properties of polycarbonate copolymers

A series of polycarbonate copolymers were synthesized by the ring‐opening bulk polymerization of 2‐phenyl‐5,5‐bis(hydroxymethyl) trimethylene carbonate (PTC) and 5,5‐dimethyl trimethylene carbonate (DTC) with tin(II) 2‐ethylhexanoate and aluminum isopropoxide as initiators. The copolymers obtained were characterized by ¹H‐NMR, Fourier transform infrared, and ultraviolet. The influence of the molar ratio of the monomers, the initiators, and their concentrations, the reaction time, and the reaction temperature on the copolymerization was also studied. The copolymerization of monomers DTC and PTC was a nonideal copolymerization, and the copolymerization reactivity ratio of the monomer DTC was higher than that of PTC in the copolymerization process. In vitro release profiles of fluorouracil from the copolymers showed that the copolymer had a steady drug‐release rate and good controlled‐release property. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Block and Random Living,Ring‐Opening Metathesis Copolymerization of Functionally Differentiated Carbazole‐Containing Norbornene Monomers

The synthesis of novel diblock polymers containing both a potential charge transport and a non‐linear optic block has been accomplished. The synthesis exploits the living, ring‐opening metathesis block copolymerization of two norbornene type monomers, one of which contains an unsubstituted N‐carbazolyl ring while the other has a bromo substituent at the 3‐position of the carbazole ring. Conversion of the bromo functionality to a 2,2‐dicyanovinyl group introduces the non‐linear optic property. The first monomer was prepared by the previously reported efficient cation radical Diels–Alder cycloaddition of N‐trans‐1‐propenylcarbazole to 1,3‐cyclopentadiene, while the second was obtained by N‐bromosuccinimide bromination of the first monomer. For purposes of comparison, the corresponding random copolymer was also synthesized.     

Copolymerization of potassium chloroacetate and potassium N‐chloroacetyl‐6‐aminohexanoate

The polymerization kinetics of potassium chloroacetate (MGL), potassium N‐chloroacetyl‐6‐aminohexanoate (MEA), and their mixtures was studied by Fourier transform infrared spectroscopy. The bulk polycondensation reaction was faster for MEA than for MGL but kinetic differences in the selected temperature range (110–130°C) were not large enough to make unfeasible copolymerization of both monomers. A decrease in the activation energy was deduced for the polycondensation of monomer mixtures with respect to that determined for the homopolymerization reaction of the predominant neat monomer. differential scanning calorimetry data also showed significant differences in the exothermic polycondensation peaks that suggested an effective copolymerization reaction and favored the kinetic process over the corresponding homopolymerization. The resulting new poly(ester amide)s were characterized by spectroscopy and thermal analysis. ¹H NMR spectra of samples with high MEA content revealed the existence of hetero‐sequences whose ratio was slightly lower than that expected for a random polymerization of the two monomers. Samples with high molecular weights were only attained when the MGL molar ratio in the monomer mixture was lower than 65%. Calorimetric data showed that all samples were thermally stable and became amorphous for intermediate compositions. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Homogeneous graft copolymerization of chitosan with butyl acrylate by γ‐irradiation via a 6‐O‐maleoyl‐N‐phthaloyl‐chitosan intermediate

The graft copolymerization of butyl acrylate (BA) onto chitosan was tried via a new protection‐graft‐deprotection procedure. About 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was synthesized and characterized by Fourier transform infrared spectra analysis (FT‐IR) and ¹H‐NMR. Because the intermediate 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was soluble in organic solvents, the graft copolymerization was carried out in a homogeneous system. Grafting was initiated by γ‐irradiation. The graft extent was dependent on the irradiation dose and the concentration of BA monomer, and copolymers with grafting above 100% were readily prepared. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 489–493, 2006     

Synthesis and characterization of 3,4‐dihydroxyphenylacetic acid imprinted polymers

Eight molecularly imprinted polymers (MIP1–MIP8) were synthesized with different functional monomers and porogens using 3,4‐dihydroxyphenylacetic acid (DOPAC) as a template. Thermal, radical bulk polymerization was employed in the presence of ethylene glycol dimethacrylate as a cross‐linker. A computational analysis indicated that complexes with four molecules of 4‐vinylpyridine, 1‐vinylimidazole and acrylonitrile had high positive enthalpies of formation. The polymers synthesized with these monomers showed an imprinting factor below 1. Polymer MIP8 synthesized with allylamine as the functional monomer, with the highest energy of interaction with DOPAC, was characterized by the highest imprinting factor equal to 1.91. Examination of the binding ability of DOPAC and a group of structurally related compounds showed that the strong interactions between amine groups in the polymer and carboxylic groups in the analyte governed the recognition mechanism. The Langmuir adsorption model and the pseudo‐second‐order mechanism properly evaluated the MIP8 and non‐imprinted polymer 8 adsorption characteristics. Scatchard analysis revealed that MIP8 had two classes of heterogeneous binding sites with K_d(1) = 0.12 µmol L^?1 and K_d(2) = 1.46 µmol L^?1. Finally, the potential application of MIP8 for separation of DOPAC was demonstrated. Copyright © 2011 Society of Chemical Industry     

(Meth)acrylic Cross‐Linked Polymer Microparticles: Synthesis by Dispersion Polymerization and Particle Characterization

(Meth)acrylic cross‐linked polymer microparticles have been synthesized by dispersion polymerization in organic media. They were produced by radical copolymerization of mono(meth)acrylate monomers with a certain concentration of a diacrylate as cross‐linker, in a mixture of two organic solvents, heptane and propan‐2‐ol. The reactive surfactant (“surfmer”) was a low solubility parameter acrylate monomer, based on an aliphatic ester group (generally C₁₈) or an isobornyl cycle, which gave auto‐dispersing character to the microparticles. By using glycidyl methacrylate in the monomer mixture, oxirane groups were introduced in the particles. The influence of the major synthesis parameters such as solvent composition, monomer composition and concentration, and initiator concentration has been investigated regarding the size and the molar mass of the cross‐linked polymer microparticles. The study was completed with the influence of the nature and the concentration of the surfmer, the concentration of cross‐linking agent and the composition of monomers feed. Stable cross‐linked microparticles ranging from z‐average radius of gyration, R_z = 20 nm to R_z > 60 nm were obtained by varying the synthesis conditions. The smallest microparticles were prepared with a blend of heptane and propan‐2‐ol in the 50/50 ratio by weight. Increasing the surfmer concentration or reducing the monomer concentration in the reaction mixture usually led to smaller microparticles. The longer the aliphatic chain of the surfmer, the smaller the microparticles. Minimum sizes were obtained for cross‐linking agent concentrations between 5 and 7.5 mol‐%, depending on monomers composition. For higher concentrations, macrogelation may occur during the synthesis.     

Synthesis and properties of polycarbonate copolymers of trimethylene carbonate and 2‐phenyl‐5,5‐bis(hydroxymethyl) trimethylene carbonate

The polycarbonate copolymers poly[trimethylene carbonate‐co‐2‐phenyl‐5,5‐bis(hydroxymethyl) trimethylene carbonate] [P(TMC‐co‐PTC)] were synthesized by the ring‐opening polymerization of trimethylene carbonate (TMC) and 2‐phenyl‐5,5‐bis(hydroxymethyl) trimethylene carbonate (PTC) with tin(II) 2‐ethylhexanoate and aluminum isopropoxide as the catalysts. These copolymers were further reduced by a palladium/carbonate (Pd/C; 10%) catalyst to produce partly deprotected copolymers. These two types of copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, UV spectroscopy, gel permeation chromatography, differential scanning calorimetry, and an automatic contact angle meter. The influences of the feed molar ratio of the monomers, the catalyst concentration, the reaction time, and the reaction temperature on the copolymerization process were also studied. The copolymerization of the TMC and PTC monomers was a nonideal copolymerization, and the copolymerization reactivity ratio of TMC was higher than that of PTC. In vitro degradation tests indicated that the partly deprotected copolymers possessed faster degradation rates and more hydrophilicity than the corresponding unreduced copolymers. Moreover, the degradation of these two type copolymers increased when the pH value of the buffer solutions decreased. In vitro drug‐release experiments showed that these two types of copolymers had steady drug‐release rates and good controlled release properties. Moreover, the partly deprotected copolymers had faster drug‐release rates than the corresponding unreduced copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Microwave‐assisted and classical heating polycondensation reaction of bis(p‐amido benzoic acid)‐N‐trimellitylimido‐L‐leucine with diisocyanates as a new method for preparation of optically active poly(amide imide)s

A new class of optically active poly(amide imide)s were synthesized via direct polycondensation reaction of diisocyanates with a chiral diacid monomer. The step‐growth polymerization reactions of monomer bis(p‐amido benzoic acid)‐N‐trimellitylimido‐L‐leucine (BPABTL) (5) as a diacid monomer with 4,4′‐methylene bis(4‐phenylisocyanate) (MDI) (6) was performed under microwave irradiation, solution polymerization under gradual heating and reflux condition in the presence of pyridine (Py), dibuthyltin dilurate (DBTDL), and triethylamine (TEA) as a catalyst and without a catalyst, respectively. The optimized polymerization conditions according to solvent and catalyst for each method were performed with tolylene‐2,4‐diisocyanate (TDI) (7), hexamethylene diisocyanate (HDI) (8), and isophorone diisocyanate (IPDI) (9) to produce optically active poly(amide imide)s by the diisocyanate route. The resulting polymers have inherent viscosities in the range of 0.09–1.10 dL/g. These polymers are optically active, thermally stable, and soluble in amide type solvents. All of the above polymers were fully characterized by IR spectroscopy, ¹H NMR spectroscopy, elemental analyses, specific rotation, and thermal analyses methods. Some structural characterization and physical properties of this new optically active poly(amide imide)s are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1647–1659, 2004     

Micropatterning of polymethacrylates by single‐ or two‐photon irradiation using π‐conjugated o‐nitrobenzyl ester phototrigger as side chains

A new single‐/two‐photon sensitive monomer, (E)‐5‐(4‐ethoxystyryl)?2‐nitrobenzyl methacrylate (ENbMA), was synthesized and copolymerized with methyl methacrylate (MMA) to form a series of photosensitive copolymers P(ENbMA–MMA)s that were well characterized by ¹H NMR and GPC. The photochemical and photophysical properties of both photosensitive monomer and copolymers upon visible light irradiation were studied by UV–Vis, FTIR, and HPLC spectra, which confirmed that 5‐(4‐ethoxystyryl)‐2‐nitrobenzyl ester can be photolyzed effectively with generation of the corresponding 5‐(4‐ethoxystyryl)‐2‐nitrosobenzaldehyde and carboxylic acid groups. The successful photocleavage endowed the optimized copolymers with excellent micropatterning property due to the effective generation of alkaline‐soluble carboxylic acid groups. Moreover, the high two‐photon absorption cross‐sections (over 20 GM at 800 nm) and the comparable photolysis upon two‐photon NIR light irradiation of the chromophores provided the copolymers with significant application in two‐photon microfabrication. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4099–4106, 2013     

A facile strategy for the functionalization of poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] materials

Recently, a new type of phosphazene‐containing material, poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] (PZS), was successfully prepared. PZS materials including PZS nanotubes, PZS nanofibers and PZS microspheres show excellent thermal stability, biocompatibility and biodegradability. Moreover, PZS‐containing materials such as silver nanowire/PZS, carbon nanotube/PZS and Fe₃O₄/PZS nanotubes have also been prepared. Therefore, we explored a specific method for the functionalization of these PZS and PZS‐containing materials to expand their scope of application. As a model of various PZS and PZS‐containing materials, PZS microspheres (PZSMs) were functionalized via surface‐initiated atom transfer radical polymerization (ATRP). Polymerization of styrene occurred at surface sites covalently derivatized with ATRP initiators to form PZSM–polystyrene. The number‐average molecular weight (M_n) of grafted polymer chains could be well controlled. Furthermore, PZSM–polystyrene was still active for further block copolymerization of methyl methacrylate. Both styrene‐ and acrylate‐type monomers could be directly polymerized or block copolymerized from the surface of PZS and PZS‐containing materials using surface‐initiated ATRP. M_n of grafted polymer chains could be well controlled. This facile strategy could pave the way for a wider range of applications of these materials. Copyright © 2010 Society of Chemical Industry     

Synthesis,characterization, and antitumor activity of poly(maleic anhydride‐co‐vinyl acetate‐co‐acrylic acid)

The ternary copolymerization of maleic anhydride (MA), vinyl acetate (VA), and acrylic acid (AA) [P(MA‐co‐VA‐co‐AA)], which is considered to be an acceptor–donor–acceptor system, was carried out in 1,4‐dioxane with benzoyl peroxide as an initiator at 70°C under a nitrogen atmosphere. Constants of complex formation for the monomer systems in the study were determined by UV–visible (hydrogen‐bonding complex) and ¹H‐NMR (charge transfer complex) methods, respectively. The results show that polymerization of the P(MA‐co‐VA‐co‐AA) system proceeds by an alternating terpolymerization mechanism. It is shown that the synthesized copolymers have typical polyelectrolyte behavior, ability for reversible hydrolysis–anhydrization reactions, and semicrystalline structures. In these cases, including radical polymerization, and formation of semicrystalline structures, the hydrogen‐bonding effect plays a significant role. The in vitro cytotoxicities of the synthesized terpolymer and alternating copolymer were evaluated using Raji cells (human Burkitt lymphoma cell line). The antitumor activities of prepared anion‐active copolymers were studied using methyl–thiazol–tetrazolium colorimetric assay and 50% of the cytotoxic dose of each copolymer and terpolymer were calculated. Hydrolyzed P(MA‐co‐VA‐co‐AA) and P(MA‐alt‐AA) copolymers have sufficiently high antitumor activity, which depends on the amount of hydrogen‐bonding carboxylic groups and their regular distribution in the side chain of functional macromolecules. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3425–3432, 2006     

Silica‐supported (nBuCp)2ZrCl2: effect of catalyst active center distribution on ethylene–1‐hexene copolymerization

Metallocenes are a modern innovation in polyolefin catalysis research. Therefore, two supported metallocene catalysts—silica/MAO/(ⁿBuCp)₂ZrCl₂ (Catalyst 1) and silica/ⁿBuSnCl₃/MAO/(ⁿBuCp)₂ZrCl₂ (Catalyst 2), where MAO is methylaluminoxane—were synthesized, and subsequently used to prepare, without separate feeding of MAO, ethylene–1‐hexene Copolymer 1 and Copolymer 2, respectively. Fouling‐free copolymerization, catalyst kinetic stability and production of free‐flowing polymer particles (replicating the catalyst particle size distribution) confirmed the occurrence of heterogeneous catalysis. The catalyst active center distribution was modeled by deconvoluting the measured molecular weight distribution and copolymer composition distribution. Five different active center types were predicted for each catalyst, which was corroborated by successive self‐nucleation and annealing experiments, as well as by an extended X‐ray absorption fine structure spectroscopy report published in the literature. Hence, metallocenes impregnated particularly on an MAO‐pretreated support may be rightly envisioned to comprise an ensemble of isolated single sites that have varying coordination environments. This study shows how the active center distribution and the design of supported MAO anions affect copolymerization activity, polymerization mechanism and the resulting polymer microstructures. Catalyst 2 showed less copolymerization activity than Catalyst 1. Strong chain transfer and positive co‐monomer effect—both by 1‐hexene—were common. Each copolymer demonstrated vinyl, vinylidene and trans‐vinylene end groups, and compositional heterogeneity. All these findings were explained, as appropriate, considering the modeled active center distribution, MAO cage structure repeat units, proposed catalyst surface chemistry, segregation effects and the literature that concerns and supports this study. While doing so, new insights were obtained. Additionally, future research, along the direction of the present work, is recommended. © 2013 Society of Chemical Industry     

Syntheses of new amino‐functionalized methacrylates and their use in free radical polymerizations

For use in emulsion and solution copolymerization a series of novel amino‐functional methacrylates has been synthesized, most of which have seldom, or never, been described in the literature before. In this investigation, the preparation of the hydrochloric and/or tosylate salt of the monomers aminoethyl, 3‐amino‐1‐propyl, 5‐amino‐1‐pentyl, 6‐amino‐1‐hexyl and 11‐amino‐1‐undecyl methacrylate will be described, along with the characterization of the parameters water solubility, pK_a and chemical stability. The homopolymers of these monomers have been prepared and characterized. Results show the occurrence of an acyl migration upon neutralization of the monomers aminoethyl‐ and 3‐amino‐1‐propyl methacrylate. This migration does not occur in the monomer 5‐amino‐1‐pentyl methacrylate, which makes it possible to synthesize the neutralized monomer although, after neutralization, a Michael addition occurs, resulting in a limited lifetime. Copolymerizations have been performed in emulsion. The monomer aminopentyl methacrylate especially proved to be suitable for emulsion copolymerizations when used under controlled conditions. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1401–1415, 2001     

Monomers for Adhesive Polymers 12 Synthesis and Free‐Radical Homo‐ and Copolymerization of 2‐Ethoxycarbonylallyl 5‐(1,2‐dithiolane‐3‐yl)‐pentanoate

The 2‐ethoxycarbonylallyl 5‐(1,2‐dithiolane‐3‐yl)‐pentanoate monomer (AODS) includes in its molecular structure C?C and S? S reactive bonds allowing it to behave as a bi‐functional monomer, possessing two groups, however, with different reactivity for use in polymer chain building. The polymerization‐specific features of this monomer are the absence of auto‐acceleration and polymer chain crosslinking. Polymerization proceeds readily through most free‐radical initiators. One exception, carboxy‐peroxides are rapidly decomposed without the production of free radicals. AODS is partially converted to a gel without the consumption of double bonds during monomer dissolution in certain organic solvents and after being mixed in solution with carboxy‐peroxides. The determined AODS‐co‐MMA copolymerization parameters are r₁ = 2.61, r₂ = 0.23 if Luperco peroxide is used as a polymerization initiator, and r₁ = 2.71, r₂ = 0.38 if AIBN is used.