Ag nanoparticles loaded TiO2/MWCNT ternary nanocomposite: A visible-light-driven photocatalyst with enhanced photocatalytic performance and stability

A visible light active photocatalyst, Ag/TiO₂/MWCNT was synthesized by loading of Ag nanoparticles onto TiO₂/MWCNT nanocomposite. The photocatalytic activity of Ag/TiO₂/MWCNT ternary nanocomposite was evaluated for the degradation of methylene blue dye under UV and visible light irradiation. Ag/TiO₂/MWCNT ternary nanocomposite exhibits (~9 times) higher photocatalytic activity than TiO₂/MWCNT and (~2 times) higher than Ag/TiO₂ binary nanocomposites under visible light irradiation. The enhancement in the photocatalytic activity is attributed to the synergistic effect between Ag nanoparticles and MWCNT, which enhance the charge separation efficiency by Schottky barrier formation at Ag/TiO₂ interface and role of MWCNT as an electron reservoir. Effect of different scavengers on the degradation of methylene blue dye in the presence of catalyst has been investigated to find the role of photogenerated electrons and holes. Simultaneously, the Ag/TiO₂/MWCNT shows excellent photocatalytic stability. This work highlights the importance of Ag/TiO₂/MWCNT ternary nanocomposite as highly efficient and stable visible-light-driven photocatalyst for the degradation of organic dyes.     

Photodegradation of o‐Cresol with Ag Deposited on TiO2 under Visible and UV Light Irradiation

This study investigated the effect of dosage of Ag on the characteristics of TiO₂, quantum yield, and temporal decomposition behavior of o‐cresol in an annular reactor under ultraviolet (UV) and visible light irradiation. In order to extend light absorption and minimize the rapid recombination during photoreaction, the Ag deposited on TiO₂ photocatalysts was prepared by a photodeposition process. The results of diffuse reflectance spectra (DRS) indicated that Ag deposited on TiO₂ promoted the optical absorption in the visible region and made it possible for it to be excited by visible light. The degradation rate of o‐cresol with 0.50 wt % Ag/TiO₂ under visible light irradiation was 2.0 times that with pure TiO₂.     

Photoassisted mineralization of remazole red F3B over NiO/TiO2 and CdO/TiO2 nanoparticles under simulated sunlight

In this work, a series of titania-supported NiO and CdO materials were synthesized by a modified sol-gel process. The prepared photocatalysts were characterized by X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), and transmission electron microscopy (TEM). The activities of titania-supported NiO and CdO photocatalysts for photocatalytic degradation of Remazole Red F3B (RR) dye, under simulated sunlight, were investigated. The photocatalytic mineralization of an RR dye solution over various NiO-x/TiO₂ and CdO-x/TiO₂ photocatalysts under simulated sunlight was investigated. It was worthy noticing that the photocatalytic activity of titania improved using the prepared catalysts. The prepared TiO₂, NiO-5/TiO₂, and CdO-2/TiO₂ photocatalysts exhibited higher photocatalytic activity under simulated sunlight than did commercial TiO₂. The prepared photocatalysts were stable after photocatalytic degradation of the dye. The observed photocatalytic mineralization of the dye was 51 and 71% over NiO-10/TiO₂ and CdO-2/TiO₂ after 180 min of irradiation, respectively. Juxtaposing a p-NiO-5/TiO₂ semiconductor provided a potential approach for decreasing charge recombination. The prepared photocatalystsNiO-5/TiO₂ and CdO-2/TiO₂ are promising composites for the solar detoxification of textile wastewater.     

Laser-Induced Silver Nanoparticles on Titanium Oxide for Photocatalytic Degradation of Methylene Blue

Silver nanoparticles doped on titanium oxide (TiO₂) were produced by laser-liquid interaction of silver nitrate (AgNO₃) in isopropanol. Characteristics of Ag/TiO₂ (Ag doped TiO₂) nanoparticles produced by the methods presented in this article were investigated by XRD, TEM, SEM, EDX, and UV-Vis. From the UV-Vis measurements, the absorption of visible light of the Ag/TiO₂ photocatalysts was improved (additional absorption at longer wavelength in visible light region) obviously. The photocatalytic efficiency of Ag/TiO₂ was tested by the degradation of methylene blue (MB) in aqueous solution. A maximum of 82.3% MB degradation is achieved by 2.0 wt% Ag/TiO₂ photocatalyst under 2 h illumination with a halogen lamp.     

A unique Cu2O/TiO2 nanocomposite with enhanced photocatalytic performance under visible light irradiation

A unique Cu₂O/TiO₂ nanocomposite with high photocatalytic activity was synthesized via a two-step chemical solution method and used for the photocatalytic degradation of organic dye. The structure, morphology, composition, optical and photocatalytic properties of the as-prepared samples were investigated in detail. The results suggested that the Cu₂O/TiO₂ nanocomposite is composed of hierarchical TiO₂ hollow microstructure coated by a great many Cu₂O nanoparticles. The photocatalytic performance of Cu₂O/TiO₂ nanocomposite was evaluated by the photodegradation of methylene blue (MB) under visible light, and compared with those of the pure TiO₂ and Cu₂O photocatalysts synthesized by the identical synthetic route. Within 120 min of reaction time, nearly 100% decolorization efficiency of MB was achieved by Cu₂O/TiO₂ photocatalyst, which is much higher than that of pure TiO₂ (26%) or Cu₂O (32%). The outstanding photocatalytic efficiency was mainly ascribed to the unique architecture, the extended photoresponse range and efficient separation of the electron-hole pairs in the Cu₂O/TiO₂ heterojunction. In addition, the Cu₂O/TiO₂ nanocomposite also retains good cycling stability in the photodegradation of MB.     

AgBr@Ag/TiO2 core–shell composite with excellent visible light photocatalytic activity and hydrothermal stability

AgBr@Ag/TiO₂ core–shell photocatalysts were fabricated by a facile green route. TiO₂ was uniformly coated on the surface of cubic AgBr, making AgBr@Ag/TiO₂ core–shell photocatalyst show excellent hydrothermal stability. Beneficial from that Ag nanoparticles and AgBr can respond to visible light and core–shell structure can effectively separate the photogenerated electrons and holes, AgBr@Ag/TiO₂ core–shell composites exhibited outstanding visible light photocatalytic activity for the degradation of acid orange 7. The activity of AgBr@Ag/TiO₂ is related to the thickness of TiO₂ shell, and the optimal shell thickness for obtaining the highest activity is 10 nm.     

Highly visible light responsive metal loaded N/TiO2 nanoparticles for photocatalytic conversion of CO2 into methane

Photocatalytic reduction of carbon dioxide (CO₂) into valuable hydrocarbon such as methane (CH₄) using water as reducing agent is a good strategy for environment and energy applications. In this study, a facile and simple sol-gel method was employed for the synthesis of metal (Cu and Ag) loaded nanosized N/TiO₂ photocatalyst. The prepared photocatalysts were characterized by X-ray diffraction, transmission electron microscopy, BET Surface area analyzer, X-ray photoelectron spectroscopy and UV–vis diffuses reflectance spectroscopy. The photocatalytic conversion of CO₂ into methane was carried out under visible light irradiation (λ≥420 nm) by prepared photocatalysts in order to evaluate the photocatalytic efficiency. The results demonstrate that Ag loaded N/TiO₂ showed enhanced photocatalytic performance for methane production from CO₂ compared to other Cu–N/TiO₂, N/TiO₂ and TiO₂ photocatalysts. The improvement in the photocatalytic activity could be attributed to high specific surface area, extended visible light absorption and suppressed recombination of electron – hole pair due to synergistic effects of silver and nitrogen in the Ag–N/TiO₂ photocatalyst. This study demonstrates that Ag–N/TiO₂ is a promising photocatalytic material for photocatalytic reduction of CO₂ into hydrocarbons under visible light irradiation.     

Photocatalytic activity of TiO2 supported on multi-walled carbon nanotubes under simulated solar irradiation

TiO₂ particles supported on multi-walled carbon nanotubes (MWCNTs) were prepared using a sol–gel method to investigate their photocatalytic activity under simulated solar irradiation for the degradation of methyl orange (MO) in aqueous solution. The prepared composites were analyzed using XRD, SEM, EDS and UV–vis absorption spectroscopy. The results of this study indicated that there was little difference in the shape and structure of MWCNTs/TiO₂ composite and pure TiO₂ particles. The composite exhibited enhanced absorption properties in the visible light range compared to pure TiO₂. The degradation of MO by MWCNTs/TiO₂ composite photocatalysts was investigated under irradiation with simulated solar light. The results of this study indicated that MWCNTs played a significant role in improving photocatalytic performance. Different amounts of MWCNTs had different effects on photodegradation efficiency, and the most efficient MO photodegradation was observed for a 2% MWCNT/TiO₂ mass ratio. Photocatalytic reaction kinetics were described using the Langmuir–Hinshelwood (L–H) model. The photocatalyst was reused for eight cycles, and it retained over 95.2% photocatalytic degradation efficiency. Possible decomposition mechanisms were also discussed. The results of this study indicated that photocatalytic reactions with TiO₂ particles supported on MWCNTs under simulated solar light irradiation are feasible and effective for degrading organic dye pollutants.     

Microwave-assisted synthesis of Ag–TiO2/graphene composite for hydrogen production under visible light irradiation

Novel photocatalysts based on silver (Ag), TiO₂, and graphene were successfully synthesized by microwave-assisted hydrothermal method. The prepared photocatalysts were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) specific surface area analysis, X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The influence of silver loading and graphene incorporation on photocatalytic hydrogen (H₂) production of as-prepared samples was investigated in methanolic aqueous solution under visible light irradiation (λ≥420 nm). The results showed that Ag–TiO₂/graphene composite had appreciably enhanced photocatalytic H₂ production performance under visible light illumination compared to pure TiO₂, Ag–TiO₂ and TiO₂/graphene samples. The enhanced photocatalytic hydrogen production activity of Ag–TiO₂/graphene composite under visible light irradiation could be attributed to increased visible light absorption, reduced recombination of photogenerated charge carriers and high specific surface area. This novel study provides more insight for the development of novel visible light responsive TiO²⁻ graphene based photocatalysts for energy applications.     

Effect of the sonication and coating time on the photocatalytic degradation of TiO2, TiO2-Ag,and TiO2-ZnO thin film photocatalysts

Abstract

Today, the ultrasound utilizing for material synthesis has been extensively investigated. The unusual acoustic cavitation phenomenon caused by ultrasonic waves has created a new world for the production of high efficiency photocatalysts with new structures. In this study, TiO₂, TiO₂-Ag, and TiO₂-ZnO thin film photocatalysts were prepared using titanium isopropoxide Ti[OCH(CH₃)₂]₄, zinc acetate dehydrates (CH₃COO)₂Zn·2H₂O, and silver nitrate AgNO₃ by a sol–gel method under the ultrasonic irradiation. The prepared photocatalysts were characterized by UV–vis diffuse reflectance spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), and energy dispersive spectroscopy. The SEM images showed that the Ag and ZnO particles were evenly dispersed in the photocatalysts due to the ultrasonic irradiation, and Ag particles were approximately 90?nm, which is relatively small compared to the photocatalysts which is not treated with ultrasonic irradiation. The catalytic activity of the photocatalysts was determined using Acid Red 27 dye. The most excellent catalytic degradation was obtained with TiO₂-ZnO thin film photocatalyst. In comparison to the conventional photocatalyst, the efficiency of photocatalytic activity of the photocatalyst produced under ultrasonication has been increased due to the reduced size of Ag and ZnO and its uniform dispersion.     

Hydrothermal preparation of Ag-TiO2 nanostructures with exposed {001}/{101} facets for enhancing visible light photocatalytic activity

Nano-composite materials of Ag nanoparticles dispersed TiO₂ nanocubes with exposed {001}/{101} crystal faces were fabricated mainly via a flexible one-step method of hydrothermal treatment with different content of Ag from 1 up to 3 mol%. Prepared photocatalysts were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscopy, UV–vis absorption spectroscopy, X-ray photoelectron spectroscopy and Raman spectroscopy. These analysis was carried out for understanding the contribution of different content of silver for enhancing the photocatalytic activity of TiO₂ nanocubes. Prepared silver nanoparticles had small particle size and grafted to the {101} crystal face of TiO₂ with the role of template control agent and linking agent. The photocatalytic performance of Ag-TiO₂ nanocubes were researched via Rhodamine B dye removal under visible light irradiation ( ≧420 nm). Ag-TiO₂ composite materials with the content of 2 mol% Ag showed the best photocatalytic activity for degradation of Rhodamine B, which was five times more than bare TiO₂ and associated with the localized surface plasmon resonance (LSPR) propelled effect. The mechanism by which silver enhanced the photocatalytic activity of TiO₂ was also demonstrated.     

One-pot synthesis of bifunctionalized TiO<Subscript>2</Subscript> mesoporous photocatalyst with visible light response

A series of Fe-doped SH/TiO₂ mesoporous photocatalysts have been firstly prepared by one-pot method using P123 as structure-directing agent. This bifunctionalized mesoporous TiO₂ possesses perfect anatase crystal structure and high surface area. The surface area of Fe-doped SH/TiO₂ mesoporous material is 4 times higher than that of P25. Based on the EPR results, it was found that trivalent Fe ions exist at low spin state and substitutes a part of Ti⁴⁺ ions into TiO₂ lattice. Fe-dropping in TiO₂ extends the adsorption band side of the resulting material to about 600 nm. Much high photocatalytic activity in the degradation of phenanthrene was obtained on the bifunctionalized mesoporous TiO₂ under visible light irradiation (λ > 420 nm), which is 6 times higher than that of pristine mesoporous TiO₂. The enhancement in the photocatalytic activity of bifunctionalized TiO₂ is ascribed to the extended absorption to visible light and strong interaction between SH-groups and PHE molecules.     

Increasing of Photocatalytic Performance of TiO2 Nanotubes by Doping AgS and CdS

Highly ordered titanium nanotubes (TiO₂ NTs) photocatalyst was prepared by the anodic oxidation method, and AgS, CdS, and AgS/CdS nanoparticles were doped on the surface of TiO₂ NTs by the successive ion adsorption and reaction (SILAR) method. The photocatalysts were characterized by SEM, EDS, XRD, and potentiostat system. The SEM and EDS analyses respectively show that the average outer diameter of prepared photocatalysts is in the range of 50–120?nm, and the presence of Ti, O, Ag, and Cd is successfully proved. The photocatalytic properties of TiO₂ NTs and doped TiO₂ NTs were studied by measuring the degradation of Methylene Blue (MB) solution. The experimental results show that AgS/CdS/TiO₂ photocatalyst exhibited most efficient photocatalytic activity with 340?µA/cm² photocurrent value. AgS/CdS/TiO₂ NTs photocatalyst shows up to 22.20% higher than TiO₂ NTs, 16.42% higher than CdS/TiO₂ NTs, and 4.3% higher than AgS/TiO₂ NTs.     

Titania and Noble Metals Deposited Titania Catalysts in the Photodegradation of Tartazine

Nanoparticles of TiO₂ were synthesised by sol–gel technique and photo deposition of about 1% noble metal (M/TiO₂, M = Ag, Au, and Pt) on TiO₂ was carried out. The catalysts were characterised by XRD, TEM, BET, FT-IR, and UV–Visible spectroscopy. Using commercial TiO₂ (P-25 Degussa), the conditions such as dye concentration, catalyst weight and pH were optimized for complete decolourisation of textile dye tartazine (TAZ) under UV and visible irradiations. Among the catalysts tested, the synthesised TiO₂ showed better photocatalytic activity than TiO₂ (P-25 Degussa). Whereas, M/TiO₂ catalysts showed remarkable photocatalytic activity towards the decolourisation of TAZ even under visible irradiation. This enhanced activity of M/TiO₂ catalyst may be attributed to the trapping of conduction band electrons by noble metals.     

TiO<Subscript>2</Subscript> porous ceramic/Ag–AgCl composite for enhanced photocatalytic degradation of dyes under visible light irradiation

TiO₂ porous ceramic/Ag–AgCl composite was prepared by incorporating AgCl nanoparticles within the bulk of TiO₂ porous ceramic followed by reducing Ag⁺ in the AgCl particles to Ag⁰ species under visible light irradiation. The porous TiO₂ ceramic was physically robust and chemically durable, and the porous structure facilitated the implantation of AgCl NPs. Compared with the bare TiO₂ ceramic, TiO₂ porous ceramic/Ag–AgCl composite exhibited higher photocatalytic performance for the degradation of MO and RhB under visible light irradiation. The reaction rate constants k of MO and RhB degradation over TiO₂ porous ceramic/Ag–AgCl composite was respectively 6.25 times and 3.62 times higher than those recorded over the bare TiO₂ porous ceramic. The photocatalytic activity showed virtually no decline after four times cyclic experiments under visible light irradiation. Scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, UV–Vis diffuse reflectance spectroscopy, photoluminescence spectra and X-ray photoelectron spectroscopy were used to characterize the TiO₂ porous ceramic/Ag–AgCl composite.     

Preparation of TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> composite oxide and its photocatalytic degradation of rhodamine B

The composite semiconductor photocatalyst TiO₂/SiO₂ was prepared by template-hydrothermal method using carbon spheres as the template. The structural and optical properties of TiO₂/SiO₂ were characterized by XRD, SEM, BET, UV–Vis DRS, TG-DTA, PL techniques. The formation of hydroxyl radical on the surface of TiO₂/SiO₂ was studied with terephthalic acid as the probe molecule, combined with fluorescence technique. The results showed that the specific surface area of TiO₂/SiO₂ composite was 327.9 m²/g, and the specific surface area of TiO₂/SiO₂ was larger than that of pure TiO₂. Photocatalytic degradation of rhodamine B showed that TiO₂/SiO₂ composite oxide under visible light illumination 40 min, the degradation rate was 98.6 % and the degradation rate of pure TiO₂ was only 11.9 %. The apparent first-order rate constant of TiO₂/SiO₂ was 33 times that of pure TiO₂ and more than 6 times that of P25 when the molar ratio of Ti to Si was 1:1 under visible light irradiation. Moreover, it’s also as much as 5 times that of pure TiO₂ and is more than 1 times that of P25 under UV light irradiation 25 min. Based on the experimental results, ^·O₂ ^? and h⁺ were suggested to be the major active species which was responsible for the degradation reaction. The increased photocatalytic activity of TiO₂/SiO₂ may be mainly attributed to effectively suppressing the recombination of hole/electron pairs. After the photocatalyst TiO₂/SiO₂ was reused 5 times, the degradation rate of rhodamine B could reach 89.2 % under visible light irradiation. Moreover, The composite semiconductor photocatalyst TiO₂/SiO₂ was selective towards the degradation of rhodamine B.     

Photoelectrocatalytic properties of Ag nanoparticles loaded TiO2 nanotube arrays prepared by pulse current deposition

A pulse current deposition technique was adopted to construct highly dispersed Ag nanoparticles on TiO₂ nanotube arrays which were prepared by the electrochemical anodization. The morphology, crystallinity, elemental composition, and UV-vis absorption of Ag/TiO₂ nanotube arrays were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). In particular, the photoelectrochemical properties and photoelectrocatalytic activity under UV light irradiation and the photocatalytic activity under visible light irradiation for newly synthesized Ag/TiO₂ nanotube arrays were investigated. The maximum incident photon to charge carrier efficiency (IPCE) value of Ag/TiO₂ nanotube arrays was 51%, much higher than that of pure TiO₂ nanotube arrays. Ag/TiO₂ nanotube arrays exhibited higher photocatalytic activities than the pure TiO₂ nanotube arrays under both UV and visible light irradiation. The photoelectrocatalytic activity of Ag/TiO₂ nanotube arrays under UV light irradiation was 1.6-fold enhancement compared with pure TiO₂ nanotube arrays. This approach can be used in synthesizing various metal-loaded nanotube arrays materials.     

Preparation and characterization of Cu2O/TiO2 nano–nano heterostructure photocatalysts

Cu₂O/TiO₂ nano–nano heterostructures with different concentrations of Cu₂O were prepared by an alcohol-aqueous based chemical precipitation method, and were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy and UV–vis diffuse reflection absorption spectra. The photocatalytic efficiency of the Cu₂O/TiO₂ heterostructures was evaluated by degradation of Acid Orange II in water under UV–vis light and visible light irradiation. The results show that the heterostructures have dramatically improved photocatalytic activity comparing with pure TiO₂ (P25). The prepared Cu₂O/TiO₂ heterostructures with the Cu₂O concentrations of 30% and 70% have the best photocatalytic efficiencies, which are 6 times and 27 times higher than that of pure TiO₂ (P25) under UV–vis light and visible light irradiation, respectively.     

Construction of ternary Ag@ZnO/TiO2 fibrous membranes with hierarchical nanostructures and mechanical flexibility for water purification

Rational design of semiconductor membrane photocatalyst with good mechanical flexibility and excellent photocatalytic activity is of significance for environmental remediation. Herein, flexible Ag@ZnO/TiO₂ fibrous membranes with hierarchical nanostructures were fabricated through combining a simple electrospinning method and subsequent hydrothermal reaction and photodeposition process. In the ternary nanocomposite, ZnO nanorods were firmly anchored onto TiO₂ nanofibers, while Ag nanoparticles were evenly decorated on the surface of both ZnO and TiO₂. Benefiting from the improved light absorption, large surface area, and effective charge separation, the resultant Ag@ZnO/TiO₂ membranes displayed superior photocatalytic degradation efficiency of 91.6% toward tetracycline hydrochloride within 1 h, and also exhibited prominent antibacterial activity with a 6.5 log inactivation of E. coli after 1 h simulated solar light exposure. Significantly, the membrane photocatalyst still preserved structural integrity and mechanical flexibility after utilization. This study provides an alternative approach for designing and synthesizing flexible TiO₂-based membrane photocatalysts toward high-efficiency water purification.     

Experimental analysis and optimization of the synthesizing property of nitrogen‐modified TiO2 visible‐light photocatalysts

BACKGROUND: The aim of this study was to investigate improvement of the photocatalytic activity of visible‐light driven nitrogen‐modified TiO₂ (N‐TiO₂) powder toward methyl blue (MB) and direct blue‐86 (DB‐86) dyes. The Taguchi method with an L₉ orthogonal array was applied to plan the synthesis parameters, i.e. nitrogen sources, nitrogen source concentrations, stirring time and calcined temperatures. 95% confirmation experiments were undertaken to verify the effectiveness of the Taguchi method. RESULTS: All N‐TiO₂ photocatalysts were shifted toward the visible light region with the optical band gap (Eg). Nitrogen source concentrations were significant parameters for the photocatalytic decolorization rate constants (k values). In comparison with pure TiO₂, the photodecolorization behavior of N‐TiO₂ toward DB‐86 was superior with a reaction rate constant of 1.68 × 10^?3 min^?1, and a 4 h photodecolorization efficiency of 34%. CONCLUSION: The Taguchi method was reported to alter the surface properties of commercial Degussa P25 TiO₂, which could then be used as a visible‐light driven photocatalyst. The visible‐light‐driven photocatalyst was investigated to determine material characteristics. Greater photodecolorization of MB and DB‐86 dye pollutants using optimally‐prepared N‐TiO₂ under visible light irradiation was successfully obtained. Copyright © 2011 Society of Chemical Industry