INFLUENCE OF NONUNIFORM TWISTED TAPE ON HEAT TRANSFER ENHANCEMENT CHARACTERISTICS

An experimental study of heat transfer and friction factor characteristics in a circular tube fitted by twisted tapes with nonuniform twist ratios is reported. The twisted tapes are used as swirl generators playing roles as heat transfer enhancers. The nonuniform twisted tapes examined in the present work have (1) sequentially increasing twist ratios (SL), (2) sequentially decreasing twist ratios (LS), (3) repeatedly increasing-decreasing twist ratios (SL/SL), (4) repeatedly decreasing-increasing twist ratios (LS/LS), (5) intermittently increasing-decreasing twist ratios (SL→LS), and (6) intermittently decreasing-increasing twist ratios (LS→SL). In addition, three different typical twisted tapes with twist ratios of 3.0, 4.0, and 5.0 (TT) were also evaluated. Apparently, LS yields monotonically increasing swirling intensity and SL decreasing swirling intensity, resulting in lower heat transfer rate and friction factor than the other four nonuniform twisted tapes, which possess extra fluid fluctuation. However, among the tapes tested, the SL/SL offers the maximum thermal performance factor of around 1.03, which corresponds to Nusselt number of around 36% and friction factor of 3.57 times over those of the plain tube.     

扭曲片管强化传热技术在裂解炉中的应用

对扭曲片管强化传热技术在裂解炉上的应用进行了模拟和试验。结果表明，扭曲片管影响下游的距离为50～60倍直径。扭曲片管应用于裂解炉时，炉管压降增加20％～30％，管壁温度下降至少20℃．处理量增加7％，且对裂解炉的正常操作无不利影响。     

HEAT TRANSFER IN TUBES FITTED WITH TRAPEZOIDAL-CUT AND PLAIN TWISTED TAPE INSERTS

Experimental investigation of heat transfer and friction factor characteristics of a circular tube fitted with plain twisted tapes (PTT) and trapezoidal-cut twisted tapes (TTT) with twist ratios y = 2.0, 4.4, and 6.0 was carried out. The experimental data obtained from plain tube and PTT were verified with the standard correlation to ensure the validation of experimental results. The experimental results revealed that heat transfer rate, friction factor, and thermal enhancement factor in the tube equipped with TTT were significantly higher than in the tube fitted with PTT and the plain tube. The additional disturbance and secondary flow in the vicinity of the tube wall generated by the TTT compared to that induced by the PTT was determined as the reason for enhancement. Subsequently, an empirical correlation was also formulated to match with experimental results with ±6% and ±5% variation respectively for Nusselt number and the friction factor.