Moisture Sorption Isotherms of Domestic and Imported Milk Powders and Their Calculated Heat of Sorption

This experiment investigated the moisture sorption isotherms (MSI) of domestic and imported milk powders at 15, 25, and 35°C. The MSI of the milk powders showed sigmoid curves for all samples. Also, equilibrium moisture content (EMC) decreased with increasing temperature, and the monolayer moisture content of the domestic samples was higher than that of the imported samples. So, the heat of sorption was higher at low water activity, indicating that the required sorption energy of the domestic samples was lower than that of the imported samples. Accordingly, this experiment determined the optimal storage conditions for stability as well as the energy required for the drying process of domestic and imported milk powders.     

DESORPTION ISOTHERMS OF WATER IN TRIFOLIATE YAM )Dioscorea dumetorum Pax.(

Abstract

Desorption isotherms of water in trifoliate yam (Dioscorea dumetorum Pax) were determined using a dynamic gravimetric method at temperatures of 20°, 34°, 46° and 62°C, in the relative humidity range from 11 to 86% A nonlinear least squares regression program was used to fit the measured data to the Modified Henderson, the Modified Halsey, the Chung-Pfost, and the GAB sorption models. The GAB model gave the best fit. The net isosteric heat of sorption, estimated using the Clasius-Clapeyron equation, ranged from 1412 kJ/kg at a moisture content of 0.05 kg/kg, dry basis, to 325 kJ/kg at 0.20 kg/kg. Results obtained in this study should be important in controlling the water content of yam during processing, handling, packaging and storage.     

Sorption Characteristics of Whole Pistachio Nuts (Pistacia Vera L.)

ABSTRACT

Moisture sorption characteristics of whole pistachio nuts were investigated at 10, 20, and 30°C using the static method. The sorption isotherms exhibited hysteresis over the range of 0.10-0.80 water activity which was succesfully interpreted using BET, GAB, Oswin, Smith, Henderson, Chung-Pfost and Halsey mathematical models and from which the BET, GAB and Oswin models were found to give the best fit. Monolayer moisture content of pistachio nuts was determined from BET and GAB equations and the isosteric heat of sorption data were derived using Clausius-Clapeyron equation and presented in graphical form. The information generated can be utilized to optimize the packaging parameters for long term storage of pistachio nuts.     

THE MOISTURE SORPTION ISOTHERMS OF CEFOTAXIME SODIUM SALT

ABSTRACT

The water sorption isotherms of the cefotaxime sodium salt were determined at 30 and 40° C. Cefotaxime sodium salt was maintained at equilibrium relative humidities ranging from 40 to 80 %. Equilibrium moisture content was determined by the Karl Fischer method. The moisture sorption isotherms showed that the equilibrium moisture decrease while the temperature increase. The experimental curves of equilibrium humidity were fitted by different models (Bradley, Halsey, Henderson, Kuhn, Smith and Iglesias and Chirife and GAB). Parameters of each equations were determined by non-linear regression analysis. The best fit was obtained by Iglesias and Chirife model. The isosteric heat of moisture sorption calculated by Claussius Clapeyron equation varied from 64·45 to 48·03 kJ/mol when moisture content changed from 7 to 9·5 %.     

EFFECT OF DRYING METHODS ON MOISTURE SORPTION ISOTHERMS OF FUFU AT THREE TEMPERATURES

ABSTRACT

Moisture sorption characteristics for dried fufu using three drying methods at 25°C, 32°C and 45°C were determined experimentally for water activity ranging from 0.11 to 0.96. At a given temperature and water activity, the rotary dried fufu had the highest equilibrium moisture content while the sun dried had the lowest.

Four linear and four nonlinear sorption models were used to analyze the data. The linear GAB model showed the best fit while the nonlinear Bradley model was the best over the whole range of water activity in their respective groups. Also estimates of the net isosteric heats of sorption and their dependence on moisture content were presented for each product.     

Kinetic Modeling Study on Methylene Blue Sorption onto Agave americana fibers: Fractal Kinetics and Regeneration Studies

Kinetics sorption study was carried out with varying pH, concentration, and temperature to determine the potential of Agave americana fiber for the removal of methylene blue. The thermodynamic properties (ΔG°, ΔH° and ΔS°) were determined. In order to investigate the sorption mechanisms, kinetic parameters were determined using the Lagergren, the pseudo-second order and the recently established fractal kinetic equations. The experimental kinetics data have been fitted with the non linear form of the new Brouers sotolongo kinetic model. Fractal kinetic equation gives higher correlation coefficients, indicating that this model can be considered accurate for describing the sorption methylene blue kinetics.     

Survival,oxidative stability,and surface characteristics of spray dried co-microcapsules containing omega-3 fatty acids and probiotic bacteria

The objective of the study was to determine optimum inlet and outlet air temperatures of spray process for producing co-microcapsules containing omega-3 rich tuna oil and probiotic bacteria L. casei. These co-microcapsules were produced using whey protein isolate and gum Arabic complex coacervates as shell materials. Improved bacterial viability and oxidative stability of omega-3 oil were used as two main criteria of this study. Three sets of inlet (130°C, 150°C, and 170°C) and outlet (55°C, 65°C, and 75°C) air temperatures were used in nine combinations to produce powdered co-microcapsule. The viability of L. casei, oxidative stability of omega-3 oil, surface oil, oil microencapsulation efficiency, moisture content, surface elemental composition and morphology of the powdered samples were measured. There is no statistical difference in oxidative stability at two lower inlet air temperatures (130°C and 150°C). However, there was a significant decrease in oxidative stability when higher inlet temperature (170°C) was used. The viability of L. casei decreased with the increase in the inlet and outlet air temperatures. There was no difference in the surface elemental compositions and surface morphology of powdered co-microcapsules produced under these nine inlet/outlet temperature combinations. Of the range of conditions tested the co-microcapsules produced at inlet-outlet temperature 130–65°C showed the highest bacterial viability and oxidative stability of omega-3 and having the moisture content of 4.93?±?0.05% (w/w). This research shows that powdered co-microcapsules of probiotic bacteria and omega-3 fatty acids with high survival of the former and high stability against oxidation can be produced through spray drying.     

DESORPTION ISOTHERMS FOR JAPANESE NOODLE (UDON)

Desorption isotherms of Japanese noodle (udon) were obtained at 20, 30 and 40°C, and analyzed by several isotherm models. The desorption isotherm data satisfactorily correlated with the GAB equation and the Oswin and Smith equations. The binding energy of moisture was calculated by Clausius–Clapeyron equation and found to be negligibly small above the moisture content of 0.163 kg water/kg solid. The sorption enthalpy calculated from the Arrhenius plot of GAB parameter was similar to the binding energy from Clausius–Clapeyron equation at GAB monolayer moisture content.     

Crystallization and Drying of Milk Powder in a Multiple-Stage Fluidized Bed Dryer

The rationale of this study has been to use fluidized beds to crystallize amorphous spray-dried skim milk powders with multiple stages of processing at different temperatures and humidities with the aim of rapidly making mostly crystalline powders. This paper discusses the performance of a multiple-stage fluidized bed dryer, and a combination of crystallization of lactose in spray drying at high humidity (lactose nuclei formation) and subsequent fluidized bed drying. Two different combinations of spray dryer and multi-stage fluidized-bed dryer have been suggested to crystallize lactose in skim milk powder. The results show significant improvements in the crystallinity of the powders. Moisture sorption test and X-ray diffraction analysis were used to assess the crystallinity of the powders. The processed powders that were crystallized in a humid-loop spray drying combined with a two-stage fluidized-bed dryer/crystallizer showed 92% improvement in lower amorphicity by processing at different stages of 70°C, 50% RH and 80°C, 50% RH for 15 minutes. The conventionally spray-dried powders that were crystallized in a three-stage fluidized-bed dryer/crystallizer showed 87% improvement in lower amorphicity (less moisture sorption) by processing at different stages of 60°C, 50% RH; 70°C, 40% RH; and 80°C, 40% RH for 20 minutes. The multiple-stage fluidized bed system showed distinctive potential to crystallize lactose significantly in skim milk powder using an industrial-feasible process.     

A Study of the Limitations to Spray Dryer Outlet Performance

Abstract

The concept of the product moisture locus was tested in this work using a pilot-scale modified Niro spray dryer (diameter 0.8 m, height 2 m), where the residence time of the particles inside this spray dryer is lower compared with larger industrial spray dryers. The moisture contents of skim milk powder produced from spray drying skim milk (solids content 8.8% w/v) at different operating conditions, namely different swirl vane angles (0°, 25°, 30°), inlet air temperatures (170°C, 200°C, 230°C) and process fluid flowrates (1.4 kg h^?1, 1.6 kg h^?1, 1.8 kg h^?1), were compared with the predicted equilibrium moisture contents. In addition, the residence time of the particles was also increased in the spray dryer by decreasing the inlet air mass flowrate from 0.016 to 0.013 kg s^?1. The outlet moisture contents of the skim milk powder for all the 23 runs carried out in this work were within 0.4% of the equilibrium values. Thus, the skim milk powder particles were in close equilibrium with the gas inside the drying chamber. These equilibrium limitations are confirmed by other literature data (Boonyai, P. Comparative Evaluation of Soymilk Drying in a Spray Dryer and Spouted Bed of Inert Particles. M.Sc. Thesis. Asian Institute of Technology: Bangkok, Thailand, 2000; 90 pp; Harvie, D.J.E.; Langrish, T.A.G.; Fletcher, D.F. A computational fluid dynamics study of a tall-form spray dryer. Trans IChemE 2002, in press). The use of this finding to predict spray dryer performance is demonstrated by mass and energy balance calculations.     

Characteristics,Stability, and Release of Peanut Sprout Extracts in Powdered Microcapsules by Spray Drying

This study was carried out to investigate the characteristics of powdered microcapsules from peanut sprout extracts prepared by spray drying. The microcapsules were made from medium-chain triglyceride (MCT) as primary coating material and whey protein concentrate (WPC) or maltodextrin (MD) as selected secondary coating materials. The microcapsule studies conducted were microphotograph, scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR), particle size, moisture contents, sorption, zeta potential, storage stability, and in-vitro study. The surface of microcapsules coated with WPC were rough and smooth, and particle size ranged from 2.86 to 8.59 µm. An FT-IR study revealed that absorption bands at 1,537 and 1,657 cm^?1 of microcapsules can be attributed to the protein amide I and II bands of WPC overlapped by the conjugated C?C. The moisture content was 1.33% in the microcapsules coated with WPC. The moisture sorption increased until 18% at the 90% RH. The yield of peanut sprout extracts from microcapsules was 89.01%. In the in-vitro study, the microcapsules released 2.48 and 6.01% at pH 2.0 and 4.0, respectively, in simulated-gastric fluid, and 61.07 and 89.24% at pH 6.0 and 8.0, respectively, in simulated-intestinal fluid. The preservation rate of the microcapsules dropped down to 60.43% from 89.01% during six months of storage. The stability of peanut sprout extracts in the microcapsules was over 80% at 4 and 20°C during 10-day storage. The zeta-potential of microcapsules was stable with ?30 mV. Based on the data obtained from the present study, the powdered peanut-sprout-extract microcapsules coated with WPC exhibited high stability during storage. Therefore, the powdered microcapsules by spray drying may be useful as a functional ingredient.     

Intelligent Modeling and Analysis of Moisture Sorption Isotherms in Milk and Pearl Millet–Based Weaning Food “Fortified Nutrimix”

Soft computing–based intelligent models have been proposed to predict moisture sorption isotherms in milk and pearl millet–based weaning food, “fortified Nutrimix,” at four temperatures, 15, 25, 35, and 45°C over the water activity range 0.11–0.97. Connectionist and adaptive neuro-fuzzy inference system (ANFIS) models were investigated. A back-propagation algorithm with Bayesian regularization/Levenberg-Marquardt optimization mechanisms was employed to develop connectionist models. The ANFIS model was based on the Sugeno-type fuzzy inference system. In addition, several empirical models were explored for fitting the sorption data. The soft computing models, in particular, ANFIS, outperformed the conventional sorption models for predicting isotherms in Nutrimix.     

Moisture Sorption Isotherms and Storage Stability of Spray-Dried Yogurt Powder

Moisture adsorption isotherms of spray-dried yogurt powder were determined at 10, 25, and 40°C using the standard, static-gravimetric method. Experimental data were fitted to five mathematical models (Guggenheim-Anderson-de Boer [GAB], Brunauer-Emmett-Teller [BET], Halsey, modified Oswin, and modified Henderson). A nonlinear regression analysis method was used to evaluate the constants of the sorption equations. The shelf-life of yogurt powder was predicted based on the relationship between permeability coefficient of the packaging material and moisture adsorbed by the powder determined by the GAB equation. Furthermore, the storage stability of spray-dried yogurt powder in terms of quality parameters including moisture content, water activity, color change, and thiobarbituric acid (TBA) value was studied in aluminum laminated polyethylene (ALPE) pouches under storage conditions of 25°C and 50% relative humidity (RH).     

Modeling of moisture sorption isotherms of poly(vinyl alcohol)/starch films

Studies on the moisture sorption characteristics of poly(vinyl alcohol)/starch blends for water activity (a_w) values of 0.1–0.9 were performed at 27°C. The equilibrium moisture content at different a_w values was used to fit different sorption isotherm models proposed in the literature. The ranges of a_w applicable for the different sorption isotherms were reported. The model constants of the sorption equations were determined by linear fitting. The value of the coefficient of determination (0.98 ± 0.01) confirmed the goodness of fit of the equations studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3874–3881, 2003     

Evaluation of the Sorption Equilibrium and Effect of Drying Temperature on the Antioxidant Capacity of the Jaboticaba (Myrciaria cauliflora)

In recent years, interest toward berries has increased (e.g., Myrciaria cauliflora or jaboticaba) because of their high phenolic content (phenolic acids, flavonoids, and anthocyanins) that has been associated with positive effects on consumer health and which play an important role in the antioxidant properties of food. This study analyzed the sorption isotherms, thermodynamic properties of sorption (isosteric heat and Gibbs free energy), and the evolution of the antioxidant capacity during the drying process. The effects of drying temperatures of 40°, 50°C, and 60°C on the antioxidant capacity and thermodynamic properties of sorption were evaluated. The gravimetric static method for sorption isotherm determination over a range of relative humidity levels from 0.10 to 0.90 was used. The sorption isotherms exhibited a Type II behavior, typical for many foods. The Guggenheim, Anderson, and Boer (GAB); Oswin; Peleg; and Lewicki models were used to fit the experimental data, and it was determined that the GAB and Peleg models were most appropriate for describing the sorption curves. The isosteric heat and Gibbs free energy were obtained from the experimental sorption equilibrium. The isosteric heat of adsorption decreased when the moisture content increased, while the Gibbs free energy increased. In addition, the phenolic content and antioxidant capacity increased while drying at 50°C and 60°C, whereas these factors decreased at 40°C. Our results provide the food industry with information concerning the best drying conditions to preserve antioxidant properties.     

MODELING WATER SORPTION IN OKARA SOY MILK

ABSTRACT

Moisture sorption isotherms of okara soy milk were determined using the gravimetric method in the range 20 - 50 °C. The sorption isotherms exhibited hysteresis along all the water activity range (0·1 - 0·9). The amount of sorbed water increased as the temperature was decreased. The GAB and Halsey models gave a good fit for okara isotherms over the range of water activity 0·1 - 0·9. As temperature increased, GAB k-values increased towards unity where the GAB equation reduces to the BET equation. The influence of temperature on the constants of GAB and Halsey models was evaluated through Arrhenius-type equations. The Clausius Clapeyron equation was used to estimate the isosteric heats of sorption.     

Equilibrium Moisture Content and Heat of Sorption of Longan (Dimocarpus longan Lour.)

The equilibrium moisture contents of longan were determined experimentally using the dynamic method at temperatures ranging from 30 to 50°C and water activity ranging from 11 to 97%. The sorption isotherm curves of longan were sigmoidal in shape and decreased with increased temperature at constant relative humidity. Five selected isotherm models were tested to fit the experimental isotherm data of longan. The GAB model fitted the best to the experimental data of longan and the modified Oswin model was the next to the GAB model. The agreement between the best-fitted models and experimental data was excellent. The isosteric heats of sorption, determined from equilibrium data using the Clausius-Clapeyron equation, were found to be a function of moisture content.     

Effect of Relative Humidity on the Antioxidant Activity of Spray-Dried Banana Passion Fruit (Passiflora Mollisima Baley)-Coated Pulp: Measurement of the Thermodynamic Properties of Sorption

The antioxidant activity of the spray-dried banana passion fruit-coated pulp with maltodextrin10 DE was evaluated throughout 30 days of storage at a temperature of 25°C for different relative humidity values It was influenced by the relative humidity throughout the 30 days of storage. In addition, the sorption equilibria of water for spray-dried banana passion fruit-coated pulp with maltodextrin 10 DE at 25, 35, 45, and 55°C, over a range of relative humidity levels from 0.113 to 0.843, was determined using a gravimetric static method. The isosteric heat and Gibbs free energy were calculated from the sorption equilibrium. The Guggenheim-Anderson-Boer (GAB) and Brunauer-Emmett-Teller (BET) models were tested to fit the experimental data. The GAB model was found to be the most suitable for describing the sorption curves, exhibiting an error smaller than 10% and an r greater than 0.99. The monolayer moisture content values for the sorption at different temperatures that were calculated using the GAB model ranged between 0.05315 to 0.05716 g water/g dry matter. The sorption curves exhibited a Type III behavior. The isosteric heat decreased with increasing moisture content while the Gibbs free energy increased.     

Moisture sorption characteristics of waste activated sludge

Nowadays the treatment of activated sludge often includes a thermal drying step. Data such as water vapour sorption isotherms and heat of sorption are required for good design and control of the drying processes. An equilibrium method was used to measure these data on domestic activated sludge, between 39 °C and 80 °C. The experimental investigation indicated that the nature of the sludge and its evolution (bulking sludge, anaerobic storage) do not affect the sorption isotherms. Experimental data were fitted to different well‐known models; the Oswin relationship gave the better fit. Based on sorption data the heat of sorption as a function of moisture content was determined. © 2001 Society of Chemical Industry     

The Effects of Moisture on Physical Properties of Spray-Dried Egg Powder

The aim of this study was to evaluate the effect of moisture on the glass transition temperature (T _g ), flow properties, color, and morphology of spray-dried powdered egg. Powdered egg was stored under environments with different relative humidities at 25°C and the moisture sorption isotherm was determined. The Guggenhiem-Anderson-de Boer (GAB) model fitted the isotherm data well. A differential scanning calorimeter was used to determine the T _g of samples with different water activities. The T _g data were satisfactorily correlated by the Gordon-Taylor model. The results showed that the glass transition temperature of powdered egg decreased with increasing water activity. The changes in flowability based on the Carr index (CI) and cohesiveness based on the Hausner ratio (HR) with water activity were defined. At low water activity values, the powder had poor flowability and high cohesiveness. These flow properties were also supported with scanning electron microscope (SEM) images.