Evaporated YBa2Cu3O7 thin films and device technology

Epitaxial thin films of YBa₂Cu₃O₇ were grown by evaporation of the metals from electron-guns in the presence of atomic oxygen. The films were characterized structurally by X-ray diffraction and electrically by measurements of d.c. magnetization and flux creep. The progress in device technology is discussed. Results are presented on Josephson junctions, and a superconducting microwave filter with the ground plane grown on the back.     

Enhancement of critical current density of YBa2Cu3O7 − δ thin films by self-assembly of Y2O3 nanoparticulates

YBa₂Cu₃O_7 − δ (YBCO) thin films, possessing high critical current density (J_c), have been synthesized by embedding a homogeneous array of Y₂O₃ non-superconducting nanoclusters/nanoparticles using a pulsed laser deposition technique. The size, interparticle spacing, and density of Y₂O₃ nanoparticles in YBCO thin films were tailored by varying the number of laser pulses in order to determine the optimum size for effective immobilization of vortices. Scanning transmission electron microscopy with atomic number contrast and X-ray diffraction techniques were used to determine the size and structure of the nanoparticles. Both techniques indicate that the Y₂O₃ particles are epitaxial with respect to the surrounding YBCO matrix. The information about pinning of vortices by the nanoparticles was obtained by investigating the behavior of critical current density as a function of temperature and applied field, which in turn determines the vortex density in the sample. The superconducting transition temperature (T_c) of YBCO films with the inclusion of nanoparticles was observed to remain almost the same or decrease marginally (1-2 K) with respect to T_c of pure YBCO films deposited under identical conditions. However, J_cs of YBCO films embedded with self-assembled nanoparticles were found to be significantly higher than that of pure YBCO films. The J_c enhancement was up to five times in high magnetic field, which is a key requirement for practical application of high-T_c materials.     

Current transport across grain boundaries in superconducting YBa2Cu3O7 films

Superconducting transport properties of YBa₂Cu₃O₇ grain boundaries have been investigated. The results of these experiments are summarized.     

Twinning of YBa2Cu3O7 thin films on different substrates

The twinning of YBa₂Cu₃O₇ (YBCO) thin films with c-axis orientation on (001) MgO, (001) SrTiO₃, (012) LaAlO₃, (110) NdGaO₃ and (001) NdGaO₃ substrates, prepared by laser ablation, has been examined using a combination of and θ/2θ scans at a four-circle diffractometer. On all substrates, except for (001) NdGaO₃, the tetragonal to orthorhombal phase transition results in four different orientations of YBCO twins relating to the substrate. On (001) NdGaO₃ only two different twin orientations, accompanied by a slight lattice monoclinization, has been observed.     

High-resolution and analytical transmission electron microscopy of epitaxial YBa2Cu3O7−x thin films and YBa2Cu3O7/PrBa2Cu3O7 superlattices

Transmission electron microscopy (TEM) studies of epitaxial YBa₂Cu₃O_7−x thin films and YBa₂Cu₃O₇/PrBa₂Cu₃O₇ superlattices are summarized. High-resolution imaging of cross-sections and plan views and energy-dispersive X-ray microanalysis and electron energy loss spectroscopy in the transmission electron microscope were the methods applied. In the first section results on YBa₂Cu₃O_7−x thin films With varying oxygen stoichiometry deposited onto SrTiO₃ are discussed. Then, YBa₂Cu₃O₇/PrBa₂Cu₃O₇ superlattices deposited onto SrTiO₃ and MgO are investigated. Finally, an interface analysis of high-quality YBa₂Cu₃O_7−x thin films deposited onto sapphire with yttrium-stabilized zirconia buffer layers is presented.     

Low frequency magnetic shielding of YBa2Cu3O7-δ: Agx high temperature superconductors

Two measurement systems were used to investigate the low frequency magnetic shielding behavior of pure YBa₂Cu₃O_7−δ, silver doped YBa₂Cu₃O_7−δ, a packed powder, a laser ablated thin film and copper. It was found that factors which influence low frequency magnetic shielding include material composition, microstructure and properties, external a.c. and d.c. fields and sample dimensions. Among the experimental materials, only bulk ceramics showed good shielding factors which were constant with frequency in the range 10–3000 Hz. A macroscopic shielding current was necessary for a good shield. The thickness of the ceramic played a crucial role in shielding. Flux breakthrough occurred when the external field exceeded a certain value. The breakthrough field increased with sample thickness. The influence of d.c. fields on the shielding behaviour depended on the history and magnitudes of the fields. Magnetic shielding hysteresis was observed and its potential application is discussed.     

Process monitoring during post-annealing of YBa2Cu3O7 thin films containing fluorine

The post-annealing method of producing thin films of YBa₂Cu₃O₇ (YBCO) has taken on a new impetus due to the recent work showing that films of the highest quality can be made by using low partial pressures of oxygen during the annealing cycle. Here it is shown that for films produced by using BaF₂ as a source material, the post-annealing procedure can be closely controlled by monitoring the F that evolves due to the water vapor reaction with BaF₂. The use of an ion-sensitive electrode allowed small F evolution rates (about 1 ng s^–1) to be detected above background, sufficient to measure the F evolution rate from even the smallest samples used. The time interval during which F evolves was found to increase with increasing YBCO film area being annealed.     

Surface planarization and masked ion-beam structuring of YBa2Cu3O7 thin films

Surface planarization and masked ion-beam structuring (MIBS) of high-T_c superconducting (HTS) YBa₂Cu₃O_7-δ (YBCO) thin films grown by pulsed-laser deposition (PLD) method is reported. Chemical-mechanical polishing, plasma etching, and oxygen annealing of YBCO films strongly reduce the particulate density (~ 10^-2 ×) and surface roughness (~ 10^-1 ×) of as-grown PLD layers. The resistivity, critical temperature T_c ≈ 90 K and critical current density J_c (77 K) > 1 MA/cm² of films are not deteriorated by the planarization procedure. The YBCO films are modified and patterned by irradiation with He⁺ ions of 75 keV energy. Superconducting tracks patterned by MIBS without removal of HTS material and, for comparison, by wet-chemical etching show same T_c and J_c(T) values. Different micro- and nano-patterns are produced in parallel on planarized films. The size of irradiated pattern depends on the mask employed for beam shaping and features smaller than 70 nm are achieved.     

Phonon structures in tunneling conductance of superconducting YBa2Cu3O7

We report on measurements of the tunneling conductance structures above the superconducting gap energy using YBa₂Cu₃O₇ polycrystalline junctions. The measured second derivative data are reproducible among the junctions, and the intensities of the common structures at the biases of 37–38, 47–53, 67–77, and 94–95 mV are strong enough to be assigned. These structures are in agreement with those in the neutron phonon density of states in whole energy regions when the energies are measured from the gap edge of 26±1 meV. This correspondence indicates that the electron-phonon interaction contributes to the pairing mechanism of this superconductor.     

Characterization of YBa2Cu3O7/PrBa2Cu3O7 superlattices

We investigated the structural and superconducting properties ofc-axis oriented (YBa₂Cu₃O₇) _nY /(PrBa₂Cu₃O₇) _npr superlattices with thicknesses of the individual layers down to one unit cell (10nY1; 18>nPr 1). By transmission electron microscopy and X-ray diffraction we find an excellent structural quality of the samples, though the quantitative analysis shows the existence of defects. In superlattices with decoupled YBa₂Cu₃O₇ layers of two unit cell thickness we find a highT _c value of 75 K. We probed the flux line structure in the superlattices by measurements of the critical current density in magnetic fields. The experiments show that the flux-line dynamics is dominated by the movement of pancake vortices.     

Specific heat of YBa2Cu3O7

Specific heat measurements, including measurements in magnetic fields and at both low temperatures and nearT _c , on a number of YBa₂Cu₃O₇ samples have revealed several correlations among strongly sample-dependent parameters. These correlations suggest that the sample dependence of the parameters reflects a sample dependence of the volume fraction of superconductivity, which is in turn correlated with a low concentration of Cu²⁺ moments. The correlations give a criterion for recognizing the values of the parameters characteristic of the fully superconducting material. Preliminary results on the effects of sample heat treatment are reported. New data on the linear term is presented and discussed.     

Scanning tunneling microscopy of laser-deposited YBa2Cu3O7 thin films on Y-stabilized zirconia substrate

The surface morphology and growth mechanism ofc-oriented YBa₂Cu₃O₇ thin films deposited on Y-stabilized zirconia substrate by laser deposition has been investigated with scanning tunneling microscopy. Both screw dislocation and layered island growth processes took place. Surface features such as screw dislocation, steps, subgrain boundaries, holes, and troughs were present, suggesting that they may act as pinning sites for flux lines. A thin layer of nonsuperconducting material with a thickness of a few angstroms is seen on the surface of the film.     

A phenomenological theory for the spin-glass ordering in Fe doped YBa2Cu3O7+y

A phenomenological theory for spin-glass superconductor, based on a generalized Ginzburg-Landau free-energy functional d0epending on superconducting and spin-glass order parameters, is presented. It is found that the coupling between the superconducting and spin-glass order assists in freezing spins by enhancing the spin-glass order parameter but acts as a pair breaking effect for superconducting order by decreasing the superconducting order parameter. The schematic behavior of several thermodynamic quantities has been discussed. It is found that all these quantities show either cusps or discontinuities at the superconducting and/or spinglass transition temperatures.     

Microstructural study of YBa2Cu3O7/SrTiO3/YBa2Cu3O7 heteroepitaxial trilayer films grown on (100) SrTiO3 substrates

Detailed transmission electron microscopic study has been carried out on heteroepitaxial YBa₂Cu₃O₇/SrTiO₃/YBa₂Cu₃O₇ trilayer thin films grown on (100)SrTiO₃ substrates prepared by DC and RF magnetron sputtering. The microstructural results showed the existence of somea-axis-oriented YBCO grains 20–90 nm wide in thec-axis-oriented YBCO matrix. Some of thea-axis grains in the lower YBCO thin film layer have protruded into the above SrTiO₃ layer, which may cause short circuit between the two YBCO superconducting layers. This is unsuitable for the application of trilayer thin films for microelectronic devices. The defects on the surface of the substrates would also influence the growth quality of the YBCO thin films.     

Degradation of thin films of YBa2Cu3O7 by annealing in air and in vacuum

The degradation of epitaxial thin films of YBa₂Cu₃O₇ has been studied as a function of annealing temperature in air and in vacuum; some samples had an evaporated overlayer of CaF₂. Degradation was monitored by the measurement of electrical properties after consecutive 30-min annealing treatments. The room-temperature resistance registered significant increases for all samples after annealing at temperatures above about 200°C; the critical current density at 77 K was degraded for annealing temperatures 400°C in air, and 200–250°C in vacuum. By annealing in oxygen at 550°C, electrical properties were restored in degraded bare YBCO samples annealed in vacuum, but not for those annealed in air.     

Raman scattering studies of ultrathin-layer YBa2Cu3O7/PrBa2Cu3O7 superlattices

We present Raman scattering studies ofc-oriented ultrathin-layer superconducting (YBa₂Cu₃O₇) _m /(PrBa₂Cu₃O₇) _n superlattices. For the superlattice with (m=2,n=1) sequence, Raman spectra reveal a new line in the spectral region around 320 cm^–1. It is interpreted as a mode representing a combination of IR optical phonons of the Y-sublayers with an admixture of aB _1g type Raman active vibration in the Pr sublayers. This new line, which is similar to those from the interior of the Brillouin zone of the original lattice, does not exhibit superconductivity-induced self-energy effects, although its counterpart in the pure substance does. No additional line is found in the (m=1,n=2) superlattice in the same region, supporting our interpretation for the (m=2,n=1) sample.     

An experimental investigation of YBa2Cu3O7 films at millimeter-wave frequencies

We have measured the millimeter-wave (100 GHz) surface resistance of high-quality laserdeposited YBa₂Cu₃O₇ films on SrTiO₃ and LaA10₃ substrates. Due to finite film thickness, radiation losses are important in the normal state and in the superconducting state nearT _c. These effects are calculated andR _s characteristic of the ohmics losses in the film are extracted from the data. The surface resistanceR _s drops rapidly atT _c, and a detailed comparison with calculations which include finite mean free path effects suggests a gap which exceeds the weak coupling BCS limit.     

Preparation and characterization of YBa2Cu3O7−x high Tc superconducting thin films deposited by S-gun sputtering

We have prepared YBa₂Cu₃O_7−x high T_c superconducting (HTS) thin films on (100) yttria-stabilized zirconia (YSZ) and LaAlO₃ (LAO) substrates, using a 2 kW S-gun in an off-axis mode. By varying the temperature of the substrates, films with a axis and c axis orientations were readily obtained. The X-ray diffraction pattern and Laue pattern confirmed that films with a axis orientation exhibited a single-crystal texture. All films had a good mirror-like surface. For films grown on YSZ substrates, scanning electron microscopy (SEM) revealed a clear distinction between the surfaces of the films grown at various temperatures (520–780°C). Films grown on LAO substrates exhibited even smoother and flatter surfaces. The SEM changes will be discussed in correlation with J_c. The best HTS thin films were obtained on LAO substrates at a temperature of 820°C, with T_c=89 K and J_c=1×10⁶ A cm^-2 (77 K).     

Investigations on TlBa2Ca2Cu3Ox superconducting thin films formation on LaAlO3 substrate

Investigations on pure superconducting phase TlBa₂Ca₂Cu₃O_x (Tl-1223) thin films formation, of about 100-125 nm in thickness, on (001) LaAlO₃ single crystal substrate, were made using radio-frequency sputtering deposition of Ba₂Ca₂Cu₃O_x precursor films and ex-situ thallination in sealed quartz tube. The precursor films were thallinated under different conditions of partial oxygen pressure, temperature, time and y thallium source content using unreacted pellets of composition Tl_yBa₂Ca₂Cu₃O_x. In all cases, strongly c-oriented multiphase films were obtained. A correlation between the Tl-1223 phase purity and the precursor film conditions of thallination is established. Temperature and time of thallination as well as the thallium source content and the partial pressure of oxygen play a key role in the quality of the obtained film. The films' onset temperature of the superconducting transition ranges between 90 and 103 K. It is shown that the best samples can be obtained from a dense precursor film and relatively medium thallination time.