Photosynthetic Linear Electron Flow Drives CO2 Assimilation in Maize Leaves

Photosynthetic organisms commonly develop the strategy to keep the reaction center chlorophyll of photosystem I, P700, oxidized for preventing the generation of reactive oxygen species in excess light conditions. In photosynthesis of C₄ plants, CO₂ concentration is kept at higher levels around ribulose 1,5-bisphosphate carboxylase/oxygenase (Rubisco) by the cooperation of the mesophyll and bundle sheath cells, which enables them to assimilate CO₂ at higher rates to survive under drought stress. However, the regulatory mechanism of photosynthetic electron transport for P700 oxidation is still poorly understood in C₄ plants. Here, we assessed gas exchange, chlorophyll fluorescence, electrochromic shift, and near infrared absorbance in intact leaves of maize (a NADP-malic enzyme C₄ subtype species) in comparison with mustard, a C₃ plant. Instead of the alternative electron sink due to photorespiration in the C₃ plant, photosynthetic linear electron flow was strongly suppressed between photosystems I and II, dependent on the difference of proton concentration across the thylakoid membrane (ΔpH) in response to the suppression of CO₂ assimilation in maize. Linear relationships among CO₂ assimilation rate, linear electron flow, P700 oxidation, ΔpH, and the oxidation rate of ferredoxin suggested that the increase of ΔpH for P700 oxidation was caused by the regulation of proton conductance of chloroplast ATP synthase but not by promoting cyclic electron flow. At the scale of intact leaves, the ratio of PSI to PSII was estimated almost 1:1 in both C₃ and C₄ plants. Overall, the photosynthetic electron transport was regulated for P700 oxidation in maize through the same strategies as in C₃ plants only except for the capacity of photorespiration despite the structural and metabolic differences in photosynthesis between C₃ and C₄ plants.     

Experimental and Theoretical Study of N2 Adsorption on Hydrogenated Y2C4H− and Dehydrogenated Y2C4− Cluster Anions at Room Temperature

The adsorption of atmospheric dinitrogen (N₂) on transition metal sites is an important topic in chemistry, which is regarded as the prerequisite for the activation of robust N≡N bonds in biological and industrial fields. Metal hydride bonds play an important part in the adsorption of N₂, while the role of hydrogen has not been comprehensively studied. Herein, we report the N₂ adsorption on the well-defined Y₂C₄H_0,1⁻ cluster anions under mild conditions by using mass spectrometry and density functional theory calculations. The mass spectrometry results reveal that the reactivity of N₂ adsorption on Y₂C₄H⁻ is 50 times higher than that on Y₂C₄⁻ clusters. Further analysis reveals the important role of the H atom: (1) the presence of the H atom modifies the charge distribution of the Y₂C₄H⁻ anion; (2) the approach of N₂ to Y₂C₄H⁻ is more favorable kinetically compared to that to Y₂C₄⁻; and (3) a natural charge analysis shows that two Y atoms and one Y atom are the major electron donors in the Y₂C₄⁻ and Y₂C₄H⁻ anion clusters, respectively. This work provides new clues to the rational design of TM-based catalysts by efficiently doping hydrogen atoms to modulate the reactivity towards N₂.     

A Changing Light Environment Induces Significant Lateral CO2 Diffusion within Maize Leaves

A leaf structure with high porosity is beneficial for lateral CO₂ diffusion inside the leaves. However, the leaf structure of maize is compact, and it has long been considered that lateral CO₂ diffusion is restricted. Moreover, lateral CO₂ diffusion is closely related to CO₂ pressure differences (ΔCO₂). Therefore, we speculated that enlarging the ΔCO₂ between the adjacent regions inside maize leaves may result in lateral diffusion when the diffusion resistance is kept constant. Thus, the leaf structure and gas exchange of maize (C₄), cotton (C₃), and other species were explored. The results showed that maize and sorghum leaves had a lower mesophyll porosity than cotton and cucumber leaves. Similar to cotton, the local photosynthetic induction resulted in an increase in the ΔCO₂ between the local illuminated and the adjacent unilluminated regions, which significantly reduced the respiration rate of the adjacent unilluminated region. Further analysis showed that when the adjacent region in the maize leaves was maintained under a steady high light, the photosynthesis induction in the local regions not only gradually reduced the ΔCO₂ between them but also progressively increased the steady photosynthetic rate in the adjacent region. Under field conditions, the ΔCO₂, respiration, and photosynthetic rate of the adjacent region were also markedly changed by fluctuating light in local regions in the maize leaves. Consequently, we proposed that enlarging the ΔCO₂ between the adjacent regions inside the maize leaves results in the lateral CO₂ diffusion and supports photosynthesis in adjacent regions to a certain extent under fluctuating light.     

In situ growth of CuInS2 nanocrystals on nanoporous TiO2 film for constructing inorganic/organic heterojunction solar cells

Inorganic/organic heterojunction solar cells (HSCs) have attracted increasing attention as a cost-effective alternative to conventional solar cells. This work presents an HSC by in situ growth of CuInS₂(CIS) layer as the photoabsorption material on nanoporous TiO₂ film with the use of poly(3-hexylthiophene) (P3HT) as hole-transport material. The in situ growth of CIS nanocrystals has been realized by solvothermally treating nanoporous TiO₂ film in ethanol solution containing InCl₃ · 4H₂O, CuSO₄ · 5H₂O, and thioacetamide with a constant concentration ratio of 1:1:2. InCl₃ concentration plays a significant role in controlling the surface morphology of CIS layer. When InCl₃ concentration is 0.1 M, there is a layer of CIS flower-shaped superstructures on TiO₂ film, and CIS superstructures are in fact composed of ultrathin nanoplates as ‘petals’ with plenty of nanopores. In addition, the nanopores of TiO₂ film are filled by CIS nanocrystals, as confirmed using scanning electron microscopy image and by energy dispersive spectroscopy line scan analysis. Subsequently, HSC with a structure of FTO/TiO₂/CIS/P3HT/PEDOT:PSS/Au has been fabricated, and it yields a power conversion efficiency of 1.4%. Further improvement of the efficiency can be expected by the optimization of the morphology and thickness of CIS layer and the device structure.     

Enhancement of C2H6 Oxidation by O2 in the Presence of N2O over Fe Ion-Exchanged BEA Zeolite Catalyst

Selective catalytic reduction (SCR) of N₂O with C₂H₆ took place effectively over Fe ion-exchanged BEA zeolite catalyst (Fe-BEA) even in the presence of excess oxygen. The mechanism in the SCR of N₂O with C₂H₆ over Fe-BEA catalyst was studied by a transient response experiment and an in situ DRIFT spectroscopy. No oxidation of C₂H₆ by O₂ took place below 350 °C (in C₂H₆/O₂). In the N₂O/C₂H₆/O₂ system, however, it was found that the reaction of C₂H₆ with O₂ was drastically enhanced by the presence of N₂O even at low temperatures (200-300 °C). Therefore, it was concluded that N₂O played an important role in the oxidation of C₂H₆ (i.e., activation of C₂H₆ at an initial step). On the basis of these findings, the mechanism in the SCR of N₂O with C₂H₆ is discussed.     

Influence of TiO2 and CeO2 on the hydrogenation activity of bulk Ni2P

TiO₂- and CeO₂-promoted bulk Ni₂P catalysts were prepared by impregnation and in-situ H₂ temperature-programmed reduction method. The prepared catalysts were characterized by XRD and XPS. The hydrogenation activities of the catalysts were studied using 1.5 wt.% 1-heptene in toluene and 1.0 wt.% phenylacetylene in ethanol as the model feeds. The results indicate that bulk Ni₂P possesses low hydrogenation activity but is tunable by simply controlling the content of the additives (TiO₂ or CeO₂), suggesting that TiO₂ and CeO₂ are effective promoters to enhance the hydrogenation activity of Ni₂P.     

Physiological and Biochemical Regulation Mechanism of Exogenous Hydrogen Peroxide in Alleviating NaCl Stress Toxicity in Tartary Buckwheat (Fagopyrum tataricum (L.) Gaertn)

We aimed to elucidate the physiological and biochemical mechanism by which exogenous hydrogen peroxide (H₂O₂) alleviates salt stress toxicity in Tartary buckwheat (Fagopyrum tataricum (L.) Gaertn). Tartary buckwheat “Chuanqiao-2” under 150 mmol·L⁻¹ salt (NaCl) stress was treated with 5 or 10 mmol·L⁻¹ H₂O₂, and seedling growth, physiology and biochemistry, and related gene expression were studied. Treatment with 5 mmol·L⁻¹ H₂O₂ significantly increased plant height (PH), fresh and dry weights of shoots (SFWs/SDWs) and roots (RFWs/RDWs), leaf length (LL) and area (LA), and relative water content (LRWC); increased chlorophyll a (Chl a) and b (Chl b) contents; improved fluorescence parameters; enhanced antioxidant enzyme activity and content; and reduced malondialdehyde (MDA) content. Expressions of all stress-related and enzyme-related genes were up-regulated. The F3′H gene (flavonoid synthesis pathway) exhibited similar up-regulation under 10 mmol·L⁻¹ H₂O₂ treatment. Correlation and principal component analyses showed that 5 mmol·L⁻¹ H₂O₂ could significantly alleviate the toxic effect of salt stress on Tartary buckwheat. Our results show that exogenous 5 mmol·L⁻¹ H₂O₂ can alleviate the inhibitory or toxic effects of 150 mmol·L⁻¹ NaCl stress on Tartary buckwheat by promoting growth, enhancing photosynthesis, improving enzymatic reactions, reducing membrane lipid peroxidation, and inducing the expression of related genes.     

Direct formation of H2O2 from H2 and O2 and decomposition/hydrogenation of H2O2 in aqueous acidic reaction medium over halide-containing Pd/SiO2 catalytic system

Formation of H₂O₂ from H₂ and O₂ and decomposition/hydrogenation of H₂O₂ have been studied in aqueous acidic medium over Pd/SiO₂ catalyst in presence of different halide ions (viz. F⁻, Cl⁻ and Br⁻). The halide ions were introduced in the catalytic system via incorporating them in the catalyst or by adding into the reaction medium. The nature of the halide ions present in the catalytic system showed profound influence on the H₂O₂ formation selectivity in the H₂ to H₂O₂ oxidation over the catalyst. The H₂O₂ destruction via catalytic decomposition and by hydrogenation (in presence of hydrogen) was also found to be strongly dependent upon the nature of the halide ions present in the catalytic system. Among the different halides, Br⁻ was found to selectivity promote the conversion of H₂ to H₂O₂ by significantly reducing the H₂O₂ decomposition and hydrogenation over the catalyst. The other halides, on the other hand, showed a negative influence on the H₂O₂ formation by promoting the H₂ combustion to water and/or by increasing the rate of decomposition/hydrogenation of H₂O₂ over the catalyst. An optimum concentration of Br⁻ ions in the reaction medium or in the catalyst was found to be crucial for obtaining the higher H₂O₂ yield in the direct synthesis.     

Catalytic steam reforming of ethane and propane over CeO2-doped Ni/Al2O3 at SOFC temperature: Improvement of resistance toward carbon formation by the redox property of doping CeO2

Ni/Al₂O₃ with the doping of CeO₂ was found to have useful activity to reform ethane and propane with steam under Solid Oxide Fuel Cells (SOFCs) conditions, 700-900 °C. CeO₂-doped Ni/Al₂O₃ with 14% ceria doping content showed the best reforming activity among those with the ceria content between 0 and 20%. The amount of carbon formation decreased with increasing Ce content. However, Ni was easily oxidized when more than 16% of ceria was doped. Compared to conventional Ni/Al₂O₃, 14%CeO₂-doped Ni/Al₂O₃ provides significantly higher reforming reactivity and resistance toward carbon deposition. These enhancements are mainly due to the influence of the redox properties of doped ceria. Regarding the temperature programmed reduction experiments (TPR-1), the redox properties and the oxygen storage capacity (OSC) for the catalysts increased with increasing Ce doping content. In addition, it was also proven in the present work that the redox of these catalysts are reversible, according to the temperature programmed oxidation (TPO) and the second time temperature programmed reduction (TPR-2) results.During the reforming process, in addition to the reactions on Ni surface, the gas-solid reactions between the gaseous components presented in the system (C₂H₆, C₃H₈, C₂H₄, CH₄, CO₂, CO, H₂O, and H₂) and the lattice oxygen (O_x) on ceria surface also take place. The reactions of adsorbed surface hydrocarbons with the lattice oxygen (O_x) on ceria surface (C_nH_m+O_x→nCO+m/2(H₂)+O_x−n) can prevent the formation of carbon species on Ni surface from hydrocarbons decomposition reaction (C_nH_m⇔nC+m/2H₂). Moreover, the formation of carbon via Boudard reaction (2CO⇔CO₂+C) is also reduced by the gas-solid reaction of carbon monoxide (produced from steam reforming) with the lattice oxygen (CO+O_x⇔CO₂+O_x−1).     

Anodic TiO2 Nanotube Arrays for Dye-Sensitized Solar Cells Characterized by Electrochemical Impedance Spectroscopy

This paper reports on the microstructure of anodic titanium oxide (TiO₂) and its use in a dye-sensitized solar cell (DSSC) device. When voltages of 60 V were applied to titanium foil for 2 hr under 0.25 wt% NH₄F+ 2 vol% H₂O+C₂H₄(OH)₂, TiO₂ with a nanotube structure was formed. The film, which had a large surface area, was used as an electron transport film in the DSSC. The DSSC device had a short-circuit current density (J_sc) of 12.52 mA cm⁻², a fill factor (FF) of 0.65, an open-voltage (V_oc) of 0.77 V, and a photocurrent efficiency of 6.3% under 100% AM 1.5 light. The internal impedance values under 100%, 64%, 11%, and 0% (dark) AM 1.5 light intensities were measured and simulated using the electrical impedance spectroscopy (EIS) technique. The impedance characteristics of the DSSC device were simulated using inductors, resistors, and capacitors. The Ti/TiO₂, TiO₂/Electrolyte, electrolyte, and electrolyte/(Pt/ITO) interfaces were simulated using an RC parallel circuit, and the bulk materials, such as the Ti, ITO and conducting wire, were simulated using a series of resistors and inductors. The impedance of the bulk materials was simulated using L₀+R₀+R_b, the impedance of the working electrode was simulated using (C₁//R₁)//(R_a+(C₂//R₂), the electrolyte was simulated using C₃//R₃, and the counter electrode was simulated using C₄//R₄.     

A novel 2D luminescent lead(II) framework with 3-carboxylic acid-4H-1,2,4-triazole based on binuclear Pb2Cl2(H2O)2 building blocks

Under hydrothermal conditions using a triazole derivative ligand 3-carboxylic acid-4H-1,2,4-triazole (HL) and corresponding lead(II) salts, a novel two-dimensional(2D) lead(II) complex {[Pb(L)(μ₂-Cl)(H₂O)}_n (1) has been isolated. In 1 Pb₂Cl₂(H₂O)₂ building blocks can be observed, which are extended by tetra-dentate coordinated L ligands to form a 2D corrugated layered structure. 1 also represents a novel example of luminescent lead(II) frameworks with triazole derivatives. Solid-state fluorescence spectrum of 1 exhibits the excited peak at 376 nm while the emission peak at 604 nm.     

Adsorption Studies of Volatile Organic Compound (Naphthalene) from Aqueous Effluents: Chemical Activation Process Using Weak Lewis Acid,Equilibrium Kinetics and Isotherm Modelling

This study deals with the preparation of activated carbon (CDSP) from date seed powder (DSP) by chemical activation to eliminate polyaromatic hydrocarbon—PAHs (naphthalene—C₁₀H₈) from synthetic wastewater. The chemical activation process was carried out using a weak Lewis acid of zinc acetate dihydrate salt (Zn(CH₃CO₂)₂·2H₂O). The equilibrium isotherm and kinetics analysis was carried out using DSP and CDSP samples, and their performances were compared for the removal of a volatile organic compound—naphthalene (C₁₀H₈)—from synthetic aqueous effluents or wastewater. The equilibrium isotherm data was analyzed using the linear regression model of the Langmuir, Freundlich and Temkin equations. The R² values for the Langmuir isotherm were 0.93 and 0.99 for naphthalene (C₁₀H₈) adsorption using DSP and CDSP, respectively. CDSP showed a higher equilibrium sorption capacity (q_e) of 379.64 µg/g. DSP had an equilibrium sorption capacity of 369.06 µg/g for C₁₀H₈. The rate of reaction was estimated for C₁₀H₈ adsorption using a pseudo-first order, pseudo-second order and Elovich kinetic equation. The reaction mechanism for both the sorbents (CDSP and DSP) was studied using the intraparticle diffusion model. The equilibrium data was well-fitted with the pseudo-second order kinetics model showing the chemisorption nature of the equilibrium system. CDSP showed a higher sorption performance than DSP due to its higher BET surface area and carbon content. Physiochemical characterizations of the DSP and CDSP samples were carried out using the BET surface area analysis, Fourier-scanning microscopic analysis (FSEM), energy-dispersive X-ray (EDX) analysis and Fourier-transform spectroscopic analysis (FTIR). A thermogravimetric and ultimate analysis was also carried out to determine the carbon content in both the sorbents (DSP and CDSP) here. This study confirms the potential of DSP and CDSP to remove C₁₀H₈ from lab-scale synthetic wastewater.     

Synergism Between Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Au/TiO<Subscript>2</Subscript> in the Low Temperature Oxidation of Propene

CO impedes the low temperature (<170 °C) oxidation of C₃H₆ on supported Pt. Supported Au catalysts are very effective in the removal of CO by oxidation, although it has little propene oxidation activity under these conditions. Addition of Au/TiO₂ to Pt/Al₂O₃ either as a physical mixture or as a pre-catalyst removes the CO and lowers the light-off temperature (T ₅₀) for C₃H₆ oxidation compared with Pt catalyst alone by ~54 °C in a feed of 1% CO, 400 ppm C₃H₆, 14% O₂, 2% H₂O.     

Two-step hydrothermal synthesis of Ru-Sn oxide composites for electrochemical supercapacitors

A two-step hydrothermal process was developed to synthesize hydrous 30RuO₂-70SnO₂ composites with much better capacitive performances than those fabricated through the normal hydrothermal process, co-annealing method, or modified sol-gel procedure. A very high specific capacitance of RuO₂ (C_S,Ru), ca. 1150 F g⁻¹, was obtained when this composite was synthesized via this two-step hydrothermal process with annealing in air at 150 °C for 2 h. The voltammetric currents of this annealed composite were found to be quasi-linearly proportional to the scan rate of CV (up to 500 mV s⁻¹), demonstrating its excellent power property. From Raman, UV-vis spectroscopic and TEM analyses, the reduction in mean particulate size is clearly found for this two-step oxide composite, attributable to the co-precipitation of (Ru_δSn_1−δ)O₂·xH₂O onto partially dissolved SnO₂·xH₂O and the formation of (Ru_δSn_1−δ)O₂·xH₂O crystallites in the second step. This effect significantly promotes the utilization of RuO₂ (i.e., very high C_S,Ru). The excellent capacitive performances, very similar to that of RuO₂·xH₂O, suggest the deposition of RuO₂-enriched (Ru_δSn_1−δ)O₂·xH₂O onto SnO₂·xH₂O seeds as well as the individual formation of (Ru_δSn_1−δ)O₂·xH₂O crystallites in the second hydrothermal step.     

Kinetic modeling of storage and reduction with different reducing agents (CO, H2, and C2 H4) on a Pt–Ba/-Al2O3 catalyst in the presence of CO2 and H2O

In this paper a global reaction kinetic model is used to understand and describe the NO_x storage/reduction process in the presence of CO₂ and H₂O. Experiments have been performed in a packed bed reactor with a Pt–Ba/γ-Al₂O₃ powder catalyst (1 wt% Pt and 30 wt% Ba) with different lean/rich cycle timings at different temperatures (200, 250, and ) and using different reductants (H₂, CO, and C₂H₄). Model simulations and experimental results are compared. H₂O inhibits the NO oxidation capability of the catalyst and no NO₂ formation is observed. The rate of NO storage increases with temperature. The reduction of stored NO with H₂ is complete for all investigated temperatures. At temperatures above , the water gas shift (WGS) reaction takes place and H₂ acts as reductant instead of CO. At , CO and C₂H₄ are not able to completely regenerate the catalyst. At the higher temperatures, C₂H₄ is capable of reducing all the stored NO, although C₂H₄ poisons the Pt sites by carbon decomposition at . The model adequately describes the NO breakthrough profile during 100 min lean exposure as well as the subsequent release and reduction of the stored NO. Further, the model is capable of simulating transient reactor experiments with 240 s lean and 60 s rich cycle timings.     

The Effects of H2S on the Activities of CYP2B6, CYP2D6, CYP3A4, CYP2C19 and CYP2C9 in Vivo in Rat

Hydrogen sulfide (H₂S) is a colorless, flammable, extremely hazardous gas with a “rotten egg” smell. The human body produces small amounts of H₂S and uses it as a signaling molecule. The cocktail method was used to evaluate the influence of H₂S on the activities of CYP450 in rats, which were reflected by the changes of pharmacokinetic parameters of five specific probe drugs: bupropion, metroprolol, midazolam, omeprazole and tolbutamide, respectively. The rats were randomly divided into two groups, control group and H₂S group. The H₂S group rats were given 5 mg/kg NaHS by oral administration once a day for seven days. The mixture of five probes was given to rats through oral administration and the blood samples were obtained at a series of time-points through the caudal vein. The concentrations of probe drugs in rat plasma were measured by LC-MS. In comparing the H₂S group with the control group, there was a statistically pharmacokinetics difference for midazolam and tolbutamide; the area under the plasma concentration-time curve (AUC) was decreased for midazolam (p < 0.05) and increased for tolbutamide (p < 0.05); while there was no statistical pharmacokinetics difference for bupropion, metroprolol and omeprazole. H₂S could not influence the activities of CYP2B6, CYP2D6 and CYP2C19 in rats, while H₂S could induce the activity of CYP3A4 and inhibit the activity of CYP2C9 in rats.     

Synthesis and photocatalytic properties of H2La2Ti3O10/TiO2 intercalated nanomaterial

H₂La₂Ti₃O₁₀/ TiO₂ intercalated nanomaterial was fabricated by successive intercalation reactions of H₂La₂Ti₃O₁₀ with n-C₆H₁₃NH₂/C₂H₅OH mixed solution and acid TiO₂ sol, followed by irradiating with a high-pressure mercury lamp. The intercalated materials possess a gallery height of 0.46 nm and a specific surface area of 31.58 m²·g⁻¹, which indicate the formation of a porous material. H₂La₂Ti₃O₁₀/TiO₂ shows photocatalytic activity for the decomposition of organic dye under irradiation with visible light and the activity of TiO₂ intercalated material was superior to the unsupported one.