Decomposition of activated CO2 species on Ni(110): Role of surface diffusion in the reaction mechanism

Chemisorption and decomposition of CO₂ on Ni(110) surface have been studied by means of spin-polarized density functional theory calculations. Several possible CO₂/Ni(110) conformations with similar adsorption energies were found. The bonding nature of the adsorbed CO₂ was further analyzed on the basis of partial density of states (PDOS) and effective bond order (EBO) results, indicating the enhanced charge transfer and significant activation of the CO bond. Climbing image nudged elastic bound calculations provide an insight into CO₂/Ni(110) → CO/Ni(110) + O/Ni(110) reaction mechanism. All computed reaction pathways can be separated into two stages: 1) surface diffusion of CO₂ to the one energetically favored conformation; 2) breakage of the coordinated C–O bond. The total reaction barrier (relative to the energy of CO₂/Ni(110)) was found about 0.44 eV.     

Thermally stable pseudo-third-generation Grubbs ruthenium catalysts with pyridine–phosphinimine ligand

The ligand precursors 2-(R₃PN)CH₂Py (R = Ph(1a), Cy(2a)) were prepared from reaction of pyridine azide with various phosphine ligands. Reaction of 1a or 2a with RuCl₂(CHPh)(Py)₂(H₂IMes) (Py = pyridine) afforded the ruthenium alkylidene complex RuCl₂(CHPh)(PyCH₂(NPR₃))(H₂IMes) (R = Ph(1), Cy(2)). Both catalysts showed good thermal stability and latent behavior toward RCM and ROMP reactions.     

Etherification reactions of propargylic alcohols catalyzed by a cationic ruthenium allenylidene complex

The cationic ruthenium allenylidene complex R_RuR_ax −[Ru(indenyl)L(PPh₃)CCCPh₂]⁺PF₆ catalyzes the etherification of secondary and tertiary propargylic alcohols in a formal nucleophilic substitution reaction utilizing primary and secondary alcohols as the nucleophiles. At a catalyst loading of only 1.1 mol%, the corresponding propargylic ether products were obtained in 9 to 73% isolated yields (18 h reaction time at 100 °C); no further additives are required. The reaction exhibits an induction period; as shown by a control reaction, the high reaction temperature may chemically change the allenylidene complex to be employed as the catalyst but does not lead to catalyst deactivation.     

Synthesis,X-ray structure,spectroscopic properties,and theoretical investigations of dinuclear imidazole molybdenum(VI) complex with long MoO bands

One new dinuclear multioxomolybdenum(VI) complex containing long MoO bands with imidazole, [Mo₂O₆(imi)₄] (1) (imi = imidazole), has been prepared and characterized, and the geometric structure, electronic structure and spectroscopic properties, investigated experimentally and theoretically. The rarely observed long MoO bonds in 1 (ca. 0.15 Å longer than documents previously) are analysed by orbital structure analysis. The electronic origins of the optical transitions are also mainly related to the MoO groups with ligand-to-metal charge transfer (LMCT) nature (P_terminal-oxo → d_Mo).     

Activity of Mo(II) allylic complexes supported in MCM-41 as oxidation catalysts precursors

[Mo(η³-C₃H₅)X(CO)₂(NCCH₃)₂] (X = Br, 1a; X = Cl, 1b) complexes reacted with the bidentate ligand RNC(Ph)–C(Ph)NR, R = (CH₂)₂CH₃ (DAB, 2) affording [Mo(η³-C₃H₅)X(CO)₂(DAB)] (X = Br, 4a; X = Cl, 4b), which were characterized by elemental analysis, FTIR and ¹H and ¹³C NMR spectroscopy. The modified silylated ligand RNC(Ph)C(Ph)NR, R = (CH₂)₃Si(OCH₂CH₃)₃ (DAB–Si, 3), was used to immobilize the two complexes in MCM-41 (MCM) mesoporous silica. The new materials were characterized by powder X-ray diffraction, N₂ adsorption analysis, FTIR and ²⁹Si and ¹³C CPMAS solid state NMR spectroscopy. Both the materials and the complexes were tested in the oxidation of cyclooctene and styrene and behaved as active catalyst precursors for cyclooctene and styrene epoxidation with TBHP (t-butylhydroperoxide), leading selectively to epoxides with high conversions and TOFs. Although the homogeneous systems reach 100% conversion of cyclooctene and slightly less for styrene, the loss of catalytic activity in the heterogeneous systems is small, with a 98% conversion of styrene achieved by the chloride containing material.     

Bridge-splitting of trans-[PtCl2(η2-CH2CH2)]2 by weak nucleophiles: Crystal and molecular structure of trans-[PtCl2(η2-CH2CH2)(MeCN)]

Bridge-splitting of trans-[PtCl₂(η²-CH₂CH₂)]₂, 1, by L in dichloromethane yields trans-[PtCl₂(η²-CH₂CH₂)(L)] (L = THF, 2, or MeCN, 3) with bridge-splitting equilibrium constants of 0.0289 ± 0.0007 and 3601 ± 215 mol^?1 dm³, respectively, as determined by UV/Vis measurements. The reaction of 3 in MeCN with Cl^? is essentially quantitative. The crystal structure of trans-[PtCl₂(η²-CH₂CH₂)(CH₃CN)] is reported.     

Towards osseointegration of bioinert ceramics: Can biological agents be immobilized on alumina substrates using self-assembled monolayer technique?

Immobilization of biological agents on inert alumina surfaces could promote bone growth and improve osseointegration. We hypothesize that functional groups on alumina surfaces can be used to link biological agents as a supporting factor e.g. for cell attachment. CH₂, OH, COOH, and NH₂ groups were linked to alumina surfaces using self-assembled monolayer technique (SAM). Subsequently, bovine serum albumin (BSA) was immobilized on each functionalized surface. Contact angle, bicinchoninic acid assay and immunofluorescence were used to detect immobilized BSA. The amount of BSA linked to functionalized surfaces increased in the following order CH₂ < OH < COOH = NH₂. The greatest amount, 26.1 μg/cm² of BSA was found on both, NH₂- and COOH-terminated surfaces. Cell tests confirmed cytocompatibility of all surfaces. The highest proliferation was detected on NH₂-terminated samples. Using the model protein, the results confirmed feasibility for immobilization of biological agents to inert alumina ceramic surfaces using SAM technique.     

Effect of heteroatom substituted mesoporous support on the selective hydrogenation of cinnamaldehyde in supercritical carbon dioxide

Selective hydrogenation of cinnamaldehyde (CAL) is being carried out in supercritical carbon dioxide over Pt nanoparticle, supported on Al-MCM-48 and Ti-MCM-48. To evaluate the influence of the support, results are compared with Pt-MCM-48 (Si only). Pt-Al-MCM-48 and Pt-Ti-MCM-48, (containing metal particles of similar sizes) exhibits remarkable selectivity for cinnamyl alcohol (COL). A strong influence of heteroatom (Al and Ti) substitution is found in the activity and selectivity of the reaction. The rate of formation of COL follows the order of Pt-Ti-MCM-48 > Pt-Al-MCM-48 > Pt-MCM-48 under the same reaction conditions. We therefore propose that due to the interaction of Ti with CO₂, the support becomes activated, which increases the electron density of Pt and thereby interacts preferentially with the CO bond. Depending on the nature of the heteroatom, a significant change in the CO₂ pressure dependent activity and selectivity is observed. For Pt-Al-MCM-48, the maximum selectivity for COL is observed in the higher pressure (single phase) region. On the contrary, as the interaction of Ti and CO₂ is favorable in the lower pressure region, Pt-Ti-MCM-48 shows highest selectivity for COL at 7–8.5 MPa (biphasic region) and decreases in the single phase region. Conventional Arrhenius behavior is maintained for Pt-Al-MCM-48, whereas Pt-Ti-MCM-48 displays significant decrease in the reaction rate with increasing temperature.     

Near-infrared spectroscopic solubility measurement for thermodynamic analysis of melting point depressions of biphenyl and naphthalene under high-pressure CO2

Melting temperatures of organic solids are often depressed by high-pressure CO₂ due to a dissolution of CO₂ in the molten organic compounds. For thermodynamic analysis of the melting point depression, solubilities of CO₂ in molten biphenyl and naphthalene were measured by near-infrared spectroscopy at various temperatures and pressures up to 20 MPa. Molarity of the organic component was determined from the 3ν_CH absorption band, and that of CO₂ from the 2ν₁ + ν₃ band. Mole fraction of CO₂ in the liquid phase was found to be an increasing function of the pressure up to 0.6 at 20 MPa and a weakly decreasing function of the temperature. The solubility data were used for modeling of the mixtures by the Peng–Robinson equation of state with a binary interaction parameter k₁₂. Calculation of the solid–liquid–gas phase equilibrium for the model fluid qualitatively described a large decrease in the melting temperature with increasing pressure up to 10 MPa followed by a small change at higher pressures. The melting point change was interpreted by the two competing effects: hydrostatic pressure effect increases the melting point by ca. 8 °C at 20 MPa, whereas CO₂ solubility effect reduces it by ca. 30 °C. Decomposition of the solubility effect into ideal and non-ideal mixing parts revealed that the non-ideality increases the melting point by more than 10 °C.     

Aspartic acid in a new role: Synthesis and application of a pH-responsive cyclopolymer containing residues of the amino acid

The reaction between diallylamine and dimethyl maleate afforded the Michael addition product dimethyl N,N-diallylaspartate [(CH₂CH–CH₂)₂NCH(CO₂Me)CH₂CO₂Me] I, which upon treatment with dry HCl and ester hydrolysis with aqueous HCl gave its hydrochloride salt [(CH₂CH–CH₂)₂NH⁺CH(CO₂Me)CH₂CO₂Me Cl⁻] II and N,N-diallylaspartic acid hydrochloride [(CH₂CH–CH₂)₂NH⁺CH(CO₂H)CH₂CO₂H Cl⁻] III, respectively. The new monomers II and III underwent cyclopolymerization to give, respectively, cationic polyelectrolytes (CPEs) poly(II) and poly(III). Under the influence of pH, triprotic acid (+) poly(III) was equilibrated to water-insoluble diprotic polyzwitterionic acid (±) IV, water-soluble monoprotic poly(zwitterion–anion) (± −) V, and its conjugate base polydianion (=) VI. The protonation constants of the carboxyl group and trivalent nitrogen in VI have been determined. A 20-ppm concentration of IV is effective in inhibiting the precipitation of CaSO₄ from its supersaturated solution with an ≈ 100% scale inhibition efficiency for a duration of 50 h at 40 °C. The aqueous two-phase systems (ATPSs) of VI and polyoxyethylene have been studied. The transformation of water-soluble VI to insoluble IV makes it a recycling ATPS as it can be recycled by precipitation at a lower pH.     

A novel chelate-assisted C−C bond formation on a Cd(II) complex of an asymmetric heptadentate(N7) tripodal Schiff base ligand

Cadmium(II) complexes of some potentially heptadentate tripodal Schiff base ligands with the general formula N{(CH₂)_nNCHC₅H₄N}₂{(CH₂)_mNCHC₅H₄N}) (where n = m = 2, L₂₂₂; n = 2, m = 3, L₃₂₂; n = 3, m = 2, L₃₃₂) have been studied. These ligands are products of the full condensation of a number of tripodal tetraamines with 2-pyridinecarboxaldehyde. An unusual reaction of an additional 2-pyridine-carboxaldehyde with a methylene group adjacent to the imine bond only during template preparation of [Cd(L₃₃₂)]²⁺ was observed. The latter reaction is a novel chelate-assisted C?C bond formation because it is occurred only where a rigid five-membered chelate ring is present.     

Extraction of jojoba seed oil using supercritical CO2+ethanol mixture in green and high-tech separation process

In this study, the extraction of jojoba seed oil obtained from jojoba seed using both supercritical CO₂ and supercritical CO₂+ethanol mixtures was investigated. The recovery of jojoba seed oil was performed in a green and high-tech separation process. The extraction operating was carried out at operating pressures of 25, 35 and 45 MPa, operating temperatures of 343 and 363 K, supercritical fluid flow rates of 3.33 × 10⁻⁸, 6.67 × 10⁻⁸ and 13.33 × 10⁻⁸ m³ s⁻¹, entrainer concentrations of 2, 4 and 8 vol.%, and average particle diameters of 4.1 × 10⁻⁴, 6.1 × 10⁻⁴, 8.6 × 10⁻⁴ and 1.2 × 10⁻³ m. It was found that a green chemical modifier such as ethanol could enhance the solubilities, initial extraction rate and extraction yield of jojoba seed oil from the seed matrix as compared to supercritical CO₂. In addition, it was found that the solubility, the initial extraction rate and the extraction yield depended on operating pressure and operating temperature, entrainer concentration, average particle size and supercritical solvent flow rate. The solubility of jojoba seed oil and initial extraction rate increased with temperature at the operating pressures of 35 and 45 MPa and decreased with increasing temperature at the operating pressure of 25 MPa. Furthermore, supercritical fluid extraction involved short extraction time and minimal usage of small amounts entrainer to the CO₂. About 80% of the total jojoba seed oil was extracted during the constant rate period at the pressure of 35 and 45 MPa.     

High-pressure phase equilibrium measurements and thermodynamic modeling for the systems involving CO2, ethyl esters (oleate,stearate, palmitate) and acetone

The aim of this work was to study the phase behavior of systems involving carbon dioxide (CO₂), fatty acid ethyl esters (ethyl oleate, ethyl stearate and ethyl palmitate) and acetone at high pressures. The phase behavior involving these components is an important step regarding the design and optimization of industrial processes based on supercritical conditions, such as biodiesel production and fatty esters fractionation involving supercritical and/or pressurized solvents. In addition, supercritical CO₂ can offer an interesting alternative for glycerol separation in water-free biodiesel purification processes. The binary systems investigated in this work were CO₂ + ethyl oleate, and CO₂ + ethyl stearate and these were compared with the CO₂ + ethyl palmitate system. The ternary CO₂ + ethyl palmitate + acetone was also investigated at two different ethyl palmitate to acetone molar ratios of (1:1) and (1:3). The static synthetic method using a variable-volume view cell was employed to obtain the experimental data in the temperature range of 303.15–353.15 K. Vapor–liquid (VL), liquid–liquid (LL) and vapor–liquid–liquid (VLL) phase transitions were observed in these systems. In the binary systems, the solubility increased with the presence of unsaturation and decreased with the number of carbon atoms in the fatty ester chain. Addition of acetone as well as ethanol eliminated the liquid–liquid immiscibility and reduced the pressure transitions, therefore increasing the solubility of the ester in supercritical CO₂. The experimental data sets for the binary and ternary systems were successfully modeled using the Peng–Robinson equation of state with the classical van der Waals quadratic mixing rule (PR-vdW2) and Wong-Sandler (PR-WS) mixing rule. Both models showed good performance in the phase equilibrium correlations and in predictions for the binary and ternary systems.     

Characterization of carbon nanofibers synthesized by microwave plasma-enhanced CVD at low-temperature in a CO/Ar/O2 system

The low-temperature synthesis of carbon nanofibers by microwave plasma-enhanced chemical vapor deposition using a CO/Ar/O₂ system and their characterizations were performed. At the optimum oxygen concentration of O₂/CO = 7/1000, vertically aligned CNFs can be synthesized at temperatures as low as 180 °C with growth rates of 4–6 nm/s. The diameter of bulk CNFs is about 50–100 nm and the surface of CNFs is covered by branching fibers and their nuclei with a diameter of about 5–20 nm. Not only the peaks originating from carbon chains, but also oxygen containing groups, such as CO and COC, are observed in the FTIR spectra. The CNFs growth rate is almost independent from the substrate temperature and it is concluded that an elementary process not on the substrates, but in the gas phase, is the rate-determining step in the present CO/Ar/O₂ microwave-plasma-enhanced CVD system.     

Copolymerizations of ethylene with α-olefin-ω-ols by highly active vanadium(III) catalysts bearing [N,O] bidentate chelated ligands

The copolymerizations of ethylene with polar hydroxyl monomers such as 10-undecen-1-ol, 5-hexen-1-ol and 3-buten-1-ol were investigated by the vanadium(III) catalysts bearing bidentate [N,O] ligands (1, [PhNC(CH₃)CHC(Ph)O]VCl₂(THF)₂; 2, [PhNCHC₆H₄O]VCl₂(THF)₂; 3, [PhNCHC(Ph)CHO]VCl₂(THF)₂). The polar monomers were pretreated by alkylaluminum before the polymerization. High catalytic activities and efficient comonomer incorporations can be easily obtained by changing monomer masking reagents and polymerization conditions in the presence of diethylaluminium chloride as a cocatalyst. The longer the spacer group, the higher the incorporation of the monomer. Under the mild conditions, the incorporation level of 10-undecen-1-ol reached 13.9 mol% in the resultant copolymers was obtained. The reactivity ratios of copolymerization (r₁ = 41.4, r₂ = 0.02, r₁r₂ = 0.83) were evaluated by Fineman–Ross method. According to ¹³C NMR spectra, polar units were located both on the main chain and at the chain end. The end-hydroxylated polymers were probably obtained due to the formation of dormant species after the insertion of the comonomer followed by the chain transfer to alkylaluminum. In addition, the signals derived from polar monomer inverse insertion were detected for the first time.     

Direct conversion of citrus peel waste into hydroxymethylfurfural in ionic liquid by mediation of fluorinated metal catalysts

A new green technology was developed using citrus peel waste to produce hydroxymethylfurfual (HMF). FT-IR analysis of the waste showed 4 characteristic vibration modes (CH, CO, COH, and CO/COO^?), contributing to sugars. XRD and FESEM elucidated that the waste and its hydrolysate consist of highly amorphous clusters. HCl increased HMF yield by 1.4-fold. CrF₃ increased its yield by 1.7-fold. At 0.2 of the stoichiometric ratio value, HMF yield was highest. The highest HMF yield was achieved in the reaction mixture of 4 g [OMIM]Cl, 1 mL ethyl acetate, 0.1 g CrF₃, 5 mL 0.3 M HCl, and 0.5 g biomass.     

Extraction of phenolic compounds and anthocyanins from blueberry (Vaccinium myrtillus L.) residues using supercritical CO2 and pressurized liquids

This work explored the potential of subcritical liquids and supercritical carbon dioxide (CO₂) in the recovery of extracts containing phenolic compounds, antioxidants and anthocyanins from residues of blueberry (Vaccinium myrtillus L.) processing. Supercritical CO₂ and pressurized liquids are alternatives to the use of toxic organic solvents or extraction methods that apply high temperatures. Blueberry is the fruit with the highest antioxidant and polyphenol content, which is present in both peel and pulp. In the extraction with pressurized liquids (PLE), water, ethanol and acetone were used at different proportions, with temperature, pressure and solvent flow rate kept constant at 40 °C, 20 MPa and 10 ml/min, respectively. The extracts were analyzed and the highest antioxidant activities and phenolic contents were found in the extracts obtained with pure ethanol and ethanol + water. The highest concentrations of anthocyanins were recovered with acidified water as solvent. In supercritical fluid extraction (SFE) with CO₂, water, acidified water, and ethanol were used as modifiers, and the best condition for all functional components evaluated was SFE with 90% CO₂, 5% water, and 5% ethanol. Sixteen anthocyanins were identified and quantified by ultra performance liquid chromatography (UPLC).     

Deposition of carbon nitride films using an electron cyclotron wave resonance plasma source

Hydrogenated amorphous carbon nitride (a-C:N:H) has been synthesised using a high plasma density electron cyclotron wave resonance (ECWR) technique using N₂ and C₂H₂ as source gases, at different ratios and a fixed ion energy (80 eV). The composition, structure and bonding state of the films were investigated and related to their optical and electrical properties. The nitrogen content in the film rises rapidly until the N₂/C₂H₂ gas ratio reaches 2 and then increases more gradually, while the deposition rate decreases steeply, placing an upper limit for the nitrogen incorporation at 30 at%. For nitrogen contents above 20 at%, the band gap and sp³-bonded carbon fraction decrease from 1.7 to 1.1 eV and ∼65 to 40%, respectively. The transition is due to the formation of polymeric CN, CN and NH groups, not an increase in CH bonds. Films with higher nitrogen content are less dense than the original hydrogenated tetrahedral amorphous carbon (ta-C:H) film but, because they have a relatively high band gap (1.1 eV), high resistivity (10⁹ Ω cm) and moderate sp³-bonded carbon fraction (40%), they should be classed as polymeric in nature.     

Polymerizable inorganic–organic hybrid: Syntheses and structures of mono-lacunary Dawson polyoxometalate-based olefin-containing organosilyl derivatives

Three olefin-containing organosilyl derivatives supported on the mono-lacunary Dawson polyoxometalate (POM), [α₂-P₂W₁₇O₆₁{(RSi)₂O}]⁶⁻ (R = {CH₂C(CH₃)COO(CH₂)₃}, {CH₂CHCOO(CH₂)₃} and {CH₂CH}), as Me₂NH₂ salts, which can act as precursors for the immobilization of the POMs in polymer networks, were obtained by the 2:1 molar ratio reaction of the organosilyl precursor RSi(OCH₃)₃ with K₁₀[α₂-P₂W₁₇O₆₁] · 19H₂O in acidic MeOH/H₂O mixed solutions. X-ray crystallography revealed that the two organic chains connected through an –Si–O–Si– bond were grafted onto the mono-lacunary site of the POM. The four-coordination of each Si atom was attained with the bridging oxygen atom, the terminal organic group R in the organosilyl group, and 2 of the 4 oxygen atoms in the mono-lacunary site of the POM.     

High-pressure phase equilibria for the binary system carbon dioxide + dibenzofuran

The experimental solubility of dibenzofuran in near-critical and supercritical carbon dioxide and the solid–liquid–vapor (SLV) equilibrium line for the CO₂ + dibenzofuran system are reported. The built in-house static view cell apparatus used in these measurements is described. The solubility of naphthalene in supercritical CO₂ and the CO₂ + naphthalene SLV line are also determined in order to assess the reliability and accuracy of the measurement technique. The solubility of dibenzofuran in carbon dioxide is determined at 301.3, 309.0, 319.2, 328.7 and 338.2 K in the 6–30 MPa pressure range. Solubility data are correlated using the Chrastil model and the Peng–Robinson equation of state. This equation is also used to predict the CO₂ + dibenzofuran SLV line. Results show the feasibility of using supercritical CO₂ to extract dibenzofuran.