Low percolation threshold and high electrical conductivity in melt‐blended polycarbonate/multiwall carbon nanotube nanocomposites in the presence of poly(ε‐caprolactone)

This study focuses on the electrical properties of polycarbonate (PC)/poly(ε‐caprolactone) (PCL)‐multiwall carbon nanotube (MWCNT) nanocomposites. MWCNTs were incorporated into thermoplastic PC matrix by simple melt blending using biodegradable PCL based concentrates with MWCNT loadings (3.5 wt%). Because of the lower interfacial energy between MWCNT and PCL, the nanotubes remain in their excellent dispersion state into matrix polymer. Thus, electrical percolation in PC/PCL‐MWCNT nanocomposites was obtained at lower MWCNT loading rather than direct incorporation of MWCNT into PC matrix. AC and DC electrical conductivity of miscible PC/PCL‐MWCNT nanocomposites were studied in a broad frequency range, 10¹?10⁶ Hz and resulted in low percolation threshold (p_c) of 0.14 wt%, and the critical exponent (t) of 2.09 from the scaling law equation. The plot of logσ_DC versus p^?1/3 showed linear variation and indicated the existence of tunneling conduction among MWCNTs. At low MWCNT loading, the influence of large polymeric gaps between conducting clusters is the reason for the frequency dependent electrical conductivity. Transmission electron microscopy and field emission scanning electron microscopy showed that MWCNTs were homogeneously dispersed and developed a continuous interconnected network path throughout the matrix phase and miscibility behavior of the polymer blend. POLYM. ENG. SCI., 54:646–659, 2014. © 2013 Society of Plastics Engineers     

Effects of amino‐functionalized carbon nanotubes on the properties of amine‐terminated butadiene–acrylonitrile rubber‐toughened epoxy resins

Amino‐functionalized multiwalled carbon nanotubes (MWCNT‐NH₂s) as nanofillers were incorporated into diglycidyl ether of bisphenol A (DGEBA) toughened with amine‐terminated butadiene–acrylonitrile (ATBN). The curing kinetics, glass‐transition temperature (T_g), thermal stability, mechanical properties, and morphology of DGEBA/ATBN/MWCNT‐NH₂ nanocomposites were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis, a universal test machine, and scanning electron microscopy. DSC dynamic kinetic studies showed that the addition of MWCNT‐NH₂s accelerated the curing reaction of the ATBN‐toughened epoxy resin. DSC results revealed that the T_g of the rubber‐toughened epoxy nanocomposites decreased nearly 10°C with 2 wt % MWCNT‐NH₂s. The thermogravimetric results show that the addition of MWCNT‐NH₂s enhanced the thermal stability of the ATBN‐toughened epoxy resin. The tensile strength, flexural strength, and flexural modulus of the DGEBA/ATBN/MWCNT‐NH₂ nanocomposites increased increasing MWCNT‐NH₂ contents, whereas the addition of the MWCNT‐NH₂s slightly decreased the elongation at break of the rubber‐toughened epoxy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40472.     

Sequential mixing as effective method in the reduction of percolation threshold of multiwall carbon nanotube in poly(methyl methacrylate)/high‐density poly(ethylene)/MWCNT nanocomposites

This work demonstrates sequential heating protocol to be an effective method in the reduction of percolation threshold of multiwall carbon nanotube (MWCNT) in (70/30 w/w) poly(methyl methacrylate) (PMMA)/high‐density poly(ethylene) (HDPE)/MWCNT nanocomposites. Here, the percolation threshold (P_c) value was reduced to 0.08 wt % of MWCNT, which is the lowest among the ever reported values of P_c for the PMMA system. Moreover, a co‐continuous morphology of the minor HDPE phase was evident throughout the major PMMA phase in a highly asymmetric composition (70/30 w/w) of the blend constituents. The AC conductivity as well as the dielectric permittivity values were increased with increase in loading of MWCNT in the nanocomposites. The detailed analysis of electrical and morphological properties is discussed in depth in the article. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40235.     

Enhancement of dispersion of carbon nanotube and physical properties of poly(styrene‐co‐acrylonitrile)/multiwalled carbon nanotube nanocomposite via surface initiated ATRP

Dispersion behavior of multiwalled carbon nanotube (MWCNT), rheological and mechanical properties of various MWCNT/poly(styrene‐co‐acrylonitrile) (SAN) nanocomposites were investigated. MWCNT/SAN nanocomposites were prepared by three different methods; MWCNT/SAN melt blending, MWCNT/SAN in situ atom transfer radical polymerization (ATRP) and functionalized‐MWCNT/SAN in situ ATRP. Formation of SAN onto the surface of MWCNT and the molecular weight of grafted‐SAN were confirmed by fourier transform infrared spectra, ¹H‐NMR and ¹³C‐NMR. Crossover frequency of storage and loss modulus from rheological measurement and dynamic mechanical analysis showed that functionalized MWCNT/SAN in situ ATRP nanocomposite showed more uniform dispersion of MWCNT. Improved mechanical and electrical properties were observed for functionalized MWCNT/SAN in situ ATRP nanocomposite. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of interfacially compatibilized PP‐EPDM thermoplastic vulcanizate/graphite nanocomposites: Effects of graphite microstructure upon morphology,electrical conductivity,and melt rheology

Electrically conductive PP/EPDM dynamically crosslinked thermoplastic vulcanizate (TPV)/expanded graphite (EG) has been successfully prepared via melt compounding of maleic anhydride grafted polypropylene (PP‐g‐MA)/EG masterbatch and a commercially available TPV material. Correlation between graphite microstructure, and electrical conductivity as well as melt rheological behavior has been studied. Natural graphite flake (NGF), graphite intercalated compound (GIC), and exfoliated graphite (EG) have been employed and compared. Scanning electron microscopy (SEM) showed the presence of 100–200 nm nanolayers in the structure of PP‐g/EG masterbatches, whereas thinner platelets (1.5–2.5 nm) were revealed by transmission electron microscopy (TEM). Better dispersion of the graphite nanolayers in the microstructure of TPV/PP‐g‐MA/EG composite was verified, as the 7.3 Å spacing between the aggregated graphite nanolayers could not be observed in the XRD pattern of this material. TPV/PP‐g/EG nanocomposites exhibited much lower conductivity percolation threshold (φ_c) with increased conductivity to 10^?5 S/cm at EG wt % of 10. Higher nonlinear and nonterminal melt rheological characteristics of dynamic elastic modulus (G′) at low frequency region was presented by the TPV/PP‐g/EG nanocomposites, indicating the formation of nanoscopic conducting multiple networks throughout the continuous TPV matrix. Maleated PP was found to be much more effective in separating EG nanolayers which is attributed to the higher interfacial interaction between PP‐g‐MAH and EG, synergized with its multiporous structure. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of cooling rate on the surface resistivity of polymer/multi‐walled carbon nanotube nanocomposites

In this study, ethylene‐vinyl acetate copolymer (EVA) and polystyrene (PS) were melt‐mixed with multi‐walled carbon nanotube (CNT) (MWCNT), respectively. The effect of mixing time, rotor speed, and cooling rate on surface resistivity was investigated. EVA/MWCNT and PS/MWCNT nanocomposites with percolation threshold <1 wt% of MWCNT were prepared using conventional melt‐compounding method. When fast cooling was applied for these nanocomposites, a surface resistivity of 10⁶ Ω/square was obtained at around 7 wt% of MWCNT for EVA and 10⁵ Ω/square at around 3.5 wt% of MWCNT for PS. However, when slow cooling was applied, a surface resistivity of 10⁶ Ω/square was obtained at 0.75 wt% of MWCNT for EVA and 10⁵ Ω/square at around 0.5 wt% of MWCNT for PS. To the best of our knowledge, this is the first report which recognizes the importance of cooling rate on the surface resistivity of polymer/MWCNT nanocomposites. This finding may be potential to the commercialization of the CNT‐based polymer nanocomposites. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Microwave‐assisted synthesis and characterization of polyimide/functionalized MWCNT nanocomposites containing quinolyl moiety

Polyimide‐MWCNT nanocomposites were prepared by the reaction of a heterocyclic diamine monomer of bis(4‐amino‐3,5‐dimethylphenyl)‐2‐chloro‐3‐quinolylmethane (BACQM), pyromellitic dianhydride (PMDA) with unmodified MWCNT (MWCNT), acid‐functionalized MWCNT (acid‐MWCNT) or amine‐functionalized MWCNT (amine‐MWCNT) using microwave irradiation as well as by the conventional method. The structure of the monomer was confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR spectral techniques. The glass transition temperature (T_g) of the MWCNTs/polyimide nanocomposite was found to be higher than that of the unfilled polyimide system. The T_g's of both systems were higher when prepared with the microwave method than the conventional synthesis. The T_g's of the nanocomposites using acid and amine functionalized MWCNTs are greater than 300°C, in both methods. This is attributed to the presence of hydrogen bond and strong covalent bond in both the acid‐MWCNT/polyimide and amine‐MWCNT/polyimide systems. The morphological studies of the nanocomposites synthesized using microwave irradiation show that a distinct MWCNT nanofibrillar network is formed in the matrix when MWCNT or acid‐MWCNT is used. A homogeneous morphology, without distinct nanotube domains is seen when the amine‐MWCNT is covalently linked to the polymer. POLYM. COMPOS., 37:2417–2424, 2016. © 2015 Society of Plastics Engineers     

The effect of multiwalled carbon nanotube dimensions on the morphology,mechanical, and electrical properties of melt mixed polypropylene‐based composites

The effect of multiwalled carbon nanotube (MWCNT) dimensions and surface modification on the morphology, mechanical reinforcement, and electrical properties of PP‐based composites, prepared by melt mixing, has been studied. The MWCNTs of small (d < 10 nm) and large (d = 40–60 nm) diameters with various intrinsic aspect ratios (L/d) have been used as filler. Transmission electron microscopy and very cold neutrons (VCN) scattering showed that both as‐received and surface modified small diameter MWCNT(1)s exhibit a strong tendency to bundle or cluster together in melt compared to both long MWCNT(3)s and short MWCNT(2)s large diameter nanotubes. The fractions of isolated nanotubes are higher and the mass‐fractal dimensions are lower for thick MWCNT‐based nanocomposites. The nanotubes of all types are heterogeneous nucleation sites for PP crystallization. The tensile and DMA testing results revealed that both long thick MWCNT(3)s with L/d ≈ 300 and thin MWCNT(1)s with highest intrinsic L/d > 1000 exhibit similar reinforcing effects, because drastically decreasing the effective aspect ratio (L/d)_eff of the thin flexibly nanotubes within polymer matrix. The nanocomposites based on the long large diameter MWCNT(3)s demonstrated the lowest percolation threshold equal to 1.5 vol % loading, highest dielectric and electromagnetic waves shielding properties. It was concluded that the choice of optimal diameter and length of MWCNTs is right approach to the improvement in the dispersion state and straightness of multiwelled carbon nanotubes in polymer melt as well as to enhancement of their efficiency as reinforcing and conductive nanosized filler. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Structure and electrical properties of grafted polypropylene/graphite nanocomposites prepared by solution intercalation

A novel process was developed to prepare electrically conducting maleic anhydride grafted polypropylene (gPP)/expanded graphite (EG) nanocomposites by solution intercalation. The conducting percolation threshold at room temperature (Φ_c) of the nanocomposites was 0.67 vol %, much lower than that of the conventional conducting composites prepared by melt mixing (Φ_c = 2.96 vol %). When the EG content was 3.90 vol %, the electrical conductivity (σ) of the former reached 2.49 × 10^?3 S/cm, whereas the σ of the latter was only 6.85 × 10^?9 S/cm. The TEM, SEM, and optical microscopy observations confirmed that the significant decrease of Φ_c and the striking increase of σ might be attributable to the formation of an EG/gPP conducting multiple network in the nanocomposites, involving the network composed of particles with a large surface‐to‐volume ratio and several hundred micrometers in size, and the networks composed of the boards or sheets of graphite with high width‐to‐thickness ratio and particles of fine microscale or nanoscale sizes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1864–1869, 2003     

Noncovalent compatibilization of polypropylene/MWCNT composites using an amino‐pyridine grafted polypropylene matrix

Polypropylene (PP)/multiwalled carbon nanotube (MWCNT) composites are prepared by implementing noncovalent compatibilization. The compatibilization method involves PP matrix functionalization with pyridine (Py) aromatic moieties, which are capable of π–π interaction with MWCNT sidewalls. Imaging revealed that the addition of 25 wt% of PP‐g‐Py to neat PP is capable of drastically reducing nanotube aggregate size and amount, compared to a matrix containing the equivalent amount of a maleated PP (PP‐g‐MA). Raman spectroscopy confirms improved polymer/nanotube interaction with the PP‐g‐Py matrix. The electrical percolation threshold appears at a MWCNT loading of approximately 1.2 wt%, and the maximum value of the electrical conductivity achieved is 10⁻² S/m, irrespective of the functionalization procedure. The modulus of the composites is improved with the addition of MWCNTs. Furthermore, composites functionalized with Py display significant improvements in composite ductility compared with their maleated counterparts because of the improved filler dispersion. POLYM. COMPOS., 37:2794–2802, 2016. © 2015 Society of Plastics Engineers     

Improved dielectric performance of polypropylene/multiwalled carbon nanotube nanocomposites by solid‐phase orientation

By means of a die‐drawing technique in the rubbery state, the effect of the orientation of the microstructure on the dielectric properties of polypropylene (PP)/multiwalled carbon nanotube (MWCNT) nanocomposites was examined in this study. The viscoelastic behavior of the PP/MWCNT nanocomposites with MWCNT weight loadings ranging from 0.25 to 5 wt % and the dielectric performance of the stretched PP/MWCNT nanocomposites at different drawing speeds and drawing ratios were studied to obtain insight into the influences of the dispersion and orientation state of the MWCNTs and matrix molecular chains. A viscosity decrease (ca. 30%) of the PP/MWCNT‐0.25 wt % (weight loading) melt was obviously due to the free volume effect. Differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction were adopted to detect the orientation structure and the variation of crystal morphology of the PP/MWCNTs. Melting plateau regions, which indicated the mixed crystallization morphology for the stretched samples, were found in the DSC patterns instead of a single‐peak for the unstretched samples. We found that the uniaxial stretching process broke the conductive MWCNT networks and consequently increased the orientation of MWCNTs and molecular chains along the tensile force direction; this led to an improvement in the dielectric performance. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42893.     

Interfacial agent effect on rheological response and crystallite characteristics in germicidal polypropylene/titanium dioxide nanocomposites

Germicidal nanocomposites based on metallocene isotactic polypropylene (iPP) and titanium dioxide (TiO₂) nanoparticles have been prepared at a constant TiO₂ content of 2 wt%. Different quantities of a polypropylene wax partially grafted with maleic anhydride (PP‐g‐MAH) are employed to improve the polymer‐nanoparticle compatibility. Remarkable biocidal capabilities of these TiO₂ nanocomposites have been found and their crystalline structure and thermal and rheological responses explored. Several very interesting features have been found in these germicidal nanocomposites. On the one hand, rheological parameters do not change significantly with respect to those exhibited by pure iPP. This is extremely advantageous for the processing of these compounds since they can be transformed under similar conditions to those employed for iPP. On the other hand, the existence of two polymorphs is observed independent of the amount of compatibilizer used. The enhancement in polymer‐nanoparticle interactions by effect of the interfacial (PP‐g‐MAH) component is appraised looking at dynamical mechanical relaxations as a function of temperature and at crystallization processes of the various nanocomposites. Copyright © 2012 Society of Chemical Industry     

Electrically conducting polypropylene/polyaniline‐grafted‐short glass fiber composites: Microstructure and dynamic mechanical analysis

The thermal properties of isotactic polypropylene (iPP) reinforced with polyaniline‐grafted‐short glass fibers (PAn‐g‐SGF) at 10, 20, and 30 wt% concentration and iPP blended with 5 wt% PP‐grafted‐maleic anhydride (PP‐gMA) and 30 wt% of PAn‐g‐SGF were investigated. iPP crystallizes into a spherulitic morphology, the microfiller promoted larger spherulite size and higher dynamic modulus, but the overall degree of crystallinity decreased as the concentration of PAn‐g‐SGF increased. The melting temperature, T_m, was not influenced by the microfiller. However, the crystallization temperature, T_c, as determined by DMA, first decreased reaching a minimum at ca. 20 wt%, and then increased, in contrast with T_c determined by DSC, it increased as concentration increased. The initial reduction in T_c observed by DMA seems to be associated with the crystallites growing from the microfiller into the matrix, the overall molecular dynamics then being less affected. On the other hand, increase in T_c above 20 wt% concentration suggests that the percolation threshold could be responsible for these results. Addition of the maleic anhydride copolymer produced higher shear modulus, transition temperatures, and activation energy, suggesting higher interaction between microfiller and polymer matrix. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Effect of syndiotactic polystyrene on the crystallization behavior of isotactic polypropylene/syndiotactic polystyrene blends with and without β‐nucleating agent

Blends of isotactic polypropylene (PP) and syndiotactic polystyrene (sPS) with and without β‐nucleating agent were prepared using a twin‐screw extruder at 290 °C. Blends of PP/sPS with β‐nucleating agent mainly show β crystalline form, irrespective of high (20 °C min^?1) or low (2 °C min^?1) previous cooling rates. This suggests that the cooling rates have little effect on the polymorphic composition of PP in PP/sPS blends. The effect of sPS on the crystallization of PP is compared with that of polyamide 6 (PA6). The increase in crystallization temperature of PP is smaller in the presence of sPS than in the presence of PA6; the fold surface free energy of PP/sPS is larger than that of PP/PA6 blends. These results reveal that compared with PA6, sPS has much weaker α‐nucleation effect on the crystallization of PP. The weak α‐nucleation effect of sPS is attributed to the high lattice mismatch between PP and sPS crystals.     

The physical and mechanical properties of beta‐nucleated polypropylene/montmorillonite nanocomposites

Polypropylene (PP) and polypropylene/polypropylene‐g‐maleic anhydride/ organomontmorillonite (PP/PP‐g‐MA/OMMT) nanocomposites were modified with 0.05 to 0.3% (w/w) of the aryl amide β‐nucleator to promote the formation of hexagonal crystal modification (β‐phase) during melt crystallization. The nonisothermal crystallization behavior of PP, PP/PP‐g‐MA/OMMT and β‐nucleated PP/PP‐g‐MA/OMMT nanocomposites were studied by means of differential scanning calorimetry. Structure‐property relationships of the PP nanocomposites prepared by melt compounding were mainly focused on the effect and quantity of the aryl amide nucleator. The morphological observations, obtained from scanning electron microscopy, transmission electron microscopy and X‐ray diffraction analyses are presented in conjunction with the thermal, rheological, and mechanical properties of these nanocomposites. Chemical interactions in the nanocomposites were observed by FT‐IR. It was found that the β‐crystal modification affected the thermal and mechanical properties of PP and PP/PP‐g‐MA/OMMT nanocomposites, while the PP/PP‐g‐MA/OMMT nanocomposites of the study gained both a higher impact strength (50%) and flexural modulus (30%) compared to that of the neat PP. β‐nucleation of the PP/PP‐g‐MA/OMMT nanocomposites provided a slight reduction in density and some 207% improvement in the very low tensile elongation at break at 92% beta nucleation. The crystallization peak temperature (T_cp) of the PP/PP‐g‐MA/OMMT nanocomposite was slightly higher (116°C) than the neat PP (113°C), whereas the β‐nucleation increased the crystallization temperature of the PP/PP‐g‐MA/OMMT/aryl amide to 128°C, which is of great advantage in a commercial‐scale mold processing of the nanocomposites with the resulting lower cycle times. The beta nucleation of PP nanocomposites can thus be optimized to obtain a better balance between thermal and mechanical properties. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Enhanced properties of phthalonitrile‐terminated polyarylene ether nitriles embedded with hybrid MWCNT–boehmite nanocomposites

The main motivation of the present work was to fabricate novel multifunctional polymer‐based nanocomposites. The nanocomposites embedded with multi‐walled carbon nanotube‐boehmite (MWCNT‐boehmite) were prepared via hot pressure casting technique. The MWCNT coated with boehmite were synthesized by hydrothermal synthesis. Subsequently, as‐prepared MWCNT‐boehmite was added into the phthalonitrile‐terminated polyarylene ether nitriles (PEN‐t‐CN) matrix in order to benefit from the synergetic effect of MWCNT and boehmite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) X‐ray diffraction (XRD), and Fourier transform infrared (FTIR) were employed to confirm the existence of MWCNT‐boehmite in our article. Furthermore, the structures, fracture morphologies, thermal, mechanical and dielectric properties of the nanocomposites were investigated, respectively. SEM images indicated that the MWCNT‐boehmite was homogeneously dispersed in the polymer, which acted as an essential factor to ensure good physical properties. The TGA analysis showed that the incorporation of MWCNT‐boehmite enhanced the thermal stability of the nanocomposites with initial degradation temperature (T_id) increasing from 458 to 492°C, while that of the pure PEN‐t‐CN was 439°C. The mechanical testing proved that significant enhancement of mechanical properties has been achieved. The tensile strength of PEN‐t‐CN/MWCNT‐boehmite composites with 3 wt% MWCNT‐boehmite reached the maximum (78.33 MPa), with a 41.7 % increase compared to the pure polymer. More importantly, the unique dielectric properties were systematically discussed and the results demonstrated that dielectric properties exhibited little dependency on frequency. For the incorporation of hybrid filler, the positive impact of MWCNT‐boehmite hybrid material resulted in polymer‐based nanocomposites with enhanced physical properties. POLYM. COMPOS., 36:2193–2202, 2015. © 2014 Society of Plastics Engineers     

Comparative study of gamma and ion beam irradiation of polymeric nanocomposite on electrical conductivity

Poly(vinyl alcohol) (PVA) was used to prepare nanocomposites of multi‐wall carbon nanotubes (MWCNT) and functionalized carbon nanotubes (MWCNT‐NH₂) in existence of 2‐carboxyethyl acrylate oligomers (CEA). Radiation‐induced crosslinking of the prepared matrix was carried out via gamma and ion beam irradiation. A comparative study of gamma and ion beam irradiation effect on the electrical conductivity of nanocomposite was conducted. The gelation of the gamma irradiated matrix outperforms the ion beam irradiated matrix. The order of gelation is PVA > (PVA/CEA) > (PVA/CEA)‐MWCNT > (PVA/CEA)‐MWCNT‐NH₂. There is a significant reduction in the swelling of the nanocomposite. The formation of nanocomposites was confirmed by scanning electron microscopy, energy‐dispersive X‐ray (EDX) and FTIR examinations. The direct current electrical properties of PVA/nanocomposites are examined at room temperature by applying electric voltage from 1 to 20 V. The results revealed that the electrical conductivity is increased by adding the carbon nanotubes and irradiation by gamma and ion beam. At an applied electric voltage 20 V, in the electrical conductivity of the unirradiated PVA was from 9.20 × 10^?8 S cm^?1. After adding MWCNT an increase up to 4.70 × 10^?5 S cm^?1 was observed. While after ion beam irradiation, a further increase up to 9.30 × 10^?5 S cm^?1 was noticed. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46146.     

Interfacial influence on mechanical properties of polypropylene/polypropylene‐grafted silica nanocomposites

Three types of polypropylene‐grafted silica (PGS‐2 K, PGS‐8 K and PGS‐30 K) with different grafting chain lengths were prepared. After melt‐blending PGS with polypropylene (PP), we studied the PP/PGS interface properties and the influence of PP/PGS interfaces on mechanical properties of nanocomposites. The strong matrix/particle interface was observed in PP/PGS‐30 K nanocomposites with 5 wt % particle loading as evidenced by 2.5 °C increased glass transition temperature (T_g) compared with neat PP, whereas the weak matrix/particle interface was observed in PP/PGS‐2 K nanocomposites with decreased T_g. The variations in the matrix/particle interfacial strength lead to a transition in the yield stress of nanocomposites. Compared with the unfilled PP, the yield stress of the PP/PGS‐2 K nanocomposites is decreased by 0.7 MPa, and the yield stress of the PP/PGS‐30 K nanocomposites is enhanced by 1.4 MPa. In addition, benefiting from good dispersion, the PP/PGS‐masterbatch nanocomposites with a strong matrix/particle interface not only exhibit increased Young's modulus and yield stress, but also the strain at break remains in line with the unfilled PP, which is in contrast to the conventional wisdom that the gain in modulus and strength must be at the expense of the decreased break strain. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45887.     

Synthesis of polypropylene graft copolymers from a hydroxyl‐groups‐containing polypropylene precursor via atom‐transfer radical polymerization

Isotactic polypropylene graft copolymers, isotactic[polypropylene‐graft‐poly(methyl methacrylate)] (i‐PP‐g‐PMMA) and isotactic[polypropylene‐graft‐polystyrene] (i‐PP‐g‐PS), were prepared by atom‐transfer radical polymerization (ATRP) using a 2‐bromopropionic ester macro‐initiator from functional polypropylene‐containing hydroxyl groups. This kind of functionalized propylene can be obtained by copolymerization of propylene and borane monomer using isospecific MgCl₂‐supported TiCl₄ as catalyst. Both the graft density and the molecular weights of i‐PP‐based graft copolymers were controlled by changing the hydroxyl group contents of functionalized polypropylene and the amount of monomer used in the grafting reaction. The effect of i‐PP‐g‐PS graft copolymer on PP‐PS blends and that of i‐PP‐g‐PMMA graft copolymer on PP‐PMMA blends were studied by scanning electron microscopy. Copyright © 2006 Society of Chemical Industry     

Light scattering characterization of poly(tetrafluoroethylene‐co‐perfluoromethyl vinyl ether) copolymer

Static and dynamic light scattering experiments were performed to characterize the copolymer of tetrafluoroethylene (TFE) and perfluoromethyl vinyl ether (PMVE). Solvents of perfluoro‐2‐butyltetrahydrofuran (FC‐75) and Flutec PP11 (PP11) were used to dissolve the TFE‐PMVE copolymer. By taking advantage of the solvent properties of FC‐75 and PP11, homogeneous TFE‐PMVE copolymer solutions were specially prepared in a FC‐75/PP11 mixed solvent. Such prepared solutions could provide a strong enough scattered intensity for light scattering studies. The molecular weight, molecular weight distribution, chain dimensions, and conformation were determined for the TFE‐PMVE copolymer in the FC‐75/PP11 mixed solvent. A combination of viscosity and molecular weight measurements enabled the calculation of the k value in the relation of η₀ = k (M_w)^3.4 and thus the prediction of the molecular weight of a given TFE‐PMVE copolymer with the same composition by using only the simpler and more readily available rheological measurements. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 733–739, 2000