La-doped SnO₂:synthesis and its electrochemical property

Tin dioxide(SnO2) and La-doped(1%,5%,10% in mass ratio) SnO2 samples were prepared via a hydrothermal method. The as-prepared powders were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM) . Results showed that the particle size of SnO2 decreased gradually with the increase of the doped La element. When used as anode materials of Li ion battery,the La-doped samples exhibited better cycling performance than the pure SnO2,and the cycling performance of the La-doped samples got better and better with the increase of the doped La. The better electrochemical performance of the doped material could be attributed to the doping of La element,which not only enabled SnO2 powders to have a good dispersivity but also reduced their particle size.     

La-doped SnO2 synthesis and its electrochemical property

Tin dioxide (SnO₂) and La-doped (1%, 5%, 10% in mass ratio) SnO₂ samples were prepared via a hydrothermal method. The as-prepared powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results showed that the particle size of SnO₂ decreased gradually with the increase of the doped La element. When used as anode materials of Li ion battery, the La-doped samples exhibited better cycling performance than the pure SnO₂, and the cycling performance of the La-doped samples got better and better with the increase of the doped La. The better electrochemical performance of the doped material could be attributed to the doping of La element, which not only enabled SnO₂ powders to have a good dispersivity but also reduced their particle size.     

Effects of lanthanum addition on corrosion resistance of hot-dipped galvalume coating

Effects of La addition on corrosion resistance of hot-dipped galvalume coating steel wire were investigated. The corrosion resistance of Zn-Al-Si-La alloy coatings containing 0, 0.02wt.%, 0.05wt.%, 0.1wt.% and 0.2wt.% La were evaluated by various tests such as copper-accelerated acetic acid salt spray testing (CASS), immersion test in 3.5% NaCl solution, electrochemical tests including weak polarization curves and electrochemical impedance spectroscopy (EIS) tests, scanning electron microscope (SEM) test and X-ray diffraction (XRD) test. It was found that the corrosion resistance of galvalume coating could be improved by adding proper amounts of La. Meanwhile, the mechanism of the improvement of corrosion resistance by La addition was discussed.     

Comparative Study on Thermodynamical and Electrochemical Behavior of Al（88）Ni6La6 and Al（86）Ni6La6Cu2 Amorphous Alloys

Two amorphous ribbons with the compositions of Al88Ni6La6 and Al86Ni6La6Cu2 were made using the melt-spun method,and their thermal response and electrochemical behavior were studied comparatively.Differential scanning calorimetry（DSC）and electrochemical polarization measurements indicated that Al86Ni6La6Cu2 exhibited slightly higher crystallization temperature（Tx）,lower melting point（Tl）and better corrosion resistance in 0.01 mol·L-1 NaCl alkaline solution.These results demonstrated that Cu（2%）addition could slightly promote the glass forming ability,but it could greatly improve the corrosion resistance of Al88Ni6La6 alloy in 0.01 mol·L-1 NaCl alkaline solution.     

Effects of SrO/Li2O/La2O3/Ta2O5/TiO2-coating on electrochemical performance of LiCoO2

Commercial cathode material (LiCoO2) was modified by coating with a thin layer of SrO/Li2O/La2O3/Ta2O5/TiO2 for improving its performance in lithium ion battery. The morphology and structure of the modified cathode material were characterized by scanning elec-tron microscopy (SEM) and X-ray diffraction (XRD). The performance including cycling stability, diffusion coefficient under different volt-age, C-rate discharge of the batteries with this modified cathode material was examined. The results showed that the battery with the coated cathode material could discharge at a large current density, and it possessed a stable cycle performance in the range from 3.0 V to 4.2 V. It was explained that the rate of Li ion diffusion increased in the batteries using SrO/Li2O/La2O3/Ta2O5/TiO2-coated LiCoO2 as the cathode and the coated layer could act as a fast ion conductor (Sr0.5La0.05Li0.35Ti0.5Ta0.5O3) and as a protecting shell to prevent LiCoO2 particles from be-ing attacked by the acidic electrolyte.     

锂离子电池正极材料Li0．99Re0．01FePO4的合成及性能

采用固相反应法合成了锂离子电池正极材料Li0．99Re0．01FePO4（Re=Er、Y、Gd、Nd、La）。采用X射线衍射、恒电流充放试验对试样的微观结构和电化学性能进行测试。试验结果表明：掺杂稀土金属离子对LiFePO4的晶体结构没有影响。试样Li0．99Gd0．01FePO4的电化学性能最佧,在C／10和1C倍率下放电容量均最大,分别为136．63mAh／g、121．74mAh／g。     

快淬纳米晶/非晶Mg2-xLaxNi (x=0～0.6)合金的贮氢动力学

为了改善Mg2Ni型合金气态及电化学贮氢动力学性能,用La部分替代合金中的Mg,用快淬技术制备了Mg2-xLaxNi(x=0,0.2,0.4,0.6)合金,用XRD,SEM,HRTEM分析了铸态及快淬态合金的微观结构;用自动控制的Sieverts设备测试了合金的气态贮氢动力学性能,用程控电池测试仪测试了合金的电化学贮氢动力学.结果发现,快淬无La合金具有典型的纳米晶结构,而快淬含La合金显示了以非晶相为主的结构,表明La替代Mg提高Mg2Ni型合金的非晶形成能力.La替代Mg明显地改变Mg2Ni型合金的相组成.当La替代量x=0.4时,合金的主相改变为(La,Mg) Ni3+ LaMg3.合金的气态及电化学吸放氢动力学对La含量及快淬工艺敏感,La替代使合金的吸氢动力学降低,但适量的La替代可以明显改善合金的放氢动力学及高倍率放电能力.适当的快淬处理可以提高合金的气态及电化学贮氢动力学,但获得最佳贮氢动力学的快淬工艺与合金的成分密切相关.     

Preparation and electrochemical properties of Y-doped Li3V2（PO4）3 cathode materials for lithium batteries

Y-doped Li3V2(PO4)3 cathode materials were prepared by a carbothermal reduction(CTR) process. The properties of the Y-doped Li3V2(PO4)3 were investigated by X-ray diffraction (XRD) and electrochemical measurements. XRD studies showed that the Y-doped Li3V2(PO4)3 had the same monoclinic structure as the undoped Li3V2(PO4)3. The Y-doped Li3V2(PO4)3 samples were investigated on the Li extraction/insertion performances through charge/discharge, cyclic voltammogram (CV), and electrochemical impedance spectra (EIS). The optimal doping content of Y was x=0.03 in Li3V2-xYx(PO4)3 system. The Y-doped Li3V2(PO4)3 samples showed a better cyclic ability. The electrode reaction reversibility was enhanced, and the charge transfer resistance was decreased through the Y-doping. The improved electrochemical performances of the Y-doped Li3V2(PO4)3 cathode materials were attributed to the addition of Y3+ ion by stabilizing the monoclinic structure.     

Electrochemical formation of Mg–La–Mn alloys by coreduction of Mg(II), La(III) and Mn(II) in LiCl+KCl molten salts

In the present work, cyclic voltammetry (CV), square wave voltammetry (SWV) and chronopotentiometry (CP) were used to investigate the electrochemical coreduction behaviors of La(III) and Mg(II) as well as La(III), Mg(II) and Mn(II) on Mo electrode in LiCl + KCl molten salts. CV and SWV results exhibit that the coreduction mechanism of La (III) and Mg(II) on Mo electrode is that La(III) is reduced and Mg–La intermetallic compound is formed, leading to the deposition potential of La(III) shifting to more positive one. The electrochemical signals pertaining to the formation of metallic La, Mg and Mn as well as Mg–La intermetallic compound are also observed by coreduction of La(III), Mg(II), and Mn(II) in LiCl + KCl molten salt on the inert Mo electrode. However, the electrochemical signals associated with the formation of La–Mn and Mg–Mn alloys are not observed, which means that the depolarization effect of La(III) and Mg(II) does not occur on pre-deposited Mn electrode. The Mg–La–Mn alloys were formed by co-deposition of La(III), Mg(II), and Mn(II) on Mo electrode at various concentration ratios of La(III) and Mg(II). The results of scanning electron microscopy equipped with energy dispersive spectroscopy and X-ray diffraction displays that the Mg–La–Mn alloys are comprised of La–Mg compound Mg₁₇La₂, Mg and Mn phases. The concentration ratio of La(III) and Mn(II) has few effects on the alloy composition.     

LaMg11Zr+200%Ni+x%La(x=O,5,10)储氢合金结构及电化学性能

采用机械合金化法(MA)制备了非晶态LaMg11Zr+200%(质量分数,下同)Ni+x%La(x=0,5,10)系列储氢合金,并详细研究了La添加对该系列合金的相结构及电化学性能的影响.结构分析表明,球磨20h该系列合金都呈非晶态,La添加后合金颗粒得到明显细化;电化学研究表明,La添加后,合金电极充电阻力减小,放电容量随La含量的增加而增大,适量v的添加一定程度上改善了合金电极的循环稳定性和动力学性能,LaMg11Zr+200%Ni+5%La合金电极达到最大放电容量597.2mAh·g-1,循环30次后的容量保持率仍为53.5%.     

Electrodeposition of Mg-Li-Al-La Alloys on Inert Cathode in Molten LiCl-KCl Eutectic Salt

Electrochemical preparation of Mg-Li-Al-La alloys on inert electrodes was investigated in LiCl-KCl melt at 853 K (580 °C). Cyclic voltammograms (CVs) and square wave voltammograms (SWVs) show that the existence of AlCl₃ or AlF₃ could promote La deposition on an active Al substrate, which is predeposited on inert electrodes. All electrochemical tests show that the reduction of La³⁺ is a one-step reduction process with three electrons exchanged. The reduction of La(III)→La(0) occurred at –2.04 V, and the underpotential deposition (UPD) of La was detected at –1.55 V (vs Ag/AgCl). The same phenomena concerning La UPD were observed on two inert cathodes, W and Mo. In addition, Mg-Li-Al-La alloys were obtained by galvanostatic electrolysis on the W cathode from La₂O₃ in LiCl-KCl-MgCl₂-KF melts with aluminum as the anode. X-ray diffraction (XRD) measurements indicated that various phases like the Al₂La, Al₁₂Mg₁₇, and βLi phase (LiMg/Li₃Mg₇) existed in the Mg-Li-Al-La alloys. The distribution of Mg, Al, and La in Mg–Li–Al-La alloys from the analysis of a scan electron micrograph (SEM) and energy dispersive spectrometry (EDS) indicated that the elements Mg, Al, and La distributed homogeneously in the alloys.     

Electrochemical Formation of Mg–Li–Sm Alloys by Codeposition from LiCl–KCl–MgCl2–SmCl3 Molten Salts

In this article, the electrochemical method of preparing Mg–Li–Sm alloys by codeposition in LiCl–KCl–MgCl₂–SmCl₃ melts was investigated. Transient electrochemical techniques, such as cyclic voltammetry, chronopotentiometry, and chronoamperometry were used to explore the electrochemical formation of Mg–Li–Sm alloys. Chronopotentiograms demonstrated that the codepositon of Mg, Li, and Sm occurred when current densities were more negative than −0.31 A cm⁻². Chronoamperograms indicated that the onset potential for the codeposition of Mg, Li, and Sm was −2.40 V, and the codeposition of Mg, Li, and Sm was formed when the applied potentials were more negative than −2.40 V. The different phases of Mg–Li–Sm alloys were prepared by galvanostatic electrolysis and characterized by X–ray diffraction (XRD), optical microscope (OM), and scanning electron microscopy (SEM). An inductively coupled plasma (ICP) analysis showed that the lithium and samarium contents in Mg–Li–Sm alloys could be controlled by the concentrations of MgCl₂ and SmCl₃. The results demonstrated that Sm could refine the grains dramatically. When the Sm content was 0.8 wt pct, the grain size was the finest.     

Influence of rare earth elements on corrosion behavior of Al-brass in marine water

The corrosion behaviors of Al-brass in stagnant and flowing marine water as a function of combinative rare earths (Ce and La) ad-dition were investigated by electrochemical techniques, X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was demon-strated that RE elements could make the corrosion product layer more protective and strengthen the cohesion between the film and matrix in stagnant seawater. The electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) anal...     

Effects of annealing on microstructures and electrochemical properties of La0.8Mg0.2Ni2.4Mn0.10Co0.55Al0.10 alloy

The La0.8Mg0.2Ni2.4Mn0.10Co0.55Al0.10 alloy was prepared by induction melting. The structural and morphological characterizations were performed by means of X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The electrochemical measurements were performed using LAND and CHI 660b electrochemical workstation. The main phases of the alloy were LaNi5 and (La,Mg)Ni3. After annealing, the maximum discharge capacity, cycle stability and high rate dischargeability (HRD) were improved obviously. The maximum discharge capacity reached 373.80 mAh/g (T=1173 K), the C100/Cmax(%) was 72.63% (T=1173 K), and the value of HRD reached 51.8% at a discharge current density of 1150 mA/g (T=1173 K). The cyclic voltammetry (CV) and potentiodynamic polarization were also studied.     

Electrochemical behaviour and codeposition of Al-Li-Er alloys in LiCl-KCl-AlCl3-Er2O3 melts

The electrochemical behaviour of Al, Li, and Er were investigated by electrochemical techniques, such as cyclic voltammograms, chronopotentiometric, chronoamperograms, and open circuit chronopotentiogram on molybdenum electrodes. The results showed that the underpotential deposition of erbium on pre-deposited Al electrodes formed two Al-Er intermetallic compounds. The codeposition of Al, Li, Er occurred and formed Al-Li-Er alloys in LiCl-KCl-AlCl3 -Er2O3 melts at 773K. Different phases such as Al2Er, Al2Er3 and βLi phase of Al-Li-Er alloys were prepared by galvanostatic electrolysis and characterized by X-ray diffraction (XRD). Scanning electron microscopy (SEM) indicated that Er element mainly distributed at the grain boundary. ICP analyses showed that lithium and erbium contents of Al-Li-Er alloys could be controlled by AlCl3 and Er2O3 concentration and electrochemical parameters.     

Effect of annealing temperature on microstructure and electrochemical performance of La0.75Mg0.25Ni3.5Co0.2 hydrogen storage electrode alloy

To improve the cyclic stability of La-Mg-Ni system alloy, as-cast La0.75Mg0.25Ni3.5Co0.2 alloy was annealed at 1123, 1223, and 1323 K for 10 h in 0.3 MPa argon. The microstructure and electrochemical performance of different annealed alloys were investigated systematically by X-Ray Diffraction （XRD）, Scanning Electron Microscopy （SEM）, X-Ray Photoelectron Spectroscopy （XPS）, and electrochemical experiments. The results obtained by XRD and SEM showed that the as-cast and annealed （1123 K） alloys had multiphase structure containing LaNis, （La, Mg）2（Ni, Co）7 and few LaNi2 phases. When annealing temperatures approached 1223 and 1323 K, LaNi2 phase disappeared. The annealed alloys at 1223 and 1323 K were composed of LaNi5, （La, Mg）2（Ni, Co）7 and （La, Mg）（Ni, Co）3 phases. With increasing annealing temperature, the maximum discharge capacity of the alloy decreased monotonously, but the cyclic stability was improved owing to structure homogeneity and grain growth after annealing, as well as the enhancement of anti-oxidation/corrosion ability and the suppression of pulverization during cycling in KOH electrolyte.     

Effects of Fe-substitution for cobalt on electrochemical properties of La-Mg-Ni-based alloys

In order to improve electrochemical properties,especially cycling stability,Co was partially substituted by Fe in A2B7-type La-Mg-Ni-based alloys.The La0.74Mg0.26Ni2.55Co0.65-xFex(x=0,0.10,0.20,0.30) alloys were prepared by inductive melting,and their phase structure and electrochemical properties were studied.The XRD and SEM results showed that the alloys consisted mainly of(La,Mg)2Ni7 phase,(La,Mg)5Ni19 phase and LaNi5 phase,except for absence of LaNi5 phase in the non-substituted alloy.The(La,Mg)5Ni19 ph...     

Co替代Ni对A2B7型贮氢电极合金相结构及电化学性能的影响

采用感应熔炼方法制备了La0.75Mg0.25Ni3.5-xCox(x=0,0.25,0.75,1)四元贮氢合金,系统地研究了合金B侧Co对Ni部分替代对合金相结构及电化学性能的影响.X衍射(XRD)分析表明,La0.75Mg0.25Ni3.5-xCox由(La,Mg)2Ni-7相(包括Gd2 Co7型高温相和Ce2 Ni7型低温相)组成.此外,随着Co元素的加入,该类合金中出现CaCu5型LaNi5相.电化学测试表明,随Co含量的增加,合金电极活化次数增大,合金电极的最大放电容量增大,合金的最大放电容量由x =0.25时的376.53 mAh/g增加到x=1时的401.62mAh/g,氢扩散系数增大,循环稳定性变差,合金的高倍率放电性能降低,Co含量对合金电极高倍率放电性能HRD值的影响与对合金电极交换电流密度的影响趋势一致,这表明电极合金表面的电化学反应对合金的动力学性能影响更大.     

An investigation of hydrogen storage kinetics of melt-spun nanocrystalline and amorphous MgeNi-type alloys

The nanocrystalline and amorphous Mg2Ni-type Mg2–xLaxNi (x=0,0.2) hydrogen storage alloys were synthesized by melt-spinning technique.The as-spun alloy ribbons were obtained.The microstructures of the as-spun ribbons were characterized by X-ray diffraction (XRD),high resolution transmission electronic microscopy (HRTEM) and electron diffraction (ED).The hydrogen absorption and desorption kinetics of the alloys were measured using an automatically controlled Sieverts apparatus,and their electrochemical kinetics were tested by an automatic galvanostatic system.The electrochemical impedance spectrums (EIS) were plotted by an electrochemical workstation (PARSTAT 2273).The hydrogen diffusion coefficients in the alloys were calculated by virtue of potential-step method.The obtained results showed that no amorphous phase was detected in the as-spun La-free alloy,but the as-spun alloys substituted by La held a major amorphous phase,con-firming that the substitution of La for Mg markedly intensified the glass forming ability of the Mg2Ni-type alloy.The substitution of La for Mg notably improved the electrochemical hydrogen storage kinetics of the Mg2Ni-type alloy.Furthermore,the hydrogen storage kinetics of the experimental alloys was evidently ameliorated with the spinning rate growing.     

A study on hydrogen storage and electrochemical properties of La_（0.55）Pr_（0.05）Nd_（0.15）Mg_（0.25）Ni_（3.5） （Co_（0.5）Al_（0.5））_x （x=0.0, 0.1, 0.3, 0.5） alloys

The La0.55Pr0.05Nd0.15Mg0.25Ni3.5(Co0.5Al0.5)x(x=0.0, 0.1, 0.3, 0.5) alloys were prepared by magnetic levitation melting under an Ar atmosphere, and the effects of Co and Al on the hydrogen storage and electrochemical properties were systematically investigated by pressure composition isotherms, cyclic voltammetry, Tafel polarization and electrochemical impedance spectroscopy testing. The results showed that the alloy phases were mainly consisted of (La,Pr)(Ni,Co)5, LaMg2Ni9, (La,Nd)2Ni7 and LaNi3 phases, and the cell volumes of (La,Pr)(Ni,Co)5, LaMg2Ni9, (La,Nd)2Ni7 and LaNi3 phases expanded with Co and Al element added. The hydrogen storage capacity initially increased from 1.36 (x=0) to 1.47 wt.% (x=0.3) and then decreased to 1.22 wt.% (x=0.5). The discharge capacity retention and cycle stability of the alloy electrodes were improved with the increase of Co and Al contents. The La0.55Pr0.05Nd0.15Mg0.25Ni3.5(Co0.5Al0.5)0.3 alloy electrode possessed better electrochemical kinetic characteristic.