Tethering of Cu(II) Schiff base metal complex on mesoporous material MCM-41: catalyst for Ullmann-type coupling reactions

The siloxane-functioned Cu(II) complex derived from 3-aminopropyltrimethoxysilane, terephthaldehyde and 2-aminophenol was anchored on hexagonal mesoporous silica MCM-41. The MCM-41 and its Schiff base MCM-41 complex was characterized by FTIR, small-angle X-ray diffraction, SEM-EDX, N₂ adsorption and desorption analysis and TGA. The synthesized Cu-Schiff base MCM-41 catalyst has been successfully applied as a catalyst for Ullmann-type coupling reaction of the aryl halides with aryl halides, phenols, amines and N-heterocyclic amines. In the coupling reaction the yields of the products were good and the catalyst was recovered by simple filtration method and can be reused.     

Oxovanadium (IV) Schiff base complex immobilized on CPS microspheres as heterogeneous catalyst for aerobic selective oxidation of ethyl benzene to acetophenone

In this work, chloromethylated crosslinked polystyrene microspheres (CMCPS microspheres) were used as starting carrier, and a new immobilized bidentate Schiff base oxovanadium (IV) complex catalyst was prepared. The chloromethyl groups of CMCPS microspheres were first transformed into aminomethyl groups via Delepine reaction with hexamethylene tetramine (HMTA) as reagent, obtaining aminomethylated (AM) microspheres AMCPS. And then the Schiff base reaction between the primary amino group of AMCPS microspheres and salicylaldehyde (SA) was allowed to be conducted, resulting in Schiff base-type resin microspheres, SAAM-CPS, on which bidentate Schiff base ligand SAAM were chemically anchored. Subsequently, the coordination reaction between the ligand SAAM of SAAM-CPS microspheres and vanadyl sulfate (VOSO₄) was carried out, obtaining a new immobilized bidentate Schiff base-type oxovanadium (IV) complex, CPS-[VO(SAAM)₂] microspheres, namely a new heterogeneous oxovanadium (IV) complex catalyst was prepared. On the basis of fully characterizing the microspheres CPS-[VO(SAAM)₂], they were used in the catalytic oxidation of ethyl benzene with molecular oxygen. The experimental results show that in the oxidation reaction of ethylbenzene with molecular oxygen as oxidant, the heterogeneous oxovanadium (IV) complex catalyst, CPS-[VO(SAAM)₂], has high catalytic activity and excellent catalytic selectivity. Under the mild conditions such as at ordinary pressure of dioxygen and at a relatively low temperature of 110 °C, ethyl benzene can be transformed to acetophenone as a single product with a yield of 43%. It was found that the reaction temperature and the used amount of the solid catalyst effect on the oxidation reaction greatly. The catalyst CPS-[VO(SAAM)₂] has excellent recycle and reuse property.     

Preparation and characterization of a titanium(IV) silsesquioxane epoxidation catalyst anchored into mesoporous MCM-41.

This paper describes the synthesis and spectroscopic study of a titanium(IV) silsesquioxane complex, which is heterogenised in the pores of an MCM-41 host material. Its immobilization is performed via chemical bonding, not by means of physical adsorption. As a linking molecule between the MCM-41 carrier and the silsesquioxane, (3-glycidyloxypropyl)trimethoxysilane is used. Characterization is performed by using nitrogen adsorption techniques, TGA, diffuse reflectance infrared spectroscopy (DRIFT) and ICP-MS. Also its catalytic activity towards the epoxidation of alkenes shows interesting results.     

Schiff base complex of Cu immobilized on MCM-41 as reusable catalyst for efficient oxidative coupling of thiols and oxidation of sulfides using hydrogen peroxide

Schiff base complex of copper-functionalized MCM-41 (Cu-complex@MCM-41) was synthesized and used as an efficient and novel heterogeneous catalyst for the oxidative coupling of thiols into corresponding disulfides and oxidation of sulfides to sulfoxides using hydrogen peroxide (H₂O₂) as the oxidant. An aliphatic and aromatic series of sulfides and thiols including various functional groups were successfully converted into corresponding products. The all products were obtained in good to excellent yields. The mesoporous catalyst is characterized by FT-IR spectroscopy, BET, XRD, SEM, EDS and TGA. Recovery of the catalyst is easily achieved by simple filtration and reused for several consecutive runs without significant loss of its catalytic efficiency.     

Synthesis,characterization and sulfide oxidation activity of vanadyl Schiff base complexes anchored on MCM-41

Vanadyl Schiff base complexes covalently attached on the surface of MCM-41 have been synthesized by anchoring Schiff base and subsequent reaction with VO(acac)₂. XRD, nitrogen adsorption and desorption, UV-visible spectroscopy and FT-IR show that vanadyl Schiff base complexes were successfully anchored on the surface of MCM-41 and the mesopore ordering decreased after the anchoring. The so-prepared heterogeneous catalysts have showed high activity for sulfide oxidation.     

Synthesis of tetradentate N4 Schiff base dioxomolybdenum (VI) complex within MCM-41 as selective catalyst for epoxidation of olefins

Covalent grafting of MCM-41 with 3-chloropropyl trimethoxysilane and subsequent reactions respectively with pypr [N,N′-bis(2-pyrrolmethylidenaminopropyl)amine] and complexation with MoO₂(acac)₂ afforded MoO₂pyprMCM-41. X-ray diffraction and nitrogen sorption analyses revealed the preservation of the textural properties of the support as well as accessibility of the channel system despite sequential reduction in surface area, pore volume and pore size. Elemental analyses showed nearly complete complexation of the supported ligands and the presence of 0.24 mmol molybdenum per gram of the catalyst. Epoxidation of cyclooctene, cyclohexene, 1-hexene and 1-octene in the presence of MoO₂pyprMCM-41 with tert-butyl hydroperoxide (TBHP) were carried out with 21–98% conversion under the mild reaction conditions.     

Oxovanadium(IV) Schiff base complexes derived from 2,2′-dimethylpropandiamine: A homogeneous catalyst for cyclooctene and styrene oxidation

Tetradentate Schiff base ligands, derived from aromatic aldehydes and aliphatic diamine (2,2′-dimethylpropandiamine), and their vanadyl complexes have been prepared and characterized. Catalytic potential of these complexes was tested for the oxidation of cyclooctene and styrene using tert-butylhydroperoxide (TBHP) as oxidant. The effects of molar ratio of oxidant to substrate, temperature and solvent have been studied. Excellent selectivity of epoxidation for cyclooctene and good selectivity for styrene were obtained. The mechanism of oxidation has also been discussed.     

Zr (IV)-ninhydrin supported MCM-41 and MCM-48 as novel nanoreactor catalysts for the oxidation of sulfides to sulfoxides and thiols to disulfides

Modification of MCM-41 and MCM-48 mesoporous materials with bonded aminosilane species, Schiff base preparation by ninhydrin and finally complexation with zirconium, has attracted much attention in order to design catalyst with advanced applications in the oxidation of sulfides to sulfoxides and thiols to disulfides in the presence of hydrogen peroxide. In all oxidation of sulfides to sulfoxids 0.4 mL H₂O₂ used as oxidant in the presence of Zr(IV)-ninhydrin supported MCM-41 (0.01 g) or Zr(IV)-ninhydrin supported MCM-48 (0.005 g) at room temperature and solvent-free condition. Also the best conditions for oxidation of thiols to disulfides with 0.4 mL H₂O₂ were 0.005 g Zr(IV)-ninhydrin supported MCM-41 or Zr(IV)-ninhydrin supported MCM-48 at room temperature and in ethanol. These catalysts are characterized by SEM, XRD, TGA, FT-IR, EDS, ICP and BET analysis. Also the Turn over frequency (TOF) and Turn over number (TON) of catalysts are calculated. Obtained results by these heterogeneous catalysts revealed several advantages including short reaction times, simple workup, easy isolation and reusability.     

Preparation of chiral oxovanadium (IV) Schiff base complex functionalized by ionic liquid for enantioselective oxidation of methyl aryl sulfides

Chiral oxovanadium (IV) Schiff base complex covalently grafted with ionic liquid (IL: 1-(3-aminopropyl)-3-methylimidazolium tetrafluoroborate) has been reported first time. The IL-functionalized complex was found to be an efficient catalyst in the enantioselective oxidation of methyl aryl sulfides to sulfoxides with hydrogen peroxide as an oxidant. Especially, the IL-functionalized complex could be recovered conveniently by simple precipitation with addition of hexane and reused at least six cycles without loss of activity and enantioselectivity.     

Diphosphino-functionalized MCM-41 anchored palladium(0) complex as an efficient catalyst for Heck arylation of conjugated alkenes with aryl halides

Diphosphino-functionalized MCM-41 anchored palladium(0) complex (denoted as MCM-41-2P-Pd(0)) was conveniently synthesized from commercially available and cheap γ-aminopropyltriethoxysilane via immobilization on MCM-41, followed by reacting with diphenylphosphinomethanol and palladium chloride and then the reduction with hydrazine hydrate. XRD and XPS spectroscopies were employed to characterize the title palladium complex. It was found that this complex is a highly active and stereoselective catalyst for Heck arylation of conjugated alkenes with aryl halides and can be reused many times without loss of activity.     

Applications of pore-expanded MCM-41 silica: 4. Synthesis of a highly active base catalyst

MCM-41 silica whose pores have been expanded by post-synthesis hydrothermal treatment in the presence of N,N-dimethyldecylamine exhibits a unique combination of large pores (up to 20 nm), pore volume (up to 3.5 cc/g) and surface area (>1000 m²/g). It was used to accommodate a large amount of amine groups (2.2 mmol/g); thus generating a highly active base catalyst for Knoevenagel condensation.     

Synthesis,X-ray structure and study of a mixed ligand iron(III) complex with tridentate Schiff base as a homogeneous catalyst in the efficient oxidation of sulfides

A mononuclear mixed ligand complex of iron, [Fe^III(N-OPh-sal)(acac)EtOH], where Hacac and N-HOPh-Hsal denote acetylacetone and N-hydroxyphenyl-salicylideneamine, respectively, has been synthesized and characterized by elemental analysis, spectral studies and X-ray crystallography. The catalytic system containing this complex and urea hydrogen peroxide as oxidizing agent was used to selectively oxidize a range of sulfides to the corresponding sulfoxides in good yields under mild conditions. The electronic spectra of the catalytic system were applied to explore reactivity and stability of the catalyst during sulfide oxidation reactions and to examine the nature of active species, as well.     

Immobilized iron Schiff base histidine complexes on Al-MCM-41 and zeolite Y as catalyst for oxidation of cycloalkanes

Iron complexes of N-salicylidene-l-histidine with or without bipyridine ligand immobilized on Al-MCM-41 and zeolite Y designated as Fe(sal-l-his)(bipy)complex/Al-MCM-41 or Fe(sal-l-his)complex/Al-MCM-41 and Fe(sal-l-his)(bpy)complex/Y or Fe(sal-l-his)complex/Y respectively, were prepared and characterized by X-ray powder diffraction (XRD), FT-IR, N₂ adsorption/desorption and chemical analysis techniques. Fe(sal-l-his)/Al-MCM-41 and Fe(sal-l-his)(bipy)complex/Al-MCM-41 were found to successfully catalyze the oxidation of cyclohexane, methyl cyclohexane, cyclooctane and adamantane with H₂O₂. The oxidation results and promising catalytic behavior of Fe(sal-l-his)(bipy)complex/Al-MCM-41 for oxidation of cyclooctane with 90 % conversion and excellent selectivity toward the formation of cyclooctanone will be discussed in this presentation.     

Preparation and catalytic properties of a new dioxomolybdenum(VI) complex covalently anchored to mesoporous MCM-48

Reaction of the solvent adduct MoO₂Cl₂(THF)₂ with the 1,4-diazabutadiene ligands RNC(Ph)C(Ph)NR [R = (CH₂)₂CH₃, (CH₂)₃Si(OMe)₃] leads to complexes of the type MoO₂Cl₂(LL) in good yields at room temperature within a few minutes. The complex bearing the trimethoxysilyl groups was immobilized in the ordered mesoporous silica MCM-48 by covalent bonding. Solid state MAS NMR spectroscopy (¹³C, ²⁹Si) confirms that the structural integrity of the complex was retained during immobilization, except for loss of methoxide groups due to the reaction with surface silanols. Powder X-ray diffraction (XRD) and N₂ adsorption studies of the derivatized material indicate that the textural properties of the support were preserved during the grafting experiment and that the channels remained accessible. The modified material is active and selective in the epoxidation of cyclooctene at 55 °C using tert-butyl hydroperoxide as the oxidant. Stability was checked by recycling the solid catalyst several times. Some activity is lost from the first to second runs, but thereafter stabilizes. The catalytic behavior of the heterogenized catalyst was also compared with that observed in homogeneous phase for the complex with R=(CH₂)₂CH₃.     

Bidentate salen Cu(II) complex functionalized on mesoporous MCM-41 as novel nano catalyst for the oxidative coupling of thiols into disulfides using urea hydrogen peroxide (UHP)

Functionalized Copper(II) complex into nano dimensional mesoreactor was successfully prepared. The Copper(II) complex with N–O donor Schiff base ligand was readily trapped into mesoporous silica MCM-41 through the post grafting method. N–O Chelating Schiff-base-MCM-41 has been derived from 5-bromo-salicylaldehyde and 3-aminopropyltriethoxysilane which was functionalized on MCM-41 via silicon alkoxide route. This compound was characterized by FT-IR, TGA, small angle X-ray diffraction patterns, ICP/MS analysis and N₂ sorption–desorption analysis. The catalytic property of Cu–salen–MCM-41 was considered for the preparation of disulfides using urea hydrogen peroxide as oxidant. The reaction progress is simple and proceeds under mild and heterogeneous conditions in acetonitrile at the ambient of temperature. The corresponding disulfides have been achieved with high purity and good to excellent yields; also, no over oxidation to sulfoxide or sulfone was observed in all cases. The catalyst can be recovered and reused several times without significant loss of stability and activity.     

Oxovanadium(IV) Schiff Base Complexes Encapsulated in Zeolite-Y as Catalysts for the Liquid-Phase Hydroxylation of Phenol

Liquid-phase hydroxylation of phenol with H₂O₂ to a mixture of catechol and hydroquinone in acetonitrile has been reported using oxovanadium(IV) Schiff base complexes encapsulated in zeolite-Y as catalysts. Reaction conditions have been optimized by considering the concentration of substrate and oxidant, amount of catalyst, volume of solvent and temperature. Under the optimized reaction conditions, [VO(sal-1,3-pn)]-Y (H₂sal-1,3-pn = N,N'-bis(salicylidene)propane-1,3-diamine) has shown the highest conversion of 34.3% after 6 h, [VO(salen)]-Y (H₂salen = N,N'-bis(salicylidene)ethane-1,2-diamine) and [VO(saldien)]-Y (H₂saldien = N,N'-bis(salicylidene)- diethylenetriamine) have comparable catalytic activity (33% conversion) while [VO(sal-1,2-pn)]-Y (H₂sal-1,2-pn = N,N'-bis(salicylidene)propane-1,2-diamine) has the poorest performance (10.6% conversion). All these catalysts are more selective (90%) toward catechol formation except [VO(sal-1,3-pn)]-Y, which only gives 68% selectivity.     

Functionalization of oxo-vanadium(IV) acetylacetonate over modified MCM-41: an efficient reusable catalyst for epoxidation reaction

A new hybrid heterogeneous catalytic system has been developed by post synthesis grafting method. 3-aminopropyltriethoxysilane (3-APTES) has been first anchored over mesoporous silica materials MCM-41. Upon reaction with oxo-vanadium(IV) acetylacetonate amine groups of 3-APTES afford vanadium(IV) active centers in the mesoporous matrix. The prepared hybrid material has been characterized by UV–vis, infrared (IR) spectroscopic analysis, small-angle X-ray diffraction and N₂ sorption studies and employed in epoxidation reactions as a catalyst. The catalyst showed excellent catalytic activity towards epoxidation reaction with various olefinic compounds using tert-BuOOH as oxidant under mild reaction condition. The effect of different solvents on epoxidation reaction has also been studied.