Experimental investigation of natural polysaccharide-based mixed matrix membrane modified with graphene oxide and Pd-nanoparticles for enhanced gas separation performance

In this work, we proposed a mixed matrix membrane prepared by using a glycerol modified guar gum (GGP) polymer matrix incorporated with graphene oxide (GO). The influence of varying GO concentration on the gas separation performance was investigated and 2 wt% was found to be the optimum concentration for high performance. The 2 wt% GO mixed matrix membranes were further modified with Pd nanoparticles. When GO, and Pd nanoparticles were mixed, CO₂ permeability increased by 49.94%, while the permeability of H₂ gas molecules decreased by 98.11%, respectively, compared to the pristine GGP membrane. The selectivity of CO₂/H₂ was obtained as 18.27. The glass transition temperature of the membrane increased from 85 to 95.2 °C, tensile strength and elongation of the break were significantly improved by 29.09% and 84.37% through the addition of Pd and GO into the membrane. The scanning electron microscopy revealed a dense top surface after GO nanosheets incorporation. Further, the thermogravimetric analysis proposes that the modified membrane is thermally stable than GGP. Henceforth, the study suggests GO incorporation and Pd nanoparticles modification of guar gum membrane is a promising gas separation membrane with potentially high selectivity for CO₂ gas.     

CO2-selective membranes for hydrogen purification and the effect of carbon monoxide (CO) on its gas separation performance

Industrial hydrogen production may prefer CO₂-selective membranes because high-pressure H₂ can therefore be produced without additional recompression. In this study, high performance CO₂-selective membranes are fabricated by modifying a polymer–silica hybrid matrix (PSHM) with a low molecular weight poly(ethylene glycol) dimethyl ether (PEGDME). The liquid state of PEGDME and its unique end groups eliminate the crystallization tendency of poly(ethylene glycol) (PEG). The methyl end groups in PEGDME hinder hydrogen bonding between the polymer chains and significantly enhance the gas diffusivity. In pure gas tests, the membrane containing 50 wt% additive shows CO₂ gas permeability and CO₂/H₂ selectivity of 1637 Barrers and 13 at 35 °C, respectively. In order to explore the effect of real industrial conditions, the gas separation performance of the newly developed membranes has been studied extensively using binary (CO₂/H₂) and ternary gas mixtures (CO₂/H₂/carbon monoxide (CO)). Compared to pure gas performance, the second component (H₂) in the binary mixed gas test reduces the CO₂ permeability. The presence of CO in the feed gas stream decreases both CO₂ and H₂ permeability as well as CO₂/H₂ selectivity as it reduces the concentration of CO₂ molecules in the polymer matrix. The mixed gas results affirm the promising applications of the newly developed membranes for H₂ purification.     

Developing cross-linked poly(ethylene oxide) membrane by the novel reaction system for H2 purification

In this study, a ‘green” method has been discovered by utilizing the amino functional poly(ethylene oxide) (PEO) and epoxy functional PEO with low molecular weights to synthesis cross-linked membranes for enhancing H₂ purification and CO₂ capture performance by retarding the crystallinity of semi-crystalline polymer of PEO. The cross-linking reaction can happen simply by mixing two materials without using any solvent. The reaction has been characterized by Fourier transform infrared-attenuated total reflectance (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), solid-state ¹³C nuclear magnetic resonance (NMR) and the gel content test. Furthermore, X-ray diffraction (XRD) and differential scanning calorimeter (DSC) confirm the amorphous structure of cross-linked PEO membranes, which should benefit the gas transport. The gas transport properties and the plasticizing phenomenon of CO₂ have been examined in detail. Interestingly, the investigation on CO₂ plasticization phenomenon reveals that the cross-linked PEO membrane should be plasticized immediately after the pressure load. The pressure dependence of CO₂ permeability in the pressure range from 0.25 atm to 30 atm can be separated into two stages based on the permeability increment although the CO₂ permeability continuously increases with the loading pressure. The gas transport results illustrate that CO₂ has much larger permeability than that of any tested gas (including H₂, N₂ and CH₄) attributing to the CO₂-philic characteristic of ethylene oxide (EO) groups in the cross-linked PEO membrane. The good permeability and selectivity make the developed PEO membrane promising for H₂ purification and CO₂ capture applications.     

Enhancing hydrogen gas separation performance of thin film composite membrane through facilely blended polyvinyl alcohol and PEBAX

Polymeric membranes offer economic separation processes but are less explored for H₂ separation application. This work aims to unveil the H₂ separation potential of polymeric membrane by developing PVA-based reverse selective composite membrane. CO₂-selective PEBAX was blended at different PVA:PEBAX ratio. The effect of PEBAX blending on membrane morphology, crystallinity and gas separation behavior was studied. Incorporation of PEBAX at <50 wt% resulted in composite with improved CO₂ permeability but selectivity loss. Blending of >60 wt% PEBAX enhanced both permeance and selectivity of the resulted composite as the host matrix was dominated by this PEO containing material thus greatly enhancing polymer chain mobility and promoting CO₂-solubility. The best composite which contains 60 wt% PEBAX exhibited CO₂ permeability of 20.0 Barrer and CO₂/H₂ selectivity of 7.6. This performance surpasses the Robeson's boundary and unleashes the potential of tailoring the properties of polymeric nanocomposite membrane for H₂ separation application through facile PVA/PEBAX blending.     

PVDF/ionic liquid polymer blends with superior separation performance for removing CO2 from hydrogen and flue gas

We have demonstrated, for the first time, a polymer blend comprising poly(vinylidene fluoride) (PVDF) and a room-temperature ionic liquid (RTIL) that shows a high CO₂ permeability of 1778 Barrer with CO₂/H₂ and CO₂/N₂ selectivity of 12.9 and 41.1, respectively. The low viscosity RTIL, 1-ethyl-3-methylimidazolium tetracyanoborate ([emim][B(CN)₄]) possesses a high CO₂ solubility, and plays a significant role in CO₂ separation, whereas PVDF provides the mechanical strength to the blend membranes. A series of PVDF/[emim][B(CN)₄] polymer blends with different compositions were tested for their gas separation performance involving H₂, N₂ and CO₂ in both pure gas and mixed gas conditions. Both optical observation and Maxwell predictions confirm the heterogeneous nature of the PVDF/[emim][B(CN)₄] system. However, compared to miscible ionic liquid based blends, where molecular level interactions may restrain chain flexibility and reduce gas permeability, heterogeneous PVDF/RTIL blend systems show far superior gas transport properties. Most of these blend membranes outperform most reported materials and their gas transport and separation capabilities fall within the attractive region bound by the “2008 Robeson Upper Limit” for CO₂/H₂ and CO₂/N₂ gas pairs, and are also very stable at trans-membrane pressure up to 5 atm. Therefore, they are potential materials for H₂ purification and CO₂ capture from hydrogen production and flue gas.     

Active block copolymer layer on carboxyl-functionalized PET film for hydrogen separation

To rationalize the energy requirements and environmental complications of the world, supply of pure hydrogen is the most promising as well best possible approach of such issues. Purified hydrogen gas is the necessity factor for the hydrogen-based economy. Hydrogen perm-selective membrane plays a crucial role for producing a large amount of hydrogen. Palladium is one of the best materials because of its excellent affinity to absorb hydrogen. In present work, our aim to improve selectivity as well permeability of the H₂ gas compare to N₂ and CO₂ gases of the block copolymer coated functionalized porous PET membrane. Porous polyethylene terephthalate (PET) membranes having pore size 0.2 μm, functionalized with a carboxyl group. The supramolecular assembly was prepared from PS (35500)-b- P4VP (4400) and 2-(4- Hydroxyphenylazo) benzoic acid (HABA) in 1, 4-dioxane. Chemically synthesized palladium nanoparticles were deposited on carboxylated block copolymer (BC) coated porous PET membrane. It is an appropriate way to use H₂ sensitive materials with block copolymer coated functionalized membranes to enhance the selectivity of H₂. It has been found that such membranes gain better permeability and selectivity towards H₂ as compared with N₂ and CO₂. Increment with the dipping time of these membranes in the palladium nanoparticle solution, permeability as well selectivity of H₂ over N₂, CO₂ increases as the more attachment of Palladium nanoparticles. A fine active layer of block copolymer on the carboxyl functionalized PET membrane play a crucial role for hydrogen based gas separation. The magnitude of the permeability of such membranes for different gases shows dependency on the pore size of the upper layer (BC coated) of the membrane in addition to the molecule size of the permeating gas. Block copolymer coating of the membranes established an effective responsibility for the selectivity of H₂ over CO₂ gas as well over N₂ gas.     

Effect of mesoporous silica modification on the structure of hybrid carbon membrane for hydrogen separation

An SBA-15/carbon molecular sieve (CMS) composite membrane, using polyetherimide as a precursor and mesoporous silica as filler, was fabricated for hydrogen separation. The effect of mesoporous SBA-15 on the gas transport properties of the composite membrane was evaluated. The permeability and selectivity coefficients of H₂, CO₂, O₂, N₂, and CH₄ were estimated for the pure CMS and SBA-15/CMS composite membranes at a feed pressure of 2-7 atm for 30 °C. The SBA-15/CMS composite membrane had a gas permeability higher than that of the pure CMS membrane, whereas its selectivity was the same. The permeability was found to be independent of pressure; this indicates that the gases are transported through the membrane by a molecular sieve mechanism. The membranes appeared to have a more microporous structure when the mesoporous silica SBA-15 was incorporated. These results concur with the hypothesis that SBA-15 improves gas diffusivity by increasing pore volume.     

Development of hydrogen selective microporous PVDF membrane

Hydrogen is a sustainable clean and green energy source used to eliminate the problem of greenhouse effect. In the present work, the feasibility of gas permeability in separation of H₂ from CO₂ and N₂ have been examined using polyvinylidene fluoride (PVDF) membranes synthesised in our laboratory by the phase inversion process. Effect of various non-solvent additives, such as lithium chloride (LiCl) and Tetraethoxysilane (TEOS) in the PVDF dope solution, have been studied. The resulted asymmetric flat sheet microporous hydrophobic membrane, shows higher hydrogen permeability and selectivity over other gases (CO₂ & N₂). It has been observed that the MT5 membrane has shown the highest selectivity for hydrogen in comparison to CO₂ and N₂. The highest value of selectivity was obtained as 4.8 and 3.7 in case of H₂/CO₂ and H₂/N₂ respectively. The permeability of membrane has been obtained in the range of 2.3–4.2 mega barrer. SEM analysis is used for the investigation of membrane surface morphology.     

High performance ZIF-8/PBI nano-composite membranes for high temperature hydrogen separation consisting of carbon monoxide and water vapor

Two types of advanced nano-composite materials have been formed by incorporating as-synthesized wet-state zeolitic imidazolate frameworks-8 (ZIF-8) nano-particles into a polybenzimidazole (PBI) polymer. The loadings of ZIF-8 particles in the two membranes (i.e., 30/70 (w/w) ZIF-8/PBI and 60/40 (w/w) ZIF-8/PBI) are 38.2 vol % and 63.6 vol %, respectively. Due to different ZIF-8 loadings, variations in particle dispersion, membrane morphology and gas separation properties are observed. Gas permeation results suggest that intercalation occurs when the ZIF-8 loading reaches 63.6 vol %. The incorporation of ZIF-8 particles significantly enhances both solubility and diffusion coefficients but the enhancement in diffusion coefficient is much greater. Mixed gas tests for H₂/CO₂ separation were conducted from 35 to 230 °C, and both membranes exhibit remarkably high H₂ permeability and H₂/CO₂ selectivity. The 30/70 (w/w) ZIF-8/PBI membrane has an H₂/CO₂ selectivity of 26.3 with an H₂ permeability of 470.5 Barrer, while the 60/40 (w/w) ZIF-8/PBI membrane has an H₂/CO₂ selectivity of 12.3 with an H₂ permeability of 2014.8 Barrer. Mixed gas data show that the presence of CO or water vapor impurity in the feed gas stream does not significantly influence the membrane performance at 230 °C. Thus, the newly developed H₂-selective membranes may have bright prospects for hydrogen purification and CO₂ capture in realistic industrial applications such as syngas processing, integrated gasification combined cycle (IGCC) power plant and hydrogen recovery.     

GNs/MOF-based mixed matrix membranes for gas separations

NU-1000 and graphene nanosheet (GNs) with different loadings have been used as fillers to prepare mixed matrix membranes (MMMs) with polyethersulfone (PES). The high performance of the MMMs has been successfully fabricated for the evaluation of gas separation at 1 bar and various temperatures (20, 40, 60 °C). The successful fabrication of the MMMs were confirmed by using SEM, FTIR, AFM, and XRD. The crystalline nature of GNs and NU-1000 in the MMMs are evidenced by XRD, which confirms the successful fabrication of the MMMs. In addition, the thermal stability of the MMMs was enhanced with the increase of the GNs. Separation performance of H₂ was superior to CO₂, N₂ and CH₄ separation on the MMMs which is a critical for producing energy. The best gas separation results in terms of both permeability and selectivity were obtained with 0.03% GNs and 10% NU-1000. PG3N membrane presented maximum H₂/CO₂, H₂/N₂ and H₂/CH₄ selectivity of 5, 4.2, 3.3 at 20 C, respectively. With an increase in temperature, the permeability increased, while the selectivity of all the MMMs decreased. The MMMs exhibited excellent gas separation capability, which offers unique opportunities for potential large-scale practical applications.     

In situ fabrication of cross-linked PEO/silica reverse-selective membranes for hydrogen purification

Targeting at hydrogen purification, cross-linked organic–inorganic reverse-selective membranes containing poly(ethylene oxide) (PEO) are fabricated in situ by using functional oligomers (O,O′-bis(2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol: Jeffamine^® ED-2003) with a high content of PEO and epoxy-functional silanes (3-glycidyloxypropyltrimethoxysilane: GOTMS). Changes in physicochemical properties due to varying silica content have been characterized; including a great decline in melting temperature; an improvement in glassy and degradation temperature, and the suppression of PEO crystallinity. The strong affinity between quadrupolar CO₂ and polar ethylene oxide (EO) groups enhances the CO₂/H₂ separation performance of hybrid membranes, which can be further tuned by controlling the organic/inorganic ratio. The organic–inorganic hybrid membrane with 90 wt% of ED-2003 demonstrates an appealing CO₂ permeability of 367 Barrer with an attractive CO₂/H₂ selectivity of 8.95 at 3.5 atm and 35 °C. The transport performance trend with composition variations is explained by analyzing the calculated solubility and diffusivity based on the solution-diffusion mechanism. Moreover, CO₂ permeability increases with applied pressure in pure gas tests because of CO₂ plasticization phenomena, which is beneficial for CO₂/H₂ separation. Attributing to CO₂ plasticization and CO₂ dominant sorption, the mixed gas test results of the membrane containing only 25 wt% ED-2003 show greatly improved CO₂/H₂ selectivity of 13.2 with CO₂ permeability of 148 Barrer at 35 °C compared to pure gas results. Interestingly, at a stipulated CO₂ pressure, the inherent tension in cross-linked networks maintains the CO₂ permeability stable with the time. The cross-linked organic–inorganic membranes with enhancements in mechanical and thermal properties are promising for industrial-scale hydrogen purification.     

Palladium nanoparticle binding in functionalized track etched PET membrane for hydrogen gas separation

In this work, track-etched poly (ethylene terephthalate) (PET) membranes having different pore sizes were functionalized by the carboxylic groups and the amino groups. Palladium (Pd) nanoparticles of average diameter 5 nm were synthesized chemically and deposited onto pore walls as well as on the surface of these pristine and functionalized membranes. Effect of Pd nanoparticles binding on these membranes were explored and aminated membrane were found to bind more Pd nanoparticles due to its affinity. The morphology of these composite membranes is characterized by Scanning Electron Microscope (SEM) for confirmation of Pd nanoparticle deposition on pore wall as well as on the surface. Gas permeability of functionalized and non-functionalized membranes for hydrogen and carbon dioxide has been examined. From the gas permeability data of hydrogen (H₂) and carbon dioxide (CO₂) gases, it was observed that these membranes have higher permeability for H₂ as compared with CO₂. Due to absorption of hydrogen by Pd nanoparticles selectivity of H₂ over CO₂ was found higher as compared to without Pd embedded membranes. Such type of membranes can be used to develop hydrogen selective nanofilters for purification/separation technology.     

High performance composite hollow fiber membranes for CO2/H2 and CO2/N2 separation

The search for a clean energy source as well as the reduction of CO₂ emissions to the atmosphere are important strategies to resolve the current energy shortage and global warming issues. We have demonstrated, for the first time, a Pebax/poly(dimethylsiloxane)/polyacrylonitrile (Pebax/PDMS/PAN) composite hollow fiber membrane not only can be used for flue gas treatment but also for hydrogen purification. The composite membranes display attractive gas separation performance with a CO₂ permeance of 481.5 GPU, CO₂/H₂ and CO₂/N₂ selectivity of 8.1 and 42.0, respectively. Minimizing the solution intrusion using the PDMS gutter layer is the key to achieving the high gas permeance while the interaction between poly(ethylene oxide) (PEO) and CO₂ accounts for the high selectivity. Effects of coating solution concentration and coating time on gas separation performance have been investigated and the results have been optimized. To the best of our knowledge, this is the first polymeric composite hollow fiber membrane for hydrogen purification. The attractive gas separation performance of the newly developed membranes may indicate good potential for industrial applications.     

New PEEK-WC and PLA membranes for H2 separation

The potentialities of PEEK-WC (thermally treated at 120 °C) and PLA polymers have been studied in the field of membrane technology applied to H₂ separation/purification. In particular, for low/medium temperature operation (80 °C), PEEK-WC membranes (66 μm thick) showed good results in terms of H₂/CH₄ separation, showing an ideal selectivity value higher than 40. Meanwhile, we observed interesting selectivity also for H₂/N₂ and H₂/CO₂ separation, reaching values of 24 and 20, respectively. As expected, for PEEK-WC thermally treated membranes, the H₂ permeating flux increased from 25 to 80 °C and by increasing the transmembrane pressure. Furthermore, H₂ permeability at 80 °C was around 20 barrer. Concerning PLA membranes (26 μm thick), it is worth of noting that this polymer was pioneeristically used in this work as membrane application, showing great results in terms of H₂/CO₂ separation. Indeed, we overcame the Robeson's upper-bound (2008), achieving an ideal selectivity H₂/CO₂ around 25 with an H₂ permeability of 25 barrer. Further advantage due to the utilization of PLA membranes was related to the temperature operations set at ambient conditions, constituting a valuable and cost-effective solution for H₂/CO₂ separation processes via polymeric membrane technology.     

Evaluation of two gas membrane modules for fermentative hydrogen separation

The ability of (dimethyl siloxane) (PDMS) and SAPO 34 membrane modules to separate a H₂/CO₂ gas mixture was investigated in a continuous permeation system in order to decide if they were suitable to be coupled to a biological hydrogen production process. Permeation studies were carried out at relatively low feed pressures ranging from 110 to 180 kPa. The separation ability of SAPO 34 membrane module appeared to be overestimated since the effect concentration polarization phenomena was not taken into consideration in the permeation parameter estimation. On the other hand, the PDMS membrane was the most suitable to separate the binary gas mixture. This membrane reached a maximum CO₂/H₂ separation selectivity of 6.1 at 120 kPa of feed pressure. The pressure dependence of CO₂ and H₂ permeability was not considerable and only an apparent slight decrease was observed for CO₂ and H₂. The mean values of permeability coefficients for CO₂ and H₂ were 3285 ± 160 and 569 ± 65 Barrer, respectively. The operational feed pressure found to be more adequate to operate initially the PDMS membrane module coupled to the fermentation system was 180 kPa, at 296 K. In these conditions it was possible to achieve an acceptable CO₂/H₂ separation selectivity of 5.8 and a sufficient recovery of the CO₂ in the permeate stream.     

An integrated system development including PEM fuel cell/biogas purification during acidogenic biohydrogen production from dairy wastewater

Biohydrogen production from dairy wastewater with subsequent biogas purification by hollow fiber membrane module was investigated in this study. The purified and not purified (raw) biohydrogen were used as fuel in polymer electrolyte membrane (PEM) fuel cell. Furthermore, the effect of CO₂ on the performance of PEM fuel cell was evaluated considering cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and polarization curves. The maximum H₂ production rate was 0.015 mmol H₂/mol glucose and the biohydrogen concentration in biogas was ranged 33%–60% (v/v). CO₂/H₂ selectivity decreased with increasing pressure and maximum selectivity was obtained as 4.4 at feed pressure of 1.5 bar. The electrochemical active surface (EASA) areas were decreased with increasing CO₂ ratio. The maximum power densities were 0.2, 0.08 and 0.045 W cm⁻² for 100%, 80% and 60% (v/v) H₂, respectively. The results indicated that integrated PEM fuel cell/biogas purification system can be used as a potential clean energy sources during acidogenic biohydrogen production from dairy wastewater.     

H2 permeation and its influence on gases through a SAPO-34 zeolite membrane

This work analysed the permeation of binary and ternary H₂-containing mixtures through a SAPO-34 membrane, aiming at investigating how hydrogen influences and its permeation is influenced by the presence of the other gaseous species, such as CO₂ and CH₄. We considered the behaviour of various gas mixtures in terms of permeability and selectivity at various temperatures (25–300 °C), feed pressures (400–1000 kPa) and compositions by means of an already validated mass transport model, which is based on surface and gas translation diffusion. We found that the presence of CO₂ and CH₄ in the H₂-containing mixtures influences in a similar way the H₂ permeation, reducing its permeability of about 80% compared to the single-gas value because of their stronger adsorption. On the other hand, H₂ promotes the permeation of CO₂ and CH₄, causing an increment of their permeability with respect to those as single gases. These combined effects reflected in interesting selectivity values in binary mixture (e.g., CO₂/H₂ about 11 at 25 °C, H₂/CH₄ about 9 at 180 °C), which showed the potential of SAPO-34 membranes in treating of H₂-containing mixtures.     

Experimental evaluation of graphene oxide/TiO2-alumina nanocomposite membranes performance for hydrogen separation

In recent years, graphene oxide membranes showed interesting performances in terms of high permeating flux and perm-selectivity in several applications of gas separation because of their inherent properties combined to a low energy consumption. In this paper, a graphene oxide layer is coated on modified TiO₂-alumina tubular substrate in order to prepare graphene oxide nanocomposite membranes useful for hydrogen separation. Nanocomposite graphene oxide membrane samples were obtained by using vacuum deep coating method, depositing the graphene oxide solution as single layers on TiO₂-alumina substrate. Temperature and pressure variations were evaluated to achieve high H₂ permeance, high H₂/CO₂ selectivity and membrane performance stability during the experimental tests. Furthermore, it was found that the temperature increase causes a perm-selectivity (H₂/N₂ and H₂/CO₂) decrease, while the transmembrane pressure increase involves a general improvement of the perm-selectivity.     

A novel strategy for surface modification of polyimide membranes by vapor-phase ethylenediamine (EDA) for hydrogen purification

In this study, vapor-phase ethylenediamine (EDA) is utilized to specifically modify the physicochemical properties of the outer surface of polyimide membranes without modifying the internal membrane structure for hydrogen purification. The surfaces of polyimide membranes before and after EDA-vapor modification have been characterized by Fourier transform infrared-attenuated total reflectance (FTIR-ATR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD), which confirmed the modification mechanism including the conversion of imide groups into amide groups with simultaneous cross-linking between polymer chains and a physical decrement in d-space. Based on pure gas permeation tests, only a 10-min vapor-phase EDA treatment can significantly improve H₂/CO₂ selectivity (up to ∼100). This is attributed to intensive surface modification by EDA vapor, hence rendering this simple and yet novel technique more effectively for hydrogen purification than the conventional solution approach. Although the H₂/CO₂ separation performance in mixed gas tests is not as superior as that in pure gas permeation tests, mixed gas results affirmed impressive H₂/CO₂ separation performance of vapor-phase EDA modified polyimide membranes. This novel vapor modification strategy appears to be promising for large-scale processes, especially the modification of hollow fiber membranes for industrial hydrogen purification.     

Hydrogen separation and purification with poly (4-methyl-1-pentyne)/MIL 53 mixed matrix membrane based on reverse selectivity

The effect of MIL 53 (Al) metal organic framework on gas transport properties of poly (4-methyl-1-pentyne) (PMP) was determined based on reverse selectivity. Mixed matrix membranes (MMMs) were fabricated considering various weight percent of MIL 53 particles. The reverse MMMs permselectivities were evaluated through measurement of pure CO₂ and H₂ permeation together with calculation of CO₂/H₂ selectivity. The PMP/MIL 53 (Al) MMMs exhibited privileged CO₂/H₂ permselectivity in comparison with the neat PMP. In addition, CO₂ solubility coefficient was significantly increased with increasing the MIL 53 loading, while the H₂ solubility coefficient was almost remained unchanged. Moreover with increasing the feed pressure the permeability of CO₂ and CO₂/H₂ selectivity were dramatically enhanced, especially at higher filler loadings. Therefore, it was observed that the reverse selectivity of MMMs was enhanced so that the Robeson upper bound was overcome. The best yielding membranes (PMP/30 wt.% MIL 53) represented the CO₂ permeability and CO₂/H₂ selectivity of 377.24 barrer and 24.91 for pure gas experiments respectively.