Hydrogen production from cylindrical methanol steam reforming microreactor with porous Cu-Al fiber sintered felt

In this study, the porous Cu-Al fiber sintered felt (PCAFSF) was fabricated by low temperature solid-phase sintering method. The laminated PCAFSF as the catalyst support was used for cylindrical methanol steam reforming microreactor for hydrogen production. The two-layer impregnation method was employed to coat the Cu/Zn/Al/Zr catalyst on the PCAFSF. The material composition, specific surface area and catalyst loading of PCAFSF were also measured. The effect of the fiber material, surface morphology and porosity on the reaction performance of methanol steam reforming microreactor for hydrogen production was further investigated. Our results show that the PCAFSF demonstrated much higher methanol conversion and H₂ flow rate compared to the porous Cu fiber sintered felt (PCFSF) and porous Al fiber sintered felt (PAFSF) having the same porosity. Furthermore, the rough PCAFSF showed much higher methanol conversion and H₂ flow rate compared to the smooth PCAFSF. In case of the PCAFSF, the methanol conversion and H₂ flow rate were increased with the decrease of Cu fiber weight and the increase of Al fiber weight. The best reaction performance of microreactor for hydrogen production was obtained using the three layer PCAFSFs with 80% porosity and 1.12 g Cu fiber/1.02 g Al fiber.     

Numerical study of flow distribution uniformity for the optimization of gradient porosity configuration of porous copper fiber sintered felt for hydrogen production through methanol steam reforming micro-reactor

A macroscopic numerical method is proposed to study the flow distribution uniformity of a novel porous copper fiber sintered felt (PCFSF), which has gradient porosities and was developed as the methanol steam reforming micro-reactor catalyst support for hydrogen production for fuel cell applications. The macroscopic porous media developed by the ANSYS/FLUENT software is used to represent the PCFSF. Our results indicate that the gradient porosity can reshape the flow distribution of PCFSFs greatly, thus producing significant influence on their performance. It is further revealed that, for a PCFSF with a determined gradient porosity configuration but different reactant feed directions, the velocity uniformity can be used as a quantitative criterion to evaluate the performance of hydrogen production. Furthermore, new gradient PCFSFs are produced according to the flow distribution of original gradient PCFSFs. The preliminary experimental results of the new gradient PCFSFs of 0.8-0.9-0.7 and 0.7-0.9-0.8 exhibit better methanol conversion and H₂ flow rate. This indicates that the numerical method can be used for the optimization of PCFSFs' gradient porosity configuration, which consists of the shape and position of the interfaces between different porosity portions, the number of interfaces and the porosity distribution in different portions.     

Structural design of self-thermal methanol steam reforming microreactor with porous combustion reaction support for hydrogen production

To replace the traditional electric heating mode and increase methanol steam reforming reaction performance in hydrogen production, methanol catalytic combustion was proposed as heat-supply mode for methanol steam reforming microreactor. In this study, the methanol catalytic combustion microreactor and self-thermal methanol steam reforming microreactor for hydrogen production were developed. Furthermore, the catalytic combustion reaction supports with different structures were designed. It was found that the developed self-thermal methanol steam reforming microreactor had better reaction performance. Compared with A-type, the △T_max of C-type porous reaction support was decreased by 24.4 °C under 1.3 mL/min methanol injection rate. Moreover, methanol conversion and H₂ flow rate of the self-thermal methanol steam reforming microreactor with C-type porous reaction support were increased by 15.2% under 10 mL/h methanol-water mixture injection rate and 340 °C self-thermal temperature. Meanwhile, the CO selectivity was decreased by 4.1%. This work provides a new structural design of the self-thermal methanol steam reforming microreactor for hydrogen production for the fuel cell.     

A performance study of methanol steam reforming microreactor with porous copper fiber sintered felt as catalyst support for fuel cells

A porous copper fiber sintered felt (PCFSF) as catalyst support is used to construct a methanol steam reforming microreactor for hydrogen production. The PCFSF has been produced by solid-state sintering of copper fibers which is fabricated using the cutting method. The impregnation method is employed to coat Cu/Zn/Al/Zr catalyst on the PCFSF. In this study, the effect of the porosity and manufacturing parameters for the PCFSF on the performance of methanol steam reforming microreactor is studied by varying the gas hourly space velocity (GHSV) and reaction temperature. When the 80% porosity PCFSF sintered at 800 °C in the reduction atmosphere is used as catalyst support, it is found that the microreactor shows remarkable superiority in the methanol conversion and H₂ flow rate in comparison to the ones fabricated under other manufacturing parameters. Moreover, the microreactor with this catalyst-coated PCFSF also demonstrates the excellent stability of catalytic reaction in the methanol steam reforming process.     

Porous copper fiber sintered felts with surface microchannels for methanol steam reforming microreactor for hydrogen production

In this study, a laser micro-milling technique was introduced into the fabrication process of surface microchannels with different geometries and dimensions on the porous copper fiber sintered felts (PCFSFs). The PCFSFs with surface microchannels as catalyst supports were then used to construct a new type of laminated methanol steam reforming microreactor for hydrogen production. The microstructure morphology, pressure drop, velocity and permeability of PCFSF with surface microchannels were studied. The effect of surface microchannel shape (rectangular, stepped, and polyline) and catalyst loading amount on the reaction performance of methanol steam reforming microreactor for hydrogen production was further investigated. Our results show that the PCFSF with rectangular microchannels demonstrated a lower pressure drop, higher average velocity and higher permeability compared to the stepped and polyline microchannel. Furthermore, the PCFSF with rectangular microchannels also exhibited the highest methanol conversion and H₂ flow rate. The best reaction performance of methanol steam reforming microreactor for hydrogen production was obtained using PCFSF with rectangular microchannels when 0.5 g catalyst was loaded.     

Research on the hydrogen production performance of methanol reforming microchannels with multi-scale structures

Methanol microreactors are of much application value in mobile hydrogen production (HP) thanks to their tiny volume, flexibility and safety and all that. Microchannels, the core of a reactor, provide a site and heat supply for the reaction. In this paper, a microchannel with multi-scale structures, i.e. submicro structure, corrugated structure, fin structure and matrix structure, is designed. Then the influence mechanism of these structures on the hydrogen production of methanol reforming is studied. Specifically, the influences of microstructures like submicro and corrugated structures on the performance of the catalyst in the microchannel as well as the influence of fin structure and matrix structure on the heat and mass transfer performance of the channel are studied. From the experimental research on the methanol conversion rate and H₂ flow rate of the microchannel with multi-scale structures, the influence rule of different structures on the HP performance of the channel is summarized. The experimental results show that these multi-scale structures not only improve the loading of the catalyst of the microchannel, but also its heat and mass transfer, which increases the methanol conversion rate of the microchannel with multi-scale structures by 33% and its H₂ flow rate by 0.266 mol/h.     

Numerical analysis of performance enhancement and non-isothermal reactant transport of a cylindrical methanol reformer wrapped with a porous sheath under steam reforming

This paper accomplished a three-dimensional computational analysis of the methanol reformer with steam reforming by the Arrhenius form of reaction model and SIMPLE-C algorithm. The performance enhancement and non-isothermal reactant transport of the cylindrical reformer wrapped with a porous sheath were investigated. The parameters, including temperature of internal heater (T_H), porosity (ε), and thickness of porous sheath (R_P), on methanol conversion, hydrogen, carbon monoxide, carbon dioxide productions, temperature and velocity fields with the same inlet conditions have been investigated. The results present that higher methanol conversion and richer hydrogen production occur as temperature of heater, porosity, and porous sheath thickness increase. As temperature of internal heater is equal to 250 °C, employing a porous sheath with ε = 0.9 and R_P = 10 mm to wrap a reformer results in the maximum enhancements of 35.71% in methanol conversion and 21.18% in hydrogen production. Besides, a porous sheath with ε = 0.5 and R_P = 10 mm leads to the maximum reduction of 2.23% in carbon monoxide produced from the reformer at T_H = 300 °C.     

Design and test of a miniature hydrogen production reactor integrated with heat supply,fuel vaporization,methanol-steam reforming and carbon monoxide removal unit

This study presents a designed and tested integrated miniature tubular quartz-made reactor for hydrogen (H₂) production. This reactor is composed of two concentric tubes with an overall length of 60 mm and a diameter of 17 mm. The inner tube was designed as the combustor using Pt/Al₂O₃ as the catalyst. The gap between the inner and outer tubes is divided into three sections: a liquid methanol-water vaporizer, a methanol-steam reformer using RP-60 as the catalyst and a carbon monoxide (CO) methanator using Ru/Al₂O₃ as the catalyst. The experimental measurements indicated that this integrated reactor works properly as designed. The methanol conversion, hydrogen production rate and CO concentration were found to increase with an increasing methanol/air flow rate in the combustor and decreases with an increasing methanol/water feed rate to the reformer. The methanator experimental results indicated that the CO conversion and H₂ consumption can be enhanced by increasing the Ru loading. It was also found that the CO methanation depends greatly on the reaction temperature. With a higher reaction temperature, the CO methanation, carbon dioxide (CO₂) methanation, and reversed water gas shift reactions took place simultaneously. CO conversion was found to decrease while H₂ consumption was found to increase. At a lower reaction temperature both the CO conversion and H₂ consumption were found to increase indicating that only CO methanation took place. From the experimental results the maximum methanol conversion, hydrogen yield, and CO conversion achieved were 97%, 2.38, and 70%, respectively. The actual lowest CO concentration and maximum power density based on the reactor volume were 90 ppm and 0.8 kW/L, respectively.     

Fabrication of high aspect ratio ceramic micro-channel in diamond wire sawing as catalyst support used in micro-reactor for hydrogen production

Ceramic is an ideal material for preparing micro-channel catalyst supports with their characteristics of high temperature resistance, corrosion resistance and mechanical strength. High aspect ratio micro-channel structure has the advantages of large specific surface area, strong mass and heat transfer performance and high material utilization. However, ceramic materials are hard and brittle, and it is difficult to fabricate micro-channel structures with aspect ratio more than 1.5:1 by traditional processing methods. In this paper, a cutting method of large diameter diamond wire sawing was proposed. The micro-channels with width of 520 μm and aspect ratio of more than 4:1 was successfully fabricated by this method. Furthermore, the integrity of the micro-channel structure processed by diamond wire sawing was analyzed. And than the effect of surface morphology in different processing parameters on the catalyst loading performance were studied. The catalyst loading strength of ceramic slices with different surface morphology was tested. Finally, the ceramic micro-channel array was used as the catalyst support in micro-reactor for hydrogen production via methanol steam reforming (MSR). The methanol conversion rate and H₂ production rate could reach 87.8% and 74.6 mmol/h, respectively under GHSV 12600 ml/g·h at 300 °C. The experimental results show that the large-diameter diamond wire sawing technology can be used to process ceramic microchannels with high aspect ratio; using ceramic microchannel arrays as catalyst supports in hydrogen production can obtain better reaction performance; the feasibility of ceramic materials were broadened as microchannel catalyst supports.     

Design and performance evaluation of flexible tubular microreactor for methanol steam reforming reaction

To obtain the flexible microreactor for potential application in constrained space, a novel flexible tubular microreactor was designed by using a corrugated shell and a high porosity porous copper fiber rod (PCFR) as catalyst support. The effect of placement position, bending direction, and bending angle on reaction performance of flexible tubular microreactor was investigated. Then, the stability of flexible tubular microreactor was further evaluated. The experimental results showed that the placement position and bending direction had a significant influence on the reaction performance of flexible tubular microreactor. Methanol conversion of flexible tubular microreactor with the vertical placement was 6.67% higher than that with horizontal placement. Higher methanol conversion and H₂ flow rate were obtained when the microreactor bent along the vertical direction. The reaction performance of flexible tubular microreactor was found to decrease as the bending angle increased, and the methanol conversion decreased by around 14.07% with a bend of 90°. When the flexible tubular microreactor was horizontal placed with a bend of 60° in the vertical direction, the reaction performance of microreactor was not changed little after 20 cyclic bending. After continuous bending for 10 h, the methanol conversion and H₂ flow rate of flexible tubular microreactor were 70.58% and 0.88 mol/h, showing good reaction performance.     

Methanol steam reforming microreactor with novel 3D-Printed porous stainless steel support as catalyst support

In order to study the methanol steam reforming performance of the 3D-printed porous support for hydrogen production, three dimensional (3D) printing technology was proposed to fabricate porous stainless steel supports with body-centered cubic structure (BCCS) and face-centered cubic structure (FCCS). Catalyst loading strength of the 3D-printed porous stainless steel supports was studied. Moreover, methanol steam reforming performance of different 3D-printed porous supports for hydrogen production was experimentally investigated by changing reaction parameters. The results show that the 3D-printed porous stainless steel supports with BCCS and FCCS exhibit better catalyst loading strength, and can be used in the microreactor for methanol steam reforming for hydrogen production. Compared with 90 pores per inch (PPI) Fe-based foam support, 3D-printed porous stainless steel supports with FCCS and BCCS show the similar methanol steam reforming performance for hydrogen production in the condition of 6500 mL/(g·h) gas hourly space velocity (GHSV) with 360 °C reaction temperature. This work provides a new idea for the structural design and fabrication of the porous support for methanol steam reforming microreactor for hydrogen production.     

A columnar regular-porous stainless steel reaction support with high superficial area for hydrogen production

To improve hydrogen production (HP) performance of regular-porous structure (RPS), a columnar RPS with small specific surface area and high superficial area is developed. A numerical simulation model of regular-porous stainless steel structure (RPSSS) is established. Subsequently, heat transfer performance, pressure loss, temperature, methanol concentration, H₂ concentration distributions and HP performance of the columnar RPSSS with small specific surface area and high superficial area and the body-centered cubic RPSSS with high specific surface area and small superficial area are compared. Then, temperature, methanol concentration, H₂ concentration distributions and HP performance of axial and longitudinal size-enlarged columnar RPSSSs are studied. The results show that compared to the body-centered cubic RPSSS, the columnar RPSSS has higher methanol conversion, larger H₂ flow rate and higher CO selectivity. Especially in the condition of 300 °C wall temperature and 12 mL/h methanol-water mixture injection rate (MWMIR), the methanol conversion, H₂ flow rate and CO selectivity of the columnar RPSSS are increased by 12.3%, 9.24% and 30%, respectively, indicating that the superficial area of RPSSS is more important for its HP performance compared to its specific surface area. Compared to the longitudinal size-enlarged columnar RPSSS, the axial size-enlarged columnar RPSSS has higher methanol conversion, larger H₂ flow rate and higher CO selectivity. This research work provides a new method for the optimization of hydrogen production reaction support (HPRS).     

Numerical modeling of microchannel reactors with gradient porous surfaces for hydrogen production based on fractal geometry

A microchannel reactor with a porous surface catalyst support has been applied to methanol steam reforming (MSR) for hydrogen production. The fluid flow, heat transfer, and hydrogen production efficiency of the microchannel reactor are significantly affected by the fabricated porous surface support, such as the pore sizes and their distributions. This paper presents a novel microchannel reactor with a gradient porous surface as the reaction substrate to enhance the performance of the microreactor for hydrogen production. Numerical modeling of the gradient porous surface is developed based on fractal geometry, and three different types of porous surfaces as the catalyst supports (two gradient porous surfaces and one uniform pore-size surface) are investigated. The fluid flow and heat transfer characteristics of these three types of microchannel reactors are studied numerically, and the results showed that the microreactor with a positive gradient pore sized surface exhibited relatively better overall performance. Experimental setups and tests were performed and the results validate that the microchannel reactor with a positive gradient porous surface can increase the heat transfer performance by up to 18% and can decrease the pressure drop by up to 8% when compared to a microreactor with a uniform pore sized surface. Hydrogen production experiments demonstrated that the microreactor with positive gradient pore sizes has the highest methanol conversion rate of 56.3%, and this rate is determined to be 6% and 9% higher than that of microreactors with reverse gradient porous surfaces and uniform pore sized surface, respectively.     

Preparing a novel gradient porous metal fiber sintered felt with better manufacturability for hydrogen production via methanol steam reforming

The porous copper fiber sintered felts with gradient porosity structure (gradient PCFSFs) as catalyst supports is beneficial for heat and mass transfer for methanol steam reforming (MSR). However, the previously developed gradient PCFSF based on the velocity distribution introduces curved interface between different porosity portions, making the mold pressing method for its preparation more sensitive to tiny process changes. To improve its manufacturability, a novel gradient PCFSF with planar interface (PCFSF-SLR) is proposed in this paper by fabrication with multi-step mold pressing and solid phase sintering method using cutting copper fibers. Furthermore, MSR experiments under different gas hourly space velocities and reaction temperatures are conducted to verify the characteristics of PCFSF-SLR loaded with Cu/Zn/Al/Zr catalyst. The results have shown that the reaction characteristics of the PCFSF-SLR were similar to those with curved interfaces, and PCFSF-SLRs with a middle portion porosity of 0.9 have better hydrogen production performance and lower carbon monoxide concentration. More importantly, the results indicated that the methanol conversion and hydrogen flow rate of the gradient PCFSF with planar interface and porosity of 0.7-0.9-0.8 were close or even almost the same with that of the best gradient PCFSFs with curved interface and porosities of 0.7-0.9-0.8 and 0.8-0.9-0.7. Therefore, the proposed PCFSF-SLR provides a superior alternative to gradient PCFSFs with better manufacturability.     

Hydrogen production using integrated methanol‐steam reforming reactor with various reformer designs for PEM fuel cells

A 95 mm × 40 mm × 15 mm compact reactor for hydrogen production from methanol‐steam reforming (MSR) is constructed by integrating a vaporizer, reformer, and combustor into a single unit. CuO/ZnO/Al₂O₃ is used as the catalyst for the MSR while the required heat is provided using Platinum (Pt) ‐catalytic methanol combustion. The reactor performance is measured using three reformer designs: patterned micro‐channel; inserted catalyst layer placed in a single plain channel; and catalyst coated directly on the bottom wall of single plain channel. Because of longer reactant residence time and more effective heat transfer, slightly higher methanol conversion can be obtained from the reformer with patterned microchannels. The experimental results show that there is no significant reactor performance difference in methanol conversion, hydrogen (H₂) production rate, and carbon monoxide (CO) composition among these three reformer designs. These results indicated that the flow and heat transfer may not play important roles in compact size reactors. The reformer design with inserted catalyst layer provides convenience in replacing the aged catalyst, which may be attractive in practical applications compared with the conventional packed bed and wall‐coated reformers. Copyright © 2011 John Wiley & Sons, Ltd.     

Development of methanol steam reforming microreactor based on stacked wave sheets and copper foam for hydrogen production

Methanol steam reforming has been used for in-situ hydrogen production and supply for proton exchange membrane fuel cell (PEMFC), while its power density and energy efficiency still needs to be improved. Herein, we present a novel methanol steam reforming microreactor based on the stacked wave sheets and copper foam for highly efficient hydrogen production. The structural of stacked wave sheets and copper foam, and their roles in the microreactor are described, methanol catalytic combustion is adopted to supply heat for methanol steam reforming reaction and enables the microreactor to work automatically. For catalyst carrier, a fractal body-centered cubic model is established to study the flow characteristics and chemical reaction performances of the copper foam with coated catalyst layer. Both simulation and experimental results showed that the reformate flowrate increases with the increasing of microreactor layers and methanol solution flowrate, the discrepancies of methanol conversion between simulation and experimental tests are less than 7%. Experimental results demonstrated that the reformate flowrate of 1.0 SLM can be achieved with methanol conversion rate of 65%, the output power of the microreactor is 159 W and power density is 395 W/L. The results obtained in this study indicates that stacked wave sheets and copper foam can uniform the reactant flow and improve the hydrogen production performances.     

Reforming of methanol with steam in a micro-reactor with Cu–SiO2 porous catalyst

In the present work, we report the results of a series of experiments for the hydrogen production via steam reforming of methanol with Cu–SiO₂ porous catalyst coated on the internal walls of a micro-reactor with parallel micro-passages. The catalyst was prepared by coating copper and silica nanoparticles on the internal surface of the microchannel via convective flow boiling heat transfer, followed by a calcination procedure at 973 K and therefore, the catalyst does not require any supportive material, which in turn reduced the complexity and cost of the preparation. The experiments were conducted at reactant flow rates of 0.1–0.9 lit/min, operating temperatures of 523–673 K, catalyst loading of 0.25 gr to 1.25 gr and at heat flux value of 500 kW/m². Results of the experiments showed that the methanol conversion can reach 97% at catalyst loading of 1.25 gr. It was also found that with an increase in the gas hourly space velocity (GHSV) of the reactants, the methanol conversion decreases, which was attributed to the decrease in the residence time, the suppression in diffusion of reactants into the pores of the catalyst, and also the decrease in the average film temperature of the reactor. The highest methanol conversion was obtained at gas hourly space velocity of 24,000 ml/(gr.hr) and T = 773 K and for molar ratio of methanol to water of 0.1. The molar ratio of methanol to water also influenced the thermal response of the reactor such that the surface temperature profile of the micro-reactor was more decreased at low methanol/water molar ratios.     

Hydrogen production through methanol steam reforming: Effect of synthesis parameters on Ni–Cu/CaO–SiO2 catalysts activity

The objectives of this study were to prepare Ni–Cu/CaO–SiO₂ catalysts by a modified polyol process with different preparation conditions and evaluate the feasibility of hydrogen production from methanol steam reforming. CaO–SiO₂ materials possess high specific surface areas and CO₂ absorption capacities which were synthesized through the sol–gel method to serve as supports. The experimental results of the methanol steam reforming indicated that the highest catalytic activity was achieved when the Ni–Cu/CaO–SiO₂ catalyst was prepared under Ar atmosphere at a reduction temperature of 160 °C (160-Ar). The 160-Ar catalyst synthesized by this method has a large pore volume and a high mesoporosity. These physical properties contribute to the effective dispersion of metal particles in the 160-Ar catalyst. Increasing the MeOH/H₂O ratio was found to promote the water–gas shift reaction and direct methanol decomposition to produce more H₂.     

Thermal analysis of a micro tubular reactor for methanol steam reforming by optimizing the multilayer arrangement of catalyst bed for the catalytic combustion of methanolr

Packed bed tube reactors are commonly used for hydrogen production in proton exchange membrane fuel cells. However, the hydrogen production capacity of methanol steam reforming (MSR) is greatly limited by the poor heat transfer of packed catalyst bed. The hydrogen production capacity of catalyst bed can be effectively improved by optimizing the temperature distribution of reactor. In this study, four types of reactors including concentric circle methanol steam reforming reactor (MSRC), continuous catalytic combustion methanol steam reforming reactor (MSRR), hierarchical catalytic combustion methanol steam reforming reactor (MSRP) and segmented catalytic combustion reactor with fins (MSRF) are designed, modeled, compared and validated by experimental data. It was found that the maximum temperature difference of MSRC, MSRR, MSRP and MSRF reached 72.4 K, 58.6 K, 19.8 K and 11.3 K, respectively. In addition, the surface temperature inhomogeneity U_f and CO concentration of the MSRF decreased by 69.8% and 30.7%, compared with MSRC. At the same reactor volume, MSRF can achieve higher methanol conversion rate, and its effective energy absorption rate is 4.6%, 3.9% and 2.6% higher than that of MSRC, MSRR and MSRP, respectively. The MSRF could effectively avoid the influence of uneven temperature distribution on MSR compared with the other designs. In order to further improve the performance of MSRF, the influences of methanol vapor molar ratio, inlet temperature, flow rate, catalyst particle size and catalyst bed porosity on MSR were also discussed in the optimal reactor structure (MSRF).     

Production of hydrogen by partial oxidation with thermal plasma

The purpose of this paper is to investigate the characteristics and optimum operating conditions of the plasmatron-assisted CH₄ reforming reaction for the hydrogen-rich gas production. In order to increase the hydrogen production and the methane conversion rate, parametric screening study was conducted at various CH₄ flow ratio and steam flow ratio and with and without adding catalyst in the reactor. High-temperature plasma flame was made with air and arc discharge, and the air flow rate and the input power were set to 5.1  L/min and 6.4 kW, respectively.When the steam flow ratio was 30.2%, the hydrogen production was maximized and the optimal methane conversion rate was 99.7%. Under these optimal conditions, the following syngas concentrations were determined: H₂, 50.4%; CO, 5.7%; CO₂, 13.8%; and C₂H₂, 1.1%. H₂/CO ratio was 9.7 and the hydrogen yield was 93.7%.