Evaluating organic waste sources (spent coffee ground) as metal-free catalyst for hydrogen generation by the methanolysis of sodium borohydride

In this study, organic waste sources (spent coffee ground (SCG)) is used as metal-free catalyst in comparison with conventional noble-metal catalyst materials for hydrogen generation based on the methanolysis of sodium borohydride solution. Spent coffee ground (SCG) is used as a metal-free catalyst for the first time as treated with different chemicals. The aim is to synthesize the metal-free catalyst that can be used for the production of hydrogen, a renewable energy source. SCG, which was collected from coffee shops, was used for preparing the catalyst. To produce hydrogen by sodium borohydride (NaBH₄) methanolysis, SCG is pretreated with different chemical agents (H₃PO₄, KOH, ZnCl₂). According to the acid performances, the choice of phosphoric acid was evaluated at different mixing ratios (10%, 20%, 30%, 40%, 50%, 100%) (w/w), different temperatures (200, 300 and 400 °C) and burning times (30, 45, 60 and 90 min) for the optimization of SCG-catalyst. A detailed characterization of the samples were carried out with the aid of FTIR, SEM, XRD and BET analysis. In this study, the experiments were generally carried out effectively under ambient temperature conditions in10 ml methanol solution containing 0.025 g NaBH₄ and 0.1 g of the catalyst. The hydrogen obtained in the experimental studies was determined volumetrically by the gas measurement system. When evaluating the hydrogen volume, different NaBH₄ concentrations, catalyst amount and different temperature effects were investigated. The effect of the amount of NaBH₄ was investigated with 1%, 2.5%, 5%, and 7.5% ratio of NaBH₄ while the influence of the concentration of catalyst was carried-out at 0.05, 0.1, 0.15, and 0.25 g catalysts. Four different temperatures were tested (20, 30, 40, 50 and 60 °C) to explore the performance of the catalyst under different temperatures. The experiments by using SCG-catalyst treated with H₃PO₄ reveal that the best acid ratio was 100% H₃PO₄. The maximum hydrogen production rate with the use of SCG-catalyst for the methanolysis of NaBH₄ was found to be 8335.5 mL min⁻¹gcat⁻¹. Also, the activation energy was determined to be 9.81 kJ mol⁻¹. Moreover, it was discovered that there was no decline in the percentage of converted catalyst material.     

PDMA cryogel beads as a catalyst for hydrogen generation from NaBH4 alcoholysis

Poly[2-(dimethylamino)ethyl methacrylate] cryogel beads were prepared under cryogenic conditions via free radical polymerization and used as a catalyst in the production hydrogen (H₂) from NaBH₄ by alcoholysis. The efficiency of the catalyst was investigated in the range of 0–40 °C by both methanolysis and ethylene glycolysis reactions, and its reuse was tested. Accordingly, it was observed that the methanolysis reaction was faster than the ethylene glycolysis reaction. When the hydrogen generation rate (HGR) values between 0 and 40 °C were compared, it was concluded that the methanolysis reaction rate increased from 1550 to 4800 mL.min⁻¹g⁻¹ and the ethylene glycolysis reaction rate increased from 923 to 3551 mL.min⁻¹g⁻¹. In the alcoholysis reaction catalyzed by PDMA cryogel beads, the activation energy was calculated as 19.34 and 22.77 kJ.mol⁻¹ for the methanolysis and ethylene glycolysis reactions, respectively. After six repetitions, the catalyst activity was calculated over 50% for NaBH₄ methanolysis and ethylene glycolysis.     

Insight into the role of solvents in enhancing hydrogen production: Ru-Co nanoparticles catalyzed sodium borohydride dehydrogenation

Ru-Co nanoparticles prepared in nano-size by combustion derived of citric acid used sol-gel technique followed by calcination process at 450 °C. The external and internal properties of nano-sized catalyst were characterized by XRD, XPS, SEM, TEM, ICP-OES, and N₂ sorption techniques. The characterization results proved that nano-sized catalyst was mixture of cubic Co₃O₄ (18 nm) and tetragonal RuO₂ (40 nm) crystals with mesoporous structure (12.64 m²g^-1). Insight into the role of solvents for enhancing hydrogen production from Ru-Co nanoparticles catalyzed sodium borohydride (NaBH₄, SBH) was systematically studied by altering the dehydrogenation medium with water or methanol. The reaction kinetic performance of nano-sized catalyst was evaluated by performing both hydrogen generation reactions at various reaction temperatures, initial SBH concentration, and catalyst dosage to evaluate the hydrogen generation activity. Ru-Co nanoparticles exhibited exclusive catalytic performance for hydrogen generation by hydrolysis and methanolysis of SBH. The apparent activation energies (E_a) for the catalytic hydrolysis and methanolysis of SBH over Ru-Co nanoparticles were determined to be 20.02 kJ mol⁻¹ and 54.38 kJ mol⁻¹, respectively. Furthermore, Ru-Co nanoparticles also performed satisfied stability for both hydrolysis and methanolysis reactions. Beside both hydrogen generation was achived with fully conversion of SBH, Ru-Co nanoparticles promised good recyclability for at least 5 cycle for methanolysis of SBH.     

Synthesis of novel biocatalyst from organic waste protonated with acid treatment for hydrogen production

In this research study, orange peel-based biocatalysts developed from different acid protonation were used as a metal-free catalyst for hydrogen production from sodium borohydride (NaBH₄). In order to prepare the orange peel-based biocatalyst with higher catalytic activity, experiments were conducted with pure orange peel, different acid molar concentrations, and calcination temperatures. The physical morphology, surface texture, and chemical interaction were thoroughly analyzed by XRD, FTIR Raman, FESEM, BET, and TGA. As a result of the experiment, it was determined that the highly acid-treated biocatalyst (40% H₃PO₄, 40% H₂SO₄, 40% HCl) and calcinated at 450 °C for 1 h had higher catalytic activity. As a result, bio-hydrogen production at 35 °C and 70 °C methanolysis with 3% NaBH₄ catalyzed by a mixture of acid-treated catalysts were found as 46,213 and 63,842 ml min⁻¹g.cat⁻¹, respectively. However, with the increase of molar concentration of biocatalyst with 40% individual acid prolonged samples, the HGR rates will not have a satisfactory value in comparison with the 40% mixture of the acid-treated catalyst due to less number of active sites.     

Poly(2-aminoethyl methacrylate) based microgels catalyst system to be used in hydrolysis and methanolysis of NaBH4 for H2 generation

The poly(2-aminoethyl methacrylate) (p(AEM)) microgels were synthesized by microemulsion polymerization technique and used for in situ metal nanoparticle preparation to render as p(AEM)-M (M: Co or Ni) microgel composites and were used in p(AEM) based poly ionic liquid (PIL) microgels. Next, these p(AEM)) based microgel materials were used as catalysts for hydrogen (H₂) production from both hydrolysis and methanolysis reactions of sodium borohydride (NaBH₄). It was found that the catalytic hydrolysis of the NaBH₄ reaction, catalyzed by p(AEM)-Co microgel composite was completed in 140 min, whereas the methanolysis of NaBH₄ methanolysis catalyzed by the PIL of p(AEM)⁺Cl⁻ microgels was completed in 5 min both with 250 ± 2 mL H₂ production. Furthermore, p(AEM)-Co microgel composite catalysts maintained 80% catalytic activity after 5 consecutive uses in NaBH₄ hydrolysis. On the other hand, p(AEM)⁺Cl⁻ microgels were found to afford more than 50% catalytic activity even after 20 repetitive use in NaBH₄ methanolysis due to superior regeneration ability. Moreover, activation energy values for p(AEM)-Co microgel composites catalyzed NaBH₄ hydrolysis reaction were calculated as 38.9 kJ/mol in comparison to 37.3 kJ/mol activation energy of p(AEM)⁺Cl⁻ microgel catalyzed methanolysis reaction.     

Highly efficient Co-B catalysts with Chlorella Vulgaris microalgal strain modified using hydrochloric acid as a new support material for hydrogen production from methanolysis of sodium borohydride

In this study, we report for the first time the use of C. Vulgaris microalgal strain containing cellulose in the modified form to be used as a catalyst support material for the production of hydrogen from the methanolysis reaction of sodium borohydride (NaBH₄). Acetic acid, phosphoric acid, and hydrochloric acid (HCl) at different concentrations and impregnation times were used for the protonation of cellulose in the microalgal strain. The cobalt ions were added to this modified support material and, C.Vulgaris microalgal strain-supported Co-B catalyst was obtained. XRD, BET, FTIR, XPS, ICP-MS, TEM, and SEM-EDX analysis were carried out for characterization of the sample. The maximum hydrogen production rate from the methanolysis reaction of NaBH₄ with this catalyst was 13215 ml min⁻¹ g_cat⁻¹. In addition, the activation energy was determined as 25.22 kJ/mol. At the same time, re-usability studies of the microalgal strain-supported Co-B catalyst were performed and it was found that there was no decrease in the % conversion for this catalyst, while the activity decreased. XRD, BET, FTIR, XPS, ICP-MS, TEM, and SEM-EDX.     

A novel Microcystis aeruginosa supported manganese catalyst for hydrogen generation through methanolysis of sodium borohydride

In this study, Microcystis Aeruginosa (MA)- microalgae species was used for the first time as a support material with metal ions loading to fabricate a highly efficient catalyst for the hydrogen generation through methanolysis of sodium borohydride (NaBH₄). Microalgae was pre-treated with hydrochloric acid (3 M HCl) for 24 h at 80 °C. Subsequently, different metal ions (Mn, Co, and Mo) were loaded to the pre-treated samples. Finally, metal-loaded samples were subjected to burning in oven to fabricate the catalyst. Primarily, manganese metal was selected based on the best metal performance. Afterwards, different metal loading ratios, burning temperatures and burning times were evaluated to synthesize the optimal MA-HCl-Mn catalyst. Results showed the optimal conditions as Mn ratio, burning temperature and time as 50%, 500 °C and 45 min, respectively. To characterize the catalyst, FTIR, SEM-EDX, XRD, XPS and TEM analyses were performed. Hydrogen generation via methanolysis was performed at various NaBH4 ratio of 1–7.5% while changing concentrations from 0.05 to 0.25 g catalysts with diverge temperatures of (30, 40, 50 and 60 °C). The maximum hydrogen generation rate (HGR) by this novel catalyst was found as 4335.3, 5949.9, 7649.4 and 8758.9 mLmin⁻¹gcat⁻¹, respectively. Furthermore, the activation energy was determined to be 8.46 kJ mol⁻¹.     

A novel hazelnutt bagasse based activated carbon as sodium borohydride methanolysis and electrooxidation catalyst

In this study, activated carbon is produced from defatted hazelnut bagasse at different activation conditions. The catalytic activities of activated carbons are evaluated for NaBH₄ methanolysis and electrooxidation. These materials are characterized by N₂ adsorption-desorption, FTIR, SEM-EDS and XPS and results show that these materials are prepared successfully. N₂ adsorption-desorption results reveal that activated carbon (FH3-500) has the highest BET surface area as 548 m²/g, total pore volume as 0.367 cm³/g and micropore volume as 0.205 cm³/g. On the orher hand, as a result of hydrogen production studies, FH3-500 activated carbon catalyst has the highest initial hydrogen production rate compared to other materials. At 50 °C, this metal-free activated carbon catalyst has a high initial hydrogen production rate of 13591.20 mL/min.g_cat, which is higher than literature values. Sodium borohydride electrooxidation measurements reveal that FH2-500 also has the highest electrocatalytic activity and stability. Hazelnut pulp-based activated carbons are firstly used as a metal-free catalyst in the methanolysis and electrooxidation of sodium borohydride, and its catalytic activity is good as a metal-free catalyst. The results show that the hazelnut pulp-based activated carbon catalyst is promising as a metal-free catalyst for the methanolysis and electrooxidation of sodium borohydride.     

Metal-free hybrid composite particles with phosphorus and oxygen-doped graphitic carbon nitride dispersed on kaolin for catalytic activity toward efficient hydrogen release

Here, hybrid kaolin-g-C₃N₄ heterostructure particles were fabricated by calcination in the first step, followed by hydrothermal phosphoric acid activation in the second step, and phosphorus (P) and oxygen (O) doped kaolin-g-C₃N₄ metal-free catalyst was synthesized. This hybrid metal-free catalyst was used for the first time for the production of effective hydrogen (H₂) from sodium borohydride (NaBH₄) methanolysis. The hydrogen generation rate (HGR) value of 5500 ml min⁻¹g⁻¹ was obtained with the P and O doped kaolin-g-C₃N₄ catalyst. The activation energy (Ea) of 31.90 kJ mol⁻¹ by P and O doped kaolin-g-C₃N₄ for the production of H₂ was obtained. The kaolin-g-C₃N₄ and P and O doped kaolin-g-C₃N₄ metal-free catalysts were systematically characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR). Based on the results obtained, the mechanism of P and O-doped kaolin-g-C₃N₄ catalyst on H₂ production from NaBH₄ methanolysis was also proposed.     

Acetic acid, a relatively green single-use catalyst for hydrogen generation from sodium borohydride

Acid-catalyzed hydrolysis of sodium borohydride (NaBH₄) has been studied (reactivity and kinetics) at high acid concentration (0.32 M). A mineral (hydrochloric acid, HCl) and an organic benign (acetic acid, CH₃COOH) acid have been chosen. Our study has three distinct objectives, namely: (i) combining the simplicity of the storage of solid NaBH₄ with the simplicity of the aqueous solution of acid; (ii) showing CH₃COOH can be as reactive as HCl in specific well-chosen operating conditions; and (iii) emphasizing the relative greenness of the CH₃COOH-based process. All of these objectives have been fulfilled and show that CH₃COOH is a benign relatively green acid catalyst of choice for catalyzing hydrogen generation from NaBH₄, the acid–water–NaBH₄ system being quite simple.     

Ethylene glycol as an alternative solvent approach for very efficient hydrogen production from sodium borohydride with phosphoric acid and acetic acid catalysts

For the first time, phosphoric acid (H₃PO₄) and acetic acid (CH₃COOH) catalysts were used for efficient hydrogen (H₂) production from sodium borohydride (NaBH₄) ethylene glycolysis reaction. In this experimental study, the effects of ethylene glycol/water ratio, ethylene glycol/acid ratio, NaBH₄ concentration, acid concentration, and temperature were investigated. These ethylene glycol/water ratio experiments showed that the use of water alongside ethylene glycol negatively affects H₂ production. The hydrogen generation rate (HGR) values obtained for this ethylene glycolysis reaction with 1 M H₃PO₄ and 1 M CH₃COOH catalysts are 5800 and 4542 mLmin^-1, respectively. Also, the completion times of ethylene glycolysis reactions with these acids are 8 and 10 s, respectively. The n value obtained for ethylene glycolysis reactions according to the power-law kinetic model was 0.50. The activation energies obtained with H₃PO₄ and CH₃COOH catalysts were 24.45 kJ mol^?1and 33.23 kJ mol^?1, respectively.     

Apricot Kernel shell waste treated with phosphoric acid used as a green,metal-free catalyst for hydrogen generation from hydrolysis of sodium borohydride

In this study, grinded apricot kernel shell (GAKS) biobased waste was used for the first time as a cost-effective, efficient, green and metal-free catalyst for hydrogen generation from the hydrolysis reaction of sodium borohydride (NaBH₄). For the hydrogen production by NaBH₄ hydrolysis reaction, GAKS was treated with various acids (HCl, HNO₃, CH₃COOH, H₃PO₄), salt (ZnCl₂) and base (KOH). As a result, the phosphoric acid (H₃PO₄) demonstrated better catalytic activity than other chemical agents. The hydrolysis of NaBH₄ with the GAKS-catalyst (GAKS_cat) was studied depending on different parameters such as acid concentration, furnace burning temperature and time, catalyst amount, NaBH₄ concentration and hydrolysis reaction temperature. The obtained GAKS_cat was characterized by ICP-MS, elemental analysis, TGA, XRD, FT-IR, Boehm, TEM and SEM analyses and was evaluated for its catalytic activity in the hydrogen production from the hydrolysis reaction of NaBH₄. According to the results, the optimal H₃PO₄ percentage was found as 15%. The maximum hydrogen generation rate from the hydrolysis of NaBH₄ with the GAKS_cat was calculated as 20,199 mL min⁻¹ g_cat⁻¹. As a result, it can be said that GAKS treated with 15% H₃PO₄ as a catalyst for hydrogen production is an effective alternative due to its high hydrogen production rate.     

Metal nanoparticles supported on polyacrylamide water beads as catalyst for efficient generation of H2 from NaBH4 methanolysis

Water beads made from polyacrylamide polymer p-(AAm) were decorated with high efficient metal nanoparticles by inexpensive, fast, simple, and environmental friendly method. These water beads balls were kept in the metal salt solutions for 4 h; to adsorb the metals ions from these aqueous solutions. The metal ions decorated on the p-(AAm) water beads were converted to metal nanoparticles by its reduction with aqueous solution of NaBH₄. The prepared materials p-(AAm) loaded with MNPs (M@p-(AAm)) were characterized by ATR-FTIR, XRD, XPS, FESEM, and EDS which show the successful preparation of MNPs over the surface and within p-(AAm). Afterwards the M@p-(AAm) were investigated as a catalyst for the generation of hydrogen from the methanolysis of NaBH₄. The Ag@p-(AAm) show good catalytic activity for NaBH₄ methanolysis reaction as compared to the other loaded MNPs. In addition, different parameters which effecting H₂ generation were also investigated such as; MNPs types, catalyst amount and temperature of the reaction. Low activation energy (Ea) of 21.37 ± 0.67 kJ mol⁻¹, was calculated for NaBH₄ methanolysis reaction at temperature ranging from 5.0 °C to 35 °C. Moreover, the catalyst reusability was also studied and found no decrease in percent conversion, however percent efficiency was decreases about 37% after completion of four cycles.     

Synthesis of cobalt-doped catalyst for NaBH4 hydrolysis using eggshell biowaste

In the present study, a cobalt-doped catalyst was prepared from chicken eggshell powder (CEP) biowaste to be used in the hydrolysis of sodium borohydride (NaBH₄). In the presence of the prepared catalyst (CEP_cat), possible effects of the parameters of NaOH concentration (%), catalyst amount (g), NaBH₄ concentration (%), process temperature (^oC) and reusability affecting the hydrolysis of sodium borohydride were examined. The CEP_cat obtained was characterized with FT-IR, TGA, XRD, SEM and EDX analyses. The hydrogen generation rate (HGR) was determined as 432 mL g_Co⁻¹ min⁻¹ in the presence of 1 g CEP_cat, a CoO/CaO ratio of 10/90 and 1% NaBH₄ concentration. The activation energy of the NaBH₄ hydrolysis reaction was calculated as 16.78 kJ mol⁻¹. After 16 reuses of the CEP_cat there was no significant decrease in the hydrogen volume. Compared to the first use while there was an increase in the HGR. These results showed that the CEP_cat prepared has a significant advantage over other catalysts for use in NaBH₄ hydrolysis.     

The use of metallurgical waste sludge as a catalyst in hydrogen production from sodium borohydride

In this study, the metallurgic sludge which contained oil and was obtained as waste of grinding, sharpening and milling parts was used in the production of hydrogen (H₂) from sodium borohydride (NaBH₄). The hydrolysis of NaBH₄ with the metallurgic sludge catalyst was investigated depending on several parameters such as sodium hydroxide (NaOH) concentration, catalyst amount, NaBH₄ concentration and temperature. The obtained metallurgic sludge catalyst was characterized by the XRD, FT-IR and SEM techniques and was evaluated for its activity in the H₂ generation from NaBH₄ hydrolysis. The maximum H₂ production rate from the hydrolysis of NaBH₄ with the metallurgic sludge catalyst was calculated as 9366 ml min⁻¹.g_cat⁻¹. The value of activation energy was found as 48.05 kJ mol⁻¹.     

Hydrogen production from sodium borohydride originated compounds: Fabrication of electrospun nano-crystalline Co3O4 catalyst and its activity

Electrospun nanofibers are prepared through electrospinning followed by post-treatment and preferred to use in catalytic applications. The electrospinning provides advantages for active catalysts design based on activity profiles and features of catalyst. In the present study, we fabricated nano-crystalline cobalt oxide (Co₃O₄) catalyst by electrospinning technique followed by thermal conditioning. Polyacrylonitrile (PAN) based Co as-spun mats (Co/NMs) with homogeneous diameter were prepared by electrospinnig process under several conditions as applied voltage (15–25 kV), working distance (5–7.5 cm) with the feed rate of 1 ml min⁻¹. The calcination process as a post-treatment was applied at different temperatures (232 °C, 289 °C and 450 °C) to obtain electrospun nano-crystalline Co₃O₄ catalyst. Co/NMs catalysts were characterized by XRD, SEM, TEM, XPS, FT-IR, TG/DTG, and ICP-MS techniques. The parametrically study was performed for evaluating the hydrogen production activity of catalyst from sodium borohydride (NaBH₄, SBH) and its originated compounds as ammonia borane (NH₃BH₃, AB) and methyl-amine borane (CH₃NH₂BH₃, MeAB). The relation between the internal-external properties and catalytic activities of catalysts for hydrogen production was investigated. The beadless Co/NMs-1 catalyst with homogeneous diameter was obtained under electrospinnig process conditions at 15 kV applied voltage and 7.5 cm working distance. All catalysts showed activity for hydrogen production, also the significant effect of post treatment process was observed on the catalytic activity as given order: Co/NMs-1₄₅₀ > Co/NMs-1₂₈₉ > Co/NMs-1 > Co/NMs-1₂₃₂. Furthermore, mesoporous Co₃O₄ cubic crystals (26 nm) in fibrous architecture was prepared by 450 °C-post-treatment. Hydrogen production rates were recorded at 60 °C as 2.08, 2.20, and 6.39 l H₂.g_cat⁻¹min⁻¹ for NaBH₄, CH₃NH₂BH₃, and NH₃BH₃, respectively.     

Optimisation of sepiolite clay with phosphoric acid treatment as support material for CoB catalyst and application to produce hydrogen from the NaBH4 hydrolysis

Herein, the CoB catalyst supported on the sepiolite clay treated with phosphoric acid was utilized to produce hydrogen from the NaBH₄ hydrolysis. In order to analyse the performance of the phosphoric acid treated sepiolite clay supported-CoB catalyst, the NaBH₄ concentration effect, phosphoric acid concentration effect, phosphoric acid impregnation time effect, CoB catalyst percentage effect, and temperature effect were studied. In addition, XRD, XPS, SEM, TEM, BET, and FTIR analysis were performed for characterization of Co–B catalyst supported on the acid-treated sepiolite. The completion time of this hydrolysis reaction with Co–B (20%) catalyst supported on the sepiolite treated by 5 M phosphoric acid was approximately 80 min, whereas the completion time of this hydrolysis reaction with acid-free sepiolite-supported Co–B (20%) catalyst was approximately 260 min. There is a five-fold increase in the maximum production rate. The maximum hydrogen production rates of this hydrolysis reaction at 30 and 60 °C were found as 1486 and 5025 ml min⁻¹g⁻¹_catalyst, respectively. Activation energy was found as 21.4 kJ/mol. This result indicates that the acid treatment on sepiolite is quite successful. The re-usability of NaBH₄ hydrolysis reaction by CoB catalyst supported on sepiolite treated phosphoric acid for successive five cycles of NaBH₄ at 30 °C was investigated.     

Chlorella vulgaris microalgae strain modified with zinc chloride as a new support material for hydrogen production from NaBH4 methanolysis using CuB,NiB, and FeB metal catalysts

This study aims to produce hydrogen (HG) from sodium borohydride (NaBH₄) methanolysis using CuB, NiB or FeB catalysts prepared with a different support material including C. vulgaris microalgae strain modified using zinc chloride (CMS-ZnCl₂). The NaBH₄ concentration, metal percentage in the supported-catalyst, the optimal ZnCl₂ percentage, and temperature effect on the NaBH₄ methanolysis were investigated. X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), and Scanning electron microscopy (SEM) analysis were performed for the CMS-ZnCl₂-CuB characterization. Also, the low activation energy (Ea) of 22.71 kJ mol⁻¹ was found with the supported catalyst obtained. Under the same conditions, nearly 100% conversion was achieved in the reusability experiments repeated five times, but a gradual decrease in catalytic activity was observed after each use.     

Multifunctional Co–B–O@CoxB catalysts for efficient hydrogen generation

The development of efficient and non-noble catalyst is of great significance to hydrogen generation techniques. Three surface-oxidized cobalt borides of Co–B–O@Co_xB (x = 0.5, 1 and 2) have been synthesized that can functionalize as active catalysts in both alkaline water electrolysis and the hydrolysis of sodium borohydride (NaBH₄) solution. It is discovered that oxidation layer and low boron content favor the oxygen evolution reaction (OER) activity of Co–B–O@Co_xB in alkaline water electrolysis. And surface-oxidized cobalt boride with low boron content is more active toward hydrolysis of NaBH₄ solution. An alkaline electrolyzer fabricated using the optimized electrodes of Co–B–O@CoB₂/Ni as cathode and Co–B–O@Co₂B/Ni as anode can deliver current density of 10 mA cm⁻² at 1.54 V for overall water splitting with satisfactory stability. Meanwhile, Co–B–O@Co₂B affords the highest hydrogen generation rate of 3.85 L min⁻¹ g⁻¹ for hydrolysis of NaBH₄ at 25 °C.     

CoB doped acid modified zeolite catalyst for enhanced hydrogen release from sodium borohydride hydrolysis

Cobalt-boron (CoB) catalyst supported on zeolite modified with hydrochloric acid (CoB-zeolite-HCl) and zeolite modified with acetic acid (CoB-zeolite-CH₃COOH) is prepared for the hydrogen (H₂) release from sodium borohydride (NaBH₄). The supported catalyst samples were characterized by X-ray diffraction spectroscopy (XRD), scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), nitrogen adsorption and, inductively coupled plasma optical emission spectroscopy (ICP-OES). The effects of Co metal loading, NaBH₄ concentration, NaOH concentration, temperature, and reusability on the catalytic performance of the CoB-zeolite-HCl catalyst were investigated. The completion time of the reaction using the raw zeolite supported CoB catalyst was about 265 min. However, the completion time of the reaction using the CoB-zeolite-HCl catalyst was decreased to about 80 min. BET surface area values showed that there is a 7-fold increase in the specific surface area for the zeolite activated with HCl compared to the BET surface area for the raw zeolite. The activation energy (Ea) of the catalyzed reaction was 42.45 kJ mol⁻¹.