三级连续化中空纤维膜生物反应工艺在丙烯酰胺微生物转化中的应用

以聚砜材料的中空纤维膜为膜组件设计了三级连续化的中空纤维膜生物反应工艺流程应用于丙烯酰胺的微生物转化过程.在研究了单级膜生物反应器的基础上,对三级连续化工艺的可行性进行了研究.20 ℃下,三级连续化过程稳定运行了80 h以上,丙烯腈的转化率达到了99.9％以上,整个过程的生产效率达到了每小时每克菌体催化合成25.3 g丙烯酰胺,并通过中空纤维膜使反应液和菌体得到有效的分离,在丙烯酰胺产物中没有检测到副产物丙烯酸.和现有的工业上应用的批式反应相比,生产能力提高了40％以上.该工艺过程以自由细胞替代了原有的固定化细胞,实现了稳定的连续化生产,具有良好的工业应用前景.本研究为进一步研究长期连续化生产过程的运行打下了基础.     

中空纤维更新液膜技术处理模拟含铜电镀废水

以10%(体积分数)LIX984N/煤油为液膜相,2 mol/L硫酸溶液为反萃相,研究了中空纤维更新液膜(HFRLM)技术对模拟电镀废水中二价铜离子的去除及浓缩效果,并讨论了停留时间对二价铜离子去除率的影响.结果表明,中空纤维更新液膜技术可同时实现废水中二价铜离子的分离与富集.经7级处理后,废水中二价铜离子的含量低于1.0 mg/L,二价铜离子的去除率为99.0%,达到国家排放标准;富集液中二价铜离子的浓度达1700 mg/L,富集因子为25.中空纤维更新液膜技术在含铜废水处理方面具有广阔的应用前景.     

反萃预分散支撑液膜技术回收电镀废水中铬离子的研究

采用磷酸二(2-乙基己基)酯(D2EHPA)-煤油-盐酸萃取-反萃体系,聚丙烯(PP)中空纤维膜作支撑膜,通过反萃预分散中空纤维支撑液膜(HFSLM-SD)技术处理含铬离子的电镀废水.考察了反萃取剂种类和浓度、跨膜压差、体积流量,组件装填率等参数对萃取率的影响.当盐酸浓度为1.0mol.L-1,跨膜压差为0.053MPa,原料液体积流量为.4.0L·h-1,反萃取液体积流量为3.0 L.h-1时,连续运行5 h,铬离子的萃取率可以达到96%以上.通过对该过程稳定性的研究,发现有机相能够稳定保持在支撑膜孔中,铬离子萃取率基本不变.     

采用超滤技术纯化甘露醇

本文开发了采用聚砜中空纤维超滤装置改造传统的由海带生产甘露醇的纯化工艺过程，经工业化生产连续一年运行的实际结果表明，装置性能稳妥可靠，单可膜组件透过液通量稳定保持在520L/h以上，包括设备折旧，电费，化学试剂以及劳动力费用在内，每生产1吨甘露醇仅增加成本94．2元，且产品质量明显提高，显著地提高了产品在国内外市场上的竞争能力。     

"双膜分离提纯法"在微生物法丙烯酰胺生产中的应用

介绍了聚偏氟乙烯中空纤维膜在微生物法丙烯酰胺生产中的应用,设计了内压膜装置TWF双向流工艺流程和"双膜分离提纯法"(即用聚偏氟乙烯中空纤维微滤膜浓缩和洗涤菌体);用聚偏氟乙烯中空纤维超滤膜对丙烯酰胺水合液进行分离,满足微生物法丙烯酰胺生产的需要,同时在整个行业得到了全面推广应用.     

中空纤维纳滤膜的应用性能

研究了中空纤维纳滤膜的长期稳定性,以及操作压力、进料液浓度对膜分离性能的影响。结果表明:中空纤维纳滤膜在长时间运行过程中分离性能稳定;随着操作压力的上升,膜的纯水通量增加,截留率提高;随着进料液浓度的增加,膜的渗透通量基本不变,截留率下降。     

中空纤维支撑液膜技术处理含铜废水

重金属废水的处理在环境保护和重金属资源综合利用方面都受到广泛的关注.采用中空纤维支撑液膜技术,用CuSO4水溶液模拟工业含Cu(Ⅱ)废水,二(2-乙基己基)磷酸(D2EHPA)/煤油为液膜相,盐酸为接受相,研究了液膜相组成、两相流速、流动方式等因素对中空纤维支撑液膜过程传质性能的影响.结果表明,料液相在管程流动时的传质通量大于料液相在壳程流动时的传质通量,传质通量随着管、壳程两相流速的增大及液膜相中载体浓度的增加而增大.模拟实验结果表明,中空纤维支撑液膜技术可同时实现废水中Cu(Ⅱ)的去除与浓缩,处理效果好.废水中Cu(Ⅱ)的去除率达97%以上,富集液中Cu(Ⅱ)浓缩倍数达5倍以上.     

中空纤维更新液膜处理含镍电镀废水

利用自制疏水聚偏氟乙烯(PVDF)中空纤维膜组件对中空纤维更新液膜处理含镍电镀废水过程中的影响因素进行了研究,考察了液膜两侧液相浓度、流速、萃取剂P204所占油相比例等因素对镍去除率的影响.并把中空纤维更新液膜和中空纤维支撑液膜处理效果进行了对比.     

盐酸作吸收剂用于气态膜法从废水中脱除/回收氨氮

考察了盐酸作吸收剂时用气态膜技术从水溶液中脱氨的可行性,鉴于盐酸的挥发性,着重考察了不同料液氨水浓度下气态膜过程可以稳定操作时所对应的吸收液中盐酸的临界浓度。在此基础上,研究了料液氨氮浓度、料液流速、吸收液流速、吸收液盐酸浓度和操作温度等操作参数对膜传质性能的影响,并考察了该工艺的长期操作稳定性。实验结果证明,气态膜脱氨过程可采用一定浓度的稀盐酸溶液作为吸收剂,并可通过向吸收液中不断添加浓盐酸的方式得到浓度为>15%的氯化铵溶液。在料液浓度为2000 mg/L、吸收液盐酸浓度为2%、操作温度为25 ℃的操作条件下,中空纤维膜组件持续稳定运行了650 h以上,总传质系数保持在4.25×10?6 m/s左右。用盐酸作吸收剂时废水中氨氮可脱至15 mg/L以下,符合国家环保标准。这表明采用盐酸作吸收液用气态膜法从废水中脱除回收富集氨氮是可行的。     

聚醚砜中空纤维膜的制备

讨论了在二次成形聚醚砜(PES)中空纤维膜的制备中,PES浓度和不同的填充液对中空纤维膜结构和性能的影响。结果发现:随着PES浓度的增大,中空纤维膜的水通量呈下降的趋势,确定了二次成形PES中空纤维膜制备中PES最佳浓度为24%;不同填充液与溶剂之间的相互扩散速率不同,得到了具有不同结构的聚醚砜中空纤维膜。随着填充液压力的提高,纤维的内径、外径增加,壁厚减小,水通量增大,一般填充液压力为0.020MPa。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。