Self‐assembled structures in blends of disordered and lamellar block copolymers: SAXS,SANS and TEM study

BACKGROUND: The phase behaviour of copolymers and their blends is of great interest due to the phase transitions, self‐assembly and formation of ordered structures. Phenomena associated with the microdomain morphology of parent copolymers and phase behaviour in blends of deuterated block copolymers of polystyrene (PS) and poly(methyl methacrylate) (PMMA), i.e. (dPS‐block‐dPMMA)₁/(dPS‐block‐PMMA)₂, were investigated using small‐angle X‐ray scattering, small‐angle neutron scattering and transmission electron microscopy as a function of molecular weight, concentration of added copolymers and temperature. RESULTS: Binary blends of the diblock copolymers having different molecular weights and different original micromorphology (one copolymer was in a disordered state and the others were of lamellar phase) were prepared by a solution‐cast process. The blends were found to be completely miscible on the molecular level at all compositions, if their molecular weight ratio was smaller than about 5. The domain spacing D of the blends can be scaled with M_n by D ～ M_n^2/3 as predicted by a previously published postulate (originally suggested and proved for blends of lamellar polystyrene‐block‐polyisoprene copolymers). CONCLUSIONS: The criterion for forming a single‐domain morphology (molecularly mixed blend) taking into account the different solubilization of copolymer blocks has been applied to explain the changes in microdomain morphology during the self‐assembling process in two copolymer blends. Evidently the criterion, suggested originally for blends of lamellar polystyrene‐block‐polyisoprene copolymers, can be employed to a much broader range of block copolymer blends. Copyright © 2008 Society of Chemical Industry     

Morphology and micromechanical deformation behavior of styrene–butadiene block copolymers. III. Binary blends of asymmetric star block copolymer with general‐purpose polystyrene

The correlation between morphology, mechanical properties, and micromechanical deformation behavior of the blends consisting of an asymmetric styrene/butadiene star block copolymer (ST2‐S74, total styrene volume content Φ_PS = 0.74) and general‐purpose polystyrene (GPPS) was investigated using transmission electron microscopy and uniaxial tensile testing. Addition of 20 wt % of GPPS to the block copolymer resulted in a drastic reduction in strain at break, indicating the existence of critical PS lamella thickness D_c. Above D_c lamellar block copolymers displayed a transition from ductile to brittle behavior, substantiating the mechanism of thin layer yielding proposed for lamellar star block copolymers. The blends showed a variety of deformation structures ranging from classical crazelike zones to those with internal shearlike components. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1208–1218, 2004     

Preparation,morphology and sonication time dependence of silver nanoparticles in amphiphilic block copolymers of PEO with polystyrene or PMMA

Composite materials comprising arrays of silver nanoparticles in amphiphilic copolymers have been prepared by sonochemically enhanced borohydride reduction of precursor silver nitrate (AgNO₃). The precursor was incorporated into the cores of polymeric micelles formed from block copolymers of polystyrene (PS) or poly(methyl methacrylate) (PMMA) with poly(ethylene oxide) (PEO). The copolymers were synthesised with varying hydrophobic block lengths from a PEO macroinitiator by atom transfer radical polymerization (ATRP). UV/visible spectroscopy was used to confirm the formation of elemental silver and the effect of sonication time on the appearance of the silver nanoparticles was determined. The growth was faster than when gold nanoparticles are formed in comparable block copolymers. Nanoparticles formed in copolymers with PMMA blocks were more stable to agglomeration than when polystyrene was used. Electron microscopy revealed the morphology of the nanocomposites which confirmed that both block copolymers are vehicles for the formation of well-defined films containing nanoparticulate silver. However, AgNP formation shows some significant differences from previous reports of gold NP containing materials formed under similar conditions.     

Enhancement of mechanical and optical performance of commercial polystyrenes by blending with siloxane‐based copolymers

Well‐defined poly(styrene‐block ‐dimethylsiloxane) copolymers (PS‐b ‐PDMS) with low polydispersity index (M_w /M_n ) and different compositions were synthesized by sequential anionic polymerization of styrene (S) and hexamethyl(ciclotrisiloxane) (D₃) monomers. Synthesized PS‐b ‐PDMS copolymers were characterized by ¹H‐nuclear magnetic resonance, size exclusion chromatography, Fourier transform infrared spectroscopy, and transmission electron microscopy. The physicochemical characterization determined that block copolymers have molar mass values close to ～135,000 g mol^?1, narrow M_w /M_n < 1.3, and chemical composition ranging from low to intermediate PDMS content. Blends of these copolymers with a commercial polystyrene (PS) were obtained by melt mixing and subsequently injection. Films obtained were flexible, and showed lower transparency than the original PS matrix. On the other hand, a 10 wt % incorporation of PS‐b ‐PDMS copolymers leads to better mechanical performance by enhancing elongation at break (～8.8 times higher) and opacity values (～18 times higher). In addition, UV–Vis barrier capacity of the resulting blends is also increased (up to 400% higher). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45122.     

Synthesis of block copolymers from PDMS macroinitiators

The synthesis of polystyrene‐b‐polydimethylsiloxane‐b‐polystyrene (PSt‐b‐PDMS‐b‐PSt) copolymers is described. Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide resulting in the PDMS macroinitiators. The terminal alkyl bromide groups were then used as initiators for atom transfer radical polymerization (ATRP) to produce block copolymers. Using this technique, triblock copolymers consisting of a PDMS centre block and polystyrene terminal blocks were synthesized. ATRP of St from those macroinitiators showed linear increases in M_n with conversion, demonstrating the effectiveness of ATRP to synthesize a variety of inorganic/organic polymer hybrids. Copyright © 2004 Society of Chemical Industry     

Improved toughness in HIPS obtained from different styrene/butadiene‐graded block copolymers through modification of the polydispersity index of the PS block

The polymerization of styrene in the presence of graded block copolymers with a polystyrene/polybutadiene composition of 40/60, 30/70, and 20/80 and with a polydispersity index (M_w /M_n ) in the polystyrene block varying from 1.1 to 1.6 was studied. As the polydispersity index of the polystyrene block increases, an improvement of up to 50% in the Izod impact toughness of the produced high‐impact polystyrene was achieved. The rubber particle morphology type, the size, and the volume fraction of the rubber phase particles could be modified through changes in the composition of the graded block copolymer. The changes that occurred in the rubber phase were mainly generated by the variation in the interfacial tension between the phases, and this variation was principally attributed to an increase in the polydispersity index of the polystyrene block in the precursor copolymer. POLYM. ENG. SCI., 46:1333–1341, 2006. © 2006 Society of Plastics Engineers     

Microhardness of styrene/butadiene block copolymer systems: Influence of molecular architecture

The influence of molecular architecture on the mechanical properties of styrene/butadiene block copolymers was investigated by means of the microhardness technique. It was found that the microhardness of the styrene/butadiene block copolymers is dictated by the nature of microphase separated morphology. In contrast to polymer blends and random copolymers, in which the microhardness generally follows the additivity rule, the behavior of the investigated block copolymers was found to significantly deviate depending on their molecular architecture. The glass‐transition temperature of the polystyrene phase (T_g‐PS), which practically remained constant and that of the polybutadiene phase (T_g‐PB), which varied with the change in the block copolymer architecture, apparently do not influence the microhardness values of the block copolymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1670–1677, 2003     

Associative properties of perfluorooctyl end‐functionalized polystyrene–poly(ethylene oxide) diblock copolymers

The synthesis of 2,2,3,3‐tetrahydro‐perfluoroundecanoyl end‐functionalized polystyrene–poly(ethylene oxide) block (PS‐block‐PEO‐R_F) copolymers and their matching PS‐block‐PEO diblock copolymers was carried out by sequential anionic polymerization. Viscometry and ¹⁹F NMR studies show that the PS‐block‐PEO copolymers, in contrast to their matching PS‐block‐PEO‐R_F copolymers, exhibit a micellar rather than the associative behavior seen for the latter. However, the presence of an excess of fluorinated acid, used for end‐functionalization, produces a reduction of the associative behavior above the overlap concentration, with the fluorinated acid acting like a surfactant. A competition may also occur between PS—and R_F—mediated micellization. Copyright © 2004 Society of Chemical Industry     

Synthesis of amphiphilic polystyrene–ionene diblock copolymers with controlled block lengths

Amphiphilic polystyrene-ionene diblock copolymers with blocks of controlled molecular weights were synthesized by a new method. The preparation starts with the anionic polymerization of styrene with 3-(dimethylamino)propyl-lithium as initiator, yielding tertiary amino end-functionalized polystyrenes of molecular weights that can be varied over a wide range from 1 to 100kg/mol, and a relatively low polydispersity (M?_w/M?_n = 1.1–1.4). The crucial step in this method is the stepwise coupling of the reactive end-group of the polystyrene with bromo- and tertiary-amino-terminated monodisperse oligomeric 2,4-ionenes. The amphiphilic polymers with well-defined block lengths were characterized by thin-layer chromatography, end-group titration and elemental analysis. Amphiphilic block copolymers with a monodisperse ionene block consisting of up to 10 quaternary ammonium groups could be derived.     

Low molecular weight block copolymers as plasticizers for polystyrene

Polystyrene‐b‐alkyl, polystyrene‐b‐polybutadiene‐b‐polystyrene, and polystyrene‐b‐poly(propylene glycol)monotridecyl ether were synthesized using macro initiators and atom transfer radical polymerization or by esterifications of homopolymers. The aim was a maximum molecular weight of 4 kg/mol and minimum polystyrene content of 50 w/w %, which by us is predicted as the limits for solubility of polystyrene‐b‐alkyl in polystyrene. DSC showed polystyrene was plasticized, as seen by a reduction in glass transition temperature, by block copolymers consisting of a polystyrene block with molecular weight of approximately 1 kg/mol and an alkyl block with a molecular weight of approximately of 0.3 kg/mol. The efficiency of the block copolymers as plasticizers increases with decreasing molecular weight and polystyrene content. In addition, polystyrene‐b‐alkyl is found to be an efficient plasticizer also for polystyrene‐b‐polyisoprene‐b‐polystyrene (SIS) block copolymers. The end use properties of SIS plasticized with polystyrene‐b‐alkyl, measured as tensile strength, is higher than for SIS plasticized with dioctyl adipate. The polystyrene‐b‐polybutadiene‐b‐polystyrene and polystyrene‐b‐poly(propylene glycol)monotridecyl ether series were only partially soluble in polystyrene and insoluble in the polystyrene phase of SIS. For the lowest molecular weight samples, this leads to measurable plasticization of polystyrene but no plasticization of SIS. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 981–991, 2005     

Synthesis and self-assembly behaviors of three-armed amphiphilic block copolymers via RAFT polymerization

The novel trifunctional reversible addition-fragmentation chain transfer (RAFT) agent, tris(1-phenylethyl) 1,3,5-triazine-2,4,6-triyl trithiocarbonate (TTA), was synthesized and used to prepare the three-armed polystyrene (PS₃) via RAFT polymerization of styrene (St) in bulk with thermal initiation. The polymerization kinetic plot was first order and the molecular weights of polymers increased with the monomer conversions with narrow molecular weight distributions (M_w/M_n ≤ 1.23). The number of arms of the star PS was analyzed by gel permeation chromatography (GPC), ultraviolet visible (UV-vis) and fluorescence spectra. Furthermore, poly(styrene-b-N-isopropylacrylamide)₃ (PS-b-PNIPAAM)₃, the three-armed amphiphilic thermosensitive block copolymer, with controlled molecular weight and well-defined structure was also successfully prepared via RAFT chain extension method using the three-armed PS obtained as the macro-RAFT agent and N-isopropylacrylamide as the second monomer. The copolymers obtained were characterized by GPC and ¹H nuclear magnetic resonance (NMR) spectra. The self-assembly behaviors of the three-armed amphiphilic block copolymers (PS-b-PNIPAAM)₃ in mixed solution (DMF/CH₃OH) were also investigated by high performance particle sizer (HPPS) and transmission electron microscopy (TEM). Interestingly, the lower critical solution temperature (LCST) of aqueous solutions of the three-armed amphiphilic block copolymers (PS-b-PNIPAAM)₃ decreased with the increase of relative length of PS in the block copolymers.     

Block copolymer molecular weight determination via gel permeation chromatography: Choosing a combining rule

We present a method for accurately determining the true molecular weights of narrow‐distribution block copolymers, using only a basic gel permeation chromatograph (GPC) equipped with a refractive index detector and calibrated with polystyrene standards. Our approach is based on the well‐known observation that GPC calibration curves for different homopolymers in good solvents are essentially parallel, allowing the curves for different polymers to be described by simple hydrodynamic equivalence ratios r_B versus polystyrene. We present values of r_B, in both toluene and tetrahydrofuran, for various polydiene and hydrogenated polydiene homopolymers commonly incorporated into commercial styrenic block copolymers. These values of r_B must be combined to yield the hydrodynamic equivalence ratio of the block copolymer, from which the block copolymer's true molecular weight can be determined. Three combining rules proposed in the literature are tested against a series of symmetric polystyrene–polybutadiene diblock copolymers of varying molecular weight. A simple linear combining rule accurately represents the results. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2056–2069, 2001     

Phase behavior for blends of styrene containing triblock copolymers with poly(2,6-dimethyl-1,4-phenylene oxide)

The extent to which the styrene end-blocks of three commercially available triblock copolymers can mix with a particular poly(2,6-dimethyl-1,4-phenylene oxide) (M_n = 22,600 and M_w = 34,000) or PPO has been examined by investigation of the glass transition behavior of the PPO and polystyrene (PS) portions of the blends using differential scanning calorimetry. Each block copolymer has a butadiene-based mid-block which was hydrogenated for two of these materials, but not the third. The three copolymers differ substantially in overall molecular weight and in molecula weight of the blocks. However, in analogy with the literature on blends of homopolymer polystyrene with styrene-based block copolymers, the molecular weight of the PS block should be the principal factor affecting the phase behavior in the present blends. Mixtures of the PPO with the block copolymers having PS blocks with M = 14,500 (nonhydrogenated midblock) and with M = 29,000 (hydrogenated mid-block) exhibited single composition-dependent T_gs for the hard phase, indicating complete mixing of PS segments with the PPO, for all proportions. On the other hand, the block copolymer having a PS block with M = 7,500 and a hydrogenated mid-block exhibited two separate hard phase T_gs corresponding to an essentially pure PPO phase and a PS-rich phase. For blends of homopolymer PS with styrene-based block copolymers, the similar two-phase behavior of the glassy portion can be readily explained by entropic considerations. For the present case, the favorable enthalpic contribution for mixing PPO and PS is an additional factor which seems to influence the restrictions on molecular weight for complete mixing; however, additional work is needed to develop a more quantitative assessment of this new issue.     

Characterization of aqueous micellar solutions of amphiphilic block copolymers of poly(acrylic acid) and polystyrene prepared via ATRP. Toward the control of the number of particles in emulsion polymerization

A series of diblock, triblock and star-block copolymers composed of polystyrene and poly(acrylic acid) were synthesized by ATRP. The structure of the copolymers, the size of the blocks and the composition were varied, keeping however a short polystyrene block and a poly(acrylic acid) content larger than 60 mol% to allow solubility in alkaline water. Their micellization was studied by static and dynamic light scattering and the influence of their structural characteristics on the aggregation number, N_agg, was examined at low salt concentration and alkaline pH. It was shown that micelles were in thermodynamic equilibrium and that N_agg followed the power law N_agg∼N_A^−0.9N_S² (with N_A, the total number of acrylic acid units in the copolymer and N_S, the total number of styrene units), that is characteristic of amphiphile micelles formed from strongly segregated block copolymers. Moreover, N_agg was independent of salt concentration in the investigated range. The same copolymers were previously used as stabilizers in emulsion polymerization [Macromolecules 34 (2001) 4439]. The final latex particle concentration, N_p, was compared with N_m, the initial micelle concentration. This enabled us to conclude that among the block copolymers studied, those with high acid content behaved like low molar mass surfactants. In contrast, those with low acid content formed stable micelles that could be directly nucleated to create latex particles, allowing a good control over N_p.     

Styrene polymerization with a macroinitiator having siloxane units

Block copolymers containing segments of poly(dimethylsiloxane) (PDMS) and polystyrene were synthesized. Dihydroxy terminated PDMS M_n 2500 g/mol, was reacted with an ali-phatic diisocyanate (isophorone diisocyanate) and an aliphatic hydroperxide (t-butyl hy-droperoxide). The resulting polymeric peroxycarbamate having siloxane units (a new mac-roinitiator) was used as free radical initiator for vinyl polymerization of styrene. Formation of block copolymers was illustrated by several characterization methods such as chemical and spectroscopic analysis, fractionation, and GPC. Mechanical and thermal characterization of the copolymers were made by stress–strain tests and DSC. The surface properties and the morphology of the block copolymers were investigated by contact angle measurements and SEM. © 1996 John Wiley & Sons, Inc.     

Structural characterisation of some polystyrene—polyisoprene copolymers

The various levels of organisation which may be distinguished in non-crystalline block copolymers are considered. An account is given of the application of low-angle X-ray diffraction and electron microscopy to the characterisation of the two-phase morphology and grain texture of some styrene/isoprene copolymers. The first group of copolymers to be considered contains two series of samples of the type S–I, (S–I–)₂X, (S–I–)₃Y, and (S–I–)₄Z where I is polyisoprene, S polystyrene and X, Y and Z are di-, tri- and tetra-functional coupling groups. The second group of copolymers which was subjected to a less detailed study than the first consists of just two polystyrene-g-polyisoprene samples.     

Effects of Polystyrene Block Content on Morphology and Adhesion Property of Polystyrene Block Copolymer

Effects of polystyrene block content on adhesion property and phase structure of polystyrene block copolymers were investigated. Polystyrene-block-polyisoprene-block-polystyrene triblock and polystyrene-block-polyisoprene diblock copolymers with different polystyrene block contents in the range from 13 to 35 wt% were used. In the case of the low polystyrene block content (below 16 wt%), a sea-island structure was observed: near-spherical polystyrene domains having a mean diameter of about 20 nm were dispersed in polyisoprene matrix. The phase structure changed from a sea-island structure to a cylindrical structure with an increase of polystyrene block content (over 18 wt%). Peel strength decreased with an increase of polystyrene block content and the pure triblock copolymers had lower peel strength than their blends with the diblock copolymers. Pulse nuclear magnetic resonance studies indicated that molecular mobility of polyisoprene phase decreased with an increase of polystyrene block content, and the molecular mobility was lower in the pure triblock than in the blend. Thus, the peel strength was found to be related to molecular mobility. The adhesion strength of the block copolymer depended on the molecular mobility: high molecular mobility can promote interfacial adhesion.     

Synthesis and characterization of (star po1ystyrene)-block- (linear polydimethylsi1oxane)-block-(star polystyrene) triblock copolymers

Summary (Star po1ystyrene)-block-(linear polydimethy1siloxane)-block-(Star polystyrene) triblock copolymers were synthesized by making living Star-shaped polystyrenes through a convergent living anionic polymerization procedure, followed by ring-opening polymerization of hexamethylcyclotrisiloxane (D₃) then difunctional coupling. The molecular weights of the resulting polymers were characterized by gel permeation chromatography (GPC), multi angle laser light scattering (MALLS) and ¹H NMR spectroscopy. Triblock copolymers with relatively narrow molecular weight distributions were obtained. Received: 22 April 2002/ Revised version: 15 August 2002/ Accepted: 16 August 2002 Correspondence to Daniel M. Knauss Email: dknauss@mines.edu, Fax: (303) 273 3629     

Preparation and characterization of polystyrene–poly(ethylene oxide) amphiphilic block copolymers via atom transfer radical polymerization: Potential application as paper coating materials

Poly(ethylene oxide) (PEO) monochloro macroinitiators or PEO telechelic macroinitiators (Cl‐PEO‐Cl) were prepared from monohydroxyfunctional or dihydroxyfunctional PEO and 2‐chloro propionyl chloride. These macroinitiators were applied to the atom transfer radical polymerization of styrene (S). The polymerization was carried out in bulk at 140°C and catalyzed by Copper(I) chloride (CuCl) in the presence of 2,2′‐bipyridine (bipy) ligand (CuCl/bipy). The amphiphilic copolymers were either A‐B diblock or A‐B‐A triblock type, where A block is polystyrene (PS) and B block is PEO. The living nature of the polymerizations leads to block copolymers with narrow molecular weight distribution (1.072 < M_w/M_n < 1.392) for most of the macroinitiators synthesized. The macroinitiator itself and the corresponding block copolymers were characterized by FTIR, ¹H NMR, and SEC analysis. By adjusting the content of the PEO blocks it was possible to prepare water‐soluble/dispersible block copolymers. The obtained block copolymers were used to control paper surface characteristics by surface treatment with small amount of chemicals. The printability of the treated paper was evaluated with polarity factors, liquid absorption measurements, and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. From our study, it is observed that the chain length of the hydrophilic block and the amount of hydrophobic block play an important role in modification of the paper surface. Among all of block copolymers synthesized, the PS‐b‐PEO‐b‐PS containing 10 wt % PS was found to retard water absorption considerably. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4304–4313, 2006     

Thiol-benzoxazine chemistry as a novel Thiol-X reaction for the synthesis of block copolymers

A novel synthetic procedure is reported for the preparation of block copolymers by means of successive 1,3-benzoxazine-thiol and Husigen type azide-alkyne coupling methodologies in one-pot and sequential synthesis. The applied 1,3-benzoxazine-thiol process based on catalytic opening of the lateral benzoxazine rings by thiols is proposed as a new thiol-X chemistry. Azide functional poly(methyl acrylate) (PMA-N₃), poly(ethylene glycol) (PEG-N₃) and thiol functional polystyrene (PS-SH) were prepared. The obtained PMA-N₃ or PEG-N₃, PS-SH and propargyl benzoxazine as a click-linker were reacted in sequential or one-pot two step manner to yield desired PS-b-PMA and PS-b-PEG block copolymer. The described thiol-benzoxazine chemistry offers a facile and efficient route to exploring the many possibilities in macromolecular synthesis.