Microstructural development of a ZrO2 Naβ″-Al2O3 composite

Microstructural development in Na-Al₂O₃ containing 15 vol% ZrO₂ particles is described. Intergranular ZrO₂ particles inhibit abnormal grain growth of the Na-Al₂O₃. The growth of the Na-Al₂O₃ grains and the intergranular ZrO₂ followed a cubic time law. Direct particle coalescence consisting of encounter and spheroidizing processes was found to be the basic growth mechanism for the intergranular ZrO₂     

Transport results from untwinned YBCO: Washboard frequency of the vortex lattice,and the quasiparticle mean free path

The washboard frequency of the moving vortex lattice in untwinned YBa₂ Cu₃ O_6.93 may be observed through mode-locking to an externally applied ac current of frequency _ext. The interference between and _ext results in jumps in the dc current-voltage characteristics when and _ext are harmonically related¹. The interference effect disappears in the vortex liquid state. The Hall conductivity _xy below T_c in YBCO contains contributions² from a positive quasiparticle (qp) term (H) and a negative vortex term (1/H). The qp term is surprisingly large well below T_c and implies a large gap anisotropy and a long qp mean free path (mfp). The thermal Hall effect³ _xy is closely related to the qp _xy; _xy is produced by asymmetric scattering of qp by pinned vortices. The qp mfp at H = 0, extracted from _xy and extended to low T by _xy, increases remarkably from 90 Å at T_c to more than 0.5m at 22 K.     

Normal-State Gap, Supercarrier Mass Anisotropy and Isotope Effects in La2?xSrxCuO4

Magnetization measurements have been performed on the oxygen-isotopeexchanged samples (¹⁶O and ¹⁸O) of the one-layer cuprate superconductorsLa_2–x Sr _x CuO₄ (0.06x0.20). We find that there is an oxygen-isotopeeffect on the effective supercarrier mass m**, which is huge for x=0.06,and reduced to a smaller value for x=0.15. We also find that there coexistsmall (bi)polarons and free carriers for x0.09, but only small (bi)polaronsare present for x0.09. The normal-state gap is related to the bipolaronbinding energy which is inversely proportional to x for 0.05x0.15. Theobserved isotope effects, supercarrier mass anisotropy, normal-state gap,and mid-infrared spectra for x0.09 can be quantitatively explained by the small(bi)polaron theory of superconductivity proposed by Alexandrov, Kabanov, andMott (AKM).     

Universality and the scaling laws in the superfluid phase transition of3He-4He mixtures

From the second-sound velocityU ₂ near the superfluid transition point, the superfluid densities in³He-⁴He mixtures, _s (X) and _s (), were deduced along the paths of constant³He concentrationX and of constant chemical potential difference of³He and⁴He. The following critical exponents of _s are determined: (a) =XX for _s (X) in the(X, T) plane,(b) X for _s (X) in the(, T) plane, and(c) for _s () in the(, T) plane. It is found that and _X change by about 4–6% relative to with increasing³He concentration up toX=0.4 and by 8–10% up toX=0.53. It seems that, belowX=0.53, universality hold for . Values of have been found to be in good agreement with the critical exponent of _s in pure⁴He under constant pressure. The values of and _X forX0.53 are also found to be consistent with the scaling relations in the (,T) plane of³He-⁴He mixture.Work performed in part while at the Electrotechnical Laboratory.     

Nonlinear asymptotic theory of hypersonic flow past a circular cone

Summary The hypersonic small-disturbance theory is reexamined in this study. A systematic and rigorous approach is proposed to obtain the nonlinear asymptotic equation from the Taylor-Maccoll equation for hypersonic flow past a circular cone. Using this approach, consideration is made of a general asymptotic expansion of the unified supersonic-hypersonic similarity parameter together with the stretched coordinate. Moreover, the successive approximate solutions of the nonlinear hypersonic smalldisturbance equation are solved by iteration. Both of these approximations provide a closed-form solution, which is suitable for the analysis of various related flow problems. Besides the velocity components, the shock location and other thermodynamic properties are presented. Comparisons are also made of the zeroth-order with first-order approximations for shock location and pressure coefficient on the cone surface, respectively. The latter (including the nonlinear effects) demonstrates better correlation with exact solution than the zeroth-order approximation. This approach offers further insight into the fundamental features of hypersonic small-disturbance theory.Notation a speed of sound - H unified supersonic-hypersonic similarity parameter, - K hypersonic similarity parameter, M - M freestream Mach number - P pressure - T temperature - S entropy - u, v radial, polar velocities - V freestream velocity - shock angle - cone angle - density - density ratio, /() - ratio of specific heats - polar angle - stretched polar angle, / - (), (), () gage functions     

A note on the similarity solutions for free convection on a vertical plate

Summary The similarity solutions for free convection on a vertical plate when the (non-dimensional) plate temperature is x and when the (non-dimensional) surface heat flux is –x are considered. Solutions valid for 1 and 1 are obtained. Further, for the first problem it is shown that there is a value ₀, dependent on the Prandtl number, such that solutions of the similarity equations are possible only for >₀, and for the second problem that solutions are possible only for >–1 (for all Prandtl numbers). In both cases the solutions becomes singular as ₀ and as –1, and the natures of these singularities are discussed.     

Flow visualization glass-ceramic: Preliminary experimental and modelling results

A glass-ceramic material was developed to act as a flow visualization material. Preliminary experiments indicate that aperiodic, thermally induced, convective flows can be sustained at normal processing conditions. These flows and the stress and temperature gradients induced are most likely responsible for the anomalous behaviour seen in these materials and the difficulties encountered in their development and in their production on industrial and experimental scales. A simple model describing the dynamics of variable-viscosity fluids was developed and was shown to be in qualitative agreement with more sophisticated models as well as with experimental results. The model was shown to simulate the dependence of the critical Rayleigh number for the onset of convection on the viscous properties of the fluid at low T, and also to simulate quenching behaviour when the temperature differences were high.Nomenclature C _p Heat capacity - D, E, F Expansion coefficients - H Height of the roll cell - Pr Prandtl number - R _a Rayleigh number - R _c Critical Rayleigh number for the onset of convection in a constant-viscosity fluid - S Dimensionless stream function - T Temperature - T _m Mean temperature - T ₀ Bottom surface temperature - T _r Reference temperature - a Aspect ratio of cell - g Acceleration due to gravity - k Thermal conductivity - k ₁ Function related to ²v/T ² - k ₂ Function related to ⁴v/T ⁴ - r Rayleigh number ratioR _a/R _c - t Time - w Dimensionless vertical coordinate - w _m Mean cell height - x Horizontal coordinate - y Dimensionless horizontal coordinate - z Vertical coordinate - , Constants - _t Thermal expansion coefficient - Constant in viscosity function - T Temperature difference between top and bottom surfaces - _i Viscosity coefficients - Kinematic viscosity - _m Mean kinematic viscosity - Dimensionless kinematic viscosity - Thermal diffusivity - Non-linear temperature function - Dimensionless non-linear temperature function - _o - Stream function - Dimensionless time - Eigenvalues     

Mössbauer studies of α″-Fe16N2 and α′-Fe8N films

Conversion-electron Mössbauer spectra of epitaxial -Fe₁₆N₂ and -Fe₈N films have been studied and their differences are discussed in detail. The Mössbauer spectrum of -Fe₁₆N₂ can be decomposed into three subspectra, which correspond to the 4d, 8h and 4c sites. The Mössbauer spectrum of -Fe₈N can be fitted using four spectra based on a nitrogen-atom-random-distribution model. The average hyperfine field is larger (3%) for -Fe₁₆N₂ than for -Fe₈N, which is approximately consistent with a 4.1% enhancement of the magnetic moments for -Fe₁₆N₂. The iron moments tend to locate in the film plane for -Fe₁₆N₂ and to arrange perpendicularly to the film plane for -Fe₈N.     

Heat transfer in plane film formation

A mathematical model is obtained for the process of cooling with formation of a planar film. The solution obtained is verified experimentally.Notation mean axial velocity gradient - v_x current axial velocity - v_o initial polymer velocity - v₁ sampling velocity - K draw ratio - deformation rate tensor - x, y, z spatial coordinates - X, Y dimensionless coordinates - L() differential operator - T temperature - T_o initial temperature - T_c temperature of surrounding medium - dimensionless temperature - dimensionless temperature averaged over film thickness - thermal-diffusivity coefficient - 2_o initial film thickness - thermal conductivity - heat-transfer coefficient - f(X) distance function - Bi Biot criterion, Bi_o, Biot criterion calculated for initial film thickness - Gz* modified Graetz criterion - V dimensionless velocity - ₁, ₂, ₃ heat-transfer coefficients produced by radiation, free convection, and forced convection - v_c, _c mean velocity and film half-thickness in formation zone - T₁ calculated temperature value - T₂ experimental temperature value - l formation zone length Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 37, No. 5, pp. 854–858, November, 1979.     

Phase decomposition in extruded Zn-Al based alloy

Ageing characteristics of an extruded eutectoid Zn-Al based alloy were investigated using X-ray diffraction and scanning electron microscopy techniques. The extruded alloy consisted of Al rich phase and Zn rich _E and phases. The original cast eutectoid Zn-Al alloy was extruded at 250 °C. Both supersaturated _s and _s phase decomposed during extrusion and appeared as fine and coarse lamellar structures. The _E and phases particles formed in the original interdendritic region. It was found that two Zn rich phases _E and decomposed sequentially during ageing at 170, 140 °C. The decomposition of the _E phase occurred as a discontinuous precipitation in the early stage of ageing and the decomposition of the phase took place in a four phase transformation: + T + in the prolonged ageing. Two typical morphologies of the decomposition of the Zn rich phases _E and were distinctive in back-scattered scanning electron microscopy.     

γ ? α2 Phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%)

The ₂ phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%) alloy has been studied by analytical electron microscopy. ₂ and phases were found at grain boundaries. ₂ layers that suspended in layers and interfacial ledge higher than 2d ₍₁₁₁₎ at /₂ interfaces were observed in the lamellar grains. These facts indicated that ₂ phase transformation and dynamic recrystallization have occurred during high temperature stress rupture deformation. It can be concluded that deformation induced ₂ phase transformation and dynamic recrystallization resulted in the presence of particles at grain boundaries. A structural and compositional transition area between deformation-induced ₂(or ) and its adjacently original (or ₂) phases was found by HREM and EDS and is suggested as a way to transform between and ₂ phase during high temperature stress rupture deformation. The transition area was formed by slide of partial dislocations on close-packed planes and diffusion of atoms.     

Thermal Conductivity of the Four-Leg Spin-Ladder System La2Cu2O5 Single Crystal

We have investigated the magnetic susceptibility, , and the thermal conductivity, , in magnetic fields for the four-leg spin-ladder system La₂Cu₂O₅ single crystal. The in a magnetic field parallel to the ladder exhibits a kink at 130 K in correspondence to the magnetic ordering. The along the ladder exhibits a peak at 25 K and a shoulder at 14 K, which are probably related to the thermal conductivity due to magnons, _magnon, and that due to phonons, _phonon, respectively. The perpendicular to the ladder, on the other hand, exhibits only one broad peak related to _phonon. The observed large anisotropy of has been explained based upon the anisotropy of _magnon.     

Application of a new iterative method for elastic-plastic stress analysis

A new iterative method for elastic-plastic stress analysis based on a new approximation of the constitutive equations is proposed and compared with standard methods on the accuracy and the computational time in a test problem. The proposed method appears to be better than the conventional methods on the accuracy and comparable with others on the computational time. Also the present method is applied to a crack problem and the results are compared with experimental ones. The agreement of both results are satisfactory.List of symbols u = (u ₁, u ₂) displacements u ^(H) = u ⁽ⁿ⁺¹⁾ - u ⁽ⁿ⁾ u _k ⁽ⁿ⁾ = u _(k ^{(n + 1)} - u ⁽ⁿ⁾ (n, k = 0, 1, 2, ...) - = ₁₁, ₂₂, ₁₂) stresses - = (₁₁, ₂₂, ₁₂) strains - = (₁₁, ₂₂, ₁₂) center of yield surface - D elastic coeffficient matrix, C = D ^–1 - von Mises yield function. The initial yielding is given by f() = _Y - f {f/} - ^* transposed f - H hardening parameter (assumed to be a positive constant for kinematic hardening problems) - time derivative of - [K] total elastic stiffness matrix - T traction vector - = [B] relation between nodal displacements and strains     

Volt-ampere characteristics of an ac arc in a transverse gas flow

An analytical dependence of the volt-ampere characteristic of an arc on the velocity of the incoming transverse gas flow is obtained. The stability threshold of arc combustion is determined.Notation h enthalpy - density - t time - v velocity - , thermal conductivity and electrical conductivity - E electric field strength - U potential at the arc - Q radiant flux - T period of oscillation of the current - r radius - l length of electric arc - d, L diameter and length of electrode - temperature - kinematic viscosity - Pr Prandtl number - current function Indices 0 gas parameters far from arc - 1 parameters at arc boundary - x projection on the axis 0x - y projection on the axis 0y - E effective value - e characteristic value Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 47, No. 1, pp. 133–138, July, 1984.     

Electronic specific heat of La2−xSrxCu1−yMyO4(M=Ga,Zn): Impurity effects on a D-wave superconductor

The electronic specific heat C_el was studied in Ga- and Zn-doped La_2–xSr_xCuO₄ (0.16x0.22) at T10K. Partial substitution of Ga or Zn for Cu suppresses T_c and revives the T-linear electronic specific heat, T, markedly. The (y)/n vs T_c/T_c0 relation for Zn-doped samples with x0.2 is in good agreement with the theoretical one for resonant impurity scattering in a d-wave superconductor, while those for Ga-doped samples and for Zn-doped samples with x 0.2 deviate slightly from the theoretical curve. The deviation will be discussed in relation to changes in the magnetic properties of 3d electrons.     

Thermal transport properties of helium near the superfluid transition. II. Dilute3He-4He mixtures in the superfluid phase

Measurements of the average thermal conductivity _exp hQ/T and of the thermal relaxation time to reach steady-state equilibrium conditions are reported in the superfluid phase for dilute mixtures of³He in⁴He. Hereh is the cell height,Q is the heat flux, andT is the temperature difference across the fluid layer. The measurements were made over the impurity range 2×10^–9<X(³He)<3×10^–2 and with heat fluxes 0.3<Q<160 µW/cm². Assuming the boundary resistanceR _b , measured forX<10^–5, to be independent ofX over the whole range ofX, a calculation is given for _exp. ForQ smaller than a well-defined critical heat fluxQ _c (X) X ^0.9, _exp is independent of Q and can be identified with the local conductivity _eff, which is found to be independent of the reduced temperature = (T–T)/T for –10^–2. Its extrapolated value at T is found to depart forX10^–3 from the prediction X ^–1 , tending instead to a weaker divergence X ^–a witha0.08. A finite conductivity asX tends to zero is not excluded by the data, however. ForQ >Q _c (X), a nonlinear regime is entered. ForX10^–6, the measurements with the available temperature resolution are limited to the nonlinear conditions, but can be extrapolated into the linear regime forX2×10^–7. The results for _exp(Q),Q _c (X), and _eff(XX) are found to be internally consistent, as shown by comparison with a theory by Behringer based on Khalatnikov's transport equations. Furthermore, the observed relaxation times (X) in the linear regime are found to be consistent forX>10^–5 with the hydrodynamic calculations using the measured _eff(X). ForX<10^–5, a faster relaxation mechanism than predicted seems to dominate. The transport properties in the nonlinear regimes are presented and unexplained observations are discussed.     

Varistor characteristics in PTCR-type (Ba,Sr)TiO3 ceramics prepared by single-step firing in air

This paper deals with donor, acceptor-codoped (Ba_0.4Sr_.6)TiO₃ ceramics with distinct varistor characteristics at room temperature, which were prepared by single-step firing in air. The materials, with the Curie point at around –90 °C, exhibited a large PTCR (positive temperature coefficient of resistivity) effect of more than seven orders of magnitude in the temperature range –90 °C (the resistivity 10³ · cm) to room temperature ( > 10¹⁰ · cm). An apparent dielectric constant of >20000 and tan < 0.05 (at 100 kHz) were observed for the present materials at room temperature, and moreover, the materials exhibited nonlinear current-voltage characteristics with the nonlinear coefficient, , in the range 7–12 and the varistor field, E_v, in the range 0.3–1.0 kV/cm. The value of in the present materials increased systematically with increasing in their PTCR temperature range. It has been found that there exists a close correlation between and the grain-boundary potential barrier height, e, obtained from the -T characteristic of the materials. An almost linear relationship was also found to exist between and log E_v for the present materials.     

Application of coherent-optical methods in physical studies of evaporation

The application of the methods of laser and holographic interferometry to the problems of measuring evaporation rates is examined. Mass transfer accompanying evaporation in the region of extradiffusion monitoring is studied.Notation j_v specific mass flux of the vapor, kg/(m²·sec) - _c coefficient of condensation - _v coefficient of evaporation - D coefficient of diffusion - m²/sec, wetting angle - R radius of the vessel, m - time, sec - h height of the segment, m - wavelength of the laser radiation, m - N order of the interference fringe or the number of fringes passing through a given point - density of the matter, kg/m³ - length of the cell with the liquid of interest, m - T temperature, K - n refractive index of the medium - m mass - kg, V volume of the spheroidal segment, m³ - _liq and _g molar mass, kg/mole - C₀ and C_p concentration of vapor in the gas, kg/m³ - a and b semiaxes of the spheroid, m - _e ellipsoidal coordinate of a point on the surface, m² - c/n derivative along the normal - r coordinate of a point on the surface of evaporation, m - n change in the refractive index of the medium Indices st standard liquid - liq liquid - g gas - 0 starting state - p equilibrium pressure Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 55, No. 4, pp. 605–611, October, 1988.     

Eutectic solidification characteristics of Bridgman grown AI-3Fe-0.1V alloy

Eutectic solidification characteristics of Al-2.85 wt%Fe-0.12 wt% Valloy have been investigated by steady-state growth over the range of solidification front velocity from 51 to 1030m/s and temperature gradient 8 to 15 K/mm. Increasing growth velocity displaced the Al-Al3Fe eutectic by Al-AlxFe eutectic rather than by the Al-Al6Fe eutectic obtained for the binary Al-3 wt%Fe alloy. A fully Al-AlxFe eutectic structure has been obtained for the first time in the vanadium-containing alloy over the growth velocity range from 71 to1030m/s except at 100 and 510m/s where some Al dendrites were present in the eutectic matrix. TheAl-AlxFe eutectic was observed to undergo a morphological transition from lamellar to rod-like with increasing growth velocity concurrently with formation of a cellular eutectic structure. It was found that the relationship = Av–1/2, between eutectic spacing and growth velocity v, was applicable with A = 22.4 ± 1.8 and 13.8 ± 2.1 m3/2s–1/2 for lamellar and rod-like Al-AlxFe eutectics, respectively.