Heating with wind: Economics of heat pumps and variable renewables

With the growth of wind and solar energy in electricity supply, the electrification of space and water heating is becoming a promising decarbonization option. In turn, such electrification may help the power system integration of variable renewables, for two reasons: thermal storage could provide low-cost flexibility, and heat demand is seasonally correlated with wind power. However, temporal fluctuations in heat demand may also imply new challenges for the power system. This study assesses the economic characteristics of electric heat pumps and wind energy and studies their interaction on wholesale electricity markets. Using a numerical electricity market model, we estimate the economic value of wind energy and the economic cost of powering heat pumps. We find that, just as expanding wind energy depresses its €/MWh_el value, adopting heat pumps increases their €/MWh_el cost. This rise can be mitigated by synergistic effects with wind power, “system-friendly” heat pump technology, and thermal storage. Furthermore, heat pumps raise the wind market value, but this effect vanishes if accounting for the additional wind energy needed to serve the heat pump load. Thermal storage facilitates the system integration of wind power but competes with other flexibility options. For an efficient adoption of heat pumps and thermal storage, we argue that retail tariffs for heat pump customers should reflect their underlying economic cost.     

Towards a peer-to-peer hydrogen economy framework

The research community is seeking for novel technological/business models to speed up the decarbonization process, i.e. a decreasing relative reliance on carbon. The completion of decarbonization ultimately depends on the production and use of pure hydrogen as energy carrier. With respect to electricity, which is currently the most relevant and clean energy carrier, hydrogen has a fundamental advantage that it can be stored efficiently.In this research context, we propose a Peer-to-Peer Hydrogen Economy Framework based on decentralized production, storage and trading of energy. We apply the peer-to-peer paradigm for designing a virtual network, where peer software entities implement distributed algorithms for the localization of remote energy providers. The proposed approach has many advantages, both technical (availability, robustness, scalability) and socio-economic (shared responsibilities and improved competition).     

An overview of solar decarbonization processes,reacting oxide materials,and thermochemical reactors for hydrogen and syngas production

Solar decarbonization processes are related to the different thermochemical conversion pathways of hydrocarbon feedstocks for solar fuels production using concentrated solar energy as the external source of high-temperature process heat. The main investigated routes aim to convert gaseous and solid feedstocks (methane, coal, biomass …) into hydrogen and syngas via solar cracking/pyrolysis, reforming/gasification, and two-step chemical looping processes using metal oxides as oxygen carriers, further associated with thermochemical H₂O/CO₂ splitting cycles. They can also be combined with metallurgical processes for production of energy-intensive metals via solar carbothermal reduction of metal oxides. Syngas can be further converted to liquid fuels while the produced metals can be used as energy storage media or commodities. Overall, such solar-driven processes allow for improvements of conversion yields, elimination of fossil fuel or partial feedstock combustion as heat source and associated CO₂ emissions, and storage of intermittent solar energy in storable and dispatchable chemical fuels, thereby outperforming the conventional processes. The different solar thermochemical pathways for hydrogen and syngas production from gaseous and solid carbonaceous feedstocks are presented, along with their possible combination with chemical looping or metallurgical processes. The considered routes encompass the cracking/pyrolysis (producing solid carbon and hydrogen) and the reforming/gasification (producing syngas). They are further extended to chemical looping processes involving redox materials as well as metallurgical processes when metal production is targeted. This review provides a broad overview of the solar decarbonization pathways based on solid or gaseous hydrocarbons for their conversion into clean hydrogen, syngas or metals. The involved metal oxides and oxygen carrier materials as well as the solar reactors developed to operate each decarbonization route are further described.     

Effect of g-C3N4 amount on green synthesized GdFeO3/g-C3N4 nanocomposites as promising compounds for solid-state hydrogen storage

Hydrogen energy is a key role in novel renewable energy production/consumption technologies. Traditional hydrogen energy systems are suffered from low density, high production cost, low efficiency, and storage complications. With the start of solid-state hydrogen storage technology, many of above deficiencies are fulfilled, however, there are several unknown points, particularly in metal oxides, which need more attention. Hydrogen sorption on the layered materials or inside porous materials is a hopeful key to drawbacks for high-performance hydrogen sorption. Hereupon, layered solids with the merit of hydrogen sorption are introduced, for the first time, including “nanostructured bi-metal oxide (BMO)” and “graphitic carbon nitride (CN)”. Perovskites are ceramic and they are hard materials so they could be a favorable candidate for solid-state hydrogen storage. g-C₃N₄ has attractive features including high surface area, chemical stability, small band gap, and low-cost synthesis methods but also has great potential as an electrode material for energy storage capacitors. The main motivation for this study comes from the potential applications for perovskite materials and graphitic carbon nitride for the solid-state hydrogen storage method. The Perovskite type GdFeO₃ nanostructures (as BMO) synthesized through sol-gel approach in front of natural source of Grape juice as both complexing agent and fuel. The experimental scrutinization ascertains an original fabrication of GdFeO₃ (GF) nanostructures in Grape juice at 800 °C, with an approximately uniform nanosized structure of 70 nm on average. The obtained pure GF nanostructures are then utilized for nanocomposite formation based on g-C₃N₄ (CN) with different amounts. The resulting nanocomposites with the ratio of 1:2 from GF:CN perform a preferable hydrogen sorption capacity, in terms of “maximum discharge capacity of 577 mAhg^?1” in 2 M KOH electrolyte. It should be declared that however, the discharge capacity of the nanostructured GF is 188 mAhg^?1. It can be emphasized that these GF/CN nanocomposites can be utilized as hopeful hosts in an electrochemical hydrogen storage setup due to the synergic effect of g-C₃N₄ with essential characteristics in cooperation with BMO nanostructures as acceptable electrocatalysts.     

Modeling of hydrogen and electrical energy storages in wind/PV energy system on the Lake Baikal coast

The paper presents a research on a green power supply system (producing no carbon dioxide and other harmful emissions) in the area of Baikal Lake, for the maximum loads of 10 kW and 100 kW. The system includes photovoltaic converters, wind turbines, batteries for electric energy storage and a system for hydrogen production, storage and energy use. Calculations based on the optimization mathematical model demonstrated the efficiency of the combined use of wind and solar energy in the considered areas, as well as the simultaneous storage of electric energy and hydrogen. The electric energy storage is most efficient for short-term time intervals whereas an increase in the duration of continuous energy “standstills” up to several days makes the storage of hydrogen more cost-effective.     

Flexibility improvement evaluation of hydrogen storage based on electricity–hydrogen coupled energy model

To achieve carbon neutrality by 2060, decarbonization in the energy sector is crucial. Hydrogen is expected to be vital for achieving the aim of carbon neutrality for two reasons: use of power-to-hydrogen (P2H) can avoid carbon emissions from hydrogen production, which is traditionally performed using fossil fuels; Hydrogen from P2H can be stored for long durations in large scales and then delivered as industrial raw material or fed back to the power system depending on the demand. In this study, we focus on the analysis and evaluation of hydrogen value in terms of improvement in the flexibility of the energy system, particularly that derived from hydrogen storage. An electricity–hydrogen coupled energy model is proposed to realize the hourly-level operation simulation and capacity planning optimization aiming at the lowest cost of energy. Based on this model and considering Northwest China as the region of study, the potential of improvement in the flexibility of hydrogen storage is determined through optimization calculations in a series of study cases with various hydrogen demand levels. The results of the quantitative calculations prove that effective hydrogen storage can improve the system flexibility by promoting the energy demand balance over a long term, contributing toward reducing the investment cost of both generators and battery storage and thus the total energy cost. This advantage can be further improved when the hydrogen demand rises. However, a cost reduction by 20% is required for hydrogen-related technologies to initiate hydrogen storage as long-term energy storage for power systems. This study provides a suggestion and reference for the advancement and planning of hydrogen storage development in regions with rich sources of renewable energy.     

A review of hydrogen production processes by photocatalytic water splitting – From atomistic catalysis design to optimal reactor engineering

‘Renewable energy is an essential part of our strategy of decarbonization, decentralization, as well as digitalization of energy.’ – Isabelle Kocher.Current climate, health and economic condition of our globe demands the use of renewable energy and the development of novel materials for the efficient generation, storage and transportation of renewable energy. Hydrogen has been recognised as one of the most prominent carriers and green energy source with challenging storage, enabling decarbonization. Photocatalytic H₂ (green hydrogen) production processes are targeting the intensification of separated solar energy harvesting, storage and electrolysis, conventionally yielding O₂/H₂. While catalysis is being investigated extensively, little is done on bridging the gap, related to reactor unit design, optimisation and scaling, be it that of material or of operation. Herein, metals, oxides, perovskites, nitrides, carbides, sulphides, phosphides, 2D structures and heterojunctions are compared in terms of parameters, allowing for efficiency, thermodynamics or kinetics structure–activity relationships, such as the solar-to-hydrogen (STH). Moreover, prominent pilot systems are presented summarily.     

Magnesium based materials for hydrogen based energy storage: Past,present and future

Magnesium hydride owns the largest share of publications on solid materials for hydrogen storage. The “Magnesium group” of international experts contributing to IEA Task 32 “Hydrogen Based Energy Storage” recently published two review papers presenting the activities of the group focused on magnesium hydride based materials and on Mg based compounds for hydrogen and energy storage. This review article not only overviews the latest activities on both fundamental aspects of Mg-based hydrides and their applications, but also presents a historic overview on the topic and outlines projected future developments. Particular attention is paid to the theoretical and experimental studies of Mg-H system at extreme pressures, kinetics and thermodynamics of the systems based on MgH₂, nanostructuring, new Mg-based compounds and novel composites, and catalysis in the Mg based H storage systems. Finally, thermal energy storage and upscaled H storage systems accommodating MgH₂ are presented.     

Fuel cells for carbon capture and power generation: Simulation studies

The decarbonization of hydrocarbons is explored in this work as a method to produce hydrogen and mitigate carbon dioxide (CO₂) emissions. An integrated process for power generation and carbon capture based on a hydrocarbon fueled-decarbonization unit was proposed and simulated. Ethane and propane were used as fuels and subjected to the thermal decomposition (decarbonization) process. The system is also composed of a carbon fuel cell (CFC) and hydrogen fuel cell (HFC) for the production of power and a pure CO₂ stream that is ready for sequestration. The HFC is a high-temperature proton exchange membrane fuel cell operating at 200 °C. Simulations were performed using ASPEN HYSYS V.10 for the entire process including the CFC and HFC being operated at various operating temperatures (200–800 °C). The power output from the CFC and the HFC as well as the overall process efficiency were calculated. The model incorporates an energy recovery system by adopting a counter-current shell and tube heat exchangers and a turbine. The water produced from the fuel cell system can be utilized in the plant to recover the heat from the furnace. The results showed a 100% carbon capture with a nominal plant capacity of 108 MWe produced when propane fuel was fed to the decarbonizer. The CFC theoretical efficiency is 100% and the practical efficiency was taken as 70% when all internal polarizations were considered. The results showed that, in the case of propane, the CFC power output was 89 MWe when the CFC operated at 650 °C, and the HFC power output was around 45 MWe at 200 °C with an overall actual plant efficiency of 35% and 100% carbon capture. Sensitivity analysis recommends a hydrocarbon fuel cost of 0.011 $/kW as the most feasible option. The results reported here on the decarbonization of hydrocarbon fuels are promising toward the direct production of hydrogen with full carbon dioxide sequestration at a potentially lower cost especially in rural areas. The overall actual efficiencies are very competitive to those of conventional power plants operated without carbon capture.     

Adapting the zero-emission Graz Cycle for hydrogen combustion and investigation of its part load behavior

A modern energy system based on renewable energy like wind and solar power inevitably needs a storage system to provide energy on demand. Hydrogen is a promising candidate for this task. For the re-conversion of the valuable fuel hydrogen to electricity a power plant of highest efficiency is needed.In this work the Graz Cycle, a zero-emission power plant based on the oxy-fuel technology, is proposed for this role. The Graz Cycle originally burns fossil fuels with pure oxygen and offers efficiencies up to 65% due to the recompression of about half of the working fluid. The Graz Cycle is now adapted for hydrogen combustion with pure oxygen so that a working fluid of nearly pure steam is available. The changes in the thermodynamic layout are presented and discussed. The results show that the cycle is able to reach a net cycle efficiency based on LHV of 68.43% if the oxygen is supplied “freely” from hydrogen generation by electrolysis.An additional parameter study shows the potential of the cycle for further improvements. The high efficiency of the Graz Cycle is also achieved by a close interaction of the components which makes part load operation more difficult. So in the second part of the paper strategies for part load operation are presented and investigated. The thermodynamic analysis predicts part load down to 30% of the base load at remarkably high efficiencies.     

Hydrogen from solar energy,a clean energy carrier from a sustainable source of energy

Solar energy is going to play a crucial role in the future energy scenario of the world that conducts interests to solar-to-hydrogen as a means of achieving a clean energy carrier. Hydrogen is a sustainable energy carrier, capable of substituting fossil fuels and decreasing carbon dioxide (CO₂) emission to save the world from global warming. Hydrogen production from ubiquitous sustainable solar energy and an abundantly available water is an environmentally friendly solution for globally increasing energy demands and ensures long-term energy security. Among various solar hydrogen production routes, this study concentrates on solar thermolysis, solar thermal hydrogen via electrolysis, thermochemical water splitting, fossil fuels decarbonization, and photovoltaic-based hydrogen production with special focus on the concentrated photovoltaic (CPV) system. Energy management and thermodynamic analysis of CPV-based hydrogen production as the near-term sustainable option are developed. The capability of three electrolysis systems including alkaline water electrolysis (AWE), polymer electrolyte membrane electrolysis, and solid oxide electrolysis for coupling to solar systems for H₂ production is discussed. Since the cost of solar hydrogen has a very large range because of the various employed technologies, the challenges, pros and cons of the different methods, and the commercialization processes are also noticed. Among three electrolysis technologies considered for postulated solar hydrogen economy, AWE is found the most mature to integrate with the CPV system. Although substantial progresses have been made in solar hydrogen production technologies, the review indicates that these systems require further maturation to emulate the produced grid-based hydrogen.     

Achieving CO2 reductions in Colombia: Effects of carbon taxes and abatement targets

In this paper we investigate CO₂ emission scenarios for Colombia and the effects of implementing carbon taxes and abatement targets on the energy system. By comparing baseline and policy scenario results from two integrated assessment partial equilibrium models TIAM-ECN and GCAM and two general equilibrium models Phoenix and MEG4C, we provide an indication of future developments and dynamics in the Colombian energy system. Currently, the carbon intensity of the energy system in Colombia is low compared to other countries in Latin America. However, this trend may change given the projected rapid growth of the economy and the potential increase in the use of carbon-based technologies. Climate policy in Colombia is under development and has yet to consider economic instruments such as taxes and abatement targets. This paper shows how taxes or abatement targets can achieve significant CO₂ reductions in Colombia. Though abatement may be achieved through different pathways, taxes and targets promote the entry of cleaner energy sources into the market and reduce final energy demand through energy efficiency improvements and other demand-side responses. The electric power sector plays an important role in achieving CO₂ emission reductions in Colombia, through the increase of hydropower, the introduction of wind technologies, and the deployment of biomass, coal and natural gas with CO₂ capture and storage (CCS). Uncertainty over the prevailing mitigation pathway reinforces the importance of climate policy to guide sectors toward low-carbon technologies. This paper also assesses the economy-wide implications of mitigation policies such as potential losses in GDP and consumption. An assessment of the legal, institutional, social and environmental barriers to economy-wide mitigation policies is critical yet beyond the scope of this paper.     

A Techno-Economic Analysis of solar hydrogen production by electrolysis in the north of Chile and the case of exportation from Atacama Desert to Japan

H₂ production from solar electricity in the region of the Atacama Desert – Chile – has been identified as strategical for global hydrogen exportation. In this study the full supply chain of solar hydrogen has been investigated for 2018 and projected to scenarios for 2025-2030. Multi-year hourly electrical profiles data have been used from real operating PV plants and simulated Concentrated Solar Power “CSP” plants with Thermal Energy Storage “TES” as well as commercial electricity Power Purchase Agreement “PPA” prices reported in the Chilean electricity market were considered. The Levelized Cost of Hydrogen “LCOH” of each production pathway is calculated by a case-sensitive techno-economic MATLAB/Simulink model for utility scale (multi-MW) alkaline and PEM electrolyser technologies. Successively, different distribution, storage and transportation configurations are evaluated based on the 2025 Japanese case study according to the declared H₂ demand. Transport in the form of liquefied hydrogen (LH₂) and via ammonia (NH₃) carrier is compared from the port of Antofagasta, CL to the port of Osaka, JP.     

Carbon-neutral economy with fossil fuel-based hydrogen energy and carbon materials

Hydrocarbon fossil fuels can be considered as hydrogen ores for CO₂-free energy, and carbon ores for carbonaceous construction materials. Hydrogen fuel can be extracted from fossil fuels by decarbonization, and used as an energy resource. The carbon byproduct can be used as a versatile construction material. Carbon materials would sequester carbon, and replace CO₂-generating steel and concrete. Approximate comparison of the global consumption of energy and construction materials suggests a rough mass balance of energy and materials markets. The cost of foregoing the carbon energy content as a fuel can be easily offset by the value of the carbon-based construction material. The nature and properties of carbon materials and conventional infrastructural materials are compared.     

Carbon black and hydrogen production process analysis

The adoption of new environmentally responsible technologies, as well as, energy efficiency improvements in equipment and processes help to reduce CO2 rate emission into the atmosphere, contributing in delaying the consequences of intensive use of fossil fuels. For more effective actions, it is necessary to make the transition from the fossil-based to the renewable source economy. In this context, hydrogen fuel has a special role as clean vector of energy. Hydrogen has the potential to be decisive in mitigating greenhouse gas emissions, but fossil fuels high profitability due to global energy dependency actually drives the global economy.While renewable energy sources are not worldwide fully established, new technologies should be developed and used for the recovery of energetic streams nowadays wasted, to decarbonize hydrocarbons and to improve systems efficiency creating a path that can help nations and industries in the needed energy economy transition. Hydrogen gas can be generated by various methods from different sources such as coal and water. Currently, almost all of the hydrogen production is for industrial purpose and comes from the Steam Reforming, while the use of hydrogen in fuel cells is only incipient.The article analysis the plasma pyrolysis of hydrocarbons as a decarbonization option to contribute as a step towards hydrogen economy. It presents the Carbon Black and Hydrogen Process (CB&H Process) as an alternative option for hydrogen generation at large scale facility, suitable for supplying large amounts of high-purity carbon in elemental form. CB&H Process refers to a plant with hydrogen thermal plasma reactor able to decompose Hydrocarbons (HC's) into Hydrogen (H2) and Carbon Black (CB), a cleaner technology than its competing processes, capable of generating two products with high added value. Considering the Brazilian context in which more than 80% of the generated electricity comes from renewable sources, the use of electricity as one of the inputs in the process does not compromise the objective of reducing greenhouse gas emissions. It is important to consider that the use of renewable energy to produce two products derived from fossil fuels in a clean way represents integration of technologies into a more efficient system and an arrangement that contributes to the transition from fossil fuels to renewables.The economic viability of the CB&H process as a hydrogen generation unit (centralized) for refining applications also depends on the cost of hydrogen production by competing processes. Steam Methane Reforming (SMR) is a widespread method that produces twice the amount of hydrogen generated by natural gas plasma pyrolysis, but it emits CO2 gas and consumes water, while CB&H process produces solid carbon. For this reason, the paper seeks the carbon production cost by plasma pyrolysis as a breakeven point for large-scale hydrogen generation without water consumption and carbon dioxide emissions.     

A comprehensive review on energy management strategies of hybrid energy storage system for electric vehicles

The attention on green and clean technology innovations is highly demanded of a modern era. Transportation has seen a high rate of growth in today's cities. The conventional internal combustion engine‐operated vehicle liberates gasses like carbon dioxide, carbon monoxide, nitrogen oxides, hydrocarbons, and water, which result in the increased surface temperature of the earth. One of the optimum solutions to overcome fossil fuel degrading and global warming is electric vehicle. The challenging aspect in electric vehicle is its energy storage system. Many of the researchers mainly concentrate on the field of storage device cost reduction, its age increment, and energy densities' improvement. This paper explores an overview of an electric propulsion system composed of energy storage devices, power electronic converters, and electronic control unit. The battery with high‐energy density and ultracapacitor with high‐power density combination paves a way to overcome the challenges in energy storage system. This study aims at highlighting the various hybrid energy storage system configurations such as parallel passive, active, battery–UC, and UC–battery topologies. Finally, energy management control strategies, which are categorized in global optimization, are reviewed. Copyright © 2017 John Wiley & Sons, Ltd.     

Design of hybrid power-to-power systems for continuous clean PV-based energy supply

The increasing penetration of intermittent renewable sources, fostering power sector decarbonization, calls for the adoption of energy storage systems as an essential mean to improve local electricity exploitation, reducing the impact of distributed power generation on the electric grid. This work compares the use of hydrogen-based Power-to-Power systems, battery systems and hybrid hydrogen-battery systems to supply a constant 1 MW_el load with electricity locally generated by a photovoltaic plant. A techno-economic optimization model is set up that optimizes the size and annual operation of the system components (photovoltaic field, electrolyzer, hydrogen storage tanks, fuel cell and batteries) with the objective of minimizing the annual average cost of electricity, while guaranteeing an imposed share of local renewable self-generation. Results show that, with the present values of investment costs and grid electricity prices, the installation of an energy storage system is not economically attractive by itself, whereas the installation of PV panels is beneficial in terms of costs, so that the baseline optimal solution consists of a 4.2 MW_p solar field capable to self-generate 33% of the load annually. For imposed shares of self-generation above 40%, decoupling generation and consumption becomes necessary. The use of batteries is slightly less expensive than the use of hydrogen storage systems up to a 92% self-generation rate. Above this threshold, seasonal storage becomes predominant and hybrid storage becomes cheaper than batteries. The sale of excess electricity is always important to support the plant economics, and a sale price reduction sensibly impacts the results. Hydrogen storage becomes more competitive when the need for medium and long terms energy shift increases, e.g. in case of having a cap on the available PV capacity.     

Seasonal storage of hydrogen in stationary systems with liquid organic hydrides

A comparison of energy storage media for carbon free systems was made on a cost and weight basis for application with renewable energy sources such as hydropower. On a seasonal timescale (summer to winter), storage of hydrogen in liquid organic hydrides was equivalent to other carbon free alternatives and superior to zero emission systems like batteries.Seasonal energy storage is illustrated by the methylcyclohexane-toluene-hydrogen (MTH) system. Low cost summer electricity is used for water electrolysis to yield hydrogen for hydrogenation of toluene. Dehydrogenation in winter gives hydrogen for heat and power generation by fuel cells with an estimated overall electrical efficiency of 41%. Recent laboratory results using commercial, dehydrogenation catalysts in fixed bed reactors show how catalyst efficiency was increased (low by-products) to reduce the carbon emissions to 0.01 kgC/kWh_e. Hydrogen separation membranes and new molecular reactions are being investigated to further increase efficiencies. Economic analyses show that the seasonal storage of hydroelectric power with hydrogen by the MTH system is economically competitive with new hydropower projects.     

Hydrogen via methane decomposition: an application for decarbonization of fossil fuels

Fossil fuel decarbonization is an emerging technological approach for significant reduction of CO₂ emissions into the atmosphere. CO₂-free production of hydrogen via thermocatalytic decomposition of methane (natural gas) as a viable decarbonization strategy is discussed in this paper. The technical approach is based on a single-step decomposition (pyrolysis) of methane and other hydrocarbons over carbon-based catalysts in an air/water free environment. This approach eliminates the need for water–gas shift and CO₂ removal stages, required by conventional processes (e.g. methane steam reforming), which significantly simplifies the process. Clean carbon is produced as a valuable byproduct of the process. The experimental data on the catalytic activity of different carbon-based catalysts in methane decomposition reaction are presented in this work. The paper also discusses various conceptual designs for the reactor suitable for decomposition of methane with production of hydrogen-rich gas and continuous withdrawal of elemental carbon.     

Comparison of different system layouts to generate a substitute of natural gas from biomass and electrolytic hydrogen

The production of electrolytic hydrogen is considered among the best solution to mitigate the grid instability problems which arise from the widespread distribution of renewable energy sources, such as wind and solar. However, hydrogen is not easy to stock and distribute. Possible solutions are represented by its direct injection into the existing pipeline for natural gas distribution or its utilisation for the production of a substitute of natural gas. In this last case, which follows the so called approach of “power to gas”, a source of carbon is required. Preferably the carbon should come from biomass, since it can be considered “renewable carbon”.Starting from this idea, this study analyses two different approaches, depending on the grid power demand. In a first layout, biomass is gasified with electrolytic hydrogen to generate directly a methane rich syngas. After water condensation, the syngas is fed to a methanation process to convert almost completely carbon in methane.In the second layouts the biomass is gasified with electrolytic oxygen and the syngas is fed, together with other electrolytic oxygen, to a power unit, such as an internal combustion engine, a gas turbine or a high temperature fuel cells (SOFC). The exhaust gas from these power units is composed almost exclusively by carbon dioxide and water vapour. After water condensation, the carbon dioxide is fed together electrolytic hydrogen to a methanation process to obtain the substitute of natural gas.An overall best efficiency of roughly 74% is obtained when the plant is not connected to the grid. On the contrary, when electricity can be absorbed by the grid, best efficiency of 59.4% is reached utilising, as power unit, a SOFC fed at 6 bars.In all cases the input is low value energy (biomass and unstable electric power) and the output is high value energy constituted by a substitute of natural gas and stable electric power.