共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
3.
介绍了九华山庄二期地埋管地源热泵系统的设计、施工、调试以及跟踪测试的情况。阐述了选择复合式系统的理由,指出测试土壤热工参数以及进行地下温度模拟的必要性和确保地下热平衡的重要性。分析了地埋管地源热泵系统的测试结果。 相似文献
4.
以上海某工程为例,通过自主研发的测试装置,采用恒热流法分别对DN32单U形及DN25双U形竖直地埋管试验孔进行了热响应测试,得到了单位管长换热量及岩土的热物性参数,其中双U形管单位管长换热量比单U形管高约20%;双U形管导热系数比单U形管高约15%.建议在选择地埋管形式时应综合考虑场地地质条件、埋管单位管长换热量、管材及钻井难易等因素. 相似文献
5.
6.
武汉中华奇石馆地源热泵空调系统设计 总被引:1,自引:0,他引:1
介绍了该工程场地的热物性测试、地埋管换热器和空调系统的设计及地埋管换热器的施工,并就地埋管换热器设计和施工的关键技术问题进行了分析和探讨. 相似文献
7.
8.
岩土的综合导热系数是地埋管换热器准确设计的重要参数之一,获得岩土综合导热系数较为广泛的方法是现场岩土热响应测试。阐述了热响应试验的理论基础,介绍了热响应试验的两种方法,并对影响热响应试验结果的因素进行了分析。结果表明,测试时间、岩土初始温度及流体进口温度都会影响热响应测试结果的精度,因此,在进行热响应实验时,首先要保证足够长的测试时间,同时,要测试出准确的岩土初始温度。在测试过程中,要控制热响应测试系统地埋管进口处的温度和进出口温差,使其在热泵机组名义工况范围内。 相似文献
9.
10.
地埋管地源热泵系统的热平衡 总被引:6,自引:2,他引:4
分析了地埋管地源热泵热平衡问题的由来与影响,提出了解决该问题的技术思路,并结合实际项目的测试分析,讨论了对解决该问题有利的系统设计原则和运行模式。 相似文献
11.
12.
13.
介绍了作者自主设计的垂直埋管型土壤源热泵系统实验平台,针对夏热冬暖地区,浅层土壤含水量大且渗流速度快等特性,对浅埋土壤换热器的换热性能,不同的流量、埋管长度、埋管形式等对系统的影响,系统的节能效果等进行了研究。研究证明了在夏热冬暖地区,应用小型地源热泵制冷采暖系统,其采暖工况和制冷工况下系统能效比均可达到3.3左右,而机组能效比在采暖工况下可达3.9,在制冷工况下可达3.4。相比于普通空调,其采暖效果非常好,制冷能效也很高。小型地源热泵制冷采暖系统在夏热冬暖地区具有良好的适应性和节能效果。 相似文献
14.
利用热回收装置回收排风中的能量是空调系统节能的一项有力措施。首先对常见的热回收装置的原理和性能作了简要介绍,然后利用技术资料对全热和显热回收效率进行比较,论证了不同工况下排风热回收装置的节能特性。并通过实例进行经济分析,计算出投资回收期,评价了经济效果,得出了小型热回收装置适用于暖通空调系统的结论。 相似文献
15.
16.
17.
18.
In this study we explore the effects of end-use energy efficiency measures on different district heat production systems with combined heat and power (CHP) plants for base load production and heat-only boilers for peak and medium load productions. We model four minimum cost district heat production systems based on four environmental taxation scenarios, plus a reference district heat system used in Östersund, Sweden. We analyze the primary energy use and the cost of district heat production for each system. We then analyze the primary energy implications of end-use energy efficiency measures applied to a case-study apartment building, taking into account the reduced district heat demand, reduced cogenerated electricity and increased electricity use due to ventilation heat recovery. We find that district heat production cost in optimally-designed production systems is not sensitive to environmental taxation. The primary energy savings of end-use energy efficiency measures depend on the characteristics of the district heat production system and the type of end-use energy efficiency measures. Energy efficiency measures that reduce more of peak load than base load production give higher primary energy savings, because the primary energy efficiency is higher for CHP plants than for boilers. This study shows the importance of analyzing both the demand and supply sides as well as their interaction in order to minimize the primary energy use of district heated buildings. 相似文献
19.