An effective method of stress intensity factor calculation for cracks emanating from a triangular or square hole under biaxial loads

This paper is concerned with stress intensity factors for cracks emanating from a triangular or square hole under biaxial loads by means of a new boundary element method. The boundary element method consists of the constant displacement discontinuity element presented by Crouch and Starfied and the crack‐tip displacement discontinuity elements proposed by the author. In the boundary element implementation, the left or the right crack‐tip displacement discontinuity element is placed locally at the corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. The method is called a Hybrid Displacement Discontinuity Method (HDDM). Numerical examples are included to show that the method is very efficient and accurate for calculating stress intensity factors for plane elastic crack problems. In addition, the present numerical results can reveal the effect of the biaxial loads on stress intensity factors.     

Stress intensity factors for cracks emanating from a triangular or square hole in an infinite plate by boundary elements

This paper concerns stress intensity factors of cracks emanating from a triangular or square hole in an infinite plate subjected to internal pressure calculated by means of a boundary element method, which consists of constant displacement discontinuity element presented by Crouch and Starfied and crack tip displacement discontinuity elements proposed by the author. In the boundary element implementation the left or the right crack tip displacement discontinuity element is placed locally at corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. Numerical examples are included to show that the method is very efficient and accurate for calculating stress intensity factors of plane elasticity crack problems. Specifically, the numerical results of stress intensity factors of cracks emanating from a triangular or square hole in an infinite plate subjected to internal pressure are given.     

A numerical analysis of cracks emanating from a square hole in a rectangular plate under biaxial loads

This note concerns with stress intensity factors of cracks emanating from a square hole in rectangular plate under biaxial loads by means of the boundary element method which consists of the non-singular displacement discontinuity element presented by Crouch and Starfied and the crack tip displacement discontinuity elements proposed by the author. In the boundary element implementation the left or the right crack tip displacement discontinuity element is placed locally at corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundary. The present numerical results illustrate that the present approach is very effective and accurate for calculating stress intensity factors of complicated cracks in a finite plate and can reveal the effect of the biaxial load and the cracked body geometry on stress intensity factors.     

Crack tip fields in ductile crystals

Results on the asymptotic analysis of crack tip fields in elastic-plastic single crystals are presented and some preliminary results of finite element solutions for cracked solids of this type are summarized. In the cases studied, involving plane strain tensile and anti-plane shear cracks in ideally plastic f c c and b c c crystals, analyzed within conventional small displacement gradient assumptions, the asymptotic analyses reveal striking discontinuous fields at the crack tip.For the stationary crack the stress state is found to be locally uniform in each of a family of angular sectors at the crack tip, but to jump discontinuously at sector boundaries, which are also the surfaces of shear discontinuities in the displacement field. For the quasi-statically growing crack the stress state is fully continuous from one near-tip angular sector to the next, but now some of the sectors involve elastic unloading from, and reloading to, a yielded state, and shear discontinuities of the velocity field develop at sector boundaries. In an anti-plane case studied, inclusion of inertial terms for (dynamically) growing cracks restores a discontinuous stress field at the tip which moves through the material as an elastic-plastic shock wave. For high symmetry crack orientations relative to the crystal, the discontinuity surfaces are sometimes coincident with the active crystal slip planes, but as often lie perpendicular to the family of active slip planes so that the discontinuities correspond to a kinking mode of shear.The finite element studies so far attempted, simulating the ideally plastic material model in a small displacement gradient type program, appear to be consistent with the asymptotic analyses. Small scale yielding solutions confirm the expected discontinuities, within limits of mesh resolution, of displacement for a stationary crack and of velocity for quasi-static growth. Further, the discontinuities apparently extend well into the near-tip plastic zone. A finite element formulation suitable for arbitrary deformation has been used to solve for the plane strain tension of a Taylor-hardening crystal panel containing, a center crack with an initially rounded tip. This shows effects due to lattice rotation, which distinguishes the regular versus kinking shear modes of crack tip relaxation. and holds promise for exploring the mechanics of crack opening at the tip.     

Simulation of stage I-crack growth using a hybrid boundary element technique

Short fatigue crack propagation often determines the service life of cyclically loaded components and is highly influenced by microstructural features such as grain boundaries. A two-dimensional model to simulate the growth of these stage I-cracks is presented. Cracks are discretised by displacement discontinuity boundary elements and the direct boundary element method is used to mesh the grain boundaries. A superposition procedure couples these different boundary element methods to employ them in one model. Varying elastic properties of the grains are considered and their influence on short crack propagation is studied. A change in crack tip slide displacement determining short crack propagation is observed as well as an influence on the crack path.     

FEM for evaluation of weight functions for SIF, COD and higher-order coefficients with application to a typical wedge splitting specimen

In the evaluation of accurate weight functions for the coefficients of first few terms of the linear elastic crack tip fields and the crack opening displacement (COD) using the finite element method (FEM), singularities at the crack tip and the loading point need to be properly considered. The crack tip singularity can be well captured by a hybrid crack element (HCE), which directly predicts accurate coefficients of first few terms of the linear elastic crack tip fields. A penalty function technique is introduced to handle the point load. With the use of these methods numerical results of a typical wedge splitting (WS) specimen subjected to wedge forces at arbitrary locations on the crack faces are obtained. With the help of appropriate interpolation techniques, these results can be used as weight functions. The range of validity of the so-called Paris equation, which is widely used in the evaluation of the COD from the stress intensity factors (SIFs), is established.     

Boundary element analysis of three‐dimensional cracks in anisotropic solids

This paper presents a boundary element analysis of linear elastic fracture mechanics in three‐dimensional cracks of anisotropic solids. The method is a single‐domain based, thus it can model the solids with multiple interacting cracks or damage. In addition, the method can apply the fracture analysis in both bounded and unbounded anisotropic media and the stress intensity factors (SIFs) can be deduced directly from the boundary element solutions. The present boundary element formulation is based on a pair of boundary integral equations, namely, the displacement and traction boundary integral equations. While the former is collocated exclusively on the uncracked boundary, the latter is discretized only on one side of the crack surface. The displacement and/or traction are used as unknown variables on the uncracked boundary and the relative crack opening displacement (COD) (i.e. displacement discontinuity, or dislocation) is treated as a unknown quantity on the crack surface. This formulation possesses the advantages of both the traditional displacement boundary element method (BEM) and the displacement discontinuity (or dislocation) method, and thus eliminates the deficiency associated with the BEMs in modelling fracture behaviour of the solids. Special crack‐front elements are introduced to capture the crack‐tip behaviour. Numerical examples of stress intensity factors (SIFs) calculation are given for transversely isotropic orthotropic and anisotropic solids. For a penny‐shaped or a square‐shaped crack located in the plane of isotropy, the SIFs obtained with the present formulation are in very good agreement with existing closed‐form solutions and numerical results. For the crack not aligned with the plane of isotropy or in an anisotropic solid under remote pure tension, mixed mode fracture behavior occurs due to the material anisotropy and SIFs strongly depend on material anisotropy. Copyright © 2000 John Wiley & Sons, Ltd.     

Automated simulation of fatigue crack propagation for two-dimensional linear elastic fracture mechanics problems by boundary element method

In this paper, automated simulation of multiple crack fatigue propagation for two-dimensional (2D) linear elastic fracture mechanics (LEFM) problems is developed by using boundary element method (BEM). The boundary element method is the displacement discontinuity method with crack-tip elements proposed by the author. Because of an intrinsic feature of the boundary element method, a general growth problem of multiple cracks can be solved in a single-region formulation. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not necessary. Local discretization on the incremental crack extension is performed easily. Further the new adding elements and the existing elements on the existing boundaries are employed to construct easily the total structural mesh representation. Here, the mixed-mode stress intensity factors are calculated by using the formulas based on the displacement fields around crack tip. The maximum circumferential stress theory is used to predict crack stability and direction of propagation at each step. The well-known Paris’ equation is extended to multiple crack case under mixed-mode loadings. Also, the user does not need to provide a desired crack length increment at the beginning of each simulation. The numerical examples are included to illustrate the validation of the numerical approach for fatigue growth simulation of multiple cracks for 2D LEFM problems.     

Fatigue growth prediction of center slant crack in rectangular plate

This paper presents a numerical prediction model of mixed‐mode crack fatigue growth in a plane elastic plate. It involves a formulations of fatigue growth of multiple crack tips under mixed‐mode loading and a displacement discontinuity method with crack‐tip elements (a boundary element method) proposed recently by Yan is extended to analyse the fatigue growth process of multiple crack tips. Due to an intrinsic feature of the boundary element method, a general growth problem of multiple cracks can be solved in a single‐region formulation. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not necessary. Crack extension is conveniently modelled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characters of some related elements are adjusted according to the manner in which the boundary element method is implemented. As an example, the present numerical approach is used to analyse the fatigue growth of a centre slant crack in a rectangular plate. The numerical results illustrate the validation of the numerical prediction model and can reveal the effect of the geometry of the cracked plate on the fatigue growth.     

半空间中椭圆夹杂与裂纹对SH波的散射

采用Green函数、复变函数和多极坐标方法求解弹性半空间中椭圆形弹性夹杂与任意方位的裂纹对SH波的散射问题。利用“保角映射”技术求解椭圆夹杂对SH波的散射位移场,并构造适合本问题的Green函数,即含椭圆形弹性夹杂的弹性半空间内任意一点承受时间谐和的反平面荷载作用时的位移基本解,结合裂纹“切割”法构造裂纹,进而得到椭圆夹杂和裂纹同时存在条件下的位移场与应力场。最后,通过具体算例,讨论了不同参数对地表位移、弹性夹杂周边动应力集中系数和裂纹尖端动应力强度因子的影响规律。     

线弹性断裂力学问题的扩展自然单元法

为了更加有效地求解线弹性断裂问题,提出了扩展自然单元法。该方法基于单位分解的思想,在自然单元法的位移模式中加入扩展项表征不连续位移场和裂纹尖端奇异场。通过水平集方法确定裂纹面和裂纹尖端区域,并基于虚位移原理推导了平衡方程的离散线性方程。由于自然单元法的形函数满足Kronecker delta函数性质,本质边界条件易于施加。混合模式裂纹的应力强度因子由相互作用能量积分方法计算。数值算例结果表明扩展自然单元法可以方便地求解线弹性断裂力学问题。     

Comparison of the basic and the discontinuity formulation of the 3D-dual boundary element method

The dual boundary element method (Dual BEM) has established as a numerical approach for solving arbitrary 3D-crack problems in linear elastostatics. In the case of symmetrically loaded cracks — especially traction-free cracks — often the more efficient displacement discontinuity method (DDM) is used, because one obtains a reduced system of algebraic equations.

In our paper we will show that the discontinuity method is just a special formulation of the basic Dual BEM and can be applied to arbitrary boundary value problems on the crack. We will present a numerical example for an unsymmetrically loaded crack and discuss which combinations of boundary conditions on the crack surfaces lead to a reduced system of algebraic equations. The savings in memory and computing time compared to the basic formulation of the Dual BEM will be quantified and illustrated by the numerical simulation of 3D crack propagation.     

Stress field interaction and strain energy distribution between a stationary main crack and its process zone

The damage process zone developed by brittle materials in front of a macrocrack is simulated by means of a distribution of microcracks. Crack mutual interactions are taken into account by means of a numerical technique, based on a displacement discontinuity boundary element method that is able of considering both the macrocrack–microcrack and microcrack–microcrack interactions inside the process zone. In the frame of linear elastic fracture mechanics the stress field at each crack tip and the related elastic strain energy are calculated. The main features of the interaction phenomena turn out to be almost independent of the microcrack density. Some considerations both on the shielding and amplification effects on the main crack and on the strain energy distribution between cracks give explanation to experimental evidence and prove that crack interaction is not such a short-range effect as sometimes expected.     

Ⅰ型和Ⅱ型Dugdale模型解析元列式及其半解析有限元法

利用弹性平面扇形域哈密顿体系的方程,通过分离变量法及共轭辛本征函数向量展开法,推导了两个圆形奇异超级解析单元列式,这两个超级单元能够分别准确地描述Ⅰ型和Ⅱ型Dugdale模型平面裂纹尖端场。将该解析元与有限元相结合,构成半解析的有限元法,可求解任意几何形状和载荷的Ⅰ型或Ⅱ型裂纹基于Dugdale模型的裂纹尖端塑性区尺寸和裂纹尖端张开位移(CTOD)或裂纹尖端滑开位移(CTSD)的计算问题。对典型算例的计算结果表明方法简单有效,具有令人满意的精度。     

几何非线性扩展有限元法及其断裂力学应用

该文将扩展有限元方法应用到几何非线性及断裂力学问题中,并研制开发了扩展有限元Fortran程序。扩展有限元法其计算网格与不连续面相互独立,因此模拟移动的不连续面时无需对网格进行重新剖分。该文推导了几何非线性扩展有限元法的公式,在常规有限元位移模式中,基于单位分解的思想加进一个阶跃函数和二维渐近裂尖位移场,反映裂纹处位移的不连续性,并用2个水平集函数表示裂纹;采用拉格朗日描述方程建立了有限变形几何非线性扩展有限元方程;采用多点位移外推法计算裂纹应力强度因子并通过最小二乘法拟合得到更精确的结果。最后给出的大变形算例表明该文提出的几何非线性的断裂力学扩展有限元方法和相应的计算机程序是合理可行的,而且对于含裂纹及裂纹扩展的问题,扩展有限元法优于传统的有限元法。     

Boundary integral equation method for conductive cracks in two and three-dimensional transversely isotropic piezoelectric media

Using the fundamental solutions and the Somigliana identity of piezoelectric medium, the boundary integral equations are obtained for a conductive planar crack of arbitrary shape in three-dimensional transversely isotropic piezoelectric medium. The singular behaviors near the crack edge are studied by boundary integral equation approach, and the intensity factors are derived in terms of the displacement discontinuity and the electric displacement boundary value sum near the crack edge on crack faces. The boundary integral equations for two dimensional crack problems are deduced as a special case of infinite strip planar crack. Based on the analogy of the obtained boundary integral equations and those for cracks in conventional isotropic elastic material and for contact problem of half-space under the action of a rigid punch, an analysis method is proposed. As an example, the solution to conductive Griffith crack is derived.     

Delamination analysis of composites by new orthotropic bimaterial extended finite element method

The extended finite element method (XFEM) is further improved for fracture analysis of composite laminates containing interlaminar delaminations. New set of bimaterial orthotropic enrichment functions are developed and utilized in XFEM analysis of linear‐elastic fracture mechanics of layered composites. Interlaminar crack‐tip enrichment functions are derived from analytical asymptotic displacement fields around a traction‐free interfacial crack. Also, heaviside and weak discontinuity enrichment functions are utilized in modeling discontinuous fields across interface cracks and bimaterial weak discontinuities, respectively. In this procedure, elements containing a crack‐tip or strong/weak discontinuities are not required to conform to those geometries. In addition, the same mesh can be used to analyze different interlaminar cracks or delamination propagation. The domain interaction integral approach is also adopted in order to numerically evaluate the mixed‐mode stress intensity factors. A number of benchmark tests are simulated to assess the performance of the proposed approach and the results are compared with available reference results. Copyright © 2011 John Wiley & Sons, Ltd.     

Cracks emanating from a square hole in rectangular plate in tension

A numerical analysis of cracks emanating from a square hole in a rectangular plate in tension is performed using a hybrid displacement discontinuity method (a boundary element method). Detailed solutions of the stress intensity factors (SIFs) of the plane elastic crack problem are given, which can reveal the effect of geometric parameters of the cracked body on the SIFs. By comparing the calculated SIFs of the plane elastic crack problem with those of the centre crack in a rectangular plate in tension, in addition, an amplifying effect of the square hole on the SIFs is found. The numerical results reported here also prove that the boundary element method is simple, yet accurate, for calculating the SIFs of complex crack problems in finite plate.