The synthesis and structural study of two benzothiazolyl azo dyes: X-ray crystallographic and computational study of azo–hydrazone tautomerism

The synthesis, FT-IR, ¹H and ¹³C NMR characterisation, as well as crystal and molecular structure determined by single-crystal X-ray diffraction data, of two azo dyes derived from 6-aminobenzothiazole: 6-[(4-N,N-dimethylaminophenyl)diazenyl]benzothiazole and 6-[(2-hydroxy-1-naphthyl)diazenyl]benzothiazole are reported. Both dyes are essentially planar with the exclusion of methyl groups in 6-[(4-N,N-dimethylaminophenyl)diazenyl]benzothiazole, which exibits 100% E-configuration in terms of orientation of the substituents about the central azo linkage. Single-crystal X-ray study of 6-[(2-hydroxy-1-naphthyl)diazenyl]benzothiazole was undertaken to established whether the hydrazone or azo tautomer was present in the solid state as well as any potential shift in tautomeric equilibrium imparted by temperature variation (296 and 100 K). Density functional theory calculations revealed that the hydrazone tautomer was more stable than the azo tautomer and that the tautomeric equilibrium was shifted towards the hydrazone form at lower temperature.     

Experimental and numerical study of distortion in flat,L‐shaped,and U‐shaped carbon fiber–epoxy composite parts

In this study, flat composite panels were fabricated to find the effect of different manufacturing parameters, including stacking sequence, part thickness, and tooling material, on distortion of carbon fiber‐epoxy composite parts. L‐shaped and U‐shaped panels were also made to investigate the effect of stacking sequence on spring‐in angle and warpage of the curved panels. Results showed that distortion of the flat panels caused by asymmetry in the stacking sequence was an order of magnitude greater than distortion of the panels with an unbalanced stacking sequence; whereas in the curved panels, the panel with an asymmetric stacking sequence showed the least spring‐in angle, and the largest angle was observed in the symmetric panel. MSC Marc was used to predict distortion of the panels, and the simulation results were compared with the experimental results for several stacking sequences of the flat and the L‐shaped panels. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40439.     

Spectral characterisation and computational studies of some novel phenylazoindol‐2‐one dyes

A series of novel phenylazo disperse dyes were prepared by coupling selected diazotised 3‐ or 4‐anilines with indol‐2‐one. The structures of the synthesised dyes were determined by spectroscopic and analytical methods. Solvent effects on the ultraviolet–visible absorption spectra of these novel dyes were studied. The colour of the dyes was evaluated with respect to the substituent therein. Acid and base effects on the visible absorption maxima of the dyes were also reported. The tautomerism of 3‐(phenyldiazenyl)indol‐2‐one was modelled by density functional theory at the B3LYP level. The ultraviolet–visible absorption spectra for the tautomers were reproduced with the time‐dependent density functional theory and semi‐empirical Zerner’s intermediate neglect of differential overlap/spectroscopic (ZINDO/S) method. The predominance of the keto–hydrazone tautomer was confirmed experimentally and theoretically.     

Pan‐milling mixing – a novel approach to forming polymer blends and controlling their morphology

A novel technique (pan‐milling mixing) was developed to control the morphology and thus enhance the mechanical properties of polypropylene/polyamide 6 (PP/PA6) systems. Through pan‐milling at ambient temperature, PP/PA6 pellets of particle size 2–4 mm can be effectively pulverized to well‐mixed micrometre fine powders in the solid state. During pan‐milling of mixtures of PP and PA6, the polymer molecules undergo chain scission and form copolymers that compatibilize the two polymers in situ. By press moulding the finely mixed PP/PA6 powder obtained at a temperature between the melting points of PA6 and PP (for example 200 °C), a blend can be obtained in which the PA6 powder, retained throughout the process in the solid state, is well dispersed in the PP matrix. The mechanical properties of the system are much better than that of PP/PA6 blends prepared by common twin screw extrusion mixing and injection moulding. Tensile strengths of the fine PA6 particle filled PP/PA6 (70/30) blend is 29.3 MPa, which is 6.1 MPa higher than that of a conventionally prepared PP/PA6 blend. The Izod notched impact strength of a fine PA6 particle‐filled PP/PA6 (70/30) blend is 6.34 kJ m^?2, which is 1.72 kJ m^?2 higher than that of a conventionally prepared PP/PA6 blend. Morphological analysis shows that the domain size of PA6 in the system is much smaller than that of the PP/PA6 blend, and can be controlled by the processing conditions such as temperature. © 2001 Society of Chemical Industry     

Novel V‐shaped negative temperature coefficient of conductivity thermistors and electromagnetic interference shielding effectiveness from butyl rubber–loaded boron carbide ceramic composites

The presentation of a new conductive composite with good effective applications like negative and positive temperature coefficient of conductivity thermistors (i.e., V‐shaped thermistors) and electromagnetic interference shielding effectiveness (EMI) was the aim of this study. The effect of boron carbide (B₄C) contents on the vulcanization characteristics and network structure of butyl rubber (IIR) composites were analyzed in detail. The prediction of the type of crosslinks based on the affine and phantom network theory was also analyzed. The influence of the volume fraction of B₄C on the dc conductivity and thermoelectric power was investigated. The electrical and dielectric properties of IIR composites were investigated. The results suggest that the conduction occurs by a tunneling mechanism and behaves as a p‐type semiconductor. Isothermal resistance at different temperatures, as a function of B₄C content, was displayed. The current–voltage characteristics showed properties of switches, which were explained by coulombic repulsive force. For practical applications, as self‐electrical heating the temperature–time cycles were investigated under certain applied power. It was found that increasing the B₄C content increases the thermal stability of the composite. However, the theoretical modeling of the current–voltage characteristic is very useful for planning groups in industrial applications of conducting polymer composites. Furthermore, the endurance test under applied power indicates that the proposed composites could be useful as temperature sensors with good reliability. Specific heat as a function of B₄C contents was evaluated by experimental and various energy balance models. Furthermore, the temperature dependency of thermal conductivity and thermal diffusivity were investigated. Finally, the standing wave ratio, reflection coefficient, return loss, and attenuation of IIR/B₄C composites were studied in the 1‐ to 4‐GHz frequency range. The resulting values of electromagnetic interference shielding effectiveness were compared with theoretical models. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:2756–2770, 2004     

Preparation,structure, and properties of end‐functionalized miktoarms star‐shaped polybutadiene–sn–poly(styrene–butadiene) rubber

Two miktoarm star‐shaped rubbers with large‐volume functional groups of 1,1‐diphenylhexyl at the ends of arms (DMS–PB–SBR) and one miktoarm star‐shaped rubber with n‐butyl groups at the ends of arms (BMS–PB–SBR) were prepared by 1,1‐diphenylhexyllithium (DPHLi) and n‐butyl lithium as initiators, respectively. The molecular structures and morphological properties of the three rubbers (MS–PB–SBR) were studied and compared with those acquired from the blend consisting of star‐shaped solution‐polymerized butadiene styrene rubber (S‐SSBR) and butadiene rubber (PBR) prepared by ourselves. The results showed that MS–PB–SBR exhibited a more uniform distribution of PBR phase and a smaller phase size of PBR than that of S‐SSBR/PBR blend. It is found that MS–PB–SBR composites filled with CB showed the lower Payne effect than that of S‐SSBR/PBR/CB composite, suggesting that the MS–PB–SBR/CB composite (particularly the DMS–PB–SBR/CB composites) would possess excellent mechanical properties, high wet‐skid resistance, and low rolling resistance. For the studied MS–PB–SBR systems, the contribution of large‐volume functional groups at the end of PBR molecular chains to decrease the rolling resistance was larger than that of Sn coupling effect. It is envisioned that the miktoarm star‐shaped rubbers with 1,1‐diphenylhexyl groups at the molecular ends would be useful for making treads of green tires. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40002.     

Experimental and computational analysis of thermo‐oxidative‐structural stability of ZrB2–SiC–Ti during arc‐jet testing

The development of new ultra‐high temperature ceramics for thermal protection system (TPS) of hypersonic cruise and re‐entry vehicles requires performance‐qualification testing under simulated flight conditions. The present work, encompassing experiments and computational analysis, critically analyzes the thermo‐oxidative‐structural stability of flat surface disks of spark plasma sintered ZrB₂–18SiC–xTi composites (x=0, 10, 20; composition in wt%) under arc jet flow with heat flux of 2.5 MW/m² for 30 seconds. Such testing conditions effectively simulate the aero‐thermal environment in ground facility, as experienced by hypersonic vehicles. Based on the extensive XRD, SEM‐EDS and electron probe microanalyzer based analysis of the surface/sub‐surface of arc jet exposed ceramics, the oxidation mechanisms are qualitatively discussed. Importantly, thick oxide layers (~400‐950 μm) were found to be adherent, thereby providing good structural stability of such ceramics for reusable TPS. The careful finite element (FE) analysis with high quality structural elements, being generated using HyperMesh, was conducted to understand the underlying reasons for observed oxidation. Such analysis allows us to determine the temporal evolution of through‐thickness temperature distribution. FE‐based calculations were subsequently validated using experimentally measured backwall temperatures. The thermodynamic feasibility of competing oxidation reactions at the analytically computed front wall temperatures was thereafter realistically assessed to support the oxidation mechanisms. Taken together, the present work provides guidelines for better understanding of the thermo‐oxidative‐structural stability of ceramics under arc jet testing and also establishes the good stability of ZrB₂–18SiC–20Ti composites for potential application in TPS of hypersonic space vehicles.     

Structural,spectroscopic and computational study of 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones

Ten 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones were studied (five new compounds) to provide insight into the electronic effects of diverse substituents located at different positions in their phenyl moieties. The structural features of these dyes were examined by combining experimental and theoretical approaches. The crystal structures of two derivatives were revealed by X‐ray crystallography and diverse packing modes owing to different intermolecular interactions (π–π stacking and lone pair–π interactions, as well as hydrogen bonds) were found. A study on lattice energy and energy related to the molecular pairs obtained from their crystal packing was performed. The tautomerism and ionisation of the dyes in ethanol or N,N ‐dimethylformamide solution were rationalised in terms of diazo component substitution pattern.     

Synthesis and characterization of a novel liquid crystalline star‐shaped polymer based on α‐CD core via ATRP

Well‐defined side‐chain liquid crystalline star‐shaped polymers were synthesized with a combination of the “core‐first” method and atom transfer radical polymerization (ATRP). Firstly, the functionalized macroinitiator based on the α‐Cyclodextrins (α‐CD) bearing functional bromide groups was synthesized, confirmed by ¹H‐NMR, MALDI‐TOF, and FTIR analysis. Secondly, the side‐chain liquid crystalline arms poly[6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate] (PMMAzo) were prepared by ATRP. The characterization of the star polymers were performed with ¹H‐NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). It was found that the liquid crystalline behavior of the star polymer α‐CD‐PMMAzo_n was similar to that of the linear homopolymer. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased as the molecular weight increased for most of these samples. All star‐shaped polymers show photoresponsive isomerization under the irradiation with Ultraviolet light. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,characterization and crosslinking of functional star‐shaped poly(ε‐caprolactone)

Star‐shaped low molecular weight poly(ε‐caprolactone)s (PCLs) were synthesized and functionalized with crosslinkable terminal groups for subsequent crosslinking. The ε‐caprolactone (CL) prepolymers were polymerized by ring‐opening in the presence of polyglycerine (PGL) as an initiator (1, 3 and 5 mol%) and Sn(II)2‐ethylhexanoate as a catalyst. Characterization of the prepolymer by ¹³C/¹H nuclear magnetic resonance (NMR) spectroscopy, size exclusion chromatography (SEC), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) revealed a six‐armed star‐shaped structure for the prepolymer with the molecular weight controlled by the ratio of PGL and CL. Functionalization of the hydroxyl‐terminated prepolymer was carried out with maleic or itaconic anhydride. In both cases, the characterization of the functionalized prepolymer showed that the hydroxyl groups were completely substituted. The functionalized PCLs were successfully crosslinked through the reaction of double bonds. The crosslinking was induced either thermally with organic peroxide or photochemically with a photosensitive initiator. Characterization of the crosslinked PCLs by Soxhlet extraction, DSC and FTIR showed that the itaconic double bond was much more reactive in thermal crosslinking than the maleic double bond. Thus, the crosslinked prepolymers that were functionalized with itaconic double bonds achieved a gel content of about 90%. A gel content of 100% was achieved with several compositions where crosslinking agents were employed. © 2002 Society of Chemical Industry     

Synthesis of V‐MCM‐41 Catalysts and Their Application in CO2‐Assisted Isobutane Dehydrogenation

A series of V‐MCM‐41 were in situ synthesized. The textual properties and vanadium species were systematically characterized. The results showed that the catalysts could still maintain a mesoporous structure and high specific surface area. The vanadium species were highly dispersed on the surface, with the coexistence of polymeric vanadium species. Isobutane dehydrogenation was performed by employing CO₂ as a soft oxidant. The results revealed an almost linear relationship between the activity and surface vanadium sites. Isolated vanadium species were more active for isobutane dehydrogenation. The isobutane dehydrogenation reaction in the presence of CO₂ could proceed simultaneously through oxidative dehydrogenation and non‐oxidative dehydrogenation followed by the reverse water gas shift reaction.     

Star‐shaped POSS–methacrylate copolymers with phenyl–triazole as terminal groups,synthesis, and the pyrolysis analysis

Star‐shaped polyhedral oligomeric silsesquioxane (POSS)–methacrylate hybrid copolymers with phenyl–triazole as terminal groups had been designed and synthesized via sequential atom transfer radical polymerization (ATRP), azidation, and phenylacetylene‐terminated procedures, and the hybrid copolymers here could be denoted as POSS–(PXMA‐Pytl)₈, where X can be M, B, L, and S, represented four different methacrylate monomers, such as methacrylate (MMA), butyl methacrylate (BMA), lauryl methacrylate (LMA), and stearyl methacrylate (SMA), respectively. Thermal gravimetric analysis (TGA) and in situ Fourier transform infrared spectroscopy (FTIR) were applied for studying the thermal stability and degradation mechanism, and it was found that all of the POSS–(PXMA‐Cl)₈ and POSS–(PXMA‐Pytl)₈ copolymers exhibited excellent thermal stabilities, which had great potential in heat‐resistant material application. Different tendencies of decomposition temperatures at 5% and 10% weight loss (T₅ and T₁₀) dependent on the side‐chain length and terminal group species were investigated respectively. The longer alkyl side chains of the monomers, the lower thermal stabilities, and enhanced T₅ and T₁₀ were also shown with the introduction of phenyl–triazole groups instead of chlorine groups. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40652.     

Synthesis of chitosan‐graft‐poly[2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate] copolymer from a novel monomer,prepared using a Morita–Baylis–Hillman reaction,and characterization of its antimicrobial activity

A novel method has been developed to modify the natural polymer chitosan. The process utilizes a monomer prepared by employing a Morita–Baylis–Hillman (MBH) reaction. Specifically, the vinyl monomer 2‐[hydroxy(pyridin‐3‐yl)methyl]acrylonitrile (HPA) was synthesized using a high‐yielding MBH reaction of acrylonitrile with pyridine‐3‐carboxaldehyde in the presence of 1,4‐diazabicyclo[2.2.2]octane. Conversion of HPA to 2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate (CPA) was then carried out by reaction of acryloyl chloride. The highly functionalized monomer CPA was grafted onto chitosan through a reaction in 2% acetic acid containing a persulfate and a sulfite (K₂S₂O₈/Na₂SO₃) as redox promoter. An optimal grafting percentage of 123% is obtained when the grafting process is conducted at 60 °C for 4 h employing a 1:0.5 ratio of K₂S₂O₈ and Na₂SO₃ at a concentration of 2.5 × 10^?3 mol L^?1. Chitosan‐graft‐poly[2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate] graft copolymers, having various grafting percentages, were characterized using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopies, X‐ray diffraction, thermogravimetric analysis and scanning electron microscopy. Finally, the results of studies probing the antimicrobial activities of the polymers against selected microorganisms show that the graft copolymers display higher growth inhibition activities against bacteria and fungi than does chitosan. © 2014 Society of Chemical Industry     

Synthesis,spectral, thermal,and chelation potentials of polymeric hydrazone based on 2,4‐dihydroxy benzophenone

A chelating polymer, poly(2,4‐dihydroxy benzophenone hydrazone–formaldehyde) [poly(DHBPH–F)], was synthesized by the polycondensation of 2,4‐dihydroxy benzophenone hydrazone with formaldehyde in the presence of oxalic acid as a catalyst. Poly(DHBPH–F) was characterized by Fourier transform infrared and ¹H‐NMR spectral data. The molecular weight of the polymer was determined by gel permeation chromatography. Polychelates were obtained when the dimethylformamide solution of the polymer containing a few drops of ammonia was treated with an aqueous solution of metal ions. Elemental analysis of the polychelates indicated that the metal–ligand ratio was 1 : 2. The IR spectra of the polymer–metal complexes suggested that the metals were coordinated through the oxygen of the phenolic? OH group and the nitrogen of the azomethine group. The electron paramagnetic resonance and magnetic moment data indicated a square planar configuration for Cu(II) chelate and an octahedral structure for Ni(II) chelate. The thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction data indicated that the incorporation of the metal ions significantly enhanced the degree of crystallinity. The polymerization initiation, electrical conductivity, and catalytic activity of the polychelates are discussed. Heavy‐metal ions [viz., Cu(II) and Ni(II)] were removed with this formaldehyde resin, and the metal‐ion uptake efficiency at different pH's, the nature and concentration of the electrolyte, and the reusability of the resin were also studied. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,Structure–Activity,and Structure–Stability Relationships of 2‐Substituted‐N‐(4‐oxo‐3‐oxetanyl) N‐Acylethanolamine Acid Amidase (NAAA) Inhibitors

N‐Acylethanolamine acid amidase (NAAA) is a cysteine amidase that preferentially hydrolyzes saturated or monounsaturated fatty acid ethanolamides (FAEs), such as palmitoylethanolamide (PEA) and oleoylethanolamide (OEA), which are endogenous agonists of nuclear peroxisome proliferator‐activated receptor‐α (PPAR‐α). Compounds that feature an α‐amino‐β‐lactone ring have been identified as potent and selective NAAA inhibitors and have been shown to exert marked anti‐inflammatory effects that are mediated through FAE‐dependent activation of PPAR‐α. We synthesized and tested a series of racemic, diastereomerically pure β‐substituted α‐amino‐β‐lactones, as either carbamate or amide derivatives, investigating the structure–activity and structure–stability relationships (SAR and SSR) following changes in β‐substituent size, relative stereochemistry at the α‐ and β‐positions, and α‐amino functionality. Substituted carbamate derivatives emerged as more active and stable than amide analogues, with the cis configuration being generally preferred for stability. Increased steric bulk at the β‐position negatively affected NAAA inhibitory potency, while improving both chemical and plasma stability.     

Synthesis,characterization, and thermal degradation of novel poly(2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate)

A novel methacrylate monomer containing benzofuran side group, 2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate (BOEMA), was synthesized from esterification reaction of 2‐bromo‐1‐(5‐bromo benzofuran‐2‐yl) ethanone with sodium methacrylate at 85°C in the presence of 1,4‐dioxane solvent. After characterization with Fourier transform infrared spectrophotometer, nuclear magnetic resonance (¹H‐NMR and ¹³C‐NMR), its homopolymerization was carried out by free radical polymerization at 60°C in the presence of benzoyl peroxide initiator and 1,4‐dioxane solvent. The glass transition temperature (T_g) of the synthesized novel polymer, poly(2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate) [poly(BOEMA)], was determined to be 137°C with differential scanning calorimetry technique. Thermal degradation kinetics of poly(BOEMA) was investigated by thermogravimetric analysis method at different heating rates with 5°C/min intervals between measurements. From dynamic measurements, the analysis of each process mechanism of Coats–Redfern and Van Krevelen methods showed that the most probable model for the decomposition process of poly(BOEMA) homopolymer agrees with the random nucleation, F₁ mechanism. The apparent decomposition activation energies of poly(BOEMA) by Kissinger's and Flynn–Wall–Ozawa methods in the studied conversion range were 188.47 and 180.13 kJ/mol, respectively. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Preparation of new dendrimer‐like star‐shaped amphiphilic poly(ethylene glycol)–poly(ϵ‐caprolactone) copolymers for biocompatible and high‐efficiency curcumin delivery

Novel amphiphilic star‐shaped terpolymers comprised of hydrophobic poly(?‐caprolactone), pH‐sensitive polyaminoester block and hydrophilic poly(ethylene glycol) (M_n = 1100, 2000 g mol^?1) were synthesized using symmetric pentaerythritol as the core initiator for ring‐opening polymerization (ROP) reaction of ?‐caprolactone functionalized with amino ester dendrimer structure at all chain ends. Subsequently, a second ROP reaction was performed by means of four‐arm star‐shaped poly(?‐caprolactone) macromer with eight ‐OH end groups as the macro‐initiator followed by the attachment of a poly(ethylene glycol) block at the end of each chain via a macromolecular coupling reaction. The molecular structures were verified using Fourier transform infrared and ¹H NMR spectroscopies and gel permeation chromatography. The terpolymers easily formed core–shell structural nanoparticles as micelles in aqueous solution which enhanced drug solubility. The hydrodynamic diameter of these agglomerates was found to be 91–104 nm, as measured using dynamic light scattering. The hydrophobic anticancer drug curcumin was loaded effectively into the polymeric micelles. The drug‐loaded nanoparticles were characterized for drug loading content, encapsulation efficiency, drug–polymer interaction and in vitro drug release profiles. Drug release studies showed an initial burst followed by a sustained release of the entrapped drug over a period of 7days at pH = 7.4 and 5.5. The release behaviours from the obtained drug‐loaded nanoparticles indicated that the rate of drug release could be effectively controlled by pH value. Altogether, these results demonstrate that the designed nanoparticles have great potential as hydrophobic drug delivery carriers for cancer therapy. © 2015 Society of Chemical Industry     

Synthesis of novel phosphorous‐containing biphenol, 2‐(5, 5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐1,4‐benzenediol and its application as flame‐retardant in epoxy resin

A novel phosphorous‐containing biphenol, 2‐(5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐ 1,4‐benzenediol (DPODB), was prepared by the addition reaction between 5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorinane phosphonate (DPODP) and p‐benzoquinone (BQ). The compound (DPODB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) for electronic application. The structure of DPODB was confirmed by FTIR and NMR spectra. Thermal properties of cured epoxy resin were studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was tested by UL‐94 vertical test and achieved UL‐94 vertical tests of V‐0 grade (nonflammable). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3842–3847, 2006     

Cyclohexa‐3,5‐diene‐1,2‐trans‐diols – Synthesis and Application in Target‐Oriented Syntheses

An exhaustive overview of the field of cyclohexa‐3,5‐diene‐1,2‐trans‐diols is given. Early and recent methods for the formation of the compounds are reviewed and the various syntheses in which the title compounds have been applied are presented. Special emphasis is given to naturally occurring epoxides, which have been the dominant target molecules since the 1970s. Finally, recent advances in biotechnology are highlighted; with the increased availability of the enantiomerically pure cyclohexa‐3,5‐diene‐1,2‐trans‐diols, new synthetic endeavours were initiated.