Chromatographic analysis of sucrose esters of long chain fatty acids

The procedure of the quantitative analysis of the components of sucrose ester products is described. By thin-layer chromatography, sucrose ester products have been separated into their components: mono-,di-,tri-, and higher esters. The individual components have been extracted from the plate and determined colorimetrically by using anthrone reagent. Standard substances of monoesters, diesters and triesters, which have been synthesized from gas-chromatographically pure methyl esters of fatty acids, have been isolated by column chromatography and identified by elemental analysis, colorimetric determination and N.M.R. determination.     

Preparation of glycol derivatives of partially hydrogenated soybean oil fatty acids and their potential as lubricants

Glycol diesters and mixtures of mono- and diesters have been prepared from methyl esters of partially hydrogenated soybean oil fatty acids and diethylene, dipropylene, neopentyl and triethylene glycols. The catalyst used in these reactions was a mixture of calcium acetate/barium acetate (3∶1, w/w). The reactions were carried out under nitrogen with 0.5% catalyst at temperatures in the range of 190–275°C. Borated esters of mixed mono- and diesters were prepared with 0.33 equivalent of boric acid per 1.0 equivalent hydroxyl group on the ester. Refractive indices, viscosities, and flash and fire points were determined for diesters, mixed mono- and diesters, and mixed diesters and borated esters. The viscosities, flash points and fire points indicate that these esters can be used as a component of lubricating oils. Wear-prevention characteristics of mixed diesters and borated esters indicated that they can be used as antifriction additives in lubricating oils. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists' Society in Toronto, May 10, 1992.     

Characterization of skin-surface lipids from the monkey (Macaca fascicularis)

Skin-surface lipids from the monkeyMacaca fascicularis are composed of sterol esters (38%), cholesterol (4%) and two types of wax diesters, identified as Type II (IIa and IIb, 17% and 40%, respectively). Type IIa contained diesters of 1,2-alkanediols esterified with two molecules of long-chain (C₁₄−C₃₄) fatty acids having straight and branched chains. In the diesters IIa, fatty acids shorter than C₁₉ predominated in position 1, and fatty acids longer than C₂₀ predominated in position 2. Type IIb contained diesters of 1,2-alkanediols esterified with C₄ and C₅ branched-chain fatty acids (predominantly isovaleric acid) at position 1 and long-chain (C₁₄−C₂₇) acids, having straight and branched chains, at position 2. The shortchain acids were converted to 2-nitrophenylhydrazides and analyzed by high-performance liquid chromatography (HPLC). Ammonia chemical ionization (CI)-gas chromatography (GC)-mass spectrometry (MS) resolved the intact diesters IIb into 12 peaks corresponding to molecular weights ranging from 597 to 748, and showed that the molecular species, such as C₂₁−C₁₆−C₅ (diol, fatty acid in position 2, fatty acid in position 1), C₂₂−C₁₆−C₅ and C₂₃−C₁₆−C₅, were prevalent. The fatty acids from both diesters were mostly (>98%) saturated. The 1,2-alkanediols from both diesters consisted of C₁₆−C₂₆ saturated straight- and branched-chain components. The acyl groups of sterol esters contained 86% C₁₄−C₃₄ branched-chain acids. The unsaturated fatty acids (5.4%) belonged to a straight-chain monoenoic series having extremely long chains (C₁₈−C₃₄). The branched-chain structures in the fatty acids and diols were iso and anteiso. These results show the species-specific profile for the skin-surface lipid synthesis.     

Comparative study of the molecular species of chloropropanediol diesters and triacylglycerols in milk fat

In an effort to establish the origin of the fatty acid esters of 3-chloropropanediol, which recently have been isolated in small amounts from goat milk, we compared the molecular species composition of the chlorohydrin diesters and of goat milk triacylglycerols. The chloropropanediol diesters were found to be composed of molecular species containing C₁₀−C₁₈ fatty acids and corresponded closely in carbon number to those calculated for the long chain sn-1,2-diacyl-glycerol moieties of goat milk triacylglycerols. The molecular species of goat milk total triacylglycerols contained C₄−C₁₈ fatty acids. It is suggested that triacylglycerols and chloropropanediol diesters are derived from the same pool of long chain fatty acids. A molecular distillate of bovine milk fat did not contain chloropropanediol diesters, while the available samples of human milk fat were shown to contain alkyldiacylglycerols as the major components of a neutral lipid fraction corresponding in polarity to the chloropropanediol diesters.     

Skin surface lipids of the dog

The skin surface lipid of the dog has been reported to contain a high proportion of diol diesters having a lower mobility on thin layer chromatography than diesters from other species in spite of containing similar fatty acid and diol components. In the present study, dog skin surface lipid was separated by preparative thin layer chromatography into sterol esters (42%), wax diesters (32%), free sterols (9%), polar lipids (7%), and unidentified components (10%). The diesters contained 1,2-diols, each esterified with one long chain fatty acid and one isovaleric acid moiety. The diols were principally branched chain C₂₁ and C₂₂ compounds while the long chain fatty acids esterified with them were mainly C₂₀ and C₂₁ branched compounds. The fatty acids from the sterol esters were mostly saturated, branched chain C₁₉ to C₂₃, together with 7% of straight chain monoenoic acids, principally C₂₁ and C₂₂. There were only trace amounts of free sterols other than cholesterol, while the esterified sterols contained 96% cholesterol and 4% lathosterol.     

High performance liquid chromatographic separation of sucrose fatty acid esters

The synthesis of sucrose fatty acid esters always results in complex mixtures. Two procedures for quantitative analysis of sucrose monoesters, respectively sucrose diesters, by means of high performance liquid chromatography on reversed-phase columns, are described. A mixture of methanol and water (85:15, v/v) was used for the separation of the monoesters, while methanol, ethyl acetate and water (65:25:10, v/v/v) was used for the separation of diesters. These methods gave information about the amount of monoesters and diesters in the product; the ratio between sucrose monopalmitate and sucrose monostearate, and the number of the most important structure isomers. A complete separation of all the possible diester products seemed to be impossible, due to the presence of more complex structure isomers. The described procedures can give important support during preparative work on sucrose fatty acid esters and also in the evaluation of these products for application purposes.     

Fatty acids of the alkane diol diesters of vernix caseosa

The fatty acid monoenes esterified to the alkane diol diesters of vernix caseosa lipid form two patterns of homologues starting from either C₁₆Δ9 or C₁₆Δ6 and adding (or subtracting) an integral number of C₂ units at the carboxyl group. Although components of the Δ6 pattern are the predominant monoenes of sebaceous gland ester lipid classes, for these diol diesters Δ9 pattern components are preferentially used.     

Synthesis and characterization of some long-chain diesters with branched or bulky moieties

Several novel fatty diesters with bulky moieties were synthesized by esterification of mono- or bifunctional fatty acids or with mono- or bifunctional alcohols using p-toluenesulfonic acid as catalyst. They were characterized by ¹H and ¹³C nuclear magnetic resonance as well as positive chemical ionization (PCl) mass spectrometry. The PCl mass spectra of the resulting diol diesters and diacid diesters are discussed and compared. The compounds were investigated as potential additives for improving the cold flow properties of vegetable oil esters used as biodiesel. Retired.     

Synthesis and characterization of mono- and heterodinuclear complexes with dicompartmental macrocyclic ligand containing hexa- and pentadentate coordination sites

A novel macrobicyclic heterobinuclear Zn(II)–Ni(II) complex with a phenol based dicompartmental ligand possessing contiguous hexa- (N₄O₂) and pentadentate (N₃O₂) coordination sites was prepared by a stepwise method. The prepared mono- and bimetallic macrocyclic complexes were characterized by elemental analysis, IR, NMR spectroscopies, and molar conductance measurements. Characterization results confirms the expected C₂ symmetric geometry for mononuclear macrocyclic zinc complex. The ¹H NMR spectrum and X-ray crystal structure of the macrocyclic Zn(II)–Ni(II) complex demonstrated a C₁ symmetric geometry with a five-membered heterocycle ring attached to the diethylenetriamine link as a result of an intramolecular rearrangement. The explanation for these topological transformation and intramolecular rearrangement as well as electrochemical behavior of dinuclear complex are discussed.     

α-sulfonated fatty acid esters: II. Solution behavior of α-sulfonated fatty acid polyethylene glycol esters

Sodium α-sulfonated, fatty acid polyethylene glycol monoesters [C _m H_2m+1CH(SO₃Na)COO(C₂H₄O) _n H] and diesters [C _m H_2m+1CH(SO₃Na)COO(C₂H₄O) _n COCH(SO₃Na)C _m H_2m+1], wherem=10–16 andn=1–35, were prepared by esterification of α-sulfonated, fatty acids with polyethylene glycols, followed by neutralization with NaOH. Crude products were purified by reversed-phase column chromatography on an octadecyl-modified silica gel. Characteristic solution behavior of these α-sulfonated fatty acid esters was, examined, and the following features were observed. All monoesters prepared in this work had Krafft points below 0°C and also possessed good calcium stabilities. Critical micelle concentrations of the monoesters increased monotonously, as a rule, with an increase in the number of oxyethylene units. These results suggest that the polyethylene glycol residue of the monoester behaves as a hydrophile. On the other hand, diesters possessed high water solubility, low foamability, and critical micelle concentrations that were lower by a factor of ten compared to those of the monoesters.     

Lipase-Catalyzed Synthesis of d-Psicose Fatty Acid Diesters and their Emulsification Activities

The diesterification of d-psicose (the C-3 epimer of d-fructose) with fatty acid vinyl esters of selected acyl chain lengths (C₈, C₁₀, and C₁₂) was successfully carried out using Candida antarctica lipase (Novozym 435) at 45 °C for 24 h to give the 1,6-diacyl-d-psicofuranoses with a high regioselectivity in good yields (83–90%). These diesters of d-psicose have hydrophilic-lipophilic balance (HLB) values (6.5–8.2) similar to HLB values of monoglyceride compounds which constitute the largest single type of emulsifiers employed by the food industry. Ability of the d-psicose diesters to stabilize oil-in-water emulsions and the weight-averaged oil-droplet diameter in the emulsions was evaluated in this study. Emulsion stability of oil droplets stabilized by d-psicose dicaprylate (0.3%, w/v in oil phase) was comparable to d-fructose dicaprylate (0.2%, w/v). It was further confirmed that the d-psicose diesters exhibited an emulsification activity depending on the chain length of fatty acid; d-psicose dicaprate showed better emulsion stability than the other diesters.     

Preparation and characterization of mono- and hetero-dinuclear complexes with a dicompartmental macrocyclic ligand containing hexa- and penta-coordination sites

A novel hetero-dinucleating macrocyclic Zn(II)–Ni(II) complex was prepared by a stepwise procedure. The prepared mono- and dinuclear macrocyclic complexes were characterized by elemental analysis, IR, NMR spectroscopies, and molar conductance measurements. Characterization results confirm the expected C₂ symmetry geometry for mononuclear macrocyclic zinc complex with trans disposed pyridyl ligands. In contrast, the X-ray crystal structure of the dinuclear macrocyclic Zn(II)–Ni(II) complex reveals a C₁ symmetry geometry so that, Zn(II) ion is located in six-coordination site with cis disposed pyridyl ligands and the penta-dentate compartment is occupied by Ni(II) ion in a square pyramidal geometry. The thermogravimetric analysis (DTA/TG) of binuclear complex is also investigated.     

Preparation and surfactant properties of diglycerol esters of fatty acids

Fatty acid mono- and diesters of diglycerol constitute the major portion of commercial polyglycerol esters; hence, their composition influences the performance of the latter as emulsifiers. The correlation of structure of the fatty acids in the mono- and diesters with surfactant properties is of interest. Linear diglycerol was isolated from polymerized glycerol by acetonation, fractional distillation and regeneration. Diglycerol mono- and diesters of undecenoic, lauric, stearic, oleic and ricinoleic acids were prepared by reacting diglycerol and fatty acids in a refluxing mixture of acetonitrile-tetrahydrofuran (75:25) in the presence of p-toluenesulfonic acid and molecular sieves. Mono- and diesters were separated by silica gel column chromatography, and their purities were ascertained by thin layer chromatography and determination of saponification value. The structures were confirmed by periodic acid oxidation, chemical-ionization mass spectrometry and 13 C-NMR spectroscopy. Surfactant properties of the esters were determined. Monoesters showed higher ability in surface tension reduction, emulsification and foaming than the diesters. Short-chain fatty acid esters showed better surfactant properties than the long-chain fatty acid esters. The presence of a central double bond in the lipophilic part of the monoesters reduced emulsion stability. The presence of a hydroxy group in acyl chain retarded foaming and surface tension reducing power.     

Diester waxes in surface lipids of animal skin

The literature is surveyed on two types of diester lipid that occur on the skin surfaces of animals: Type 1, a hydroxy fatty acid of which the hydroxyl group and the carboxyl group are esterified respectively with another fatty acid and a fatty alcohol, and Type 2, and alkane α,β-diol of which each OH group is esterified with a fatty acid. New data presented here show that the cow, rabbit and cat produce Type 1, whereas the dog, mouse, guinea pig and baboon produce Type 2 diesters. Each occurs as a major component of the surface lipid. The homologue distribution is given for Type 1 diesters of cow, rabbit and cat as well as the Type 2 diesters of dog and mouse. Distribution of long chain fatty acids of Type 1 diesters parallels that of the fatty alcohols suggesting a biogenetic relation between the two types of compounds. GLC of total diesters for the cow suggests that the components are assembled randomly during biosynthesis. Molecular weight of these diesters are in the range of those of natural triglycerides composed mainly of C₁₆ and C₁₈ fatty acids. Presented at the 60th AOCS Annual Meeting, San Francisco, April 1969, as part of a Symposium on Natural Waxes.     

The Di- and triesters of the lipids of steer and human meibomian glands

Three groups of diesters have been isolated and identified in the lipids of steer meibomian glands. The first group, designated as α Type I, with the abbreviated formula FA-αOHFA-FA1c, consisted of α-hydroxy fatty acids esterified to fatty acids and fatty alcohols in the approximate molar ratio 1∶1∶1. The second group, designated as ω Type I-St, with the abbreviated formula FA-ωOHF A-St, consisted of ω-hydroxy fatty acids esterified to fatty acids and sterols in the approximate molar ratio 1∶1∶1. The third group, designated as α,ω Type II, with the abbreviated formula FA-α,ωdiol-FA, consisted of α,ω-diols esterified to 2 moles of fatty acids. The sum of the different diesters comprised about 9% of total steer meibomian lipids. Capillary GLC of the fatty acids of αType I diesters showed the fatty acids to be a family with a two-cluster profile, one at C₁₂ to C₂₀ and the other at C₂₁ to C₃₁, with anteiso chains predominating. Fatty acids from ωType I-St and α,ωType II diesters gave mainly a one-cluster profile in the short long chain, C₂₃ to C₃₀, with anteiso chains predominating, while the α-hydroxy fatty acids were short chain C₁₃ to C₁₈ acids with C₁₆ predominating. The sterols in diesters ωType I-St were cholesterol (∼60%), Δ7 cholestenol (∼35%) and an unidentified compound (∼5%) with a GLC retention time slightly longer than Δ7 cholestenol on SE-30 phase. The ω-hydroxy fatty acids and α,ω-diols both were of exceedingly long chain lengths, C₂₉−C₃₈, and showed similar GLC profiles. Two types of triesters comprising approximately 1% of total steer meibomian lipids have been isolated but incompletely characterized. In terms of molar ratios, one group of triesters gave fatty acids:ω-hydroxy fatty acids:α-hydroxy fatty acids:sterols + fatty alcohols as approximately 1∶1∶1∶1. The other contained fatty acids, α-hydroxy fatty acids and α,ω-diols in what appears to be a complex mixture of several triesters. Diesters ωType I and α,ωType II also were found in human meibum. Hitherto these two diesters have not been found in any animal tissue.     

Surface activity of sucrose palmitates

Interfacial tension data are presented for cotton-seed oil-water and paraffin oil-water systems containing purified sucrose palmitates of different degrees of acylation. Both the monopalmitates and diplamitates effectively reduced interfacial tension. To be effective, the monoesters had to be dissolved in water, the diesters in oil. Although nearly inactive alone, sucrose tripalmitate was active in mixtures with the mono-and dipalmitates. Efficiencies of the sucrose palmitates were also excellent. In general, mixtures of sucrose palmitates were as effective as the most active component. When dissolved in water, the efficiency of sucrose palmitate mixtures was proportional to the monoester content, but when dissolved in oil mono-, di-, and triesters contributed to the efficiency.     

Supramolecular Chromatographic Separation of C60 and C70 Fullerenes: Flash Column Chromatography vs. High Pressure Liquid Chromatography

A silica-bound C-butylpyrogallol[4]arene chromatographic stationary phase was prepared and characterised by thermogravimetric analysis, scanning electron microscopy, NMR and mass spectrometry. The chromatographic performance was investigated by using C₆₀ and C₇₀ fullerenes in reverse phase mode via flash column and high-pressure liquid chromatography (HPLC). The resulting new stationary phase was observed to demonstrate size-selective molecular recognition as postulated from our in-silico studies. The silica-bound C-butylpyrogallol[4]arene flash and HPLC stationary phases were able to separate a C₆₀- and C₇₀-fullerene mixture more effectively than an RP-C₁₈ stationary phase. The presence of toluene in the mobile phase plays a significant role in achieving symmetrical peaks in flash column chromatography.     

Age dependent structural changes in the diol esters of uropygial glands of chicken

The chain lengths and diastereoisomer composition of alkane-2, 3-diol diesters of the uropygial glands of chicken changed significantly as the birds became physiologically mature. The C₂₄ diol decreased, and C₂₂ and C₂₃ diols increased. Threo isomer content of the diols decreased. In the acyl portion, the shorter (C₁₂−C₁₅) acids decreased, and the longer (C₁₇−C₂₀) acids increased. Scientific paper 4168, Project 2001, Agricultural Research Center, College of Agriculture, Washington State University, Pullman, Wash.     

Optimization of electrochemical properties of LiFePO4/C prepared by an aqueous solution method using sucrose

LiFePO₄ can be used as a positive electrode material for lithium-ion batteries by making composite with electrical conductive carbonaceous materials. In this study, LiFePO₄/C (carbon) composite was prepared by a soft chemistry route, in which sucrose was used as a carbon source of a low price. We tried to optimize a Li/(LiFePO₄/C) cell performance through changing synthetic conditions and discussed the factors affecting the electrochemical performances of the cell, such as the amount of the carbon source, synthetic temperature, gas flow rate of pyrolysis and the formation of secondary phases. It was found that the connection of the residual carbon and Fe₂P to LiFePO₄ particles and the amount of these two phases were important factors. In our experimental conditions, LiFePO₄/C including 9.72 wt.% of residual carbon, prepared at 800 °C for 12 h showed the highest reversible capacity and the best C rate performance among the synthesized materials; 130 mAh g⁻¹ at 10C rate and 50 °C.     

Mechanistic investigation and selectivity of the grafting onto C60 of macroradicals prepared by cobalt-mediated radical polymerization

The grafting mechanism of poly(vinyl acetate) macroradicals prepared by cobalt-mediated radical polymerization onto C₆₀ is investigated. The experimental conditions directly impact the nature and stability of the PVAc/C₆₀ adducts. In the presence of residual initiating radicals that can compete with PVAc° macroradicals for addition onto C₆₀, mixtures of PVAc/C₆₀ adducts having between one and eight polymer chains per C₆₀ are formed. PVAc/C₆₀ adducts prepared with low [PVAc]:[C₆₀] ratios may contain weak C₆₀–C₆₀ bonds that further dissociate and account for the instability of the products. The formation of such dimers can be lessened by increasing the temperature from 30 °C to 100 °C. The temperature increase also allows a complete dissociation of the PVAc-Co dormant species into PVAc° macroradicals and an almost quantitative grafting of eight PVAc chains onto C₆₀, leading to well-defined C₆₀(PVAc)₈ octa-adducts. These results might shed new light on the grafting onto C₆₀ of macroradicals prepared by other CRP techniques.