Origin of the cluster-size effect in the hydrogenation of cinnamaldehyde over supported Au catalysts

Gold nanoclusters supported on γ-Al₂O₃ were more active and selective than platinum nanoclusters in the high-pressure liquid-phase hydrogenation of cinnamaldehyde to cinnamylalcohol, while in the hydrogenation of cyclohexene gold was less active than platinum. The differences in catalytic performance are ascribed to the weaker interaction of gold with the reactants and products compared to platinum. Gold clusters with a diameter below 2 nm are essential to obtain a high activity and selectivity in the hydrogenation of cinnamaldehyde. The size dependence of the selectivity originates from the stronger dependence of the CO hydrogenation rate on cluster size compared to the CC hydrogenation rate. Small clusters exhibit an enhanced π backbonding, which favors CO adsorption over CC adsorption.     

Nonlinear optical properties in tetrametallic Fe3Mn complexes with pseudo-C3 symmetry

New type of 3D chromophores [{CpFeC₅H₄CRCH4-py}₃Mn(CO)₃]BF₄ (1) with weakly interaction subchromophore were synthesized and found to display improved nonlinearity compared with their 1D reference systems [(CpFeC₅H₄CRCH4-py)Mn(CO)₅]BF₄ (2).     

Synthesis and reactivity of an 2-azabutadiene-based π-conjugated dithioether: Formation of a N,S-ligated molybdenum chelate complex and C,N,S-pincer complexes of palladium and platinum

Nucleophilic attack of sodium isopropylthiolate on 4,4-dichloro-1,1-diphenyl-2-azabuta-1,3-diene [Cl₂CC(H)–NCPh₂}] (1) affords the 2-azabutadiene derivative [(i-PrS)₂CC(H)–NCPh₂] (2). Upon irradiation of Mo(CO)₆ in THF in the presence of 2, the chelate complex cis-[(OC)₄Mo{(i-PrS)₂CC(H)–NCPh₂}] (3) is obtained. Coordination on Mo occurs through the imine nitrogen and a thioether group. Polydentate dithioether 2 acts as N,C,S-pincer ligand after orthometallation reaction with Pd(II) or Pt(II). The molecular structures of 2 and (C,N,S)-[(i-PrS)₂CC(H)–NC(Ph)C₆H₄)PtCl] (4b) have been determined by X-ray diffraction studies.     

Preparation and characterization of carboximidate iron(II) complexes

The reactions of C₅H₄NCHNNHC(O)Ph (1) with Fe(II) chloride gave [Fe₂(C₅H₄NC(OEt)NNHC(O)Ph)₂(μ-OEt)₂Cl₂]) (2) in ethanol and [Fe₂(C₅H₄NC(OMe)NNHC(O)Ph)₂(μ-OMe)₂Cl₂] (3) in methanol as well as [Fe(C₅H₄NCHNNHC(O)Ph)Cl₂] (4) in tetrahydrofuran, respectively. The X-ray diffraction analysis reveals their structures and complex 4 is proposed as an intermediate of formation of complexes 2 and 3.     

Unsymmetrical cyrhetrenyl and ferrocenyl azines derived from 5-nitrofurane: Synthesis,structural characterization and electrochemistry

A new series of unsymmetrical cyrhetrenyl and ferrocenyl azines that were monosubstituted [(η⁵-C₅H₄)–C(R)N–NCH(5-NO₂–2-C₄H₂O)]M {with MRe(CO)₃ and RH (1a) or RMe (1b); MFe(η⁵-C₅H₅) and RH (2a) or RMe (2b)} and disubstituted [Fe{(η⁵-C₅H₄)–C(Me)N–NCH(5-NO₂–2-C₄H₂O)}₂] (3a) were prepared by condensation reactions of the corresponding organometallic hydrazone [(η⁵-C₅H₄)–C(R)N–NH₂)]M with 5-nitro-2-furaldehyde. The ¹H and ¹³C{¹H} NMR spectra indicated that these compounds adopted an (E,E)-configuration about the ˃CN − bond and an s-trans conformation about the N1–N2 bond, and this result was confirmed by X-ray crystallographic analyses of 1a and 2b. The opposite electronic effects of the organometallic fragments correlate with the co-planarity of the [(η⁵-C₅H₄)–C(R)N–NCH(5-NO₂–2-C₄H₂O)] system, the reduction potential of the nitro group (E_1/2) and the chemical shifts of the iminic carbons.     

Pt nanoparticles deposited over carbon nanotubes for selective hydrogenation of cinnamaldehyde

Two kinds of carbon nanotubes (CNTs) with different inner diameter (less than 10 nm: CNTs-1 and between 60 and 100 nm: CNTs-2) were used as catalyst supports. The platinum particles were simply deposited on the outside surface (CNTs-1) and inside (CNTs-2) and were easily reduced to Pt⁰ by refluxing. The catalysts exhibit high activities in the selective hydrogenation of cinnamaldehyde which contains both CC and CO bonds. But the selectivity of these two catalysts was quite different under same reaction conditions. The high selective hydrogenation of CO bond was observed over catalyst 3%Pt/CNTs-2, while the completely hydrogenation of both CC and CO bonds was found over catalyst 3%Pt/CNTs-1.     

Thiourea-catalyzed dearomatizing [4+2] cycloadditions of 3-nitroindole

We have developed two efficient thiourea promoted dearomatizing processes involving the cycloadditions of 3-nitroindoles. The C2C3 double bond of the heteroarene can be involved as electron-poor 2π dienophile in [4+2] cycloadditions. While the uncatalyzed process requires harsh conditions, the organocatalyzed reaction takes place at room temperature and atmospheric pressure. The C2C3NO motif of the heteroarene can also react as an electron-poor 4π heterodiene in [4+2] / [3+2] cycloadditions cascades, under high pressure. In contrast to Lewis acid activation, thiourea promotion thus proves efficient even under unconventional activation conditions and in the presence of acid sensitive reactants such as enol ethers.     

Preparation of high-temperature stable SiBCN fibers from tailored single source polyborosilazanes

Bulk SiBCN ceramics derived from polyborosilazanes of the type [B(C₂H₄SiRNH)₃]_n (1a, R = CH₃; 2a, R = H; C₂H₄ = CHCH₃, CH₂CH₂) exhibit an exceptional structural stability at high temperature. Therefore, such quaternary systems are of great scientific and technical interest as fibrous reinforcements intended for high-temperature applications. In this context, the design of novel polyborosilazanes, which display properties tailored for the preparation of SiBCN fibers, is studied. Boron-modified polysilazanes of the type [B(C₂H₄SiRNCH₃)₃]_n (1b, R = CH₃; 2b, R = H) are prepared via aminolysis of the tris(dichlorosilylethyl)boranes B(C₂H₄SiRCl₂)₃ (1, R = CH₃; 2, R = H). It is shown that the functionalisation of the precursors with NCH₃ units improves their processability (i.e. solubility) compared to that of their ammonolysed analogs [B(C₂H₄SiRNH)₃]_n (1a, R = CH₃; 2a, R = H). In addition to the influence of the NCH₃ units, the presence of the SiCH₃ functions in such polymers offers the best potential for the preparation of fibers by melt-spinning. As-spun fibers are then converted under controlled atmosphere into high-temperature stable SiBCN fibers according to the polymer-derived ceramic route.     

Thermally stable pseudo-third-generation Grubbs ruthenium catalysts with pyridine–phosphinimine ligand

The ligand precursors 2-(R₃PN)CH₂Py (R = Ph(1a), Cy(2a)) were prepared from reaction of pyridine azide with various phosphine ligands. Reaction of 1a or 2a with RuCl₂(CHPh)(Py)₂(H₂IMes) (Py = pyridine) afforded the ruthenium alkylidene complex RuCl₂(CHPh)(PyCH₂(NPR₃))(H₂IMes) (R = Ph(1), Cy(2)). Both catalysts showed good thermal stability and latent behavior toward RCM and ROMP reactions.     

The effect of Mg(OH)2 on furfural oxidation with H2O2

The oxidation of furfural in H₂O₂ and H₂O₂–Mg(OH)₂ system were systematically investigated and a rational explanation for the reaction mechanism was proposed. 2-formyloxyfuran, from selective oxidation of HCO group in furfural, was a crucial intermediate. The addition of Mg(OH)₂ suppressed the oxidation of furan ring of furfural and enhanced selectivities of 2(5H)-furanone (44.8%) and succinic acid (38.0%). FT-IR, Gaussian calculation and experimental results indicated that the process of furfural oxidation with H₂O₂ is homogeneous, and the synergy between dissolved Mg^2 + cations and OH⁻ ions facilitates the HOO⁻ attacking the carbon atom of HCO other than the CC bound of furan ring.     

In situ FT-IR study of thiophene adsorbed on the surface of sulfided Mo catalysts

The hydrodesulfurization (HDS) of thiophene and its derivatives by Mo-based catalysts shows significant economic benefits in crude oil processing and refining. Several Mo-based catalysts have been successfully used for HDS reaction despite of unclear catalytic mechanism. Thereby we use in situ FT-IR technique to investigate the adsorption of thiophene on the surface of supported and dispersed sulfided Mo catalysts. The results demonstrate that thiophene can be adsorbed on the catalyst surface through coordination of S atom, CC and CC with the unsaturated Mo^d+ sites located on the edge planes of MoS₂-like structures, forming four different complexes. These adsorption manners were also proved by theoretical calculation with the density functional method (DFT). The calculated binding energy of η²(S) complex is larger than other complexes, suggesting that thiophene preferred to being adsorbed on the catalyst surface through the coordination of CC with unsaturated Mo^d+ sites. The formation of coordinated complexes can decrease the aromaticity of thiophene ring and weaken CS bond, which could promote the HDS reaction.     

Synthesis and structural characterizations of organolanthanide complexes with amino-tethered guanidinate ligand (C5H5)2Ln[H2N(CH2)3NC(NHiPr) NiPr)] (Ln = Yb,Y, Er,Dy)

Reaction of N,N′-diisopropylcarbodiimide (ⁱPrNCNⁱPr) with H₂N(CH₂)₃NH₂ and (C₅H₅)₃Ln, give (C₅H₅)₂Ln[H₂N(CH₂)₃NC(NHⁱPr) NⁱPr)] in high yields, indicating that the N–H bonds of one NH₂ group readily add to the CN double bonds of carbodiimide and one cyclopentadienyl group is eliminated to construct a novel amino-tethered guanidinate anionic ligand [H₂N(CH₂)₃N C(NHⁱPr)NⁱPr)]⁻.     

Benzyne-functionalized graphene and graphite characterized by Raman spectroscopy and energy dispersive X-ray analysis

The benzyne functionalization of chemical vapor deposition grown large area graphene and graphite was performed using a mixture of o-trimethylsilylphenyl triflate and cesium fluoride that react with the carbon surface. The reaction requires at least 2 days of treatment before the appearance of Raman and energy-dispersive X-ray spectral signatures that verify modification. Raman spectra of modified graphene and graphite show a rich structure of lines corresponding to CCC, CH, and low frequency modes of surface-attached benzyne rings.     

Catalytic reactions of dioxygen with ethane and methane on platinum clusters: Mechanistic connections,site requirements,and consequences of chemisorbed oxygen

C₂H₆ reactions with O₂ only form CO₂ and H₂O on dispersed Pt clusters at 0.2–28 O₂/C₂H₆ reactant ratios and 723–913 K without detectable formation of partial oxidation products. Kinetic and isotopic data, measured under conditions of strict kinetic control, show that CH₄ and C₂H₆ reactions involve similar elementary steps and kinetic regimes. These kinetic regimes exhibit different rate equations, kinetic isotope effects and structure sensitivity, and transitions among regimes are dictated by the prevalent coverages of chemisorbed oxygen (O^*). At O₂/C₂H₆ ratios that lead to O^*-saturated surfaces, kinetically-relevant CH bond activation steps involve O^*O^* pairs and transition states with radical-like alkyls. As oxygen vacancies (¹) emerge with decreasing O₂/alkane ratios, alkyl groups at transition states are effectively stabilized by vacancy sites and CH bond activation occurs preferentially at O^** site pairs. Measured kinetic isotope effects and the catalytic consequences of Pt cluster size are consistent with a monotonic transition in the kinetically-relevant step from CH bond activation on O^*O^* site pairs, to CH bond activation on O^** site pairs, to O₂ dissociation on ^** site pairs as O^* coverage decrease for both C₂H₆ and CH₄ reactants. When CH bond activation limits rates, turnover rates increase with increasing Pt cluster size for both alkanes because coordinatively unsaturated corner and edge atoms prevalent in small clusters lead to more strongly-bound and less-reactive O^* species and lower densities of vacancy sites at nearly saturated cluster surfaces. In contrast, the highly exothermic and barrierless nature of O₂ activation steps on uncovered clusters leads to similar turnover rates on Pt clusters with 1.8–8.5 nm diameter when this step becomes kinetically-relevant at low O₂/alkane ratios. Turnover rates and the O₂/alkane ratios required for transitions among kinetic regimes differ significantly between CH₄ and C₂H₆ reactants, because of the different CH bond energies, strength of alkylO^* interactions, and O₂ consumption stoichiometries for these two molecules. Vacancies emerge at higher O₂/alkane ratios for C₂H₆ than for CH₄ reactants, because their weaker CH bonds lead to faster scavenging of O^* and to lower O^* coverages, which are set by the kinetic coupling between CH and OO activation steps. The elementary steps, kinetic regimes, and mechanistic analogies reported here for C₂H₆ and CH₄ reactions with O₂ are consistent with all rate and isotopic data, with their differences in CH bond energies and in alkyl binding, and with the catalytic consequences of surface coordination and cluster size. The rigorous mechanistic interpretation of these seemingly complex kinetic data and cluster size effects provides useful kinetic guidance for larger alkanes and other catalytic surfaces based on the thermodynamic properties of these molecules and on the effects of metal identity and surface coordination on oxygen binding and reactivity.     

Hydrodenitrogenation of Simple Aromatic Amines on Molybdena Catalysts

The hydrotreatment of some aromatic amines was studied at temperatures ranging from 400 to 450°C and P_H2=1 atm under flow conditions. Hydrogenolysis of aromatic amines involves direct cleavage of the C(sp²)N bond without saturation of the aromatic ring. The presence of hydrogen sulphide in the reaction stream has a promotional effect on the hydrogenolysis of C(sp³)N bond and an inhibitive effect on the hydrogenolysis of C(sp²)N bond. The use of a saturated hydrocarbon as diluent facilitates CN bond hydrogenolysis in the presence of hydrogen, irrespective of the carbon being sp² or sp³ hybridized.     

High efficient adsorption of gold ions onto the novel functional composite silica microspheres encapsulated by organophosphonated polystyrene

The novel functional composite silica microspheres encapsulated by organophosphonated polystyrene (SGPSNP) has been successfully synthesized. SGPSNP was employed to adsorb Au(III) from simulated wastewater, and it exhibited excellent performance, and the maximum adsorption capacity was 980.39 mg/g at 35 °C. The adsorption process optimization was performed using response surface methodology (RSM), and the analysis of variance (ANOVA) of the quadratic model demonstrated that the model was highly significant. Moreover, the regeneration capacities of SGPSNP were investigated, and it has been found that the adsorption capability remains high after several cycles of adsorption–desorption.     

Direct conversion of citrus peel waste into hydroxymethylfurfural in ionic liquid by mediation of fluorinated metal catalysts

A new green technology was developed using citrus peel waste to produce hydroxymethylfurfual (HMF). FT-IR analysis of the waste showed 4 characteristic vibration modes (CH, CO, COH, and CO/COO^?), contributing to sugars. XRD and FESEM elucidated that the waste and its hydrolysate consist of highly amorphous clusters. HCl increased HMF yield by 1.4-fold. CrF₃ increased its yield by 1.7-fold. At 0.2 of the stoichiometric ratio value, HMF yield was highest. The highest HMF yield was achieved in the reaction mixture of 4 g [OMIM]Cl, 1 mL ethyl acetate, 0.1 g CrF₃, 5 mL 0.3 M HCl, and 0.5 g biomass.     

Schiff pentadentate ligands based on an [ON2O2] core displaying structural isomerism and their coordination to dibutyltin moieties

Two tin compounds [Sn(ⁿBu)₂(Lⁿ)], where L¹{O(C₆H₄-2-NC(H)C₆H₄-2′-O)₂}^2 − and L²{O(C₆H₄-2-C(H)NC₆H₄-2′-O)₂}^2 − enclosing five electron donors in an [ON₂O₂] core, were synthesized and structurally characterized by infrared and NMR spectroscopy and by single crystal X-ray crystallographic studies at room temperature. The hepta-coordinate geometry around the Sn centers is achieved through the bonding of two monodentate n-butyl groups and the coordination of the pentadentate Lⁿ ligands, where the [ON₂O₂] core is forming a pentagonal base. The two types of oxygen atoms displayed different bonding situations around the Sn atom. DFT calculations with Gaussian 09 using PBEPBE/6-31G**/SDD level were carried out for both compounds. The topological analysis indicated that bond critical points are present along the SnO_ether direction.     

Palladium (II) and platinum (II) complexes containing organometallic thiosemicarbazone ligands: Synthesis,characterization, X-ray structures and antitubercular evaluation

A new series of palladium (II) and platinum (II) complexes containing ferrocenyl and cyrhetrenyl thiosemicarbazone ligands were synthesized and characterized. The two-step reaction of the organometallic thiosemicarbazones with i) K₂MCl₄ and ii) PPh₃ and their subsequent recrystallization from CH₂Cl₂/hexane yielded the binuclear complexes [Mˋ{ML_n(η⁵-C₅H₄)C(H)NNC(S)NHR}–(Cl)(PPh₃)] (M′Pd, Pt; ML_nRe(CO)₃, FeCp; RH, CH₃). The structures of the products were inferred from elemental analyses and IR, ¹H and ³¹P NMR spectroscopies. The molecular structures of 2b and 3d were confirmed by single crystal X-ray analysis. All complexes were screened in vitro against Mycobacterium tuberculosis and exhibited only moderate activity in the low micromolar range.