Transmission Properties of Closed Trapezoidal-Groove Guide for Millimeter Waves

The transmission characteristics of the mode TE₁₁ for a new type of closed trapezoidal-groove guide with arbitrary inclined angle are analysed in detail with the mode-matching method in this paper. The calculated results are in good agreement with the experimental values in the published reference. The dispersion of the closed trapezoidal-groove guide is very low. The relationships of the cut-off wavelength and the attenuation constant with the structural sizes of the closed trapezoidal-groove waveguide are also obtained. The given results have very important value in study, design, manufacture and application for closed trapezoidal-groove waveguide.     

ANALYSIS OF ARBITRARILY TRAPEZOIDAL-GROOVE GUIDE WITH THE CONFORMAL MAPPING METHOD

The arbitrarily open trapezoidal-groove guide is analyzed with the conformal mapping technique. A new formula is given for the evaluation of one fundamental parameter associated with the technique. The relationship between the cut-off wavelength for the dominant mode and the geometry of the guide structure is studied; dispersion characteristic of the groove guide is also given. Some numerical results are shown to be in good agreement with both experimental data and the results of the finite element method (FEM). Moreover, it is testified that dispersion of the trapezoidal-groove guide is low. The obtained results are significant for the design and application of the open trapezoidal-groove guide for millimeter waves.     

On the Dominant Mode in Closed Trapezoidal-Groove Guide by Finite Element Method

The structure of closed trapezoidal-groove guide is similiar to that of open one, but it can be used to prevent energy from leaking out of the guide. In this paper, the propagation characteristics of dominant mode in closed trapezoidal-groove guide are analysed by using finite element method and the results are discussed.     

Analysis for Transmission Properties of Arbitrarily Trapezoidal-Groove Waveguide for Millimeter Waves

In this paper, the transmission properties such as the dispersion and attenuation characteristics for the dominant mode of the trapezoidal-groove waveguide with arbitrarily inclined angle are analyzed and discussed by using the mode-matching method. Some calculated results are in very good agreement with the published data. The obtained conclusions are of important significance in theoretical studies and actual applications of trapezoidal-groove waveguides for millimeter and submillimeter waves.     

Mode Distribution and Bandwidth Characteristic of Arbitrarily Trapezoidal-Groove Guide for Millimeter Waves

The modes TE and TM of arbitrarily trapezoidal-groove guide are analyzed by using the mode-matching method. The mode TE₁₁ is the dominant mode of the trapezoidal-groove guide under different conditions. The bandwidth characteristic and the operation condition for the single dominant mode are discussed. The obtained conclusions are of very important significance in theoretical study and practical application of trapeziodal-groove guides for millimeter waves.     

On the Main Mode of Trapezoidal-Groove Guide By Finite Element Method

In this paper, the propagation properties such as the dispersion characteristics, cut-off wavelength, guide wavelength and field distribution for the main mode of trapezoidal-groove guide are analysed by using the finite element method. The dispersion is very low, and the field distribution in a trapezoidal-groove guide is similar to that of rectangular one. The results have important values in design, manufacture, and application of groove guides.     

Analysis for Transmission Characteristics of Closed Trapezoidal-Groove Waveguide with Boundary Element Method

In this paper, the cut-off and dispersion characteristics of a new kind of closed trapezoidal-groove waveguide that has more advantages than open groove waveguides are analyzed with the help of the boundary element method, the relationship between cut-off wavelengths and variations of guide's relative sizes is discussed in detail. The calculated results are in good agreement with those in the relevant reference. So, the obtained conclusions are very important in theoretical studies and actual applications of closed trapezoidal-groove waveguides for millimeter and submillimeter waves.     

Analysis for dispersion characteristics of trapezoidal-groove waveguide

In this paper, the dispersion characteristics of the main mode for the trapezoidal-groove guides are analysed by using the approach of equivalent network with transverse resonance. The relationship curves between guide wavelength, phase constant and guide dimensions, frequency are obtained. The characteristics have important values in design, manufacture and application of groove guides.     

An improved solution to the dominant mode properties of groove guides of general cross section

An improved solution to the dominant mode properties of groove guides of general cross section is presented in this paper. A novel differential equation is formulated and solved by numerical integration technique. Numerical results for single V-groove guide show good agreement with available measured values. Calculated results for the cutoff wavelengths of semicircular-groove and trapezoidal-groove guides are presented.     

Optical parameters of InP-based waveguides

The quaternary alloys InGaAsP, matched in their lattice constant to InP, are considered in view of optical-waveguide applications. The parameters, most important in this connexion, are the refractive index n and the optical absorption coefficient α. Both are calculated starting from quantities relevant to the binary constituents of the system InGaAsP. The results are compared with the relatively few experiments reported in the literature. The calculations are applied to film and rectangular waveguides, showing that they are sufficiently low in loss for integrated-optics applications.     

科技成果的转化与推广

本文简要叙述了科学技术转化为现实生产力的三个环节,即科研成果、科研成果的生产化和推广。重点总结了后两个环节在我国改革以来的进展及成功的经验,并提出存在的问题及今后工作建议。     

多注速调管技术的新进展

系统地介绍了多注速调管的工作原理、主要特点和发展概况。比较详细地分析了俄罗斯、中国和法国等国研制的多注速调管的主要性能指标和技术特点，分析了多注速调管研制中遇到的关键技术问题；讨论了多注速调管技术的发展趋势和应用范围。     

基于CDMA的无线公话的设计和实现

本文首先论述了无线公话在现代通讯中的作用和意义，对无线公话的结构分类作了介绍；较详细地阐述了分体式CDMA无线公话的功能及设计。对部分电路作了分析，并给出了系统框图和部分原理图；对相关的软件操作作了相应地说明。     

A study of microstrip array antennas with the feed network

The radiation and losses in microstrip antennas with a corporate feed network are studied. A surface current approach is applied in which the electrical currents in the feed lines are modeled as in ideal transmission lines. The free-space radiation and the surface-wave excitation of typical segments in printed feed networks are studied. A four-element array antenna with its printed feed network is analyzed and predicted radiation patterns, directivity, and gain are presented and compared with experimental results. The gain and directivity of large arrays of 16, 64, 256 and 1024 elements are calculated and measurements in the frequency range of 10 to 35 GHz are reported     

多尺度边缘检测中的有效尺度研究

在边缘检测中,检测不同类型的边缘需要的滤波尺度各不相同.本文详细讨论了以紧支、对称平滑函数构造的滤波函数在检测不同类型边缘时的有效尺度,同时分析了高斯平滑函数及三次B样条平滑函数在抑制噪声时的有效尺度范围.该文的结论为多尺度边缘检测中滤波尺度的调整提供了重要的理论依据.     

具有小中心频率比的紧凑型双频带滤波器

采用平面双模谐振器设计了一款新颖的具有小中心频率比的紧凑型双频带滤波器。该滤波器的两个工作频段的中心频率分别为5G WiFi的两个有用频段5.2 GHz和5.8 GHz,中心频率比为1:1.1。实现了具有四个传输零点的双通带响应,其中位于两个频带中间的两个传输零点由谐振器自身产生,很好地抑制了通带间的无用频段。另外两个传输零点由源负载耦合结构产生。加工并测试了该滤波器,两个通带的3 dB相对带宽为5.8%和5.2%,通带内的插入损耗小于0.8 dB,四个传输零点分别位4.52, 5.50,5.50和6.50 GHz,实验和仿真结果吻合,验证了结构的有效性。     

星载寄生式SAR系统干涉性能与空间分辨能力分析

以星载寄生式SAR系统成像信号模型为基础,详细分析了这一新系统的干涉性能和空间分辨能力,给出了 各自的限制条件。分析了两者限制的本质一致性,并统一以基线形式表示出来,同时提出了距离向有效基线和方位向有效 基线的新概念。最后以Cartwheel编队构形进行了实例分析,特别指出了基线耦合、多基线对性能的影响。     

串联叠加式固态脉冲调制器的设计

介绍了固态调制器电路常用的拓扑结构,讨论了开关直接串联与加法器叠加两种拓扑结构的特点。设计了基于IGBT的串联叠加式固态刚管脉冲调制器,调制器通过充电电源变压器实现电位隔离,采用6路调制单元串联叠加,并利用脉冲变压器升压至40 kV。重点讨论了该类型调制器研制中的关键技术,分析了脉冲变压器铁芯饱和现象并提出解决方法;讨论了吸收电路的计算选取,给出了有无吸收电路时,IGBT的C、E两端电压波形;分析并解决了脉冲波形过冲控制以及电磁干扰噪声抑制问题。     

基于PCI总线的CAN接口卡及其VxWorks环境下驱动程序的设计

本文介绍军用车辆综合电子信息系统中虚拟仪表内部的计算机上扩展的基于PCI总线的CAN接口卡及其Vx-Works环境下驱动程序的设计。硬件设计方面介绍的主要内容是：PCI9052及其与PCI总线的连接，PCI9052与SJA1000的连接，SJA1000与82C250的连接等。软件设计方面介绍的主要内容是：Vxworks环境下PCI设备的驱动设计及CAN设备的驱动设计等，并给出了主要的程序代码。测试表明，设计的CAN卡及其相关的驱动程序工作正常、可靠。文中所述内容同时能供基于PCI总线的硬件扩展及VxWorks环境下驱动程序设计时参考。     

MEMS红外光源研究及其应用

首先介绍了红外光源的类型,从波长范围、调制频率、输出功率以及制作成本等方面比较了三种不同类型红外光源的优缺点。分析了基于微机电系统(MEMS)加工技术的红外光源工作原理和类型。系统综述了MEMS红外光源的国内外研究现状,包括不同辐射层材料和不同结构的MEMS红外光源。详细描述了MEMS红外光源在红外气体传感器、目标识别装置、红外通信装置中的应用。讨论了其在结构设计和加工过程中存在的高辐射率发光材料的制作、红外光源薄膜热应力的释放以及机械强度低等技术瓶颈问题,并简单展望了MEMS红外光源的未来发展趋势。