Fluorescent chemosensor for metal ions based on optically active polybinaphthyls and 1,3,4-oxadiazole

Linear chiral polymers P-1 and P-2 were synthesized by the polymerization of (R)-5,5′-dibromo-6,6′-di(4-methylphenyl)-2,2′-bisoctoxy-1,1′-binaphthyl (R-M-1) with 2,5-di(4-vinylphenyl)-1,3,4-oxadiazole (M-2) and 2,5-di(4-tributylstannylphenyl)-1,3,4-oxadiazole (M-3) via Heck and Stille cross-coupling reaction, respectively. The chiral conjugated polymer P-1 can show strong green-blue fluorescence, and the chiral polymer P-2 shows strong blue fluorescence. While the conjugated polymers P-1 and P-2 were used as fluorescent chemosensor for metal ions, their fluorescence can be efficiently quenched on the addition of different metal ions. The obvious quenching effect of the polymers P-1 and P-2 indicates that the intramolecular photoinduced electron transfer (PET) or photoinduced charge transfer (PCT) between the polymer backbone and receptor-ions in the main chain of fluorescent chemosensor can lead to the pronounced fluorescence quenching. The results also show that the chiral polymers P-1 and P-2 incorporating 1,3,4-oxadiazole moiety as the recognition site can act as a special fluorescent chemosensor for the appropriate detection of the sensitive and selective sense of metal ions.     

Synthesis and properties of chiral helical polymers based on optically active polybinaphthyls

The chiral polymer P-1 was synthesized by the polymerization of (R)-6,6′-dibutyl-3,3′-diiodo-2,2′-bisoctoxy-1,1′-binaphthyl (R-M-1) with 5,5′-divinyl-2,2′-bipyridine (M-1)via Pd-catalyzed Heck reaction. P-2 and P-2′ were prepared by Wittig-Horner reaction of (R)-6,6′-dibutyl-2,2′-bisoctoxy-1,1′-binaphthyl-3,3′-dicarbaldehyde (R-M-2) with 5,5′-bis (diethylphosphonomethyl)-2,2′-bipyridine (M-2) in the presence of EtONa or NaH, respectively. P-3 was synthesized by Wittig-Horner reaction of (R)-6,6′-di(4-trifluoromethylphenyl)-2,2′-bisoctoxy-1,1′-binaphthyl-3,3′-dicarbaldehyde (R-M-3) with M-2 using NaH as a base. The four polymers have strong blue-green fluorescence due to the extended π-electronic structure between the chiral model compounds (R)-6,6′-dibutyl-/di(4-trifluoromethylphenyl)-2,2′-bisoctoxy-1,1′-binaphthyl (R-1 or R-2) and the conjugated linker 2,2′-bipyridyl group via vinylene bridge. Both monomers and polymers were analyzed by NMR, MS, FT-IR, UV-vis spectroscopy, DSC-TGA, fluorescence spectroscopy, GPC and circular dichroism (CD) spectroscopy. Based on the great differences of specific rotation values and CD spectra, P-1 and P-2 may adopt a zigzag chain configuration, while P-2′ and P-3 may adopt a helical configuration. The responsive optical properties of the two chiral helical polymers P-2′ and P-3 on transition metal ions were investigated by fluorescence, UV-vis and CD spectra. The results show that Ag⁺ and Ni²⁺ lead to nearly complete fluorescence quenching of P-2′ and P-3, Cu²⁺ and Fe²⁺ can cause obvious fluorescence quenching, but Zn²⁺ and Cd²⁺ can only produce slight fluorescence quenching. Ag⁺, Ni²⁺, Cu²⁺ and Fe²⁺ can also lead to the obvious changes of UV-vis spectra of P-2′ and P-3. On the contrary, Zn²⁺ and Cd²⁺ cause little changes. Most importantly, the CD intensities and wavelengths of the chiral helical polymers P-2′ and P-3 exhibit the pronounced changes upon addition of Ag⁺ and Ni²⁺.     

New amphiphilic fluorescent CBABC-type pentablock copolymers containing pyrene group by two-step atom transfer radical polymerization (ATRP) and its self-assembled aggregation

A series of novel amphiphilic fluorescent CBABC-type pentablock copolymers (Py-PMMA-PEG4600-PMMA-Py) were prepared from BAB-type amphiphilic triblock copolymer (PMMA-PEG4600-PMMA) as macroinitiator with various contents of 1-(methacryloyloxyethylamino-carboxylmethyl) pyrene (PyMOI) by atom transfer radical polymerization (ATRP) in toluene using CuBr/2,2-bipyridine as catalyst system. Triblock copolymer (PMMA-PEG4600-PMMA) was prepared by ATRP and obtained from Br-PEG4600-Br as macroinitiator with methyl methacrylate in tetrahydrofuran using the same catalyst. The molecular weights of pentablock copolymers which were reinitiated by PMMA-PEG4600-PMMA macroinitiator were calculated from ¹H NMR spectra up to 42,400 gmol⁻¹. The polydispersity of pentablock copolymers obtained from GPC analysis was narrow between 1.10 and 1.38. The crystallinity of triblock copolymer (PMMA-PEG4600-PMMA) was decreased slightly with incorporating PMMA segment. Introducing the bulky pyrene substituent into pentablock copolymer, the melting temperature was not observed and all pentablock copolymers showed amorphous patterns in wide-angle X-ray scattering (WAXS) due to decrease in the degree of crystallinity of polymer chain because of disturbing regular packing. The temperatures at 10% weight loss (Td₁₀), examined by TG analysis, showed values ranging from 265 to 323 °C in nitrogen and 264 to 313 °C in air. Fluorescence spectra of Py-PMMA-PEG4600-PMMA-Py exhibited stronger excimer emission at ca. 480 nm due to the aggregations of pyrene group formed via interaction of the hydrophobic chains. The more content of PyMOI segment in pentablock copolymers can obtain the higher emission intensity ca. 480 nm. When there were higher PyMOI contents (84.9 wt% PyMOI) in pentablock copolymers, they formed larger aggregates (210 nm) in SEM micrographs. On the other hand, while increasing the concentration of the polymer solution in THF, the morphology was changed from spherical (0.1 mg/mL) to chainlike (1.0 mg/mL) aggregates.     

A highly selective fluorescent sensor for Hg based on the water-soluble poly(p-phenyleneethynylene)

The conjugated polymer P-1 could be synthesized by the polymerization of 4,7-diethynyl-benzo[2,1,3]thiadiazole (M-1) and 1,4-bis[3′-(N,N-diethylamino)-1′-oxapropyl]-2,5-diiodobenzene (M-2) via Pd-catalyzed Sonogashira reaction. The water-soluble conjugated polyelectrolyte P-2 could be obtained by the reaction of P-1 with ethyl bromide. Both P-1 and P-2 can emit orange fluorescence. The responsive optical properties of P-1 and P-2 on Hg²⁺ were investigated by fluorescence spectra. Hg²⁺ can lead to nearly complete fluorescence quenching of P-1. On the contrary, Hg²⁺ can show the most pronounced fluorescence enhancement response of P-2 in aqueous solution without interference from those coexistent ions, such as K⁺, Mg²⁺, Pb²⁺, Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Zn²⁺. The results also exhibit that this kind of water-soluble conjugated polyelectrolyte can be used as a highly sensitive and selective fluorescence sensor for Hg²⁺ detection in water.     

Photosensitive poly(benzoxazole) based on precursor from diphenyl isophthalate and bis(o-aminophenol)

A new synthetic method for the preparation of poly(benzoxazole) (PBO) precursor, poly(o-hydroxyamide) (7) from bis(o-aminophenol) (5) and diphenyl isophthalate (6) has been developed. Polymer 7 was prepared by the polycondensation of 5 and 6 in 1-methyl-2-pyrrolidinone (NMP) at 185-205 °C. Model reactions were carried out in detail to elucidate appropriate conditions for the formation of 2-hydroxybenzanilide (3) from o-aminophenol (1) and phenyl benzoate (2). The photosensitive (PBO) precursor based on polymer 7 containing a 22% of benzoxazole unit and 30 wt% 1-{1,1-bis[4-(2-diazo-1-(2H)naphthalenone-5-sulfonyloxy)phenyl]ethyl}-4-{1-[4-(2-diazo-1(2H)naphthalenone-5-sulfonyloxy)phenyl]methylethyl}benzene (S-DNQ) showed a sensitivity of 110 mJ cm⁻² and a contrast of 5.0 when it was exposed to 436 nm light followed by developing with a 2.38 wt% aqueous tetramethylammonium hydroxide solution at room temperature. A fine positive image featuring 8 μm line and space patterns was observed on the film of the photoresist exposed to 200 mJ cm⁻² of UV-light at 436 nm by the contact mode.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Synthesis and properties of various poly(diphenylacetylenes) containing tert-amine moieties

The polymerization of diphenylacetylene derivatives possessing tert-amine moieties, such as triphenylamine, N-substituted carbazole and indole, was examined in the presence of TaCl₅-n-Bu₄Sn (1:2) catalyst. A polymer with high molecular weight (M_w = 570 × 10³) was obtained in good yield by the polymerization of diphenylamine-containing monomer 1b, whereas the isopropylphenylamine derivative (1c) gave a polymer with relatively low molecular weight (M_w = 2.4 × 10³). The polymerization of monomer 1d containing cyclohexylphenylamine group did not proceed; however, carbazolyl- and indolyl-containing monomers also produced polymers. Poly(1b), poly(2f) and poly(4b) could be fabricated into free-standing membranes by casting toluene solutions of these polymers. The gas permeability of poly(1b) was too low to be evaluated accurately whereas poly(4b) possessing two chlorine atoms in the repeating unit showed higher gas permeability than that of poly(1b); furthermore, poly(2f) having trimethylsilyl and 3-methylindolyl groups exhibited relatively high gas permeability (). In the cyclic voltammograms of diphenylamino group-containing polymers, poly(1b) and poly(2b), the intensities of oxidation and reduction peaks decreased more than those of carbazolyl-containing poly(2a). The molar absorptivity (?) of poly(1b) at ∼700 nm increased with increasing applied voltage in the UV-vis spectrum.     

New host copolymers containing pendant triphenylamine and carbazole for efficient green phosphorescent OLEDs

A series of vinyl copolymers (P1-P6) containing pendant hole-transporting triphenylamine (11-88 mol%) and carbazole chromophores were synthesized by radical copolymerization to investigate the influence of triphenylamine groups upon optoelectronic properties. The copolymers were readily soluble in common organic solvents and their weight-average molecular weights (M_ws) were between 1.41 × 10⁴ and 2.24 × 10⁴. They exhibited moderate thermal stability with T_d = 402-432 °C at 5% weight loss. The emission spectra (both PL and EL) of the blends [P1-P6 with 4 wt% Ir(ppy)₃] showed dominant green emission (517 nm) attributed to Ir(ppy)₃ due to efficient energy transfer from P1-P6 to Ir(ppy)₃. The HOMO levels of P1-P6, estimated from onset oxidation potentials in cyclic voltammeter, were −5.42 to −5.18 eV, which are much higher than −5.8 eV of conventional poly(9-vinylcarbazole) (PVK) host owing to high hole-affinity of the triphenylamine groups. The optoelectronic performances of phosphorescent EL devices, using P1-P6 as hosts and Ir(ppy)₃ as dopant (ITO/PEDOT:PSS/P1-P6:Ir(ppy)₃ (4 wt%):PBD (40 wt%)/BCP/Ca/Al), were greatly improved relative to that of PVK. The best performance was obtained with P4 device, in which the maximum luminance and luminance efficiency were 11?501 cd/m² and 10.6 cd/A, respectively.     

Synthesis and characterization of chiral polythiophenes: Poly [(R)-(−) and (S)-(+)-2-(3′-thienyl)ethyl N-(3″,5″-dinitrobenzoyl)-α-phenylglycinate]

(R)-(−) (1) and (S)-(+)-2-(3′-Thienyl)ethyl N-(3″,5″-dinitrobenzoyl)-α-phenylglycinate (2) monomers were synthesized, characterized, and polymerized in chloroform using FeCl₃ as an oxidizing agent. Molecular weights of 2.6 × 10⁴ and 3.2 × 10⁴ for poly1 and poly2, respectively, were determined by SEC analysis. FTIR spectra of the polymers indicated the coupling of monomers through the α positions. UV-vis spectra showed absorption bands at λ_max = 226 and 423 nm for poly1 and poly2, ascribed to transitions of side groups and polythiophene backbone, respectively. Poly1 and poly2 remained stable up to 210 °C. At higher temperatures, a two step weight loss degradation process was observed for both polymers by TGA analysis. ¹H NMR, in the presence of Eu(tfc)₃, and optical rotation measurements indicate the chiral properties of the monomers 1 ([α]_D²⁸ = −76.2) and 2 ([α]_D²⁸ = +76.0), and the maintenance of chirality after polymerization (poly1 [α]_D²⁸ = −29.0 and poly2 [α]_D²⁸ = +28.4, c = 2.5 in THF). According to scanning electron microscopic analysis, the polymers are highly porous.     

Ring-opening polymerization of six-membered cyclic esters catalyzed by tetrahydroborate complexes of rare earth metals

Catalytic behavior of tetrahydroborate complexes of rare earth metals, Ln(BH₄)₃(THF)_x (1: Ln = La, x = 3; 2: Ln = Pr, x = 2; 3: Ln = Nd, x = 3; 4: Ln = Sm, x = 3; 5: Ln = Y, x = 2.5; 6: Ln = Yb, x = 3), for ring-opening polymerization (ROP) of six-membered cyclic esters, δ-valerolactone (VL) and d,l-lactide (d,l-LA), was studied. The controlled polymerization of VL with 1-6 proceeded in THF at 60 °C. The catalytic activities of these complexes for the ROP of VL were observed to be in order of the ionic radii of the metals: 1(La) ≥ 2(Pr) ≥ 3(Nd) > 4(Sm) > 5(Y) > 6(Yb). The obtained polymers were demonstrated to be hydroxy-telechelic by ¹H NMR and MALDI-TOF MS spectroscopy. The controlled ROP of d,l-LA also proceeded by these complexes. The activities of these complexes for the d,l-LA ROP were also in order of the ionic radii of the metals.     

Synthesis, characterization, and high gas permeability of poly(diarylacetylene)s having fluorenyl groups

Diarylacetylenes having fluorenyl groups and other substituents (trimethylsilyl, t-butyl, bromine, fluorine) (1a-1) were polymerized with TaCl₅-n-Bu₄Sn. Monomers 1a-l produced high molecular weight polymers 2a-l (M_w 5.1 × 10⁵-1.3 × 10⁶) in 12-59% yields. All of the polymers were soluble in common organic solvents, and gave tough free-standing membranes by the solution casting method. The onset temperatures of weight loss of polymers 2a-l in air were over 400 °C, indicating considerably high thermal stability. All the polymer membranes showed high gas permeability; e.g., the oxygen permeability coefficient (PO₂) of 2a was as large as 4800 barrers. Membrane 2d possessing two fluorine atoms at meta and para positions of the phenyl ring showed the highest oxygen permeability (PO₂ = 6600 barrers) among the present polymers.     

Synthesis of polystyrene microgel with glucose as hydrophilic segment via controlled free-radical polymerization

4-Vinylbenzyl glucoside peracetate (1) was copolymerized with divinylbenzene (DVB) using 1-phenyl-1-(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)ethane (2) as an initiator in m-xylene at 138 °C for 20 h ([DVB]/[2]=28; [DVB]=0.62 mol L⁻¹). The copolymerizations were performed using the mole fraction of 1 in the total feed of 1 and DVB (F₁: [1]/[1]+[DVB]) ranging from 0.11 to 0.38 that produced the polystyrene (PSt) microgel with acetyl glucose, 3, in 46-53% yields. Dynamic laser light scattering (DLS) measurements showed that 3 was stably suspended in toluene as particles with average diameters (d's) ranging from 12 to 22 nm. A static laser light scattering (SLS) measurement gave the average molar mass, M_w,SLS, of 3 that ranged from 9.69×10⁴ to 6.96×10⁵. The numbers of the 1, 2, and DVB units in 3 (N₁, N₂, and N_DVB, respectively) were from 111 to 238, from 17 to 208, and from 350 to 4510, respectively. The deacetylation of 3 was achieved by treatment with sodium methoxide in dry 1,4-dioxane to produce the PSt microgel with glucose as the hydrophilic segment, 4. The solubilities of 4 in toluene, CHCl₃, THF, 1,4-dioxane, pyridine, DMF, DMSO, and H₂O, and the mixture of H₂O and 1,4-dioxane were examined, indicating that a hydrophilic property had been effectively introduced into 4.     

Synthesis, electroluminescence, and photovoltaic properties of dendronized poly(p-phenylene vinylene) derivatives

Two dendronized poly(p-phenylene vinylene) (PPV) derivatives, ED-PPV and BB-PPV, have been successfully synthesized according to the Gilch route. The obtained polymers possess excellent solubility in common solvents, good thermal stability with 5% weight loss temperature of more than 340 °C. The weight-average molecular weight (M_w) and polydispersity index (PDI) of ED-PPV and BB-PPV are in the range of (1.26-2.34)×10⁵ and 1.37-1.45, respectively. Polymer light-emitting diodes (PLEDs) with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al devices were fabricated, and the PLEDs emitted green-yellow light. The turn-on voltages of the PLEDs based on ED-PPV and BB-PPV were approximately 4.3, and 4.5 V, respectively. The PLED devices of ED-PPV exhibited the maximum luminance of about 157 cd/m² at 10.5 V. Photovoltaic cells with the configuration of ITO/PEDOT:PSS/polymer:C₆₀ (1:1)/Al were also fabricated, and the energy conversion efficiency of the devices based on ED-PPV and BB-PPV was measured to be 0.58, and 0.014%, respectively, under the white light at 75 mW/cm².     

Propylene polymerisations with novel heterogeneous combination metallocene catalyst systems

Propylene was polymerised with novel combination metallocene catalyst systems prepared by an emulsion-based heterogenisation method in liquid monomer conditions. The catalyst combinations investigated were rac-dimethylsilanylbis(2-methyl-4-phenyl-1-indenyl)zirconium dichloride/rac-[ethylenebis(2-(tert-butyldimethylsiloxy)indenyl)]zirconium dichloride/methylaluminoxane (MAO) (1 + 2) and rac-dimethylsilanylbis(2-methyl-4-phenyl-1-indenyl)zirconium dichloride/rac-dimethylsilanylbis(2-isopropyl-4-[3,5-dimethylphenyl]indenyl)zirconium dichloride/MAO (1 + 3). The effects of polymerisation temperature and hydrogen on catalyst performance and polymer properties, as well as copolymerisation with hexene and ethylene were investigated. Depending on the polymerisation conditions, M_w of polypropylene varied from 144 to 286 kg/mol for 1 + 2 and from 200 to 390 kg/mol for 1 + 3. Combination 1 + 2 produced broader molecular weight distribution (MWD) than 1 + 3, and a bimodal MWD with clearly separated low- and high-M_w polymer fractions was observed with 1 + 2. The two catalyst systems showed similar hydrogen and hexene responses. Each metallocene precursor showed individual response towards the polymerisation conditions, especially polymerisation temperature, suggesting that interaction between the catalyst active sites was negligible in the studied systems.     

Orange to black electrochromic behaviour in poly(2-(2-thienyl)-1H-pyrrole) thin films

We have studied an electrochromic precursor, 2-(2-thienyl)-1H-pyrrole (1), using two improved procedures of the Trofimov reaction. Optimised stereochemical calculations at the B3LYP/6-311G* level showed almost equal s-cis and s-trans conformational populations in 1 with marked out-of-plane deviations of ca. 30°. Model calculations suggest that the predominant rotational conformation in undoped poly(1) would be s-trans with the essential out-of-plane deviations around the all three interheterocyclic bonds of ca. 25-30°. Monomer 1 exhibited two irreversible oxidation processes at +0.86 and +1.3 V corresponding to the oxidation of the pyrrole and thiophene rings, respectively. Orange to black electrochromic behaviour was found in ClO₄⁻ doped poly(1) thin films with colouring and bleaching times of 1.8 and 1.3 s, respectively. The colouration efficiency during the bleaching process was 233 cm²/C. The optical contrast at 450 nm was 19% and in the near-IR was 36%. The band-gap of poly(1) (1.6-1.7 eV) was found to be significantly lower than that of polypyrrole (2.85 eV) and polythiophene (2.3 eV) as a consequence of increased electron delocalisation in the system. Important differences in the morphology of doped and dedoped poly(1) films were observed by atomic-force microscopy (AFM). Doped poly(1) films showed a granular morphology with primary particles of 45-60 nm in size and an average surface roughness of 3.5 nm. On the other hand, dedoped poly(1) films showed interconnected aggregates of 65-90 nm in size as a consequence of particle fusion, with a surface roughness of 9.2 nm. In summary, poly(1) is a promising material for emerging flexible electrochromic devices such as displays and variable optical attenuators.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Living radical polymerization of styrene mediated by a piperidinyl-N-oxyl radical having very bulky substituents

A new cyclic nitroxide 1 and the corresponding alkoxyamines 9 and 10 were synthesized and the polymerization of styrene (St) initiated with 10 was investigated. The NO-C bond of 9 is very weak, cleaving at room temperature. On the other hand, alkoxyamine 10 is stable at room temperature and the A_act and E_act for the NO-C bond homolysis were determined to be 1.4 × 10¹⁵ s⁻¹ and 124.5 kJ mol⁻¹, respectively. When the polymerization of St was carried out at 70 °C, the resultant poly(St) showed narrow polydispersities below 1.25. In the polymerization at 90 °C, the resulting poly(St) showed narrow polydispersity until 60% conversion, but M_w/M_n was rapidly increased above 60% conversion. On the other hand, the polymerization at 120 °C gave poly(St) with broad polydispersities. The unusual polymerization behavior was discussed on the basis of the SEC and ESR results.     

Structure-property relationships for a series of polyimide copolymers with sulfonated pendant groups

A series of high molecular weight, sulfonated polyimide copolymers (8a-f) with controlled acid contents have been obtained using 2,2′-bis(4-sulfobenzyloxy)benzidine (14) prepared via a flexible synthetic route. This series of novel sulfonated polyimide membranes were found to possess higher hydrolytic stability than polyimides in which the sulfonic acid groups are bound directly to the polymer main chain. An in-depth analysis of conductivity data was also performed for 8 and compared to the results for Nafion^® (1), sulfonated poly(ether ether ketone) (2) and a main-chain sulfonated polyimide (3). In order to remove the influence of acid strength, the proton mobility value for 8 at infinite dilution was calculated and found to be 1.2(±0.6) × 10⁻³ cm² s⁻¹ V⁻¹. A catalyst-coated membrane (CCM)-MEA based on a polyimide incorporating 60% sulfonated monomer (8d) was found to exhibit comparable beginning-of-life fuel cell performance as a Nafion^®-based CCM MEA at 50 °C.     

Copolymers containing pendant styryltriphenylamine and carbazole groups: Synthesis, optical, electrochemical properties and its blend with Ir(ppy)3

A series of vinyl copolymers (PVKST12-PVKST91) and homoploymer PVST containing pendant hole-transporting 4-(4-oxystyryl)triphenylamine (12-100 mol%) and carbazole chromophores were synthesized by radical copolymerization and employed as host for Ir(ppy)₃ phosphor to tune emission color. They were characterized using the ¹H NMR, FT-IR, absorption and photoluminescence spectra, elemental analysis, GPC, cyclic voltammetric and thermal analysis (DSC, TGA). Their weight-average molecular weights (M_w) and decomposition temperatures (T_d) were 1.46-5.68 × 10⁴ and 356-399 °C, respectively. The HOMO levels of PVKST12-PVKST91 and PVST, estimated from the onset oxidation potentials in cyclic voltammograms, were −5.40 to −5.14 eV, which are much higher than −5.8 eV of the conventional host poly(9-vinylcarbazole) (PVK) owing to high hole-affinity of the 4-(4-oxystyryl)triphenylamine groups. Therefore, copolymers PVKST are effective in reducing hole-injection barrier between the PEDOT:PSS and emitting layer. Electroluminescent devices [ITO/PEDOT:PSS/PVKST:Ir(ppy)₃:PBD/BCP/Ca/Al] using the hole-transporting PVKST as host were fabricated to tune the emission color. Their EL spectra showed a major emission at 515 nm and a minor peak at 435 nm attributed to Ir(ppy)₃ and 4-(4-oxystyryl)triphenylamine, respectively. The C.I.E. 1931 coordinates shift from (0.29, 0.61) for PVK to (0.33, 0.42) for PVST with an increase in 4-(4-oxystyryl)triphenylamine content.     

Optical and electroluminescent properties of polyfluorene copolymers and their blends

Light emitting properties of several polyfluorene (PF) copolymers (P1-P4) and their blends have been investigated. Light emitting diodes were fabricated with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al. The EL peak wavelengths were 421 nm (violet), 505, 513 nm (green) and 570 nm (yellow) for PF copolymers and 510, 535 nm (green) for P1/P2 and P1/P3 blends, respectively. Förster energy transfer in the photoluminescence and electroluminescence of the polymer blends P1/P2 and P1/P3 was studied. The LED using the polymer blend P1/P2 showed a turn-on voltage of 2.5 V and a brightness of 5×10⁴ cd/m² at 7 V. The highest external quantum efficiency was observed to be 3.71% at 5 V. Upon addition of 20 wt% of the green emitter P2 to the violet emitter P1, the device efficiency increased from 1.18 to 3.71%.