Kinetic models of non‐enzymatic browning in apple puree

The effects of thermal treatments on 11 °Brix apple puree were studied at temperatures from 80 to 98 °C. Colour changes (measured by reflectance spectroscopy, colour difference, L*, a* and b* and the evolution of 5‐hydroxymethylfurfural (HMF) and sugars (hexoses and sucrose) were used to evaluate non‐enzymatic browning. A kinetic model based on a two‐stage mechanism was applied to the evolution of colour difference and a*. A first‐order kinetic model was applied to L* evolution, while the evolution of absorbance at 420 nm (A₄₂₀) of the liquid fraction was described using a zero‐order kinetic model. Thermally treated samples became more reddish and suffered a slight loss of yellow hues. The effect of temperature on the kinetic constants was described by an Arrhenius‐type equation. The presence of pulp in the samples led to activation energies for A₄₂₀ and sucrose which were lower than those found previously for clarified juices with the same soluble solids content. © 2000 Society of Chemical Industry     

Study of colour and acrylamide formation in coffee,wheat flour and potato chips during heating

The effects of heating on colour generation measured as CIE colour space parameters of L* a* b* and acrylamide formation were studied in various food matrices including green coffee, wheat flour and potato chips at different temperatures. Changes in both the acrylamide concentration and the redness parameter a* during heating at relatively higher temperatures followed a typical kinetic pattern in which an initial increase to an apparent maximum followed by a subsequent decrease was observed. The similarities between the changes in acrylamide and redness parameter a* during heating revealed that colour may be a reliable indicator of acrylamide levels in thermally processed foods. The overall results suggest that both acrylamide and redness parameter a* form as intermediate products during Maillard reaction. Since an apparent decrease was observed in its level during prolonged heating at certain temperatures, prediction of acrylamide level in foods during processing should be based on realistic reaction mechanism, instead of simple linear regression model.     

Effect of air-drying temperature on physico-chemical properties,antioxidant capacity,colour and total phenolic content of red pepper (Capsicum annuum, L. var. Hungarian)

Red pepper has been recognised as an excellent source of antioxidants, being rich in ascorbic acid and other phytochemicals. Drying conditions, particularly temperature, leads to pepper modifications that can cause quality degradation. In this work, the effects of process temperatures between 50 and 90 °C on physico-chemical properties, rehydration, colour, texture, vitamin C, antioxidant capacity and total phenolics during the drying of red pepper were studied. The rehydration ratio decreased with temperature and the maximum water holding capacity was achieved at 50 °C. Both vitamin C content and the total phenolic content decreased as air-drying temperature decreased. The radical scavenging activity showed higher antioxidant activity at high temperatures (i.e. 80 and 90 °C) rather than at low temperatures (i.e. 50, 60 and 70 °C). Chromatic parameters (L*, a*, b*, C* and H°), non-enzymatic browning compounds and extractable colour were affected by drying temperature, which contributed to the discolouring of pepper during this process.     

Colour values of cooked top-round beef juices as affected by endpoint temperatures,frozen storage of cooked samples and storage of expressed juices

Juices from beef semimembranosus/adductor tissue, cooked to endpoint temperatures (EPTs) of 76, 78, 80, 82 and 84°C in a model heat-treating system, were evaluated for changes in CIELAB L*a*b*, chroma (C) and hue angle (H) values before and after storage of the cooked meat at -20°C for 3 weeks and after storage of the expressed juices under N₂ at 3°C for 72 h. Increases in EPTs altered all colour values of the juices. Lightness (L*) increased while yellowness (b*) decreased; redness (a*) and C decreased progressively while H increased toward the vertical axis. Storage of the expressed juices at 3°C under N₂ did not inhibit changes in a*, b*, C and H values. Regression coefficients of changes in relation to EPTs and time of storage of the expressed juices under N₂ were established. Storage of the cooked meats for 3 weeks at -20°C did not change any of the colour values of the juices. These data indicate that evaluations of cooked beef for doneness by colour of expressed juices must be performed immediately after expression of the juices before oxidation of the myoglobin pigments occurs. Storage of cooked meat at -20°C does not alter the colour of the juices, therefore, valid assays for doneness of meat in relation to juice colour can be made after frozen storage. © 1997 This article is a US Government work and, as such, is in the public domain in the United States of America     

Comparison of Minolta colorimeter and machine vision system in measuring colour of irradiated Atlantic salmon

BACKGROUND: Minolta and machine vision are two different instrumental techniques used for measuring the colour of muscle food products. Between these two techniques, machine vision has many advantages, such as its ability to determine L*, a*, b* values for each pixel of a sample's image and to analyse the entire surface of a food regardless of surface uniformity and colour variation. The objective of this study was to measure the colour of irradiated Atlantic salmon fillets using a hand‐held Minolta colorimeter and a machine vision system and to compare their performance. RESULTS: The L*, a*, b* values of Atlantic salmon fillets subjected to different electron beam doses (0, 1, 1.5, 2 and 3 kGy) were measured using a Minolta CR‐200 Chroma Meter and a machine vision system. For both Minolta and machine vision the L* value increased and the a* and b* values decreased with increasing irradiation dose. However, the machine vision system showed significantly higher readings for L*, a*, b* values than the Minolta colorimeter. Because of this difference, colours that were actually measured by the two instruments were illustrated for visual comparison. Minolta readings resulted in a purplish colour based on average L*, a*, b* values, while machine vision readings resulted in an orange colour, which was expected for Atlantic salmon fillets. CONCLUSION: The Minolta colorimeter and the machine vision system were very close in reading the standard red plate with known L*, a*, b* values. Hence some caution is recommended in reporting colour values measured by Minolta, even when the ‘reference’ tiles are measured correctly. The reason for this discrepancy in colour readings for salmon is not known and needs further investigation. Copyright © 2009 Society of Chemical Industry     

Kinetic modelling of non-enzymatic browning of apple juice concentrates differing in water activity under isothermal and dynamic heating conditions

The kinetics of non-enzymatic browning in apple juice concentrates were investigated. The effect of a_w (in the range of 0.74–0.99) and/or reactant concentration on brown pigment formation was monitored under isothermal heat treatment at four temperatures (60, 70, 80 and 90 °C) in apple juice solutions having either the same or different concentrations of reactant solutes. The extent of the Maillard reaction was evaluated by spectrophotometric measurements at 420 nm (A₄₂₀). The absorbance–time curves were fitted to five different kinetic models (zero and first order, weibull, logistic and the parabolic model) and estimates of browning rate constants and other model parameters were obtained. Regression analysis revealed that the logistic model was the most appropriate for describing browning in apple juice. The initial reactant concentration, but not water activity, had a significant effect on the colour change of apple juice. The processing temperature also had a strong impact on browning kinetics. Secondary models, expressing the dependence of the best fitted primary model parameters on temperature and a_w, were further developed and validated by comparing the predicted model parameters with the values observed in independent isothermal experiments. Finally, the derived model was further evaluated against the observed browning responses of apple juice under dynamic heating conditions, underlining the applicability of the developed model as a practical prediction tool for the study of non-enzymatic browning.     

Colour Changes in Brandy Spirits Induced by Light-Emitting Diode Irradiation and Different Temperature Levels

One aged brandy was subjected to an artificial visible light source from light-emitting diodes (2?×?10³ lx) and under dark conditions. The temperature was also controlled at 25, 35, and 45 °C (±2 °C); the samples were monitored for colour changes; and selected chemical parameters were at 0, 10, 20, 30, and 40 days. Colorimetric indices, CIELab parameters and spectra were also determined with UV–Vis spectrometry. Visible light modified the colour of brandy and an important colour decrease was observed, showing maximum values (ΔE _ab*) at 25 °C, under the studied experimental conditions. On the contrary, at higher temperatures, significant colour degradation was not revealed. Non-colour parameters were not significantly affected by both irradiation and storage temperatures (p?>?0.05). Kinetic parameters including rate constant and activation energy were calculated. Based on Arrhenius model, activation energies of a*, browning index and h _ab* at darkness were 12.2, 55.1, and 21.6 kJ mol^?1 respectively.     

Effects of dietary humate supplementation to broilers on performance,slaughter, carcass and meat colour

BACKGROUND: This experiment was designed to examine the effect of dietary humate supplementation primarily on pH and colour parameters of carcasses, breast fillets and drumsticks and, secondarily on performance and carcass characteristics in broilers. RESULTS: A total of 240 male broiler chicks (Ross‐308) were randomly allocated to four dietary treatments varying in supplemental humate level (0, 0.1, 0.2 and 0.3% for H₀, H₁, H₂ and H₃). Dietary humate supplementation did not affect performance traits and slaughter, hot carcass weights and yields. Carcass‐related variables (pH, L*, a*, b*, H* and C*) were responsive to the dietary treatments. The L*, a*, b*, and C* values for drumstick muscles were higher than those for breast muscles. Except for the L* value, meat colour parameters changed due to packaging. The a* value was higher and b* value was lower for vacuum packaged breast and drumsticks than for those aerobic packaged. Storage period affected colour parameters; while L*, b*, H* and C* values were higher for drumstick skin than for drumstick meat; the a* value was greater in drumstick meat than in skin. CONCLUSION: pH and colour parameters of carcasses, breast fillets and drumsticks of broilers were improved by dietary humate supplementation. However, responses of broiler performance and slaughter and carcass characteristics were minimal. Copyright © 2008 Society of Chemical Industry     

Kinetic Model for Colour Changes in Bananas During the Appearance of Chilling Injury Symptoms

The impact of chilling injury (CI) on the colour of bananas at different ripening stages was investigated. Bananas were stored at 6 and 13?°C for 2?days to induce CI symptoms. Images of the bananas were acquired in 1-h time intervals during the subsequent appearance of CI at room temperature using RGB imaging system to monitor the colour changes. The raw RGB values obtained were transformed to normalized rgb and CIEL*a*b* space to remove the brightness from the colour and to distinguish the colour similar to human perception. The total colour difference (?E) was calculated from CIEL*a*b* space to evaluate the overall colour difference of the samples. Hue (H) values were obtained after transformation into HSI space, since it provides reasonable data on the chlorophyll content as it was shown in many studies on fresh fruit. Visual assessment was carried out to grade the degree of injury and to correlate with colour parameters. Spectroscopy in the visible wavelength range, in diffuse reflectance geometry was applied to assess colour changes caused by variation in the fruit chlorophyll content. Results indicate significant (P?<?0.0001) influence of temperature, ripening stage and post-chilling time on colour parameters. Strong correlations (R ²?>?0.9) were found between r, g and H colour parameters and visual assessment. The values of r increased while the g and H decreased. The kinetic of r, g and H development after chilling treatment fitted well to the first-order kinetic model. Based on the kinetic rate constant, banana at ripening stage 5 showed enhanced susceptibility to chilling injury when compared to banana at ripening stage 4. Spectral reflectance revealed that diminishing chlorophyll content as well as tissue browning and changes in the carotenoids need to be considered when monitoring the CI symptoms. Application of principal components analysis providing clear separation of control and stressed samples capturing variances of 80.91% and 7.24% (r), 82.96% and 7.52% (g), 91.57% and 3.15% (b) and 79.83% and 7.91% (H) for components PC1 and PC2, respectively.     

Kinetics of colour development in aqueous fructose systems at high temperatures

Non‐enzymatic browning was studied in aqueous model systems containing fructose and aspartic acid, glutamic acid or asparagine at three different soluble solid concentrations (150, 300 and 450 g kg⁻¹), which were heat treated for different times at four temperatures (85, 90, 95 and 100 °C). Various indicators were used to evaluate the extent of the Maillard reaction: spectrophotometric measurements at 280 and 420 nm (A₂₈₀ and A₄₂₀) and CIE (Commission Internationale de l'Eclairage) parameters L* (lightness), a* (redness), b* (yellowness) and ΔE* (colour difference, which is expressed as [(Δa*)² + (Δb*)² + (ΔL*)²]^1/2). The pH and the formol index were also determined. The indicator for colourless intermediate formation, A₂₈₀, showed that the kinetic constant values increased with increasing heat treatment temperature, while the influence of soluble solid concentration was not clear. After a short induction period the data were well described by assuming zero‐order kinetics. Glutamic acid turned out to be the most reactive amino acid, while asparagine was the least reactive. With reference to brown pigment formation, A₄₂₀ and ΔE*, glutamic acid was the least reactive amino acid. In all the experiments assayed, except for glutamic solutions with fructose concentrations of 150 and 300 g kg⁻¹, the data were best correlated with combined kinetics. © 2000 Society of Chemical Industry     

KINETIC MODELINGS OF BROCCOLI COLOR CHANGES DURING CHILLED STORAGE

This work studied the kinetic models of broccoli color changes during storage. The Commission Internationale d'Eclairage ([CIE] International Commission on Illumination)‐L*a*b* color system parameters a*, b*, H°, total color difference (TCD), chlorophyll content and yellowness degree were used to determine the color changes under the storage conditions at 0, 5 and 10C. The broccoli ball was packed with high‐density polyethylene film. The experimental results showed that the package greatly promoted the activation energy of b* value in broccoli while delaying the respiration peak. The nonlinear regression analysis showed that the rate constants of color parameters b* and TCD were following a first‐order Arrhenius‐type reaction depending on temperature, and the polynomial model was suitable for the changes of a* and H° value. The observed results demonstrated that the variation of color parameters was in accordance with chlorophyll content and yellowness degree in stored broccoli, suggesting the possibility of a computer‐vision system application on the color grading of broccoli.     

Development of a colour scale for colour evaluation of beef carcasses at 60 min post mortem

The pectoralis profundus muscles of 200 selected beef carcasses were measured to develop a standard colour scale for evaluating beef carcasses at the time of classification (approximately 60 min post mortem). Five lightness (L*) values were chosen ranging from 22 to 42 with intervals of five L* units. Corresponding a* and b* values were calculated. Based on regressions between the actual reflection spectra and the L*, a* and b* values, spectra of the five chosen colours for the colour scale were predicted. The L*, a* and b* values accurately predicted the reflection spectra. A paint company imitated the five reflection spectra. Spectra could not be matched exactly, without metamerism occuring. Therefore, the colour scale should be used with specific light sources. The scale is recommended in The Netherlands to classify the colour of beef, as a supplement of SEUROP‐system for conformation and fatness. © 1999 Society of Chemical Industry     

Description of the kinetic enzymatic browning in banana (Musa cavendish) slices using non-uniform color information from digital images

A novel methodology “fractal browning indicator” (FBI) is presented, that describes the enzymatic browning kinetic based on the use of irregular color patterns from banana slice images. It uses the fractal Fourier texture image value in a selected area, to calculate a fractal dimension (FD), which represents the complexity of color distribution. During the procedure, colors from digital images were first transformed to L^*a^*b^* space color using a transformation function (quadratic model), in order to derivate three color channels, lightness (L^*), redness (a^*), and yellowness (b^*). In the results, lightness and yellowness parameters decreased during the browning kinetic, when their respective FD values increased, indicating major color distribution complexity in a selected area analyzed during the kinetic. The redness color (a^*) did not show any statistical variation. The empirical power law model was suitable to correlate enzymatic browning kinetic data both for FBI and for the traditional method (when an L^* mean was used). However, enzymatic browning rates using the FBI method, were between 8.5 and 35 times higher than rates calculated with the traditional method.     

Comparative effect of red yeast rice (Monascus purpureus), red beet root (Beta vulgaris) and betanin (E‐162) on colour and consumer acceptability of fresh pork sausages packaged in a modified atmosphere

Fresh pork sausages containing natural colorants, red yeast rice powder (Monascus purpureus; Frame^®) or a crude red beet root (Beta vulgaris) juice or commercial betanin (E‐162), at different concentrations, were packaged in an atmosphere containing 80% O₂ and 20% CO₂ and stored in the dark for 20 days. The following parameters were measured at 4 day intervals: instrumental colour (CIE L*, a*, b*, a*/b*, C* and h*), reflectance spectra, sensory discoloration (trained panel) and acceptability and willingness to purchase (habitual and non‐habitual consumer panels) under two different lighting displays (standard fluorescent and Promolux^® lamp). The use of colorants improved the colour properties of fresh pork sausages. Sausages with red yeast rice, red beet root juice and betanin had lower L* and h* and higher a* and a*/b* values than control samples. The colour properties of sausages with red beet root were the closest to control sausages, while sausages with red yeast rice had significantly lower b* values. Both natural colorants and betanin protected sausages from discoloration and extended acceptability and willingness to purchase by about 4 days, according to evaluation by habitual consumers under two different types of lighting display. Therefore, red beet root juice may be envisaged as the most suitable natural colorant for use in fresh pork sausages. Copyright © 2005 Society of Chemical Industry     

Influence of pH on colour and iron content of peptide fractions obtained from bovine Hb concentrate hydrolysates

The effect of pH on colour and iron content (Fe) of peptide fractions obtained from bovine haemoglobin concentrate (BHC) hydrolysates was studied. Four hydrolysates were obtained using three enzymes: Protex‐6‐L (P), Fungal–Protease–Concetrate (FC) and Flavourzyme (F). BHC and its hydrolysates (P, FC, P + F, FC + F) were fractioned at pH 4.5, 7.0 and 9.5. Solubility and Fe from different fractions were measured. Correlations between CIELAB colour parameters and Fe from different fractions were analysed. The colour from different fractions varied from red to yellow (a* and b* positives). Lightness values (L*) ranged from twenty‐four to seventy. FC4.5 and FC + F4.5 fractions were the clearest and yellow (higher L*, b*, h), while BHC9.5 and P + F9.5 fractions had the lowest values of L*, b* and h. There was an inverse linear relationship between b* and L* parameters and Fe from fractions. This relationship could be associated with the pH of extraction. As pH increases Fe significantly increases and lower b* and L* values were obtained.     

Kinetics of colour change of bamboo shoot slices during microwave drying

The effect of microwave power on colour change kinetics of bamboo shoot slices was investigated during microwave drying. Colour changes were quantified by tri‐stimulus Hunter L (whiteness/darkness), a (redness/greenness), and b (yellowness/blueness) system. These values were also used for calculation of total colour change (ΔE), chroma, hue angle, and browning index (BI). Microwave drying as expected changed colour parameters because of browning. The values of L and b decreased, while values of a and ΔE increased during drying. Mathematical modelling of colour change kinetics indicated that L, b, chroma and BI could be defined using a first‐order kinetic model, while a, ΔE and hue angle could be defined using a zero‐order kinetic model. Considering together colour deterioration and quality of dried bamboo shoot slices at higher power reveals the need of process standardisation for getting good quality product.     

Colour of post-harvest ripened and vine ripened tomatoes (Lycopersicon esculentum Mill.) as related to total antioxidant capacity and chemical composition

Greenhouse grown tomatoes (cvs ‘Durinta’, ‘Favorita’ and ‘Liberto’) were harvested green and vine ripe. Colour measurements and chemical analyses were performed on green, post‐harvest red and vine‐ripe fruits. Partial least square (PLS) regression was applied to predict the ferric reducing ability of plasma (FRAP) by means of colour measurements (L*, a* and b*). The PLS showed that 78% of the variation in colour were able to predict 74% of the variation in FRAP value. Chemical variables and colour variables together were able to predict 88% of the variation in FRAP by means of PLS regression. Linear regression showed a high negative correlation between high values of L*, b* and FRAP, and a high positive correlation between titratable acidity, a*, hue, a*/b*, soluble solids, vitamin C, dry matter and FRAP values. Thus, colour measurements of intact tomatoes can be used as a non‐destructive method to assess total antioxidant capacity of tomatoes.     

Relating raw rice colour and composition to cooked rice colour

BACKGROUND: The whiter the rice, the more it is preferred by consumers and the more value it has in the market place. The first objective of this study was to determine the interrelationships of raw colour, cooked colour, amylose content and protein content in rice. The second objective was to assess whether or not the colour of cooked rice can be predicted from raw rice colour in conjunction with amylose and protein contents. RESULTS: Protein and amylose contents were not significantly correlated with the colour measurements for raw rice. Protein and amylose showed moderate, significant associations with L* and a* and a*, b* and C* respectively for cooked rice. Only the colour variable a* of cooked rice could be predicted using protein, amylose and raw rice colour with high enough precision to be useful, and this was only for modelling using samples cooked in the same manner (rice cooker). Cooking method (rice cooker versus excess water) affected the colour of cooked rice. CONCLUSION: Being able to predict a* in cooked rice is likely of limited value. Only the model that used samples where postharvest handling conditions were controlled (US‐grown rice) was able to predict C*, a more useful measure, and then with only moderate ability. L*, a measure of brightness/whiteness, was not predicted well by any of the models. Copyright © 2011 Society of Chemical Industry     

Time course of the colour of young red wines from Vitis vinifera L. during ageing in bottle

The colour characteristics of red wines from Vitis vinifera L. cv Tempranillo, Graciano and Cabernet Sauvignon (vintage 2000) from Navarra (Spain), was studied during 26 months of ageing in bottle through the evaluation of the wine visible spectrum and of several colorimetric indices (colour intensity, %red, %yellow, %blue, %dA and tint) and CIELAB variables (L*, C*, h, a* and b*). During ageing in bottle, the spectrum of Tempranillo wine (pH 4.3) mainly changed in the absorbance range between 420 and 500 nm, whereas Graciano (pH 3.5) and Cabernet Sauvignon (pH 3.6) wines registered a decrease in absorbance in the interval between 500 and 560 nm. The time course of the different wine colour parameters was found to fit either a second‐order polynomium or a linear model, depending on the grape variety employed. CIELAB variables could be described in terms of their colorimetric index counterparts, showing b* and h relative greater errors. Although the wine total chromatic changes in CIELAB units registered after 26 months of ageing in bottle indicated changes perceivable by the human eye (ΔE* ≥ 2.7) for the three varieties studied, Graciano and Cabernet Sauvignon wines showed a more balanced colour evolution than Tempranillo wine.     

Roasting and Colouring Curves for Coffee Beans with Broad Time-Temperature Variations

The effects of time and temperature on change in bean colour and kinetics of coffee roasting covering pre-roasting and over-roasting condition were investigated. Arabica coffee beans (Colombia Excelso) were dried or roasted in an oven at constant temperatures (140, 180, 200, 220, 260, and 300 °C) to obtain the profiles of mass loss and colour change. Changes in roasting rate from the first stage (high rate) to the second (low rate) were found to occur at different levels of roast loss for different roasting temperatures. Roasting curves were obtained by normalising the data of mass reductions, which comprised solid and moisture, to the initial solid mass. Changes in bean colour were found to follow a certain path regardless of the roasting temperature, as shown by the characteristic colouring curve, and were less affected by the temperature compared to the roast loss. A method of predicting the bean colour during roasting was also presented by analysing the relationships among the L*, a* and b* values.