共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
针对微型功率双幅有源箝位谐振直流环节逆变器在正常工作过程中,传统箝位电压平衡母线短路控制策略带来损耗大的问题,开展了直流环节工作过程的分析,针对直流环节正常工作的情况下,箝位电容电压必须能平衡在设定值,提出了箝位电压平衡母线无短路控制策略,根据给出的损耗估算方法,通过Mathcad计算,对比了母线短路控制和无短路控制两种方式下的损耗,同时计算出了母线无短路控制箝位电容电压纹波不大于20%下的箝位电容参数。研究结果表明:微型功率ACRDCLI箝位电压平衡采用母线无短线控制,不但可以减少双幅有源箝位谐振直流环节逆变器的损耗,并且可以使用薄膜电容作为箝位电容,以达到微型功率ACRDCLI损耗低、寿命长的要求。 相似文献
3.
4.
光伏并网发电是太阳能利用的重要途径,而并网逆变器结构的选择和控制策略的改进是其研究的重点。在PSCAD/EMTDC平台上搭建了单级三相光伏并网系统的仿真模型,仿真模型中的并网逆变器采用双闭环的控制策略,其中电流内环根据非线性控制理论中反馈线性化的思想,实现电流的解耦控制,电压功率外环采用PI控制。仿真结果表明:该控制策略不仅控制精度高,稳定工作域大,并且必要时能在一定范围内对配网的无功进行调节,提高配网稳定性。 相似文献
5.
6.
《机械制造与自动化》2017,(5):1-6
与两级式光伏并网系统相比,单级式光伏并网系统在效率、成本等技术、经济指标上具有优势,但控制算法复杂。总结了单级式三相光伏并网逆变器拓扑结构的研究现状,包括电压源型逆变器、电流源型逆变器、Z源逆变器及其改进拓扑等,并综述了单级式三相光伏并网逆变器控制技术的研究进展,包括变流控制方法、基本控制结构、先进控制算法以及并网与无功补偿一体化控制研究。最后对单级式三相光伏并网系统控制技术的发展方向进行了展望。 相似文献
7.
8.
9.
《工业仪表与自动化装置》2015,(6)
分析了光伏发电并网系统的结构,建立了光伏电池简化模型,采用降压升压装置和扰动占空比算法跟踪分布式电源的最大功率,对逆变器采用电流电压双环结构的控制策略。搭建了并网运行的系统仿真模型。仿真结果表明:并网逆变器输出的电流和大电网电流同频同相,动态响应快,能够较好地反映三相光伏并网系统运行的特性,具有一定理论价值。 相似文献
10.
11.
Clarence W.DE SILVA 《Instrumentation》2019,(4):72-84
An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t... 相似文献
12.
A computer simulation model for the contact between longitudinally-oriented rough surfaces has been formulated. This model closely duplicates the actual surf ace contact deformation behavior by taking into account the elastic interactions between the asperities. There were no assumptions made about the shapes, or any deformation behavior of the asperities, except for their obeying the laws of elasticity. The plastic deformations on the high asperity peaks were taken into account by setting a ceiling on their contact pressures at the material hardness value. The simulations used real surface profiles which were digitized from unworn circumferentially ground steel surfaces. Each pair of these profiles was mathematically combined to form an equivalent rough profile pressing against an infinitely rigid flat and having the appropriately adjusted elastic modulus. A total of 28 different pairs of profiles were used in the simulations. Each contacting pair was subjected to 30 different load levels and the local contact pressures and deformations were calculated. The contact simulations yielded some important mathematical relationships between parameters, such as the real area of contact, average gap, and average asperity load through statistical curve fitting. Two analytical functions were generated to relate the average load to average gap and the real area of contact to load. 相似文献
13.
针对实际电网存在着大量的三绕组变压器,但国际上一些著名商业软件,如BPA仿真软件、Matpower这一权威潮流计算开源软件,均只提供双绕组变压器模型,限制了其在具有三绕组变压器的电力系统中的应用的问题,潮流计算是自主开发的电力系统各种应用软件的核心模块,因此依托国际权威开源程序进行二次开发,是一种较好的选择。对Matpower要求的数据格式进行了归纳,对变压器的一般的等值电路及带理想变压器的等值电路和带标幺值的等值电路进行了分析研究,提出了三绕组变压器转换为双绕组等效模型的建模方法,使得原先只适应双绕组变压器的潮流计算软件可以适用于三绕组变压器电网的潮流计算;最后以Matpower软件为例进行了案例计算,并用PSASP仿真软件进行对比验证。研究结果证明,所提出的建模方法是有效的。 相似文献
14.
The intersection of Quantum Technologies and Robotics Autonomy is explored in the present paper.The two areas are brought together in establishing an interdisci... 相似文献
15.
针对电站锅炉风险等级评价问题,将模糊综合评价技术应用到电站锅炉风险等级评价中。开展了电站锅炉失效影响因素及模糊评价因素的重要程度分析,建立了一套科学合理适于在线评价的电站锅炉风险评价体系,提出了模糊综合评价技术与改进的模糊层次分析法相结合的模糊风险评价方法,利用改进的模糊层次分析法计算了指标体系中各层指标权重。对某一台电站锅炉的实际运行工况影响子因素进行了模糊风险评价,采用模糊合成算子进行模糊综合运算得到电了站锅炉运行工况影响子因素的评价向量。研究结果表明:电站锅炉的运行工况影响子因素的风险评价等级为第6级,失效可能性等级为小,该电站锅炉运行工况良好。 相似文献
16.
针对具有进油孔的有限长滑动轴承油膜力求解问题,采用变分原理和分离变量法,求得了有限长滑动轴承油膜压力分布的近似解析表达式。将油膜压力分布的近似解析表达式在油膜存在区域上进行积分,即得到了油膜力。将提出的计算有限长滑动轴承油膜力方法与无限长轴承模型、有限元方法的计算结果进行了比较,发现了提出的方法与有限元方法的计算结果很接近。最后,研究了进油孔位置和进油压力对油膜存在区域、油膜力等的影响,研究结果表明进油孔位置和进油压力对油膜存在区域和油膜力有较大的影响。 相似文献
17.
交通荷载作用下桥梁结构参数识别方法 总被引:2,自引:1,他引:1
应用动力节点加载法,将作用在桥梁上的交通荷载转化为等效节点荷载,再用两步构造法识别结构物理参数.第1步,用Newmark-β方法变换结构运动方程,并用结构的加速度响应求得变换空间内的位移、速度和加速度响应;第2步,基于最小二乘原理,构造出变换空间内求解结构参数的递推式,进行结构物理参数识别.数值模拟结果表明,在交通荷载作用下,该方法能够快速、准确地进行桥梁结构参数识别. 相似文献
18.
INTEGRAL EQUATION METHOD'S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES 总被引:1,自引:0,他引:1
LI Cheng ZHENG Yanping 《机械工程学报(英文版)》2008,21(6):115-118
The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value. 相似文献
19.
The fraction defective of semi-finished products is predicted to optimize the process of relay production lines, by which production quality and productivity ar... 相似文献
20.
The use of hand gestures can be the most intuitive human-machine interaction medium.The early approaches for hand gesture recognition used device-based methods.... 相似文献