Direct-hydrothermal synthesis of LiFe<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>PO<Subscript>4</Subscript> cathode materials

Carbon free LiFe_1−x Mn _x PO₄ (x = 0, 0.05, 0.1, 0.2, 0.4) cathode materials were prepared by a direct-hydrothermal process at 170 °C for 10 h. The structural and electrochemical properties of the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), charge–discharge experiments, cyclic voltammetry (CV) and alternating current (AC) impedance spectroscopy. The electrochemical performance of LiFePO₄ prepared in this manner showed to be positively affected by Mn²⁺-substitution. Among the Mn²⁺-substitution samples, the LiFe_0.9Mn_0.1PO₄ exhibited an initial discharge capacity of 141.4 mA h g⁻¹ at 0.1 C, and the capacity fading is only 2.7% after 50 cycles.     

Spatial localization of holes in La<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>CuO<Subscript>4</Subscript>

The parameters of the tensor of the electric field gradient (EFG) in cation sites of the La_{2 ? x} Sr _x CuO₄ lattice have been determined by the method of emission Mössbauer spectroscopy on ⁵⁷Co(^57m Fe), ⁶⁷Cu(⁶⁷Zn), ⁶⁷Ga(⁶⁷Zn), and ¹⁵⁵Eu(¹⁵⁵Gd) isotopes. There is no quantitative agreement between the calculated (the pointcharge model) and experimental values of the main component of the tensor EFG V _zz , which is explained by the absence of the reliable data on the Sternheimer coefficients for Fe³⁺, Zn²⁺, and Gd³⁺ ions. Based on the comparison of the calculated and experimental dependences of V _zz on x it was shown that the holes appearing during the substitution of La³⁺ for Sr²⁺ are localized preferably on the oxygen atoms that are in the same plane as the copper atoms, which is in agreement with the model discussed in the literature and assumes that the mechanism responsible for the high-temperature superconductivity of solid solutions La_{2 ? x} Sr _x CuO₄ is the interaction between the conductivity electrons and two-atomic two-electron centers with negative correlation energy.     

Synthesis and Properties of Alkyl <Emphasis Type="Italic">β</Emphasis>-<Emphasis Type="SmallCaps">d</Emphasis>-Galactopyranoside

A series of alkyl β-d-galactopyranosides were prepared by the trichloroacetimidate method with d-galactose and alcohols with different chain lengths as raw materials. Their solubility, surface tension, emulsification, foaming, wettability, thermotropic liquid crystalline properties, and thermal stability were investigated. Alkyl β-d-galactopyranosides are soluble in water and ethanol, and the solubility decreases with increasing alkyl chain length. Decyl β-d-galactopyranoside was insoluble in water, but soluble in ethanol. Dissolution of alkyl β-d-galactopyranoside in water is an endothermic process with dissolution enthalpies greater than zero. Nonyl β-d-galactopyranoside had an excellent emulsifying property, better foaming ability and the best foam stability. The CMC values of alkyl β-d-galactopyranosides decrease with increasing of alkyl chain length. Alkyl β-d-galactopyranosides are thermally stable up to 270 °C. Alkyl β-d-galactopyranosides show the distinctive optical texture of a thermotropic liquid crystal smectic A type phase. Decyl β-d-galactopyranoside showed the strongest wettability.     

Investigation of the Meyer-Neldel rule for AC conduction in glassy Se<Subscript>100 − <Emphasis Type="Italic">x</Emphasis></Subscript>Te<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> alloys

In many amorphous and liquid semiconductors and other class of materials, the Meyer-Neldel rule is observed in the dc conductivity, where the preexponential factor (σ₀) is found to increase exponentially with the activation energy (ΔE). In the present paper, we report on the observation of the Meyer-Neldel rule in case of ac conductivity at high temperatures (300–350 K) in bulk samples of glassy Se_{100 − x} Te _x (x = 10, 20, 30) alloys. In this temperature range, the approximate variation in ac conductivity with temperature is found to be exponential and the activation energy is found to vary with frequency. The observation of the Meyer-Neldel rule in the present study is explained in terms of the compensation effect in the relaxation time. The text was submitted by the authors in English.     

A novel ∈-lysine acylase from <Emphasis Type="Italic">Streptomyces mobaraensis</Emphasis> for synthesis of <Emphasis Type="Italic">N∈</Emphasis>-acyl-<Emphasis Type="SmallCaps">l</Emphasis>-lysines

A novel ∈-lysine acylase (N ₆-acyl-l-lysine amidohydrolase; EC 3.5.1.17) was isolated from Streptomyces mobaraensis and purified to homogeneity by SDS-PAGE from the culture broth. The purified enzyme was monomeric, with a molecular mass of approximately 60 kDa. The enzyme was inactivated by the presence of 1,10-phenanthroline and activated in the presence of Co²⁺ and Zn²⁺. The enzyme showed a pH optimum of 8.0 and was stable at temperatures of up to 50°C for 1 h at pH 8.0. The enzyme specifically catalyzed the hydrolysis of the amide bond of various N∈-acyl-l-lysines. Furthermore, the enzyme efficiently catalyzed the synthesis of N∈-acyl-l-lysines with fatty and aromatic acyl groups in an aqueous buffer. In the syntheses of N∈-decanoyl-l-lysine, N∈-lauroyl-l-lysine, and N∈-myristoyl-l-lysine, the product precipitated and the yield was 90% or higher using 10 mM FA and 0.5 M l-lysine as the substrate.     

3-Hydroxybenzoic acid as AISI 316L stainless steel corrosion inhibitor in a H<Subscript>2</Subscript>SO<Subscript>4</Subscript>–HF–H<Subscript>2</Subscript>O<Subscript>2</Subscript> pickling solution

3-Hydroxybenzoic acid (3-HBA) was studied for possible use as a AISI 316L stainless steel (SS) corrosion inhibitor in an environmental-friendly aqueous pickling solution of 75 g l^–1 sulphuric acid (H₂SO₄), 25 g l^–1 hydrofluoric acid (HF) and 30 g l^–1 hydrogen peroxide (H₂O₂). 3-HBA was tested in concentrations from 5 × 10^–5 to 5 × 10^–1 M at 298 and 313 K temperature. Inhibition efficiency increased with the 3-HBA concentration. The inhibitor mechanism is discussed in terms of the properties of the isotherm equations of Frumkin, Hill-de Boer and Kastening–Holleck mainly. The shape, the trend of the slopes along the curve and the existence of inflection points, were analysed as the characteristics that differentiate one adsorption equation from another. The best fit was obtained using the Frumkin isotherm model. The projected molecular area of 3-HBA was calculated as a structural parameter to elucidate its optimal inhibition mechanism.     

Optical absorption and disorder in the As<Subscript>40</Subscript>S<Subscript>60 − <Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> vitreous alloys

The absorption edge spectra of vitreous alloys in the As-S-Se system are measured in the temperature range 77–300 K. The parameters of the fundamental absorption edge and the electron-phonon interaction in As₄₀S_{60 ? x} Se _x (x = 0–40) glasses are determined, and the influence of the compositional disorder on these parameters is investigated. The contributions of the static structural and temperature disorders to the smearing of the fundamental absorption edge of the alloys under study are evaluated.     

Magnetic and structural inhomogeneities of the La<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ca<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3 + δ</Subscript> manganites

The specific features revealed in the behavior of the parameters of the crystal structure and the lattice dynamics of the La_{1 ? x} Ca _x MnO_{3 + δ} manganites upon the transition to a magnetically ordered state are investigated using X-ray powder diffraction and inelastic neutron scattering. The results obtained are explained in terms of an inhomogeneous state of the samples. This state manifests itself in the form of local regions that are enriched or depleted in charge carriers, with the former regions characterized by the highest temperature of ferromagnetic ordering in the system under investigation. A comparison of the evolution of the crystal structure with variations in the temperature both in the presence and in the absence of a magnetic field has demonstrated that the inhomogeneities are eliminated by an external magnetic field and that the regions enriched in charge carriers become predominant in the system.     

Effects of various factors on capacitive properties of VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>·<Emphasis Type="Italic">n</Emphasis>H<Subscript>2</Subscript>O powders in aqueous electrolyte

In this work, effects of drying temperature, pH of aqueous electrolyte and current density on capacitive performance of VO _x ·nH₂O material were firstly investigated. VO _x ·nH₂O powders were prepared by a melt quenching method. The samples were characterized by X-ray diffraction analysis (XRD) and Fourier transform infrared (FTIR). The capacitive properties of VO _x ·nH₂O samples were examined by cyclic voltammetry and galvanostatic charge/discharge test. VO _x ·nH₂O sample which was obtained at the drying temperature of 80 °C, delivers a maximum specific capacitance of 227.3 F g⁻¹ and exhibits excellent capacity retention in the potential range of −0.3 to 0.7 V at a current density of 200 mA g⁻¹ in NaNO₃ solution with pH 2.     

Electrochemical and theoretical studies of thienyl-substituted amino triazoles on corrosion inhibition of copper in 0.5 M H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

2,5-Bis(2-thienyl)-4-amino-1,2,4-triazole (2-TAT) and 2,5-bis(3-thienyl)-4-amino-1,2,4-triazole (3-TAT) have been studied as inhibitors for the corrosion of copper in 0.5 M H₂SO₄ using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The inhibition efficiency of the triazole compounds increases with increasing concentration, and the effect of 3-TAT is better than that of 2-TAT with the same concentration. Potentiodynamic polarization measurements indicate the triazole compounds act as mixed type inhibitors in 0.5 M H₂SO₄. The adsorption of the triazole compounds is found to obey the Langmuir adsorption isotherm. High significant correlations for the triazole compounds are obtained between inhibition efficiency and quantum chemical parameters (R = 0.975) using the quantitative structure–activity relationship (QSAR) method.     

Synthesis of Highly Effective CeO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>–MnO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>–BaO Catalysts for Direct NO Decomposition

Abstract  

Ce–Mn mixed oxides with a Mn/(Ce + Mn) molar ratio of 0.25 were prepared by solvothermal (ST-1) and co-precipitation (CP) methods, and Ba was loaded on the Ce–Mn oxides. In addition, CeO₂–MnO _x –BaO catalysts with various compositions were directly prepared by the solvothermal (ST-2) method. The NO decomposition activities of these catalysts were examined. Among the catalysts examined, the ST-2 catalyst having a nominal composition of Ce_0.8Mn_0.15Ba_0.05O _x exhibited the highest activity; 77% NO conversion to N₂ was attained at 800 °C. These catalysts were characterized by X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The Raman and XPS results indicate that the CP catalyst had larger amounts of the BaMnO_3-δ and/or Mn₃O₄ phases. The ST-1 and ST-2 catalysts had highly dispersed Ba species on the surface. The ST-2 catalyst had Mn species with the lowest binding energy of Mn 2p and also had a high population of oxygen vacancies in the ceria lattice, suggesting that Mn species with a low oxidation state contributes to the formation of oxygen vacancies, which play an important role in this reaction.     

Fabrication of Coaxial Si<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Heterostructure Nanowires by O<Subscript>2</Subscript> Flow-Induced Bifurcate Reactions

We report on bifurcate reactions on the surface of well-aligned Si_1−x Ge _x nanowires that enable fabrication of two different coaxial heterostructure nanowires. The Si_1−x Ge _x nanowires were grown in a chemical vapor transport process using SiCl₄ gas and Ge powder as a source. After the growth of nanowires, SiCl₄ flow was terminated while O₂ gas flow was introduced under vacuum. On the surface of nanowires was deposited Ge by the vapor from the Ge powder or oxidized into SiO₂ by the O₂ gas. The transition from deposition to oxidation occurred abruptly at 2 torr of O₂ pressure without any intermediate region and enables selectively fabricated Ge/Si_1−x Ge _x or SiO₂/Si_1−x Ge _x coaxial heterostructure nanowires. The rate of deposition and oxidation was dominated by interfacial reaction and diffusion of oxygen through the oxide layer, respectively.     

Syntheses and optical properties of <Emphasis Type="Italic">α</Emphasis>- and <Emphasis Type="Italic">β</Emphasis>-cyano-poly(<Emphasis Type="Italic">p</Emphasis>-phenylene vinylene) derivatives

Two light emitting molecules with the cyano group at different positions on the vinylene i.e., 2,5-bis(2-thienyl-1-cyanovinyl)-1-(2_-ethylhexyloxy)-4-methoxybenzene (-TPT) and 2,5-bis(2-thienyl-2-cyanovinyl)-1-(2-ethylhexyloxy)-4-methoxybenzene (-TPT), and corresponding polymers, i.e., poly[2,5-bis(2-thienyl-1-cyanovinyl)-1-(2-ethylhexyloxy)-4-methoxybenzene] (denoted as P1) and poly[2,5-bis(2-ethienyl-2-cyanovinyl)-1-(2-ethylhexyloxy)-4-methoxybenzene] (denoted as P2) were synthesized. -TPT and -TPT, respectively, were blended into two host polymers, poly(methyl methacrylate (PMMA) and poly(9-vinylcarbazole) (PVK), to study the optical properties of the dopants in different host polymer matrices. Although -TPT and -TPT have the same backbone structure, their optical properties are much different. The PL emission maximum ( _max) of -TPT was found blue-shifted, compared with that of -TPT, while the PL intensity of -TPT was stronger than that of -TPT. Concentration effect in the optical properties was found, 1 wt% of -TPT in PVK had the maximum fluorescent emission.The PL maximum peak wavelengths for polymer films (P1 and P2) were found red-shifted; while their PL intensities were weaker when compared with those of blends.     

Rh<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Pd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Nanoparticle Composition Dependence in CO Oxidation by NO

Abstract  

Bimetallic 15 nm Pd-core Rh-shell Rh_1−x Pd _x nanoparticle catalysts have been synthesized and studied in CO oxidation by NO. The catalysts exhibited composition-dependent activity enhancement (synergy) in CO oxidation in high NO pressures. The observed synergetic effect is attributed to the favorable adsorption of CO on Pd in NO-rich conditions. The Pd-rich bimetallic catalysts deactivated after many hours of oxidation of CO by NO. After catalyst deactivation, product formation was proportional to the Rh molar fraction within the bimetallic nanoparticles. The deactivated catalysts were regenerated by heating the sample in UHV. This regeneration suggests that the deactivation was caused by the adsorption of nitrogen atoms on Pd sites.     

Synthesis of La<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3 + δ</Subscript> manganites by pyrohydrolysis of nitrates

Single-phase finely dispersed perovskite-like manganites La_{1 ? x} Sr _x MnO_{3 + δ} (0 ≤ x ≤ 0.33) with an average particle size of approximately 3μm were synthesized by the pyrohydrolytic method from a stoichiometric mixture of the corresponding metal nitrates at a temperature of 500°C in a water vapor atmosphere. The parameter δ was changed as a result of the subsequent heat treatment. It was established that the manganite La_0.67Sr_0.33MnO_{3 + δ} synthesized by the pyrohydrolytic method is characterized by a more pronounced change in the magnetoresistance as compared to the manganite that had the same composition but was synthesized according to the conventional ceramic technique.     

Synthesis and proton incorporation in BaCe<Subscript>0.9−<Emphasis Type="Italic">x</Emphasis></Subscript>Zr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Y<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>

BaCe_0.9−x Zr _x Y_0.1O_3−δ powders were synthesized by a solid-state method at 1,400 °C. Two compositions were studied (x = 0.3 and x = 0.7). Pellets were prepared and conventionally sintered in air at 1,700 °C. Then, the samples were heated at 600 °C for 3 h in different reducing atmospheres: dry hydrogen, wet hydrogen and wet deuterium. After each treatment, the proton diffusion depth profile was obtained using Secondary Ion Mass Spectroscopy (SIMS). Protons were not incorporated in the material when the gas was not wet, and the isotope effect suggests that protons present in the pellet come from water and not from hydrogen.     

Study of Oxygen Reactivity in La<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>CoO<Subscript>3−δ</Subscript> Perovskites for Total Oxidation of Toluene

Abstract  

The total oxidation of toluene is studied over catalytic systems based on perovskite with general formula AA′CoO_3-δ (A = La, A′ = Sr). The systematic and progressive substitution of La³⁺ by Sr²⁺ cations in the series (La_1−x Sr _x CoO_3−δ system) of the perovskites have been studied to determine their influence in the final properties of these mixed oxides and their corresponding reactivity performance for the total oxidation of toluene as a model volatile organic compound with detrimental effects for health and environment. The structure and morphology of the samples before and after reaction have been characterized by XRD, BET and FE-SEM techniques. Additional experiments of temperature programmed desorption of O₂ in vacuum and reduction in H₂ were also performed to identify the main surface oxygen species and the reducibility of the different perovskites. It is remarkable that the La_1−x Sr _x CoO_3−δ series presents better catalytic performance for the oxidation of toluene, with lower values for the T₅₀ (temperature of 50 % toluene conversion) than the previously studied LaNi_1−y Co _y O₃ series.     

Sol-Gel Synthesis,Thermal Behavior of Nanopowders and Chemical Stability of La<Subscript>1 – <Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>PO<Subscript>4</Subscript> Ceramic Matrices

Nanosized powders of orthophosphates in the LaPO₄–HoPO₄–H₂O system have been synthesized to determine the mutual solubility of LaPO₄ · nH₂O and HoPO₄ · nH₂O initial components and to obtain ceramic matrices by sintering them. Formation of hexagonal, monoclinic or tetragonal solid solutions was revealed, and their limits and thermal stability were determined. A series of limited hexagonal LaPO₄ · nH₂O-based solid solutions was observed within the 0 ≤ x ≤ 0.6 concentration range up to 600°C. Further they transformed to monoclinic LaPO₄-based form within the 0 ≤ x ≤ 0.3 concentration range. Solubility of LaPO₄ · nH₂O and LaPO₄ in tetragonal HoPO₄(· nH₂O) is lower (≤10 mol %). Specific surface area of La_1–xHo_xPO₄ · nH₂O powders was in the range of 90.5–165.0 m²/g depending on x. Leaching rate of La³⁺ and Ho³⁺ from La_1–xHo_xPO₄ matrices in nitric acid solution (pH 1–2) was determined to be 10^–5–10^–2 g/(cm² day) for both ions.     

Thermal expansion and phase transitions in K<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Cs<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>BSi<Subscript>2</Subscript>O<Subscript>6</Subscript> borosilicate solid solutions

Solid solutions K_{1 − x} Cs _x BSi₂O₆ (x (atomic fraction) = 0.00, 0.20, 0.30, 0.35, 0.40, 0.80, 0.90,1.00) have been prepared by solid-phase synthesis and crystallization of glasses in the KBSi₂O₆-CsBSi₂O₆ borosilicate series. The thermal behavior of the solid solutions has been investigated using the annealing and quenching techniques, dilatometry, and high-temperature X-ray powder diffraction. It has been shown that solid solutions with x = 0.00–0.35 and 0.40–1.00 correspond to space groups I $ \bar 4 $ \bar 4 3d and I a $ \bar 3 $ \bar 3 d, respectively. The cubic-cubic phase transition I $ \bar 4 $ \bar 4 3d ai Ia $ \bar 3 $ \bar 3 d occurs in the composition range x = 0.35−0.40 at room temperature. In the series of solid solutions with x = 0−0.30, the reversible cubic-cubic polymorphic transition I $ \bar 4 $ \bar 4 3d ai ia $ \bar 3 $ \bar 3 d with an increase in the temperature has been revealed, the temperature of the polymorphic transition has been determined, and the thermal expansion in both polymorphic modifications has been studied using high-temperature X-ray diffraction and dilatometry. The solid solutions belonging to the space group Ia $ \bar 3 $ \bar 3 d are characterized by a lower thermal expansion than the solid solution belonging to the space group I $ \bar 4 $ \bar 4 3d. According to the calculations, the equivalents α/γ for the space groups I $ \bar 4 $ \bar 4 3d and Ia $ \bar 3 $ \bar 3 d are 0.03 and 0.02 (in cesium atomic fractions per degree Celsius), respectively.     

Kinetics of stepwise bulk crystallization of AsSe<Subscript>1.5</Subscript>Sn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> (<Emphasis Type="Italic">x</Emphasis> ≤ 0.28) glasses

The kinetics of stepwise transformations during bulk isothermal crystallization of semiconducting AsSe_1.5Sn _x (x = 0.13, 0.20, 0.28) glasses has been studied in the temperature range of 210?310°С using ¹¹⁹Sn Mössbauer spectroscopy, XPA, and the density and microhardness measurements of the quenched specimens. The kinetics of the gross bulk crystallization of glasses have been analyzed according to the data on density measurement using the Kolmogorov–Avrami equation, which was generalized on stepwise and incomplete isothermal transformations.