Mass transport process for the adsorption of Cr(VI) onto water‐insoluble cationic starch synthetic polymers in aqueous systems

Dynamic adsorption behaviors between Cr(VI) ion and water‐insoluble amphoteric starches was investigated. It was found that the HCrO ion predominates over the initial pH ∼ 2–4, the CrO ion predominates over the initial pH ∼ 10–12, and both ions coexist over the initial pH ∼ 6–8. The sorption process occurs in two stages: the external mass transport process occurs in the early stage and the intraparticle diffusion process occurs in the long‐term stage. The diffusion coefficient of the early stage (D₁) is larger than that of the long‐term stage (D₂) for the initial pH 4 and pH 10. The diffusion rate of HCrO ion is faster than that of CrO ion for both processes. The D₁ and D₂ values are ∼ 1.38 × 10⁻⁷–10.1 × 10⁻⁷ and ∼ 0.41 × 10⁻⁷–1.60 × 10⁻⁷ cm² s⁻¹, respectively. The ion diffusion rate in both processes is concentration dependent and decreases with increasing initial concentration. The diffusion rate of HCrO ion is more concentration dependent than that of CrO ion for the external mass transport process. In the intraparticle diffusion process, the concentration dependence of the diffusion rate of HCrO and CrO ions is about the same. The external mass transport and intraparticle diffusion processes are endothermic and exothermic, respectively, for the initial pH 4 and pH 10. The k_d values of the external mass transport and intraparticle diffusion processes are ∼ 15.20–30.45 and ∼ −3.53 to −12.67 kJ mol⁻¹, respectively. The diffusion rate of HCrO ion is more temperature dependent than that of CrO ion for both processes. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2409–2418, 1999     

Synthesis,characterization, and thermodynamic properties of poly(3‐mesityl‐2‐hydroxypropyl methacrylate)

Poly(3‐mesityl‐2‐hydroxypropyl methacrylate) (PMHPMA) was synthesized in a 1,4‐dioxane solution with 2,2′‐azobisisobutyronitrile as the initiator at 60°C. The homopolymer and its monomer were characterized with ¹H‐ and ¹³C‐NMR, Fourier transform infrared, differential scanning calorimetry, thermogravimetric analysis, size exclusion chromatography, and elemental analysis techniques. According to size exclusion chromatography analysis, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of PMHPMA were 65,864 g/mol, 215,375 g/mol, and 3.275, respectively. According to thermogravimetric analysis, the carbonaceous residue value of PMHPMA was 14% at 500°C. The values of the specific retention volume, adsorption enthalpy, sorption enthalpy, sorption free energy, sorption entropy, partial molar free energy, partial molar heat of mixing, weight fraction activity coefficient of solute probes at infinite dilution (Ω), and Flory–Huggins interaction parameter (χ) were calculated for the interactions of PMHPMA with selected alcohols and alkanes by the inverse gas chromatography method at various temperatures. According to Ω and χ, selected alcohols and alkanes were nonsolvents for PMHPMA at 423–453 K. Also, the solubility parameter of PMHPMA (δ₂) was found to be 24.24 and 26.33 (J/cm³)^0.5 from the slope and intercept of (δ/RT) ? χ/V₁ = (2δ₂/RT)δ₁ ? δ/RT at 443 K, respectively [where δ₁ is the solubility parameter of the probe, V₁ is the molar volume of the solute, T is the column temperature (K), and R is the universal gas constant]. The glass‐transition temperature of PMHPMA was found to be 386 and 385 K by inverse gas chromatography and differential scanning calorimetry techniques, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 101–109, 2006     

Effect of pH,ionic strength,and temperature on uranyl ion adsorption by poly(N‐vinyl 2‐pyrrolidone‐g‐tartaric acid) hydrogels

Poly‐electrolyte N‐vinyl 2‐pyrrolidone‐g‐tartaric acid (PVP‐g‐TA) hydrogels with varying compositions were prepared in the form of rods from ternary mixtures of N‐vinyl 2‐pyrrolidone/tartaric acid/water. The effect of external stimuli, such as the solution pH, ionic strength, and temperature, on uranyl adsorption by these hydrogels was investigated. Uranyl adsorption capacities of the hydrogels were determined to be 53.2–72.2 (mg UO/g dry gel) at pH 1.8, and 35.3–60.7 (mg UO/g dry gel) at pH 3.8, depending on the amount of TA in the hydrogel. The adsorption studies have shown that the temperature and the ionic strength of the swelling solution also influence uranyl ion adsorption by PVP‐g‐TA hydrogels. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2219–2226, 2000     

Morphological studies of the modified materials: Low-density polyethylene/poly(acrylic acid)/europium(III) and low-density polyethylene/poly(acrylic acid)/uranyl ion

The morphology of low-density polyethylene (LDPE) modified by in situ sorption and thermal polymerization of acrylic acid (AA) in the matrix was examined. The microstructure of the LDPE/poly(acrylic acid) (PAA) materials after Eu³⁺ and UO ion exchange was investigated. The phase behavior of these materials was analyzed using X-ray diffraction, scanning electron microscopy (SEM), and thermal measurements (DSC). The X-ray dif-fraction studies showed that PAA is located at amorphous region of the matrix. The LDPE/PAA surface, as investigate by SEM, was apparently homogeneous before and after Eu³⁺ and UO ion exchange, respectively. Two T_g values were found for the LDPE/PAA material before and after Eu³⁺ ion exchange. Also, three and four T_g values were found for LDPE/PAA after UO ion exchange depending on the amount of UO in the modified matrix. This indicates microphase domains in the LPDE/PAA-, LPDE/PAA/Eu³⁺-, and LPDE/PAA/UO -modified materials, although a lack of visible phase separation in the micrographs was observed. © 1996 John Wiley & Sons, Inc.     

Use of amidoximated acrylonitrile/N‐vinyl 2‐pyrrolidone interpenetrating polymer networks for uranyl ion adsorption from aqueous systems

Poly(N‐vinyl 2‐pyrrolidone) (PVP)/acrylonitrile (AN) interpenetrating polymer networks (IPNs) were synthesized and amidoximated for the purpose of uranyl ion adsorption. The adsorption of amidoximated IPNs was studied from different uranyl ion solutions (850, 1000, 1200, 1400, and 1600 ppm). The result of all our adsorption studies showed that the bonding between UO‐amidoxime groups complied with the Langmuir‐type isotherm. The adsorption capacity was found as 0.75 g UO/g dry amidoximated IPN. In order to increase the UO ion adsorption capacity the amidoximated IPN was treated with alkali, but no significant increase could be observed. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2324–2329, 2001     

Several features of vinyl chloride–diallyl phthalate suspension copolymerization

Vinyl chloride–diallyl phthalate (VC–DAP) suspension copolymerization was carried out in a 5‐L autoclave and 200‐mL stainless steel vessel at 45°C. The apparent reactivity ratios of VC–DAP suspension copolymerization system were calculated as r_VC = 0.77 and r_DAP = 0.37. It shows that VC–DAP copolymer contains no gel when the feed concentration of DAP (f) is lower than a critical concentration (f_cr, inside the range of 0.466–0.493 mmol/mol VC at 80–85% conversion), the polymerization degree (DP) of copolymer increases with the increase of f and conversion. VC–DAP copolymer is composed of gel and sol fractions when f is larger than f_cr. The DP of sol fraction decreases as f increases, but the gel content and the crosslinking density of gel increase. The gel content also increases as conversion increases. The results also show that the index of polydispersity of molecular weight of sol changes with f, a maximum value appears when f is close to f_cr. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 156–162, 2000     

Influence of anionic form on thermal degradation of TMAHP–cellulose

Trimethylammoniumhydroxypropyl (TMAHP)–cellulose in 10 anionic forms (F^?, Cl^?, Br^?, I^?, HSO, NO, OH^?, HCO, H₂PO, CH₃COO^?) was prepared, and the influence of each anion on thermal degradation in inert atmosphere was studied. With the help of dynamic and isothermal thermogravimetry (TG) it was found that H₂PO ions had the greatest retarding effect on TMAHP–cellulose degradation. From the values of rate constants it can be seen that all ionic forms of TMAHP–cellulose have the starting rate of thermal degradation greater than unmodified cellulose. The calculated values of activation energy of thermal degradation for different ionic forms are decreasing in following sequence: H₂PO > F^? > NO > I^? > Br^? > HCO > Cl^? > HSO > OH^? > unmodified cellulose > CH₃COO^?. From the results of pyrolyse measurements in combination with gas chromatography and mass spectrometry (Py–GC–MS) it follows that the products of the elimination of quarternary ammonium salts are trimethylamine, 3-hydroxy-2-propanone, and, in the case of OH^? form, water. In all other ionic forms the third product is the corresponding acid.     

Determination of crystallinity ratio and some physicochemical properties of poly(4‐methyl‐1‐pentene)

It was determined that the thermal stability of poly(4‐methyl‐1‐pentene) (P4MP) was maintained up to 424°C in an inert atmosphere by thermogravimetric analysis. The retention diagrams of ethyl acetate, tert‐butyl acetate, and benzene on P4MP were plotted at temperatures between 30 and 280°C by inverse gas chromatography (IGC) technique. Melting temperature of the polymer was determined as 230 and 239.5°C by IGC and differential scanning calorimetry (DSC), respectively. The percent crystallinity of P4MP was obtained from the retention diagrams at temperatures below melting point. The percent crystallinity obtained by IGC is in good agreement with the ones obtained by DSC. Then, specific retention volume, V, weight fraction activity coefficient, Ω, Flory‐Huggins polymer‐solvent interaction parameter, χ, equation‐of‐state polymer‐solvent interaction parameter, χ, and effective exchange energy parameter, X_eff of octane, nonane, decane, undecane, dodecane, tridecane, n‐butyl acetate, isobutyl acetate, isoamyl acetate with P4MP, were determined between 240 and 280°C by IGC. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Intrinsic birefringence of nylon 6

Different values are reported in the literature for the intrinsic birefringence of the crystalline (Δn) and the amorphous (Δn) phases in nylon 6. Mostly, these values have either been determined by extrapolation (and then it is assumed that Δn = Δn) or calculated theoretically. In this study, intrinsic birefringence values Δn and Δn for nylon 6 were determined using the Samuels two-phase model which correlates sonic modulus with structural parameters. Three series of fiber samples were used: (1) isotropic samples of different degrees of crystallinity for estimation of E and E moduli at two temperatures. The following modulus values were obtained: 1.62 × 10⁹ and 6.66 × 10⁹ N/m² for 28.5°C, and 1.81 × 10⁹ and 6.71 × 10⁹ N/m² for ?20°C; (2) anisotropic, amorphous fiber samples for estimation of Δn = 0.076 and E = 1.63 × 10⁹ N/m² at 28.5°C; (3) semicrystalline samples of various draw ratios for estimations of Δn = 0.089 and Δn = 0.078. All measurements were carried out with carefully dried samples to avoid erroneous results caused by moisture.     

Elastic characteristics of branched-network polymers

The computed dependencies of elastic characteristics of branched-network polymers were obtained on the basis of the Takayanagi series model. The moduli ratio (λ) for branched-network and branched polymers increases as a result of an increase of the moduli ratio of network and branched phases (E/E) and the network phase fraction (V_net). The λ-increase as a function of V_net is larger than in the case of the E/E dependence. On the basis of computed dependencies, the experimental results for the radiation crosslinked SBS block copolymer were considered. The experimental results agree with the computed de-pendencies for the hetergeneous branched-network polymers with E/E ≈︁ 20. The influence of entanglements on the elastic characteristics of branched-network polymers is discussed. © 1996 John Wiley & Sons, Inc.     

Structure and properties of poly(vinyl alcohol)–iodine complex formed in the crystal phase of poly(vinyl alcohol) films

The structure and optical properties of the complex formed in the crystal phase of PVA that is caused by soaking at very high iodine concentration are investigated. In the resonance Raman spectra of lightly and heavily iodinated specimens, two Raman shifts appeared at 109 and 161 cm^?1. The 109 cm^?1 peak due to the I mode was much stronger than the 161 cm^?1 peak in a heavily iodinated specimen, whereas the peak was comparable with the 161 cm^?1 peak in a lightly iodinated specimen. The complex formed in the crystal phase is identified as the I mode complex. It has an averaged iodine–iodine distance of 3.2 Å, which is different from the 3.08 Å of the I mode complex formed in the amorphous phase. The effect of KI concentration in the soaking solution on the formation of the complex is also examined. The increased KI concentration in the soaking solutions at a fixed iodine concentration increases the amount of the complex formed in the crystal phase. The change in the hydrogen-bonding state in the crystal phase with the complex formation can be evidenced by IR and NMR. © 1994 John Wiley & Sons, Inc.     

Application of poly(phthalazinone ether sulfone ketone)s to gas membrane separation

A series of poly(phthalazinone ether sulfone ketone) (PPESK) copolymers containing different component ratios of bis(4‐fluorodiphenyl) ketone and bis(4‐chlorodiphenyl)sulfone with respect to a certain amount of 4‐(4‐hydroxyphenyl)‐2,3‐phthalazin‐1‐one were synthesized by polycondensation. Glass transition temperatures of these polymers were adjusted from 263°C to 305°C by changing the ratios of reactants. Gas permeability and selectivity of the dense membranes of the polymers for three kinds of gases (CO₂, O₂, and N₂) were determined at different temperatures. The result indicated that the membrane of PPESK (S/K = 1/1, mol ratio) had an excellent gas separation property. Permeability of the polymer membranes for CO₂, O₂, and N₂ was P = 4.121 barrier, P = 0.674 barrier, and P = 0.0891 barrier, respectively. Separation factors of α and α were 7.6 and 46, respectively. New material was made into a composite membrane with silicone rubber for blocking up leaks and defects on the surface of its nonsymmetrical membrane. As a result of the test, permeability of the composite membrane was J = 7.2 × 10⁻⁶ cm³ (STP) cm⁻² S⁻¹ cm⁻¹ Hg and J = 0.99 × 10⁻⁶ cm³ (STP) cm⁻² S⁻¹ cm⁻¹ Hg, whereas the α was still higher than 7. These showed that PPESKs had a bright prospect as the potential membrane material for high‐temperature gas separation. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2385–2390, 1999     

Atom‐transfer radical polymerization of methyl methacrylate with α,α′‐dichloroxylene/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system under microwave irradiation

The atom‐transfer radical polymerization (ATRP) of methyl methacrylate (MMA), using α,α′‐dichloroxylene as initiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst was successfully carried out under microwave irradiation (MI). The polymerization of MMA under MI showed linear first‐order rate plots, a linear increase of the number‐average molecular weight with conversion, and low polydispersities, which indicated that the ATRP of MMA was controlled. Using the same experimental conditions, the apparent rate constant (k) under MI (k = 7.6 × 10^?4 s^?1) was higher than that under conventional heating (k = 5.3 × 10^?5 s^?1). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2189–2195, 2004     

Forced oscillations in continuous flow stirred tank reactors with nonlinear step growth polymerization

The self-step growth polymerization of RA_f monomers in homogeneous, continuous flow stirred tank reactors (HCSTRs) is simulated under conditions of periodic feed concentration (with frequency ω and amplitude α). By having periodic operation, the polydispersity index of the polymer is found to increase by about 35% over the values at steady state. Periodic operation of HCSTRs is found to lead to gelation only for certain values of the frequency and the dimensionless residence time τ^*. Gelling envelopes have been obtained to give conditions under which HCSTRs should be operated. These envelopes can be described in terms of two critical dimensionless residence times, τ and τ such that nongelling operation is always ensured when τ^* < τ. For τ^* > τ, periodic operation always leads to gelation, and HCSTRs cannot be used. For τ < τ^* < τ, the gelling behavior is found to depend on the functionality f, amplitude α, and the dimensionless residence time τ^*.     

Synthesis,characterization, and metal‐ion uptake studies of chelating resins derived from formaldehyde‐condensed azodyes of aniline and 4,4′‐diaminodiphenylmethane coupled with phenol/resorcinol

The diazonium salts of aniline and 4,4′‐diaminodiphenylmethane coupled with phenol and resorcinol were condensed with formaldehyde in alkaline media to yield polymeric resins. These polymers were found to readily react with metal ions like Cu²⁺ and UO, forming polychelates. The azodyes, resins, and polychelates were characterized by several instrumental techniques such as elemental analysis, FTIR, ¹H‐NMR, GPC, XRD, TG–DTG, and DSC studies. The chelating capacity of the resins toward Cu²⁺ and UO ions was studied by spectrophotometry. The extent of metal loading of the resins was studied by varying the time of contact, metal‐ion concentration, and pH of the reaction medium. The alkali and alkaline earth metal ions had little effect on the metal‐ion uptake behavior of the resins. The resin derived from the azodye of 4,4′‐diaminodiphenylmethane was found to be more efficient in removing the metal ions from solution than were the resins from aniline. The optimum conditions for effective separation of Cu²⁺ from UO were determined. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 3128–3141, 2000     

Gas permeabilities of poly(trimethylsilylpropyne) membranes surface modified with CF4 plasma

Surface fluorination of poly(trimethylsilylpropyne) (PTMSP) membranes by CF₄ plasma was studied. The surface fluorination of the membranes was carried out in an atmosphere of CF₄ in a capacitively coupled discharge apparatus with external electrodes. Dramatic increase in selectivity (P/P) was observed. The effect of fluorination conditions such as duration of treatment and discharge power on the permeabilities of the membranes was studied. X-ray photoelectron spectrometric data of modified PTMSP membranes showed a drastic alternation in the surface layer. The P and P/P of the membranes were observed to be dependent on the F/C atomic ratio. At F/C > 1, the P/P value of the membranes could be more than four. © 1993 John Wiley & Sons, Inc.     

Accelerating effect of NaNO2 on the polymer plating of 6‐substituted‐1,3,5‐triazine‐2,4‐dithiol mono sodium salts

Organic polymer plating properties of 6‐substituted‐1,3,5‐triazine‐2,4‐dithiol mono sodium salts were investigated in the presence of various supporting electrolytes. Among these, the NaNO₂ supporting electrolyte greatly accelerated the film formation rate in polymer plating. The accelerating effect of NaNO₂ was further confirmed by comparing plating potentials in the presence of NaNO₂ and Na₂CO₃. The potentiostatic polymer plating of DAN in the presence of the NaNO₂ supporting electrolyte took place in the potential range of 1.65–1.8 V (compared against saturated calomel electrode reference). Film formation was influenced by such factors as the pH of solution and both the chemical structure and the concentration of triazine dithiol. In polymer platings, NO anions are thought to be electrochemically oxidized to yield NO radicals and these radicals react with DAN to yield new thiyl radicals. The thiyl radicals in the DAN molecules couple with each other by means of disulfide bonds, resulting in the growth of polymer film. Organic polymer plating films are shown to contain disulfide bonds, monosulfide bonds obtained by the reaction between allyl groups and thiyl radicals, and network chains. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2300–2309, 2001     

Carbon‐13 nuclear magnetic resonance investigation of styrene–α‐methylstyrene copolymers

A copolymer based on α‐methylstyrene (AMS) was investigated by nuclear magnetic resonance (NMR). The styrene‐co‐α‐methylstyrene (SAMS) was analyzed by solution and solid‐state NMR techniques. Three copolymers of SAMS with different compositions presented a particular behavior. The solution results showed the copolymer microstructure and the AMS content. The carbon‐13 spectra of SAMS C indicated that the AMS CH₃ signal was detected at three distinct chemical shifts, because of the different comonomer‐sequences distribution. The proton spin–lattice relaxation time in the rotating frame (Tρ) parameter was chosen because it permits the evaluation of changes in the molecular mobility. The values of Tρ found for the copolymers confirmed the random distribution in the samples. The copolymer with a low quantity of AMS (1.7%), when analyzed by this relaxation parameter, showed lower values that were interpreted as an antiplasticization effect. The SAMS copolymer with a higher AMS quantity showed a plasticization effect. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 261–266, 2001     

Competitive adsorption of uranyl ions in the presence of Pb(II) and Cd(II) ions by poly(glycidyl methacrylate) microbeads carrying amidoxime groups and polarographic determination

The adsorption capacity of UO in the presence of Pb(II) and Cd(II) ions was investigated with amidoximated poly(glycidyl methacrylate) (PGMA) microbeads with an average size of 135 μm packed in a glass column (0.5‐cm i.d. and 20‐cm length, flow rate = 3 mL/min) under competitive conditions. A differential pulse polarography technique was used for the determination of trace quantities of uptaken elements by the measurement of the reduction peak currents at ?200/?950, ?400, and ?600 mV (vs a saturated calomel electrode) for UO, Pb(II), and Cd(II) ions, respectively. When only UO was found in the eluate, its adsorption was 85.3% from a 50 μM initial solution. However, when there was UO with binary systems of Pb(II) or Cd(II), it was 78.2 and 76.3%, respectively. On the other hand, in a ternary mixture of UO with Pb(II) and Cd(II), the adsorption was found to be 75.2% with the same initial concentration. According to the results, the competitive adsorption studies showed that these amidoximated PGMA microbeads had good adsorption selectivity for UO with the coexistence of Pb(II) and Cd(II) ions. The ionic strength of the solution also influenced the UO adsorption capacity of the amidoximated PGMA microbeads. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4168–4172, 2007