Copolymerization of N‐(4‐carboxyphenyl) itaconimide or N‐(4‐carboxyphenyl) itaconamic acid with methyl methacrylate

This paper describes the synthesis and characterization of N‐(4‐carboxyphenyl) itaconamic acid (CPA) and N‐(4‐carboxyphenyl) itaconimide (CPI) obtained by reacting itaconic anhydride with p‐aminobenzoic acid. Structural and thermal characterization of CPA and CPI was done using ¹H‐NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of CPA or CPI with methyl methacrylate (MMA) in solution was carried out at 60 °C using azobisisobutyronitrile as an initiator and dimethyl acetamide or THF as solvent. Feed compositions having varying mole fractions of CPA or CPI ranging from 0.05–0.20 or 0.1–0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by ¹H‐NMR and elemental analysis. Copolymer composition was determined using percentage nitrogen content. The reactivity ratios were r₁ (MMA) = 0.68 ± 0.06 and r₂ (CPI) = 0.46 ± 0.06. The intrinsic viscosity [η] was determined using an Ubbelohde suspension level viscometer. [η] decreased with increasing mole fraction of N‐(p‐carboxyphenyl) itaconimide or N‐(p‐carboxyphenyl) itaconamic acid in copolymers. Glass transition temperature and thermal stability of the copolymers were determined using DSC and thermogravimetric analysis, respectively. The glass transition temperature (T_g) as determined from DSC scans increased with increasing amounts of CPA or CPI in copolymers. A significant improvement in the char yield was observed upon copolymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1909–1915, 2005     

Free radical copolymerization of N,N‐dimethylaminoethyl methacrylate with styrene and methyl methacrylate: monomer reactivity ratios and glass transition temperatures

BACKGROUND: The properties of copolymers depend strongly on their composition; therefore in order to tailor some for specific applications, it is necessary to control their synthesis, and, in particular, to know the reactivity ratios of their constituent monomers. Free radical copolymerizations of N,N‐dimethylaminoethyl methacrylate (DMAEM) with styrene (ST) and methyl methacrylate (MMA) in toluene solution using 1‐di(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane as initiator at 70 °C were investigated. Monomer reactivity ratios were determined for low conversions using both linear and nonlinear methods. RESULTS: For the DMAEM/ST system the average values are r₁ = 0.43 and r₂ = 1.74; for the DMAEM/MMA system the average values are r₁ = 0.85 and r₂ = 0.86. The initial copolymerization rate, R_p, for DMAEM/ST sharply decreases as the content of ST in the monomer mixture increases up to 30 mol% and then attains a steady value. For the DMAEM/MMA copolymerization system the composition of the feed does not have a significant influence on R_p. The glass transition temperatures (T_g) of the copolymers were determined calorimetrically and calculated using Johnston's sequence length method. A linear dependence of T_g on copolymer composition for both systems is observed: T_g increases with increasing ST or MMA content. CONCLUSION: Copolymerization reactivity ratios enable the design of high‐conversion processes for the production of copolymers of well‐defined properties for particular applications, such as the improvement of rheological properties of lubricating mineral oils. Copyright © 2009 Society of Chemical Industry     

Copolymerization and thermal behavior of methyl methacrylate with N‐(phenyl/p‐tolyl) itaconimides

This study describes the synthesis, characterization, and thermal behavior of copolymers of methyl methacrylate (MMA) and N‐p‐tolyl itaconimide (PTI)/N‐phenyl itaconimide (I). Homopolymerization and copolymerization of N‐(phenyl/p‐tolyl) itaconimide with MMA was carried out by use of various mole fractions of N‐aryl itaconimide in the initial feed from 0.1 to 0.5, using azobisisobutyronitrile as an initiator and tetrahydrofuran as the solvent. The copolymer composition was determined by ¹H‐NMR spectroscopy using the proton resonance signals attributed to –OCH₃ of MMA (δ = 3.5–3.8 ppm) and the aromatic protons (δ = 7.0–7.5 ppm) of N‐aryl itaconimide. The reactivity ratios of the monomers were found to be r₁ (PTI) = 1.33 ± 0.05/r₂ (MMA) = 0.24 ± 0.03 and r₁ (I) = 1.465 ± 0.035/r₂ (MMA) = 0.385 ± 0.005. The molecular weight of the copolymers decreased with increasing mole fraction of N‐aryl itaconimide in the copolymers. Glass‐transition temperature (T_g) and thermal stability of PMMA increased with increasing amounts of itaconimides in the polymer backbone. A significant increase in the percentage char yield at 700°C was observed on incorporation of a low mole fraction of N‐aryl itaconimides. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1195–1202, 2003     

Copolymerization of N‐aryl substituted itaconimide with methyl methacrylate: Effect of substituents on monomer reactivity ratio and thermal behavior

The article describes the synthesis and characterization of N‐(4‐methoxy‐3‐chlorophenyl) itaconimide (MCPI) and N‐(2‐methoxy‐5‐chlorophenyl) itaconimide (OMCPI) obtained by reacting itaconic anhydride with 4‐methoxy‐3‐chloroanisidine and 2‐methoxy‐5‐chloroanisidine, respectively. Structural and thermal characterization of MCPI and OMCPI monomers was done by using ¹H NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of MCPI or OMCPI with methyl methacrylate (MMA) in solution was carried out at 60°C using AIBN as an initiator and THF as solvent. Feed compositions having varying mole fractions of MCPI and OMCPI ranging from 0.1 to 0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by FTIR, ¹H NMR, and elemental analysis and percent nitrogen content was used to calculate the copolymer composition. The monomer reactivity ratios for MMA–MCPI copolymers were found to be r₁ (MMA) = 0.32 ± 0.03 and r₂ (MCPI) = 1.54 ± 0.05 and that for MMA–OMCPI copolymers were r₁ (MMA) = 0.15 ± 0.02 and r₂ (OMCPI) = 1.23 ± 0.18. The intrinsic viscosity [η] of the copolymers decreased with increasing mole fraction of MCPI/or OMCPI. The glass transition temperature as determined from DSC scans was found to increase with increasing amounts of OMPCI in copolymers. A significant improvement in the char yield as determined by thermogravimetry was observed upon copolymerization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2391–2398, 2006     

Synthesis of imide‐based methacrylic monomers and their copolymerization with methyl methacrylate: monomer reactivity ratios and heat resistance properties

The newly designed methacrylic monomer series 4‐phthalimidocyclohexyl methacrylate (PCMA ), 4‐hexahydrophthalimidocyclohexyl methacrylate (HPCMA) and 4‐hexahydro‐3,6‐methanophthalimidocyclohexyl methacrylate (HMPCMA) were synthesized. Their homopolymers and methyl methacrylate (MMA) based copolymer series were polymerized by free‐radical polymerization. The copolymer compositions were characterized using ¹H NMR spectra. The monomer reactivity ratios were calculated employing the Fineman?Ross (F‐T) and Kelen?Tüdös (K‐T) methods at low conversion. The values of r₁ and r₂ obtained by the F‐T and K‐T methods appear to be in close agreement (their average values are r₁ = 1.3061 and r₂ = 0.7336 for poly(PCMA‐co‐MMA), r₁ = 1.5169 and r₂ = 0.6840 for poly(HPCMA‐co‐MMA), r₁ = 1.7748 and r₂ = 0.5664 for poly(HMPCMA‐co‐MMA)) . The thermal stabilities and thermomechanical characteristics of the homopolymer and copolymer series were investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical thermal analysis. © 2018 Society of Chemical Industry     

Synthesis and monomer reactivity ratios of ethyl α‐acetoxyacrylate and acrylic acid copolymers

The synthesis of ethyl α‐acetoxyacrylate (EAA) and the study of its radical polymerization is described. We report the monomer reactivity ratios for copolymers of EAA and acrylic acid (AA) using three different methods: the Jaacks, the Macret and the Fineman–Ross methods. Copolymers were obtained by free radical polymerization initiated by 2,2′‐azobisisobutyronitrile in acetonitrile solutions and were analyzed by NMR and HPLC. The HPLC analysis was used to determine the molar fractions of EAA and AA in the copolymers. The reactivity ratios were estimated to be close to 1 for each monomer. Thus, copolymers of poly(acrylic acid) bearing some biodegradable units of EAA in the chain were subsequently prepared. The study of the hydrolysis of these units shows that only basic conditions were efficient to lead to hydrolyzed monomer units. Copyright © 2005 Society of Chemical Industry     

Reactivity ratios and copolymer properties of 2‐(diisopropylamino)ethyl methacrylate with methyl methacrylate and styrene

Free radical copolymerization kinetics of 2‐(diisopropylamino)ethyl methacrylate (DPA) with styrene (ST) or methyl methacrylate (MMA) was investigated and the corresponding copolymers obtained were characterized. Polymerization was performed using tert‐butylperoxy‐2‐ethylhexanoate (0.01 mol dm^?3) as initiator, isothermally (70 °C) to low conversions (<10 wt%) in a wide range of copolymer compositions (10 mol% steps). The reactivity ratios of the monomers were calculated using linear Kelen–Tüd?s (KT) and nonlinear Tidwell–Mortimer (TM) methods. The reactivity ratios for MMA/DPA were found to be r₁ = 0.99 and r₂ = 1.00 (KT), r₁ = 0.99 and r₂ = 1.03 (TM); for the ST/DPA system r₁ = 2.74, r₂ = 0.54 (KT) and r₁ = 2.48, r₂ = 0.49 (TM). It can be concluded that copolymerization of MMA with DPA is ideal while copolymerization of ST with DPA has a small but noticeable tendency for block copolymer building. The probabilities for formations of dyad and triad monomer sequences dependent on monomer compositions were calculated from the obtained reactivity ratios. The molar mass distribution, thermal stability and glass transition temperatures of synthesized copolymers were determined. Hydrophobicity of copolymers depending on the composition was determined using contact angle measurements, decreasing from hydrophobic polystyrene and poly(methyl methacrylate) to hydrophilic DPA. Copolymerization reactivity ratios are crucial for the control of copolymer structural properties and conversion heterogeneity that greatly influence the applications of copolymers as rheology modifiers of lubricating oils or in drug delivery systems. © 2015 Society of Chemical Industry     

Thermosensitive Poly[(2‐(diethylamino)ethyl methacrylate)‐co‐(N,N‐dimethylacrylamide)] Cryogels Prepared by a Two‐Step Polymerization Method

Summary: Temperature‐sensitive P(DEAEMA‐co‐DMAAm) cryogels with five different DMAAm contents were synthesized via a two‐step polymerization method, the initial polymerization being conducted for various times at 22 °C, followed by polymerization at ?26 °C for 24 h. The influence of the first‐step time and the content of DMAAm on the swelling ratio and network parameters such as the polymer/solvent interaction parameter, the average molecular mass between crosslinks, and the mesh size of the cryogels were reported and discussed. The swelling studies indicated that the swelling increased in the following order: 22C45 > 22C30 > 22C15 > 22C0. The cryogels exhibited swelling/deswelling transitions (reentrant phenomena) in water depending on temperature. These properties were attributed to the macroporous and regularly arranged network of the cryogels. Scanning electron microscope graphs reveal that the macroporous network structure of the cryogels can be adjusted by applying a two‐step polymerization.

Chemical structure of the P(DEAEMA‐co‐DMAAm) cryogels.     

Copolymerization of methyl methacrylate with 4‐vinylpyridine initiated by a novel Ni(II)α‐Benzoinoxime complex

Copolymerizations of methyl methacrylate (MMA) with 4‐vinylpyridine (4VP) were performed from different monomer feed ratios in 1,4‐dioxan at 30°C under free radical initiation experimental conditions, using Ni(II)α‐Benzoinoxime complex as initiator. The obtained copolymers (PMMA4VP) were examined by FTIR and ¹H NMR spectroscopies. The composition of these copolymers was calculated, using ¹H NMR spectra and elemental analysis. Monomer reactivity ratios were estimated from Fineman–Ross (FR, r_m = 0.550, r_v = 1.165) and Kelen–Tudos (KT, r_m = 0.559, r_v = 1.286) linearization methods, as well as nonlinear error in variables model (EVM) method using the RREVM computer program (RREVM, r_m = 0.559, r_v = 1.264). These values suggest that MMA‐4VP pair copolymerizes randomly. ¹H NMR spectra provide information about the stereochemistry of the copolymers in terms of sequence distributions and configurations. These results showed that the age of the Ni complex has an impact not only on its activity towards polymerization reactions but also on the features of the corresponding copolymers, whereas the chemical composition was insensitive to this prominent factor. The mechanism of MMA‐4VP copolymerization is consistent with a radical process as supported by microstructure and molecular weight distribution studies. Thermal behaviours of these copolymers were investigated by differential scanning calorimetry and thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis of pH‐ and temperature‐responsive chitosan‐graft‐poly[2‐(N,N‐dimethylamino) ethyl methacrylate] copolymer and gold nanoparticle stabilization by its micelles

Novel pH‐ and temperature‐responsive chitosan‐graft‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] (chitosan‐g‐PDMAEMA) copolymers were successfully synthesized by homogeneous atom transfer radical polymerization (ATRP) under mild conditions. Chitosan macroinitiator was prepared by phthaloylation of amino groups of chitosan and subsequent acylation of hydroxyl groups of chitosan with 2‐bromoisobutyryl bromide. The copolymers were obtained by ATRP of 2‐(N,N‐dimethylamino)ethyl methacrylate and they can self‐assemble into stable micelles in water. Hybrid micelles with a PDMAEMA corona incorporating gold nanoparticles (Au NPs) were prepared in situ via the reduction of HAuCl₄ with NaBH₄. The pH and temperature responses of the copolymer micelles and hybrid micelles were characterized using UV‐visible spectroscopy and dynamic laser light scattering. The morphology of the micelles was observed using transmission electron microscopy and atomic force microscopy. The PDMAEMA corona of the micelles acts as the ‘nanoreactor’ and the ‘anchor’ for the in situ formation and stabilization of Au NPs. Therefore, the spatial distribution of Au NPs within the micelles can be tuned by varying the temperature and pH value. Copyright © 2010 Society of Chemical Industry     

Thermo‐ and pH‐sensitive hydrogels based on 2‐(2‐methoxyethoxy)ethyl methacrylate and methacrylic acid

Hydrogels based on commercially available 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA), with methacrylic acid (MAA) as comonomer, are studied. The incorporation of an ionizable monomer, such as MAA, in a thermosensitive system leads to the formation of hydrogels able to respond to pH and temperature according to their monomeric composition. Thus, at low pH, the acid groups of MAA are protonated, and they do not contribute to increase the hydrophilic balance, and collapse of the hydrogels occurs around room temperature. For temperatures below that of collapse, the degree of swelling increases with increasing MEO₂MA content. In contrast, at neutral or basic pH, the ionization of the acid groups contributes to increase the hydrophilicity and the osmotic pressure, leading to polyelectrolyte behaviour. In this regime, the swelling capacity increases and the thermosensitivity decreases with increasing MAA content in the hydrogels. These properties make poly(MEO₂MA‐co‐MAA) hydrogels suitable candidates for use in oral controlled delivery of hydrophobic drugs. This possibility is explored using ibuprofen as a model drug, after a complete study of the swelling kinetics. Copyright © 2010 Society of Chemical Industry     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry