Investigations on esterification reactions of starches in 1‐N‐butyl‐3‐methylimidazolium chloride and resulting substituent distribution

The ionic liquid (IL) 1‐N‐butyl‐3‐methylimidazolium chloride ([C₄mim]⁺Cl^?) was used as solvent for different esterification reactions of the biopolymer starch. Therefore, maize starches with varying content of amylose were used. Different carboxylic acid anhydrides were applied to esterify starch with a degree of substitution (DS) in the range of 0.7–3.0. For example, starch acetates with the mentioned DS are accessible within 30 min at a 105°C‐reaction temperature. The DS distribution of starch acetates synthesized in IL was compared with the common starch acetate synthesis of Mark and Mehltretter. Also, a consideration of starch acetates and cellulose acetates synthesized in [C₄mim]⁺Cl^? is given. The starch esters were characterized by means of Raman spectroscopy for qualitative‐ and nuclear magnetic resonance spectroscopy for quantitative determination of the functionalization pattern. Moreover, the molecular mass distribution was determined after saponification by means of GPC‐MALLS. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and Surface Active Properties of tri[(N‐alkyl‐N‐ethyl‐N‐Sodium carboxymethyl)‐2‐Ammonium bromide ethylene] Amines

Trimeric betaine surfactants tri[(N‐alkyl‐N‐ethyl‐N‐sodium carboxymethyl)‐2‐ammonium bromide ethylene] amines were prepared with raw materials containing tris(2‐aminoethyl) amine, alkyloyl chloride, lithium aluminium hydride, sodium chloroacetate, and bromoethane by alkylation, Hoffman degradation reaction, carboxymethylation and quaternary amination reaction. The chemical structures of the prepared compounds were confirmed by FTIR, ¹H NMR, MS and elemental analysis. With the increasing length of the carbon chain, the values of their critical micelle concentration initially decreased. Surface active properties of these compounds were superior to general carboxylate surfactants C₁₀H₂₁CHN⁺(CH₃)₂COONa. The minimum cross‐sectional area per surfactant molecule (A_min), standard Gibbs free energy adsorption (ΔG_ads) and standard Gibbs free energy micellization (ΔG_mic) are notably influenced by the chain length n, and the trimeric betaine surfactants have greater ability to adsorb at the air/water interface than form micelles in solution. The efficiency of adsorption at the water/air interface (pC₂₀) of these surfactants increased with the increasing length of the alkyl chain. Their foaming properties, wetting ability of a felt chip, and lime‐soap dispersing ability were also investigated.     

Diallyl‐1,12‐diaminododecane‐based cyclopolymers and their use as inhibitors for mild steel corrosion

A variety of N,N‐diallyl compounds, capable of undergoing cyclopolymerization, are prepared from 1,12‐dodecanediamine. Selective monoformylation followed by allylation of the parent diamine afforded N,N‐diallyl‐N′‐formyl‐1,12‐dodecanediamine which was converted into quaternary ammonium monomers N,N‐diallyl‐N‐benzyl (or p‐methoxybenzyl)‐N′‐formyl‐1,12‐dodecanediamine by reacting with benzyl‐ or p‐methoxybenzyl chloride. The monomers on homo‐ and co‐cyclopolymerization (with SO₂) afforded the cationic polyelectrolytes which on acidic hydrolysis of the formyl group gave water‐soluble polyelctrolytes. All the synthesized monomers, polymers, and the starting 1,12‐dodecanediamine were used to study the corrosion inhibition of mild steel by gravimetry and electrochemical methods in acidic and saline media at 60°C. The inhibitor molecules (at a concentration of 400 ppm) exhibited inhibition efficiencies (%IE) in the ranges 62%–99% in 1 M HCl, 95%–99% in 4 M HCl, 13%–91% in 7.7 M HCl, 13%–91% in 0.5 M H₂SO₄, and 75%–90% in 3.5% NaCl. There is a dramatic increase in the IEs by the monomers and polymers in comparison to the parent diamine. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Synthesis of soluble and thermally stable polyimides from 3,5‐diamino‐N‐(4‐(8‐quinolinoxy) phenyl) aniline and various dianhydrides

Three novel polyimides (PIs) having pendent 4‐(quinolin‐8‐yloxy) aniline group were prepared by polycondensation of a new diamine with commercially available tetracarboxylic dianhydrides, such as pyromellitic dianhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and bicyclo[2.2.2]‐oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride. These PIs were characterized by FTIR, ¹H NMR, and elemental analysis; they had high yields with inherent viscosities in the range of 0.4–0.5 dl g⁻¹, and exhibited excellent solubility in many organic solvents such as N,N‐dimethyl acetamide, N,N′‐dimethyl formamide, N‐methyl pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. These PIs exhibited glass transition temperatures (T_g) between 250 and 325° C. Their initial decomposition temperatures (T_i) ranged between 270 and 450°C, and 10% weight loss temperature (T₁₀) up to 500°C with 68% char yield at 600°C under nitrogen atmosphere. Transparent and hard polymer films were obtained via casting from their NMP solutions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Water‐soluble dual responsive polythiophene‐g‐poly(methoxyethoxy ethyl methacrylate)‐co‐poly(N,N‐diethylamino ethyl methacrylate) for different applications

Polythiophene (PT) based dual responsive water‐soluble graft copolymer (PT‐g‐[poly(methoxyethoxy ethyl methacrylate)‐co‐poly(N,N‐diethylamino ethyl methacrylate)]) (PT‐g‐P(MeO₂MA‐co‐DEAEMA)) (PTDE) has been synthesized by random copolymerization of methoxyethoxy ethyl methacrylate (MeO₂MA) and N,N‐diethylamino ethyl methacrylate (DEAEMA) at 30 °C on the 2,5‐poly(3‐[1‐ethyl‐2‐(2‐ bromoisobutyrate)] thiophene) (PTI) macroinitiator using the Cu based atom transfer radical polymerization technique. The PTDE graft copolymer was characterized by gel permeation chromatography and ¹H NMR techniques and it exhibits thermo‐reversible solubility in water showing a lower critical solution temperature of ca 42 °C in neutral aqueous solution. The PTDE graft copolymer contains a fluorescent PT backbone, and interestingly the system exhibits doubling of fluorescence intensity with rising temperature over the temperature range 41–45 °C at pH 7. The PTDE system therefore acts following the principle of the polymeric AND logic gate and it is also found to be effective in sensing of nitroaromatics, particularly picric acid. The influence of chain hydrophobicity on the logic operation and on the sensing of nitroaromatics is discussed. © 2014 Society of Chemical Industry     

Organosoluble and light‐colored fluorinated polyimides based on 1,1‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐1‐phenylethane and various aromatic dianhydrides

To investigate the CF₃ group affecting the coloration and solubility of polyimides (PI), a novel fluorinated diamine 1,1‐bis[4‐(4‐amino‐2‐ trifluoromethylphenoxy)phenyl]‐1‐phenylethane (2) was prepared from 1,1‐ bis(4‐hydrophenyl)‐1‐phenylethan and 2‐chloro‐5‐nitrobenzotrifluoride. A series of light‐colored and soluble PI 5 were synthesized from 2 and various aromatic dianhydrides 3a–f using a standard two‐stage process with thermal 5a– f(H) and chemical 5a–f(C) imidization of poly(amic acid). The 5 series had inherent viscosities ranging from 0.55 to 0.98 dL/g. Most of 5a–f(H) were soluble in amide‐type solvents, such as N‐methyl‐2‐pyrrolidone (NMP), N,N‐ dimethylacetamide (DMAc), and N,N‐dimethylformamide (DMF), and even soluble in less polar solvents, such as m‐Cresol, Py, Dioxane, THF, and CH₂Cl₂, and the 5(C) series was soluble in all solvents. The GPC data of the 5a–f(C) indicated that the Mn and Mw values were in the range of 5.5–8.7 × 10⁴ and 8.5–10.6 × 10⁴, respectively, and the polydispersity index (PDI) Mw /Mn values were 1.2–1.5. The PI 5 series had excellent mechanical properties. The glass transition temperatures of the 5 series were in the range of 232–276°C, and the 10% weight loss temperatures were at 505–548 °C in nitrogen and 508–532 °C in air, respectively. They left more than 56% char yield at 800°C in nitrogen. These films had cutoff wavelengths between 356.5–411.5 nm, the b* values ranged from 5.0–71.1, the dielectric constants, were 3.11–3.43 (1MHz) and the moisture absorptions were in the range of 011–0.40%. Comparing 5 containing the analogous PI 6 series based on 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐ phenylethane (BAPPE), the 5 series with the CF₃ group showed lower color intensity, dielectric constants, and better solubility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2399–2412, 2005     

Stabilization of vinyl chloride/vinylidene chloride copolymers using N‐substituted maleimides

As a consequence of their excellent barrier properties, vinyl chloride/vinylidene chloride copolymers have long been prominent in the flexible packaging market. While these polymers possess a number of superior characteristics, they tend to undergo thermally induced degradative dehydrochlorination at process temperatures. This degradation must be controlled to permit processing of the polymers. Three series of N‐substituted maleimides (N‐alkyl‐, N‐aralkyl‐, and N‐aryl‐) have been synthesized, characterized spectroscopically, and evaluated as potential stabilizers for a standard vinyl chloride/vinylidene chloride (85 wt%) copolymer. As surface blends with the polymer, these compounds are ineffective as stabilizers. However, significant stabilization may be achieved by pretreatment of the polymer with N‐substituted maleimides. The most effective stabilization of the polymer is afforded by N‐aralkyl‐ or N‐arylmaleimides, most notably, N‐benzylmaleimide and N‐(p‐methoxyphenyl)maleimide. J. VINYL. ADDIT. TECHNOL. 12:88–97, 2006. © 2006 Society of Plastics Engineers.     

Palladium‐Catalyzed N‐Arylation of N,N‐Dialkylhydrazines with Aryl Chlorides

N,N‐Dialkyl‐N′‐arylhydrazines have been prepared usually in high to excellent yields via the reaction of N,N‐dialkylhydrazines with aryl chlorides in the presence of Pd₂(dba)₃, Xphos and NaO‐t‐Bu in dioxane at 120 °C. With ortho‐substituted aryl chlorides best results have been obtained by using 2‐(2′,6′‐dimethoxybiphenyl)dicyclohexylphosphine (ligand d) as the ligand.     

Copolymerization of N‐substituted maleimide with alkyl acrylate and its industrial applications

A series of new copolymers with desired thermal stability and mechanical properties for applications in leather industry were synthesized from various substituted maleimides and alkyl acrylates. Polymerization was carried out by a free‐radical polymerization using benzoyl peroxide (BPO) as initiator. The monomers and polymers synthesized were characterized by elemental analysis, IR, and nuclear magnetic resonance (NMR). Interestingly, these polymers were soluble in common organic solvents. Copolymer composition and reactivity ratios were determined by ¹H‐NMR spectra. The molecular weights of the polymers were determined by gel permeation chromatography. The homo‐ and copolymer of maleimide showed single‐stage decomposition (ranging from 300–580°C). The initial decomposition temperatures of poly[N‐(phenyl)maleimide] [poly(PM)], poly[N‐4‐(methylphenyl)maleimide] [poly(MPM)] and poly[N‐3‐(chlorophenyl)maleimide] [poly(CPM)] were higher compared to those of the copolymers. Heat‐resistant adhesives such as blends of epoxy resin with phenyl‐substituted maleimide‐co‐glycidyl methacrylate copolymers with improved adhesion property were developed. Different adhesive formulations of these copolymaleimides were prepared by curing with diethanolamine at two different temperatures (30°C and 60°C). © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1870–1879, 2001     

Synthesis and characterization of fluorocarbon‐modified poly(N‐isopropylacrylamide)

Poly(N‐isopropylacrylamide) copolymers (PNIPAMs) containing pendent perfluoroalkyl (R_F) or dodecyl groups have been synthesized by copolymerization of NIPAM with small amounts of R_R‐acrylates or ‐methacrylates containing a sulfonamido moiety between the acrylate and R_F groups or with dodecyl acrylate. Evidence for strong intermolecular hydrophobic association of the fluorocarbon groups is provided by large viscosity increases with copolymer concentration and upon addition of NaCl and surfactants. These interactions appear to be much stronger than that of the corresponding copolymers of poly(N,N‐dimethylacrylamide) with similar comonomer contents. Hydrophobic association between the R_F groups is found to be much stronger than that of the corresponding dodecyl groups. The viscosity of some of the copolymer solutions, particularly in the presence of perfluorocarbon surfactants, was unusually temperature sensitive, decreasing by a factor of at least 1000 upon increasing the temperature from 10 to 20 °C. This large decrease is most probably related to the collapse of the copolymer coils near the lower critical solution temperature. This is in sharp contrast to the corresponding polyacrylamide or poly(N,N‐dimethylacrylamide) R_F‐acrylate copolymers that show viscosity increases with increasing temperature in the 40–60 °C range. The NIPIAM copolymers were also found to be different from the acrylamide or N,N‐dimethylacrylamide perfluorocarbon acrylate copolymers in that they were found to be Newtonian at a low R_F content but dilatant at a higher comonomer content. © 2000 Society of Chemical Industry     

Esterification of wheat straw hemicelluloses in the N,N‐dimethylformamide/lithium chloride homogeneous system

The esterified hemicelluloses were prepared under homogeneous reaction conditions in the system N,N ‐dimethylformamide/lithium chloride by reacting the native hemicelluloses with various acyl chlorides (C₃—C₁₈) in the presence of 4‐dimethylaminopyridine as a catalyst and triethylamine as a base within 30 min at 70–75°C. The products obtained were characterized by means of Fourier transform IR chromatography, gel permeation chromatography, thermal analysis, and solubility. The degree of substitution of esterified hemicelluloses was controlled between 0.38 and 1.75 as a function of experimental conditions. Under an optimum reaction condition xylose unit/acyl chloride (molar ratio 1 : 3, tetraethylammonium % 160, 75°C, 30 min), about 95% hydroxyl groups in native hemicelluloses were esterified. The molecular weight measurements showed a minimal degradation and hydrolysis of the products. The thermal stability of the products was also increased by modification. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2301–2311, 1999     

Preparation of O‐hydroxypropyl‐N‐butyl chitosan under microwave irradiation

O‐Hydroxypropyl‐N‐butyl chitosan (C₄‐HPCS) was prepared by microwave irradiation and phase‐transfer catalysis; this consisted of two steps: (1) the synthesis of O‐hydroxypropyl chitosan (HPCS) with chitosan and propylene oxide and (2) the synthesis of C₄‐HPCS with HPCS and 1‐butyl bromide. The results of the experiment are as follows: Fourier transform infrared spectroscopy and ¹H‐NMR displayed the characteristic peaks of C₄‐HPCS, thermogravimetric analysis showed that C₄‐HPCS was stable until 240°C, the critical micelle concentration was 0.025 wt %, the surface tension was equal to 65.70 ± 0.09 mN/m, the hydrophile–lipophile balance number value was 13.55, and the emulsifying power, foaming expansion, and foaming volume stability were 73.10, 45, and 94 wt %, respectively. This indicated that C₄‐HPCS had superior surface performance and more excellent hydrophilicity. In addition, the microwave irradiation and phase‐transfer catalysis used in the experiment were considered to be more environmentally friendly and time‐saving methods. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41527.     

Synthesis and network parameters of hydrophobic poly(N‐[3‐(dimethylaminopropyl)]methacrylamide‐co‐lauryl acrylate) hydrogels

Hydrophobic poly(N‐[3‐(dimethylaminopropyl)]methacrylamide‐co‐lauryl acrylate) [P(DMAPMA‐co‐LA)] hydrogels with different LA content were synthesized by free‐radical crosslinking copolymerization of corresponding monomers in water by using N,N‐methylenebis(acrylamide) as the crosslinker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylethylenediamine as the activator. The swelling equilibrium of the hydrogels was investigated as a function of temperature and hydrophobic comonomer content in pure water. An interesting feature of the swelling behavior of the P(DMAPMA‐co‐LA) hydrogels with low LA content was the reshrinking phase transition where the hydrogels swell once and collapse as temperature was varied in the range of 30–40°C. The average molecular mass between crosslinks (M?_c) and polymer–solvent interaction parameter (χ) of the hydrogels were calculated from equilibrium swelling values. The enthalpy (ΔH) and entropy (ΔS) changes appearing in the χ parameter for the hydrogels were determined by using the Flory–Rehner theory based on the phantom network model of swelling equilibrium. The positive values for ΔH and ΔS indicated that the hydrogels had a positive temperature‐sensitive property in water, that is, swelling at a higher temperature and shrinking at a lower temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4159–4166, 2006     

Synthesis and Characterization of Cationic Surfactants Based on N‐Hexamethylenetetramine as Active Microfouling Agents

Four cationic surfactants of quaternary hexammonium silane chloride based on hexamethylenetetramine and alkyl chloride were synthesized. The chemical structures of the prepared cationic surfactants were elucidated using Fourier transform infrared (FT‐IR) spectroscopy and mass spectrometry analysis. The surface and thermodynamic properties of the prepared surfactants were also studied. The performance of these cationic surfactants as microfouling agents against two strains of Gram‐negative bacteria, namely, Pseudomonas aeruginosa and Escherichia coli, and two strains of Gram‐positive bacteria, namely, Staphylococcus aureus and Bacillus subtilis, were evaluated as antimicrobial agents. The results showed that the maximum antimicrobial activity was detected for N‐hexamethylenetetramine‐N‐ethyl silane ammonium trichloride (Ah). The maximum and minimum antimicrobial activities were 73 and 60 % against S. aureus and E. coli, respectively, at a concentration of 5 mg/l, pH 7, and 37 °C.     

Synthesis and characterization of optically active star‐shaped poly (N‐phenylmaleimide)s with a calixarene core

Two N‐phenylmaleimide derivatives bearing a chiral oxazoline group, N‐[o‐(4‐phenyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl]maleimide [(R)‐PhOPMI] and N‐[o‐(4‐isopropyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl]maleimide [(S)‐PrⁱOPMI], were polymerized using in situ generated calixarene‐based phenates as initiators to yield optically active polymers. The formation of star‐shaped architectures was strongly dependent on both polymerization conditions and calixarene moieties. In the case of polymerization conducted in toluene at 80–100 °C, the arm‐chain numbers achieved their respective maxima for the polymers with these multifunctional initiators. In contrast, the polymers obtained in polymerizations at lower temperature possessed fewer arm chains. The structure and chiroptical properties were investigated on the basis of ¹³C NMR, multiangular laser light scattering, gel permeation chromatography, and circular dichroism for the macromolecules with calixarene cores. Copyright © 2006 Society of Chemical Industry     

A Novel Alkyl Sulphobetaine Gemini Surfactant Based on S‐triazine: Synthesis and Properties

A series of alkyl sulphobetaine Gemini surfactants C_n‐GSBS (n = 8, 10, 12, 14, 16) was synthesized, using aliphatic amine, cyanuric chloride, ethylenediamine, N,N′‐dimethyl‐1,3‐propyldiamine and sodium 2‐chloroethane sulfonate as main raw materials. The chemical structures were confirmed by FT‐IR, ¹H NMR and elemental analysis. The Krafft points differ markedly with different carbon chain length, for C₈‐GSBS, C₁₀‐GSBS and C₁₂‐GSBS are considered to be below 0 °C and C₁₄‐GSBS, C₁₆‐GSBS are higher than 0 °C but lower than room temperature. Surface‐active properties were studied by surface tension and electrical conductivity. Critical micelle concentrations were much lower than dodecyl sulphobetaine (BS‐12) and decreased with increasing length of the carbon chain from 8 to 16, and can reach a minimum as low as 5 × 10^?5 mol L^?1 for C₁₆‐GSBS. Effects of carbon chain length and concentration of C_n‐GSBS on crude oil emulsion stability were also investigated and discussed.     

Wetting behaviour and direct observation of thermally responsive polystyrene‐block‐poly(N‐isopropylacrylamide)‐block‐polystyrene electrospun fibres in aqueous environment

Electrospun fibres of thermally responsive triblock copolymer polystyrene‐block‐poly(N‐isopropylacrylamide)‐block‐polystyrene were prepared. Fibre morphology and swelling were studied below and above the lower critical solution temperature of poly(N‐isopropylacrylamide) (PNIPAM) using cryo‐electron microscopy. Cryo‐transmission electron microscopy showed that the fibre diameter increased up to 150% after immersion in water at 20 °C. In contrast, at 45 °C the fibre diameter increased considerably less. The sessile drop technique was used to characterize temperature‐dependent wetting of fibre mats. Contact angle (θ_CA) measurements revealed that a block copolymer fibre mat changed from hydrophobic (θ_CA > 90°) to hydrophilic (θ_CA < 90°) state within seconds after applying a water droplet on it at 20 °C. At 40 °C the initial contact angle was measured to be higher (135°) and it decreased much less than at 20 °C during the first minute of measurement. We observed using scanning electron microscopy that the electrospun fibres of the block copolymer having 77 wt% of PNIPAM lost their cylindrical shape and changed from fibres to thin sheets at both 20 and 40 °C within seconds after applying water on the fibres. Fibres having 55 wt% of PNIPAM were observed to be stable in water at both 20 and 40 °C, which resulted, surprisingly, in fibre mats with the strongest effects on thermally sensitive wetting. We discuss the surprising results and the implications that the evolution of fibre surface roughness has on the long‐term wetting behaviour, demonstrating a self‐adaptable hydrophilicity/hydrophobicity nature of the fibre mats. © 2013 Society of Chemical Industry     

Synthesis and properties of polyamides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan

A new diamine 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan ( 3 ) was prepared through the nucleophilic displacement of 5,5′‐bis(4‐hydroxylphenyl)‐hexahydro‐4,7‐methanoindan ( 1 ) with p‐halonitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide (DMF), followed by catalytic reduction with hydrazine and Pd/C in ethanol. A series of new polyamides were synthesized by the direct polycondensation of diamine 3 with various aromatic dicarboxylic acids. The polymers were obtained in quantitative yields with inherent viscosities of 0.76–1.02 dl g⁻¹. All the polymers were soluble in aprotic dipolar solvents such as N,N‐dimethylacetamide (DMAc) and N‐methyl‐2‐pyrrolidone (NMP), and could be solution cast into transparent, flexible and tough films. The glass transition temperatures of the polyamides were in the range 245–282 °C; their 10% weight loss temperatures were above 468 °C in nitrogen and above 465 °C in air. © 2000 Society of Chemical Industry     

Swelling behavior of thermoreversible poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels

Thermoresponsive hydrogels based on N‐isopropylacrylamide and N‐vinylimidazole were synthesized, and their swelling–deswelling behavior was studied as a function of the total monomer concentration. For copolymeric structures with better thermoresponsive properties with respect to poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels, these hydrogels were protonated with HCl and HNO₃, and the copolymer behaviors were compared with those of the unprotonated hydrogels. The temperature was changed from 4 to 70°C at fixed pHs and total ionic strengths. The equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all the hydrogels. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1619–1624, 2004     

Synthesis,characterization and thermal degradation of dual temperature‐ and pH‐sensitive RAFT‐made copolymers of N,N‐(dimethylamino)ethyl methacrylate and methyl methacrylate

Poly{[(N,N‐(dimethylamino)ethyl methacrylate]‐co‐(methyl methacrylate)} copolymers of various compositions were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization at 70 °C in N,N‐dimethylformamide. The polymer molecular weights and molecular weight distributions were obtained from size exclusion chromatography, and they indicated the controlled nature of the RAFT polymerizations; the polydispersity indices are in the range 1.1–1.3. The reactivity ratios of N,N‐(dimethylamino)ethyl methacrylate (DMAEMA) and methyl methacrylate (MMA) (r_DMAEMA = 0.925 and r_MMA = 0.854) were computed by the extended Kelen–Tüdös method at high conversions, using compositions obtained from ¹H NMR. The pH‐ and temperature‐sensitive behaviour were studied in aqueous solution to confirm dual responsiveness of these copolymers. The thermal properties of the copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The kinetics of thermal degradation were determined by Friedmann and Chang techniques to evaluate various parameters such as the activation energy, the order and the frequency factor. © 2012 Society of Chemical Industry