Structure–property relationships of lightly chemical crosslinked poly(vinyl chloride) thermoplastic elastomer

Chemical crosslinked poly(vinyl chloride) (C‐PVC) was synthesized by vinyl chloride suspension polymerization in the presence of diallyl phthalate (DAP) and plasticized to prepare poly(vinyl chloride) (PVC) thermoplastic elastomer (TPE) materials. The chemical crosslinking and physical crosslinking structure in chemical crosslinked PVC‐TPE were investigated. It showed that the gel fraction and the crosslinking density of gel increased as the feed concentration of DAP increased. C‐PVC prepared by VC/DAP copolymerization was lightly crosslinked as compared with irradiation crosslinked PVC. Physical entanglements would greatly influence the crosslinking density of gel when the gel fraction was high. Chemical crosslinking had little influence on the recrystallization behavior of PVC. A structure model of chemical crosslinked PVC‐TPE was proposed, in which chemical networks acted with physical networks cooperatively. It also showed that chemical crosslinking and physical crosslinking influenced the processability and mechanical properties of chemical crosslinked PVC‐TPE cooperatively. Although the processability of PVC‐TPE deteriorated with chemical crosslinking, the dimension stability and elasticity of PVC‐TPE were improved as the permanent chemical networks were introduced. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 868–874, 2000     

Plastification of poly(vinyl chloride) by polymer blending

Blends of poly(vinyl chloride) (PVC) with different copolymers have been studied to obtain a plasticized PVC with improved properties and the absence of plasticizer migration. The copolymers used as plasticizers in the blends were acrylonitrile butadiene rubber, ethylene vinyl acetate (EVA), and ethylene-acrylic copolymer (E-Acry). Blends were studied with regard to their processing, miscibility, and mechanical properties, as a function of blend and copolymer composition. The results obtained were compared with those of equivalent compositions in the PVC/dioctyl phthalate (DOP) system. Better results than PVC/DOP were obtained for PVC/acrylonitrile butadiene rubber blends. The plasticizing effect on PVC of EVA and E-Acry copolymers was similar to that of DOP. It is shown that crosslinking PVC/E-Acry blends or increasing the vinyl acetate content in PVC/EVA blends, are alternatives that can increase the compatibility and mechanical properties of these blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1303–1312, 2000     

Self‐crosslinking and cocrosslinking with nitrile rubber of poly(vinyl chloride) with pendent N,N‐diethyldithiocarbamate group

In order to realize the self‐crosslinking and cocrosslinking of poly(vinyl chloride) (PVC) with nitrile‐butadiene rubber (NBR), PVC with pendent N,N‐diethyldithiocarbamate groups (PVC‐SR) was prepared from the reaction of PVC with sodium SR in butanone. The PVC‐SR was self‐crosslinked and the PVC‐SR/NBR blend was cocrosslinked under heating at 170°C. The effect of the degree of functionality of PVC‐SR on the torque, gel content, glass‐transition temperature, and tensile properties was investigated. The results showed that the crosslinking reaction did not occur for PVC, NBR, or the PVC/NBR blend. Introducing the SR groups into PVC caused the crosslinking reaction to occur and the high gel contents of the crosslinked samples were obtained in 15 min. The degree of crosslinking increased with the degree of functionality of PVC‐SR. The mechanism of the crosslinking reaction was discussed. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 634–638, 2001     

Poly(vinyl alcohol)‐g‐lactic acid copolymers and films with silver nanoparticles

Poly(vinyl alcohol) (PVA), a well‐known synthetic biodegradable, biocompatible, and hydrophilic polymer is susceptible to several structural modifications, due to the presence of hydroxyl groups in its backbone. PVA was grafted with L (+)‐lactic acid (LA) in molar ratios VA/LA (1/1, 1.5/1, and 2.2/1), manganese acetate as catalyst, by solution polycondensation procedure, resulting the poly(vinyl alcohol)‐g‐lactic acid copolymers. Aqueous solutions of copolymers with glycerol as plasticizer, silver nanoparticles (Ag^o), and sodium tetraborate as crosslinking agent were used for films casting. The copolymers were characterized by FTIR and ¹H RMN spectroscopy, gel permeation chromatography, thermal analyses (DTG and DSC), silver particles size, while films were characterized by mechanical properties and mechanodynamic analyses. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Binary blends of poly(vinyl chloride) stabilized by lithium acetate‐thermal studies

A series of blends of poly(vinyl chloride) (PVC) with (1) poly(methyl methacrylate) (PMMA) or (2) polyoxymethylene (POM), with lithium acetate as a stabilizing agent, was investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), either alone or coupled with Fourier transform infrared (FTIR) spectroscopy. It was found that lithium acetate has a significant effect on the thermal properties of blends under investigation. It causes the initial decomposition temperatures to increase by about 60–150°C for PVC–POM blends, a substantial suppression of the volatile products evolution for PVC/PMMA blends, and an improvement in the surface morphology for both polymer systems by lowering the degree of roughness. The origin of these effects was discussed by analysis of the intermolecular complexation between metal salt and PVC structural arrangements in the blends. Such interactions may lead to the formation of long‐range, directional‐specific structural regularities, which in turn thermally stabilize the whole system (strong interactions model). © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2576–2587, 1999     

Self‐association through hydrogen bonding and sequence distribution in poly(vinyl acetate‐co‐vinyl alcohol) copolymers

Correlation between hydrogen‐bonding self‐association and sequence distribution in poly(vinyl acetate‐co‐vinyl alcohol) copolymers (ACA) with different degrees of basic hydrolysis and sequence distributions has been studied by thermal analysis and NMR spectroscopy. ¹³C NMR spectroscopy has also been used to elucidate the blocky nature, branching, and tacticity of the copolymers. Thermal analytical studies indicate that hydrogen bonding distribution in block alcohol and vinyl acetate copolymers strongly depend on the sequence distribution wherein hydroxyl–hydroxyl self‐association is preferred. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 123–133, 1999     

Epoxylsilane crosslinking of rigid poly(vinyl chloride)

Crosslinking is an effective way to improve the qualities of poly(vinyl chloride). A crosslinking system consisting of R‐glycidoxypropyltrimethoxysilane (KH560) has been first used to introduce crosslinking into rigid poly(vinyl chloride). Different thermal stabilizers (organotin, Ca/Zn stearate, and Ba/Zn stearate) as well as sodium bisulfite additive were tried to promote the grafting of epoxyl group and enhance the degree of crosslinking. FTIR spectra showed that grafting and crosslinking of KH560 with poly(vinyl chloride) could take place, and a gel content of 40% could be obtained when more than 10 phr epoxylsilanes were used in the condition of 2 : 1 (parts by weight) ratio of BaSt₂/ZnSt₂ and 1 : 1M ratio of NaHSO₃/KH560, while the premature crosslinking was avoided. Thermal properties had been studied. The results showed that the Vicat softening temperature of crosslinked PVC could be improved about 10°C when 5 phr epoxylsilane was added, and thermal degradation could be delayed with increase in gel content. Therefore, epoxylsilane‐crosslinked PVC will have the potential for extensive applications © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Effects of poly(vinyl acetate) and poly(vinyl chloride‐co‐vinyl acetate) low‐profile additives on properties of cured unsaturated polyester resins. II. glass‐transition temperatures and mechanical properties

Three series of self‐synthesized poly(vinyl acetate)‐based low‐profile additives (LPAs), including poly(vinyl acetate), poly(vinyl chloride‐co‐vinyl acetate), and poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride), with different chemical structures and molecular weights were studied. Their effects on the glass‐transition temperatures and mechanical properties for thermoset polymer blends made from styrene, unsaturated polyester, and LPAs were investigated by an integrated approach of the static phase characteristics, cured sample morphology, reaction kinetics, and property measurements. Based on Takayanagi mechanical models, the factors that control the glass‐transition temperature in each phase region of the cured samples and the mechanical properties are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3347–3357, 2003     

Cold plasma surface modification of conventionally and nonconventionally plasticized poly(vinyl chloride)‐based flexible films: Global and specific migration of additives into isooctane

The effect of plasma‐induced surface crosslinking of poly(vinyl chloride) (PVC)‐based flexible films was investigated to limit its migration from packaging into fatty foodstuffs. The global migration was monitored by immersion into isooctane and the specific migrations of di‐2‐ethylhexyladipate (DEHA) and epoxidized soybean oil (ESO) were monitored by supercritical fluid chromatography analysis of the resulting isooctane solution. The plasma induced modifications were monitored with respect to the surface energy, weight loss, and surface crosslinking. The global migration from conventionally plasticized film, whose composition corresponds to an ordinarily used formulation for the manufacture of PVC wrap films, was controlled by different plasma treatments and the best results were obtained with Ar plasma. Further decreases in global migration were obtained by treating permanently plasticized films containing an elastomeric ethylene‐based terpolymer (EE) in complete or partial replacement of DEHA. Before treatment, the replacement of DEHA with EE increased the DEHA and ESO specific migrations. Argon plasma treatment of permanently plasticized films led to samples that did not exhibit any migration. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1384–1393, 2001     

Crosslinking of plasticized poly(vinyl chloride) by substitution and free radical reaction

Two new methods to obtain crosslinking plasticized poly(vinyl chloride) (PVC) are shown. One is by the substitution reaction of PVC with the sodium salt of γ-mercaptopropyl trimetoxysilane and the other is by the free-radical reaction of azide-modified PVC with γ-acryloxypropyltrimetoxysilane and vinyltri(2-metoxyetoxy)silane. The content of gel and the number average molecular weight between crosslinking (M_c) were determined by Soxhlet extraction and by using the Flory-Rehner equation. The reactions of PVC with the above organosilanes under normal processing conditions of the polymer lead to high gel contents and, therefore, low M_c. The ultimate tensile strength and elongation at break at 110°C of these polymers are greatly enhanced over those of the uncrosslinked polymer. The results are improved compared to those taken from literature for similar systems. © 1996 John Wiley & Sons, Inc.     

Poly(vinyl chloride) films plasticized with novel poly‐nadic‐anhydride polyester plasticizers

In this work, several novel poly‐nadic‐anhydride polyester plasticizers were developed to be used in poly(vinyl chloride) (PVC) film fabrication for the first time. Mechanical properties of the films, the compatibility of plasticizers in PVC resin, as well as testing of migration of the plasticizers, were performed in order to evaluate the efficiency of plasticization. Scanning electron microscopy, Fourier‐transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry were used to characterize the unplasticized and plasticized polymer. The results demonstrated that the as‐prepared poly‐nadic‐anhydride plasticized PVC film significantly improved the plasticization efficiency of PVC film based on the increase in the break in elongation of the films. According to scanning electron microscopy analysis, the poly‐nadic‐anhydride polyester plasticizers presented good compatibility with PVC resin. In volatility and extraction tests, PVC films plasticized with the poly‐nadic‐anhydrides showed enhanced migration resistance. The plasticizing effects induced by the poly‐nadic‐anhydride polyester plasticizers were also confirmed by a glass transition temperature shift toward lower temperatures in the plasticized films. J. VINYL ADDIT. TECHNOL., 23:321–328, 2017. © 2015 Society of Plastics Engineers     

Preparation of marked poly(vinyl chloride) by reactive processing for identification by UV devices (recycling)

The grafting of sodium 2-thionaphtholate (NaTN) and sodium p-thiocresolate (NaTC) in poly(vinyl chloride) (PVC) has been studied in the melt with the aim of obtaining a marked polymer for easy recognition and separation by UV devices. The influence of reactant concentration. DOP concentration, and temperature was investigated to determine the best conditions to obtain a controlled modification in the polymer. High degrees of grafting, efficiencies > 80%, and no side reactions, such as degradation or crosslinking, have been obtained under polymer processing conditions. The reaction of PVC with both reactants is also stereospecific. The ultraviolet spectrum of p-thiocresolate grafted PVC shows a maximum absorption in the region < 300 nm, and that of a 2% thionaphtholate grafted PVC in the region of 360 nm, which is far from the UV absorption of a plasticized PVC. While the polymer marked with the first reagent can be used without plasticized polymers, the second can also be used with plasticized PVC, and therefore distinguished from polyolefins. The results reported herein may be useful in the development of polymer recycling, although barriers and interferences can exist.     

Chemical recycling of poly(vinyl chloride): Application of partially dehydrochlorinated poly(vinyl chloride) for producing a chemically modified polymer

Poly(vinyl chloride) (PVC) pipes were chemically modified to produce a sulfonated polymer with dehydrochlorinated PVC samples as intermediates. Two intermediates were formed: (1) partially dehydrochlorinated PVC with long sequences of conjugated double bonds and (2) the product of the partial dehydrochlorination of PVC and the nucleophilic substitution of chlorine by hydroxyl groups. The IR spectra showed that the dehydrochlorinated samples were heterogeneous materials, showing different proportions of elimination products, hydroxyl substitution, and partial oxidation. Samples dehydrochlorinated with poly(ethylene glycol) with a molecular weight of 400 g/mol for 24 h and 15 min showed the highest sulfonation yield, which was related to the sulfonation mechanism occurring predominantly because of the presence of hydroxyl groups in a mixture of vinyl alcohol and vinyl chloride units. The sulfonation was confirmed by the presence of a medium‐intensity band at 1180 cm^?1, assigned to sulfonic groups. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Physicochemical characterization of hydrogels based on polyvinyl alcohol–vinyl acetate blends

Hydrogels made of polyvinyl alcohol–vinyl acetate and its blends with water soluble polymer were studied in terms of swelling behavior, microstructure, and dynamic mechanical properties. Hydrogels prepared by blending polyvinyl alcohol–vinyl acetate with either polyacrylic acid or poly(4‐vinyl pyridine) exhibited a strong pH dependency. When poly(vinyl pyrrolidone) was used for blending, an unusual pH dependency was observed. An increase in the equilibrium water content in all systems resulted in an increase in the freezable water as determined by DSC. Critical point drying led to a striated surface on polyacrylic acid–polyvinyl alcohol–vinyl acetate hydrogels, whereas a porous structure was observed on the freeze‐dried poly(vinyl pyrrolidone)–polyvinyl alcohol–vinyl acetate gels. Hydrogels with elevated storage modulus were obtained when either polyvinyl alcohol–vinyl acetate alone or polyacrylic acid–polyvinyl alcohol–vinyl acetate blends were thermally treated at high temperatures (i.e., 150°C). Low storage modulus was observed for both poly(vinyl pyrrolidone) and poly(4‐vinyl pyridine)‐containing hydrogels. Temperature dependency of storage modulus from 20 to 60°C was observed only for poly(4‐vinyl pyridine)–polyvinyl alcohol–vinyl acetate hydrogels. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3578–3590, 2001     

Rheological behavior and thermal properties of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate)‐grafted vinyl chloride resin

The rheological behavior and thermal properties of a poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) [P(BA‐EHA)]‐grafted vinyl chloride (VC) composite resin [P(BA‐EHA)/poly(vinyl chloride) (PVC)] and its materials were investigated. The rheological behavior, thermal stability, and Vicat softening temperature (VST) of P(BA‐EHA)/PVC were measured with capillary rheometry, thermal analysis, and VST testing, respectively. The effects of the P(BA‐EHA) content and the polymerization temperature of grafted VC on the rheological behavior of the composite resin were examined. The weight loss of the composite resin and its extracted remainder via heating were analyzed. The influence of the content and crosslinking degree of P(BA‐EHA) and the polymerization temperature of the grafted VC on VST of the materials was determined. The results indicated the pseudoplastic‐flow nature of the composite resin. The flow property of the modified PVC resin was improved because of the incorporation of the acrylate polymer. The molecular weight of PVC greatly influenced the flow behavior and VST of the composite resin and its materials. The flowability of the composite resin markedly increased, and the VST of its materials decreased as the polymerization temperature of the grafted VC increased. The initial degradation temperature of the composite resin increased as the P(BA‐EHA) content increased. The VST of the samples was enhanced a little as the content of the crosslinking agent increased in P(BA‐EHA). As expected, the composite resin, with good impact resistance, had better heating stability and flowability than pure PVC, whereas the VST of the material decreased little with increasing P(BA‐EHA) content. Therefore, P(BA‐EHA)/PVC resins prepared by seeded emulsion polymerization have excellent potential for widespread applications. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 419–426, 2005     

Palm oil‐based compound as environmentally friendly plasticizer for poly(vinyl chloride)

Many plasticizers have been invented to serve the purpose of making poly(vinyl chloride) (PVC) into a more flexible plastic. In this work, the potential of palm oil‐based compound (Palm1) as a polymeric plasticizer for PVC was investigated. Plasticization of PVC was conducted via the solvent casting technique, using tetrahydrofuran (THF) as the mutual solvent. Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) were used to find evidence of interactions between the plasticizer and PVC. Transition temperatures (T_gs) of the plasticized PVC were obtained using DSC, and their thermal stabilities were evaluated using a thermogravimetric analyzer (TGA). Results from the study show that the polymeric plasticizer could interact with PVC chains via polar interaction involving –C‐Cl of PVC and possibly the ‐OH groups of Palm1. T_g of the PVC was reduced after it was plasticized with Palm1. The results obtained from this study suggest that the Palm1 may have the potential to serve as an environmentally friendly plasticizer for PVC. J. VINYL ADDIT. TECHNOL., 22:80–87, 2016. © 2014 Society of Plastics Engineers     

Dehydration of water‐plasticized poly(vinyl alcohol) systems: particular behavior of isothermal mass transfer

BACKGROUND: Water‐plasticized poly(vinyl alcohol) has been obtained by thermal processing. Dehydration is the key process for controlling the structure and performance of the water‐soluble polymer, and mass transfer is an important part of dehydration. RESULTS: A simple new model of a hyperbolic‐type function was developed to understand the mass transfer process of water‐plasticized poly(vinyl alcohol) systems during isothermal dehydration. The model was verified by statistical tests. The physical parameters in the model were defined as the maximum weight loss fraction and characteristic time. The dehydration rate, the key physical parameter in mass transfer, was obtained from the differential equation of the model. By use of the model, the characteristics of dehydration of poly(vinyl alcohol) were determined: the complete mass transfer process can be divided into a fast mass transfer before a characteristic time (τ) and a slow mass transfer after τ, and dehydration temperatures can also be divided into two intervals by different activation energies. In addition, the dehydration rate is inversely proportional to the degree of crystallinity. CONCLUSION: The results of the new model agree reasonably well with experimental results obtained by thermogravimetry and weighing. Poly(vinyl alcohol), as a water‐soluble semicrystalline polymer, exhibits a particular mass transfer behavior during dehydration. Copyright © 2008 Society of Chemical Industry     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006     

Thermal and rheological properties of poly(vinyl alcohol) gel with boric acid as a crosslinking agent

The gel of poly(vinyl alcohol) polymer with boric acid, added as a crosslinking agent, was made with a mixture of dimethyl sulfoxide and water. The thermal and dynamic modulus properties of poly(vinyl alcohol) gel were measured by a differential scanning calorimeter and a dynamic mechanical thermoanalyst. Results show that an increase of poly(vinyl alcohol) polymer or boric acid content to the gel makes an increasing of gel to sol transition temperature, endothermic enthalpy, and dynamic modulus. The maximum value of gel to sol transition temperature, endothermic enthalpy, and dynamic modulus happened at the volume ratio of 6 : 4 of dimethyl sulfoxide to water, which is independent on the poly(vinyl alcohol) and the boric acid content. According to the modified Eldridge–Ferry theory for thermoreversible gel, it is found that both the gel to sol transition temperature and the endothermic enthalpy versus poly(vinyl alcohol) content could be superimposed with respect to the boric acid content. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2219–2226, 1999     

N‐phenyl‐3‐substituted 5‐pyrazolone derivatives as organic stabilizers for rigid poly(vinyl chloride) against photodegradation

N‐Phenyl‐3‐substituted 5‐pyrazolone derivatives were investigated as organic photostabilizers for rigid poly(vinyl chloride) (PVC). Their stabilizing efficiency was evaluated by the determination of the weight loss of the polymer after irradiation for different periods and by the determination of the amount of gel formation as well as the intrinsic viscosity of the soluble fraction of the degraded polymer. Moreover, the efficiency was evaluated from the extent of the discoloration of the degraded polymer. This was attributed not only to the radical trapping potency of the pyrazolone derivatives, which intervened with the radical degradation species in the degradation process of PVC, but also to the blocking of the newly formed radical sites on the polymeric chains. Their stabilizing efficiencies were compared with those of phenyl salicylate and 2‐hydroxy‐4‐(octyloxy)phenyl benzophenone, industrially known UV absorbers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1543–1555, 2006