Kinetics for copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

The kinetics for the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) was investigated. The initial copolymerization rate R_p is proportional to the initiator concentration to the power of 0.54. The apparent activation energy of the overall copolymerization was measured to be 69.0 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.42 and r_MMA = 1.63. R_p reduces slightly, and the molecular weight of the resultant copolymer decreases with increasing the concentration of the chain transfer agent N‐dodecanethiol (RSH). The more the transfer agent, the narrower the molecular weight distribution of the resulting copolymer. The following chain‐transfer constant of RSH for the copolymerization of MMA with NCMI in benzene at 50°C was obtained: C_s = 0.23. The glass transition temperature (T_g) of the copolymer increases with increasing f_NCMI, which indicates that adding NCMI can improve the heat resistance of Plexiglas. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1293–1297, 1999     

Hyperbranched copolymers of p‐(chloromethyl)styrene and N‐cyclohexylmaleimide synthesized by atom transfer radical polymerization

The hyperbranched copolymers were obtained by the atom transfer radical copolymerization of p‐(chloromethyl)styrene (CMS) with N‐cyclohexylmaleimide (NCMI) catalyzed by CuCl/2,2′‐bipyridine (bpy) in cyclohexanone (C₆H₁₀O) or anisole (PhOCH₃) with CMS as the inimer. The influences of several factors, such as temperature, solvent, the concentration of CuCl and bpy, and monomer ratio, on the copolymerization were subsequently investigated. The apparent enthalpy of activation for the overall copolymerization was measured to be 37.2 kJ/mol. The fractional orders obtained in the copolymerization were approximately 0.843 and 0.447 for [CuCl]₀ and [bpy]₀, respectively. The monomer reactivity ratios were evaluated to be r_NCMI = 0.107 and r_CMS = 0.136. The glass transition temperature of the resultant hyperbranched copolymer increases with increasing f_NCMI, which indicates that the heat resistance of the copolymer has been improved by increasing NCMI. The prepared hyperbranched CMS/NCMI copolymers were used as macroinitiators for the solution polymerization of styrene to yield star‐shaped poly(CMS‐co‐NCMI)/polystyrene block copolymers by atom transfer radical polymerization. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1992–1997, 2000     

Atom transfer radical copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

Atom transfer radical polymerization has been applied to simultaneously copolymerize methyl methacrylate (MMA) and N‐cyclohexylmaleimide (NCMI). Molecular weight behaviour and kinetic study on the copolymerization with the CuBr/bipyridine(bpy) catalyst system in anisole indicate that MMA/NCMI copolymerization behaves in a ‘living’ fashion. The influence of several factors, such as temperature, solvent, initiator and monomer ratio, on the copolymerization were investigated. Copolymerization of MMA and NCMI in the presence of CuBr/bpy using cyclohexanone as a solvent instead of anisole displayed poor control. The monomer reactivity ratios were evaluated as r_NCMI = 0.26 and r_MMA=1.35. The glass transition temperature of the resulting copolymer increases with increasing NCMI concentration. The thermal stability of plexiglass could be improved through copolymerization with NCMI. © 2000 Society of Chemical Industry     

Copolymerization of butadiene with styrene using a rare‐earth metal compound – dialkylmagnesium – halohydrocarbon catalytic system

Copolymerizations of butadiene (Bd) with styrene (St) were carried out with catalytic systems composed of a rare‐earth compound, Mg(n‐Bu)₂ (di‐n‐butyl magnesium) and halohydrocarbon. Of all the rare earth catalysts examined, Nd(P₅₀₇)₃–Mg(n‐Bu)₂–CHCl₃ showed a high activity in the copolymerization under certain conditions: [Bd] = [St] = 1.8 mol l^?1, [Nd] = 6.0 × 10^?3 mol l^?1, Mg/Nd = 10, Cl/Nd = 10 (molar ratio), ageing for 2 h, copolymerization at 50 °C for 6–20 h. The copolymer of butadiene and styrene obtained has a relatively high styrene content (10–30 mol%), cis‐1,4 content in butadiene unit (85–90%), and molecular weight ([η] = 0.8–1 dL g^?1). Monomer reactivity ratios were estimated to be r_Bd = 36 and r_St = 0.36 in the copolymerization. © 2002 Society of Chemical Industry     

Several features of vinyl chloride–diallyl phthalate suspension copolymerization

Vinyl chloride–diallyl phthalate (VC–DAP) suspension copolymerization was carried out in a 5‐L autoclave and 200‐mL stainless steel vessel at 45°C. The apparent reactivity ratios of VC–DAP suspension copolymerization system were calculated as r_VC = 0.77 and r_DAP = 0.37. It shows that VC–DAP copolymer contains no gel when the feed concentration of DAP (f) is lower than a critical concentration (f_cr, inside the range of 0.466–0.493 mmol/mol VC at 80–85% conversion), the polymerization degree (DP) of copolymer increases with the increase of f and conversion. VC–DAP copolymer is composed of gel and sol fractions when f is larger than f_cr. The DP of sol fraction decreases as f increases, but the gel content and the crosslinking density of gel increase. The gel content also increases as conversion increases. The results also show that the index of polydispersity of molecular weight of sol changes with f, a maximum value appears when f is close to f_cr. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 156–162, 2000     

Spontaneous copolymerization of N‐butyl maleimide and ethyl α‐phenyl acrylate with high alternating tendency

The copolymerization of N‐butyl maleimide (BMI) and ethyl α‐phenyl acrylate (EPA) was successfully carried out without an initiator. A high alternating tendency was observed. The Q, e values were derived by Alfrey–Price equations: Q = 0.09, e = 0.81 for BMI and Q = 0.21, e = ?0.5 for EPA, and the monomer reactivity ratios were r_BMI = 0.15 ± 0.01 and r_EPA = 0.18 ± 0.08, respectively. In this system BMI was donor and EPA was acceptor. The maximum copolymerization rate and molecular weight appeared at 70 mol % (BMI) in the feed ratio. The spontaneous alternating copolymerization was considered to be completed by a contact‐type charge‐transfer complex formed by the monomer pairs. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 355–360, 2004     

Synthesis of poly[(2‐oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether‐co‐N‐phenylmaleimide] and its miscibility in blends with styrene‐acrylonitrile or poly(vinyl chloride)

The aim of the study was to investigate the synthesis of a copolymer bearing cyclic carbonate and its miscibility with styrene/acrylonitrile copolymer (SAN) or poly(vinyl chloride) (PVC). (2‐Oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether (OVE) as a monomer was synthesized from glycidyl vinyl ether and CO₂ using quaternary ammonium chloride salts as catalysts. The highest reaction rate was observed when tetraoctylammonium chloride (TOAC) was used as a catalyst. Even at the atmospheric pressure of CO₂, the yield of OVE using TOAC was above 80% after 6 h of reaction at 80°C. The copolymer of OVE and N‐phenylmaleimide (NPM) was prepared by radical copolymerization and was characterized by FTIR and ¹H‐NMR spectroscopies and differential scanning calorimetry (DSC). The monomer reactivity ratios were given as r₁ (OVE) = 0.53–0.57 and r₂ (NPM) = 2.23–2.24 in the copolymerization of OVE and NPM. The films of poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were cast from N‐dimethylformamide. An optical clarity test and DSC analysis showed that poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were both miscible over the whole composition range. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1809–1815, 2000     

Free radical copolymerization of N,N‐dimethylaminoethyl methacrylate with styrene and methyl methacrylate: monomer reactivity ratios and glass transition temperatures

BACKGROUND: The properties of copolymers depend strongly on their composition; therefore in order to tailor some for specific applications, it is necessary to control their synthesis, and, in particular, to know the reactivity ratios of their constituent monomers. Free radical copolymerizations of N,N‐dimethylaminoethyl methacrylate (DMAEM) with styrene (ST) and methyl methacrylate (MMA) in toluene solution using 1‐di(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane as initiator at 70 °C were investigated. Monomer reactivity ratios were determined for low conversions using both linear and nonlinear methods. RESULTS: For the DMAEM/ST system the average values are r₁ = 0.43 and r₂ = 1.74; for the DMAEM/MMA system the average values are r₁ = 0.85 and r₂ = 0.86. The initial copolymerization rate, R_p, for DMAEM/ST sharply decreases as the content of ST in the monomer mixture increases up to 30 mol% and then attains a steady value. For the DMAEM/MMA copolymerization system the composition of the feed does not have a significant influence on R_p. The glass transition temperatures (T_g) of the copolymers were determined calorimetrically and calculated using Johnston's sequence length method. A linear dependence of T_g on copolymer composition for both systems is observed: T_g increases with increasing ST or MMA content. CONCLUSION: Copolymerization reactivity ratios enable the design of high‐conversion processes for the production of copolymers of well‐defined properties for particular applications, such as the improvement of rheological properties of lubricating mineral oils. Copyright © 2009 Society of Chemical Industry     

Copolymerization and thermal behavior of methyl methacrylate with N‐(phenyl/p‐tolyl) itaconimides

This study describes the synthesis, characterization, and thermal behavior of copolymers of methyl methacrylate (MMA) and N‐p‐tolyl itaconimide (PTI)/N‐phenyl itaconimide (I). Homopolymerization and copolymerization of N‐(phenyl/p‐tolyl) itaconimide with MMA was carried out by use of various mole fractions of N‐aryl itaconimide in the initial feed from 0.1 to 0.5, using azobisisobutyronitrile as an initiator and tetrahydrofuran as the solvent. The copolymer composition was determined by ¹H‐NMR spectroscopy using the proton resonance signals attributed to –OCH₃ of MMA (δ = 3.5–3.8 ppm) and the aromatic protons (δ = 7.0–7.5 ppm) of N‐aryl itaconimide. The reactivity ratios of the monomers were found to be r₁ (PTI) = 1.33 ± 0.05/r₂ (MMA) = 0.24 ± 0.03 and r₁ (I) = 1.465 ± 0.035/r₂ (MMA) = 0.385 ± 0.005. The molecular weight of the copolymers decreased with increasing mole fraction of N‐aryl itaconimide in the copolymers. Glass‐transition temperature (T_g) and thermal stability of PMMA increased with increasing amounts of itaconimides in the polymer backbone. A significant increase in the percentage char yield at 700°C was observed on incorporation of a low mole fraction of N‐aryl itaconimides. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1195–1202, 2003     

Synthesis and solution properties of alternating maleimide/styrene hyperbranched copolymers via controlled radical mechanism

Copolymerizations of (N,N‐diethyldithiocarbamyl)methylstyrene (inimer: DTCS) with maleimide (MI) were carried out under UV irradiation. DTCS monomers play an important role in this copolymerization system as an inimer that is capable of initiating radical polymerization of the vinyl group. Reactivity ratios (r₁ = 0.15 and r₂ = 0) were estimated by the curve‐fitting procedure (DTCS [M₁]; MI[M₂]). These reactivities show strong alternation, and the propagating copolymer radicals proceed with homopolymerization of 1:1 complexes formed between the donor and acceptor monomers. These alternating copolymers exhibit highly branched structure and are actually hyperbranched copolymers. The compact nature of the hyperbranched molecules was demonstrated by comparison of their dilute‐solution properties with those of the linear analogues. The hyperbranched macromolecules behave as single, well‐separated molecules (even in good solvent) and as hard spheres. Copyright © 2003 Society of Chemical Industry     

Reactivity ratios and copolymer properties of 2‐(diisopropylamino)ethyl methacrylate with methyl methacrylate and styrene

Free radical copolymerization kinetics of 2‐(diisopropylamino)ethyl methacrylate (DPA) with styrene (ST) or methyl methacrylate (MMA) was investigated and the corresponding copolymers obtained were characterized. Polymerization was performed using tert‐butylperoxy‐2‐ethylhexanoate (0.01 mol dm^?3) as initiator, isothermally (70 °C) to low conversions (<10 wt%) in a wide range of copolymer compositions (10 mol% steps). The reactivity ratios of the monomers were calculated using linear Kelen–Tüd?s (KT) and nonlinear Tidwell–Mortimer (TM) methods. The reactivity ratios for MMA/DPA were found to be r₁ = 0.99 and r₂ = 1.00 (KT), r₁ = 0.99 and r₂ = 1.03 (TM); for the ST/DPA system r₁ = 2.74, r₂ = 0.54 (KT) and r₁ = 2.48, r₂ = 0.49 (TM). It can be concluded that copolymerization of MMA with DPA is ideal while copolymerization of ST with DPA has a small but noticeable tendency for block copolymer building. The probabilities for formations of dyad and triad monomer sequences dependent on monomer compositions were calculated from the obtained reactivity ratios. The molar mass distribution, thermal stability and glass transition temperatures of synthesized copolymers were determined. Hydrophobicity of copolymers depending on the composition was determined using contact angle measurements, decreasing from hydrophobic polystyrene and poly(methyl methacrylate) to hydrophilic DPA. Copolymerization reactivity ratios are crucial for the control of copolymer structural properties and conversion heterogeneity that greatly influence the applications of copolymers as rheology modifiers of lubricating oils or in drug delivery systems. © 2015 Society of Chemical Industry     

Properties of PHMS‐g‐p [butylacrylate (BA)‐N‐hydroxyl‐methyl acrylamide (NMA)] graft copolymer emulsions

Emulsion graft copolymerization of poly(hydrogenmethylsiloxane) (PHMS) and butyl acrylate (BA) in the presence of functional comonomer N‐hydroxyl‐methyl acrylamide (NMA) was conducted by batch emulsion copolymerization to modify the properties of polysiloxane. Morphology of graft copolymer particles was characterized by transmission electron microscopy. The effect of polymerization method, PHMS content, initiator concentration, and NMA content on stability of emulsion, morphology, size of particle, and rheological properties were investigated. It has been found that stability of emulsion is better by semicontinuous emulsion polymerization than that of batch emulsion polymerization and it increased with increasing PHMS‐NMA concentration. Increasing PHMS concentration and NMA concentration, the particle size and the viscosities increase. The property of resistance to electrolytes of graft copolymer emulsions and swelling property of film were also discussed. Results showed PHMS‐g‐P [butylacrylate (BA)‐N‐hydroxyl‐methyl acrylamide (NMA)] graft copolymer emulsion has good resistance to electrolytes and the water absorption of its film increases with increasing BA‐NMA content grafted onto PHMS. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2209–2217, 1999     

Conventional and RAFT radical copolymerizations of β‐pinene with N‐substituted maleimides

The feasibility of the radical copolymerizations of β‐pinene with three N‐substituted maleimides, i.e. N‐phenylmaleimide (PhMI), N‐methylmaleimide (MeMI), and N‐ethylmaleimide (EtMI), was clarified for the first time. The copolymerization rates decreased in the order PhMI > MeMI > EtMI. A marked penultimate effect on the activity of the N‐substituted maleimide‐terminated radicals was found in these copolymerizations. The penultimate monomer reactivity ratios evaluated by the nonlinear method were r₁ = 0.10, r′₁ = 8.30, r₂ = r′₂ = 0 for PhMI–β‐pinene, r₁ = 0.20, r′₁ = 7.09, r₂ = r′₂ = 0 for MeMI–β‐pinene, and r₁ = 0.16, r′₁ = 6.50, r₂ = r′₂ = 0 for EtMI–β‐pinene. Furthermore, the possible controlled copolymerizations of β‐pinene and N‐substituted maleimides were then attempted via the reversible addition‐fragmentation chain transfer (RAFT) technique. In the presence of RAFT agent 1‐phenylethyl phenyldithioacetate, the copolymerization of β‐pinene with MeMI or EtMI was retarded severely. However, much smaller retardation was observed in the RAFT copolymerization of β‐pinene with PhMI, and, more importantly, the copolymerization exhibited typical features of a controlled system. The solvent effect on the RAFT copolymerization of β‐pinene and PhMI was also investigated using matrix‐assisted laser desorption ionization time‐of‐fight mass spectrometry (MALDI‐TOF‐MS) analysis. The results clearly indicated that copolymerization in tetrahydrofuran suffered from competitive transfer and termination side‐reactions arising from the solvent in spite of the presence of the RAFT agent. Copyright © 2007 Society of Chemical Industry     

Copolymerization of N‐aryl substituted itaconimide with methyl methacrylate: Effect of substituents on monomer reactivity ratio and thermal behavior

The article describes the synthesis and characterization of N‐(4‐methoxy‐3‐chlorophenyl) itaconimide (MCPI) and N‐(2‐methoxy‐5‐chlorophenyl) itaconimide (OMCPI) obtained by reacting itaconic anhydride with 4‐methoxy‐3‐chloroanisidine and 2‐methoxy‐5‐chloroanisidine, respectively. Structural and thermal characterization of MCPI and OMCPI monomers was done by using ¹H NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of MCPI or OMCPI with methyl methacrylate (MMA) in solution was carried out at 60°C using AIBN as an initiator and THF as solvent. Feed compositions having varying mole fractions of MCPI and OMCPI ranging from 0.1 to 0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by FTIR, ¹H NMR, and elemental analysis and percent nitrogen content was used to calculate the copolymer composition. The monomer reactivity ratios for MMA–MCPI copolymers were found to be r₁ (MMA) = 0.32 ± 0.03 and r₂ (MCPI) = 1.54 ± 0.05 and that for MMA–OMCPI copolymers were r₁ (MMA) = 0.15 ± 0.02 and r₂ (OMCPI) = 1.23 ± 0.18. The intrinsic viscosity [η] of the copolymers decreased with increasing mole fraction of MCPI/or OMCPI. The glass transition temperature as determined from DSC scans was found to increase with increasing amounts of OMPCI in copolymers. A significant improvement in the char yield as determined by thermogravimetry was observed upon copolymerization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2391–2398, 2006     

Emulsion copolymerization of tetrafluoroethylene with ω‐chlorotetrafluoroethyltrifluorovinyl ether and the synthesized copolymer properties

Emulsion copolymerization of ω‐chlorotetrafluoroethyltrifluorovinyl ether (Cl(CF₂)₂OCF = CF₂ (FVE)) with tetrafluoroethylene (CF₂ = CF₂ (TFE)) was investigated at various monomer ratios. The copolymerization rate is below the rate of TFE homopolymerization and the copolymerization kinetics depends on the FVE content in the reaction medium. The copolymer composition is very similar if the FVE content in monomer mixture is ≤2.5 mol %. However, the percent amount of FVE in the copolymer, the copolymerization rate, and molecular mass of synthesized copolymers decrease noticeably with increase in the FVE content in the monomer mixture. The constants of copolymerization are r₁= 2.8 (TFE) and r₂ = 0.03 (FVE). The copolymer is a statistical polymer consisting of TFE blocks and individual FVE molecules between the blocks. The average molecular mass of copolymers is significantly less than that of the TFE homopolymer (PTFE) synthesized at the same conditions. The morphologies of PTFE and copolymer powders were investigated by thermomechanical analysis and are not similar. The copolymer has a completely amorphous diblock morphology depending on the FVE content. The introduction of FVE molecules into the copolymer macromolecules is accompanied by reduction of the crystalline portion of copolymer. If the FVE content in copolymer is ≥3.5 mol %, the copolymer macromolecules completely lose the ability to form crystalline portions as a result of their amorphicity. The introduction of up to 2.4 mol % FVE into the copolymer macromolecules yields a highly thermostable and meltable copolymer which can be processed by using the industrial processes used widely for thermoplastics. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Reactivity ratios of free monomers and their charge‐transfer complex in the copolymerization of N‐butyl maleimide and styrene

As for the charge‐transfer complex (CTC) formed by N‐butyl maleimide (NMBI) and styrene in chloroform, the complex formation constant was determined by ¹H‐NMR of Hanna–Ashbaugh. The copolymerization of NBMI (NBMI, M₁) and styrene (St, M₂) in chloroform using AIBN as an initiator was investigated. On the basis of the kinetic model proposed by Shan, the reactivity ratios of free monomers and CTC in the copolymerization were calculated to be r₁₂ = 0.0440, r₂₁ = 0.0349, r_1C = 0.00688, r_2C = 0.00476, and the ratios of rate constants were obtained to be k_1C/k₁₂ = 6.40, k_2C/k₂₁ = 7.33. In addition, the copolymer was characterized by IR, ¹H‐NMR, DSC, and TGA. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3007–3012, 2002; DOI 10.1002/app.2330     

Synthesis,characterization, and thermal properties of alternate copolymers containing N,N′‐bis(diphenylsilyl)tetraphenylcyclodisilazane

Hexamethyldisilazane was used as the starting material to synthesize N,N′‐bis(hydroxydiphenylsilanyl)tetraphenylcyclodisilazane (BHPTPC). By condensation polymerization of BHPTPC with α,ω‐bis(dialkylamino)dimethylsiloxane, a series of alternate copolymers containing N,N′‐bis(diphenylsilyl)tetraphenylcyclodisilazane was synthesized. GPC studies show that the highest molecular weight was obtained at a ratio of 1.005 : 1 (BHPTPC: α,ω‐bis(dimethyl amino)dimethylsiloxane). Data of DSC indicate that the temperature of glass transition (T_g) and temperature of melting point (T_m) decreased with the increasing of dimethylsiloxane segments units. Three stages of degradation were found in the thermogravimetric analysis curves. The activation energy of the copolymer (with m = 2, 3, and 7) was calculated by using Flynn–Wall–Ozawa method. The activation energy of the copolymer with m = 2, 3, and 7 at second stage is 214, 211, and 184 kJ/mol, respectively. Isothermal gravimetric analysis shows that for the same temperature and the same time, the weight loss of the alternate copolymer was greatly less than that of common polydimethylsiloxane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 611–617, 2007     

Effects of 1,2‐butadiene on the anionic copolymerization of styrene and 1,3‐butadiene in the presence of polar additives

1,2‐Butadiene is shown to be a chain terminating/transferring agent in butyllithium‐initiated diene polymerization. The influence of 1,2‐butadiene on the anionic copolymerization of 1,3‐butadiene and styrene is investigated using n‐butyllithium as initiator and tetrahydrofuran or N,N,N′,N′‐tetramethylethylenediamine as polar additive. A decrease of copolymerization rate is observed on the addition of 1,2‐butadiene. On introducing 1,2‐butadiene, the number average molecular weight (M_n ) decreases and the molecular weight distribution broadens. The vinyl content of copolymer increases slightly with an increase of 1,2‐butadiene. During the copolymerization, 1,2‐butadiene in the presence of a high ratio of polar additives to n‐butyllithium greatly decreases the copolymerization rate, resulting in a lower value of M_n and a narrower molecular weight distribution than that found for a low ratio of polar additives to n‐butyllithium. This evolution can be explained by the base‐catalyzed isomerization of 1,2‐butadiene to form 1‐butylene in the presence of polar additives. With an increasing amount of 1,2‐butadiene, the vulcanized rubber exhibits an increased rolling resistance and a reduced wet skid resistance owing to the decrease of coupling efficiency. These results further indicate the activity of alkynyllithium derivatives produced by the reaction of alkyllithium and 1‐butyne is less than that of the alkyllithium. Copyright © 2007 Society of Chemical Industry     

Graft copolymerization of acrylamide onto cellulose in presence of comonomer using ceric ammonium nitrate as initiator

The graft copolymerization of acrylamide (AAm) and ethylmethacrylate (EMA) monomers onto cellulose has been carried out using ceric ammonium nitrate (CAN) as initiator in presence of nitric acid at (25 ± 1)°C and varying feed molarity from 7.5 × 10^?2 mol dm^?3 to 60.0 × 10^?2 mol dm^?3 at fixed feed composition (f_AAm = 0.6). The graft yield (%G_Y) has shown a linear increasing trend upto a feed molarity of 37.5 × 10^?2 mol dm^?3. The composition of grafted copolymer chains was found to be constant (F_AAm = 0.56) during feed molarity variation but shown variations with feed composition (f_AAm) and reaction temperature. The grafting parameters have shown increasing trends up to 7.5 × 10^?3 mol dm^?3 concentration of ceric (IV) ions and decreased on further increasing the concentration of ceric (IV) ions beyond 7.5 × 10^?3 mol dm^?3. The IR and elemental analysis data were used to determine the composition of grafted chains (F_AAm) and reactivity ratio of acrylamide (r₁) and ethylmethacrylate (r₂) comonomers. The reactivity ratio for acrylamide (r₁) and ethylmethacrylate (r₂) has been found to be 0.7 and 1.0 respectively, which suggested for an alternate arrangement of average sequence length of acrylamide (mM?₁) and ethylmethacrylate (mM?₂) in grafted chains. The rate of graft copolymerization of comonomers onto cellulose was found to be proportional to square concentration of comonomers and square root to the concentration of ceric (IV) ions. The energy of activation (ΔEa) of graft copolymerization was found to be 9.57 kJ mol^?1 within the temperature range of 20–50°C. On the basis of experimental findings, suitable reaction steps have been proposed for graft copolymerization of selected comonomers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2546–2558, 2006     

Polymers with pendant isocyanate groups. II. Dual synthesis and properties of poly(acrylonitrile-co-styryl isocyanate)

The copolymer poly(acrylonitrile-co-styryl isocyanate) was prepared directly in bulk by radical initiation either from the monomer pair acrylonitrile–cinnamoyl azide or from the pair acrylonitrile–styryl isocyanate. The copolymerization parameters, calculated by the conventional scheme, are r₁, = 3.5 ± 0.5; r₂ = 0 ± 0.5, for the first pair and r₁ = 9 ± 0.5; r₂ = 0 ± 0.5 for the second pair. The basic physical properties (solubility, intrinsic viscosity, and thermal behavior) of the new copolymer were determined and the chemical reactions of the isocyanate group with alcohol and with dimethylformamide were investigated.