Stability constants of amidoximated chitosan‐g‐poly(acrylonitrile) copolymer for heavy metal ions

Amidoximated chitosan‐g‐poly(acrylonitrile) (PAN) copolymer was prepared by a reaction between hydroxylamine and cyano group in chitosan‐g‐PAN copolymer prepared by grafting PAN onto crosslinked chitosan with epychlorohydrine. The adsorption and desorption capacities for heavy metal ions were measured under various conditions. The adsorption capacity of amidoximated chitosan‐g‐PAN copolymer increased with increasing pH values, and was increased for Cu²⁺ and Pb²⁺ but a little decreased for Zn²⁺ and Cd²⁺ with increasing PAN grafting percentage in amidoximated chitosan‐g‐PAN copolymer. In addition, desorption capacity for all metal ions was increased with increasing pH values in contrast to the adsorption results. Stability constants of amidoximated chitosan‐g‐PAN copolymer were higher for Cu²⁺ and Pb²⁺ but lower for Zn²⁺ and Cd²⁺ than those of crosslinked chitosan. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 469–476, 1999     

Preparation and characterization of dual responsive sodium alginate‐g‐poly(vinyl alcohol) hydrogel

Poly(vinyl alcohol) (PVA) was chosen as a controllable gelator to prepare sodium alginate (SA)‐based physically cross‐linked dual‐responsive hydrogel by three steps. First, polyvinyl acetate (PVAc) was grafted onto SA via radical copolymerization. Then, the copolymer was subsequently converted into SA‐g‐poly(vinyl alcohol) (SAPVA) by alcoholysis reaction. PVA content of SAPVA was tailored by controlling the graft percentage of PVAc, i.e. through varying the amount of vinyl acetate during copolymerization. Finally, SAPVA hydrogels were formed by freezing‐thawing cycles. The structure of the graft copolymers was verified with FTIR spectroscopy. X‐ray diffraction analysis results revealed that the crystallinity of SAPVA hydrogels depended on the PVA content of SAPVA. The swelling test showed that SAPVA hydrogels were pH‐responsive, and the swelling was reversible. SAPVA hydrogels also behaved electric‐responsive. In addition, the pH‐sensitivity of SAPVA hydrogels was able to be controlled with the composition of the hydrogels. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Swelling of pH‐sensitive chitosan–poly(vinyl alcohol) hydrogels

The swelling properties of different chitosan–poly(vinyl alcohol) (PVA) hydrogels were investigated as functions of the medium pH and salt concentration. The maximum swelling ability of the hydrogels was at a buffer pH of approximately 3, regardless of the PVA content in the hydrogels. The maximum mass of the swollen hydrogels was about 13 times that of their contracted counterparts. The cyclical swelling and contraction between pH 3 and pH 7 buffers and pH 3 and pH 3 buffers with salt confirmed the Donnan swelling mechanism of these hydrogels. The swelling mechanism was considered the transfer of water molecules driven by a concentration gradient. This was represented by a simplified mass‐balance model, which neglected the effect of the ionization reaction, for the initial swelling period. The effective mass‐transfer coefficient of water molecules during swelling, estimated with this model, gradually decreased with increasing PVA content in the hydrogels. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4665–4671, 2006     

Preparation and swelling properties of semi‐IPN hydrogels based on chitosan‐g‐poly(acrylic acid) and phosphorylated polyvinyl alcohol

The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g^?1 in distilled water and 55 g·g^?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g^?1 in distilled water and 47 g·g^?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polyacrylonitrile‐g‐poly(vinyl alcohol) membranes for the pervaporation separation of dimethyl formamide and water mixtures

Poly(vinyl alcohol) as well as its grafted copolymer membranes with polyacrylonitrile (PAN‐g‐PVA) were prepared and used to separate water and dimethyl formamide mixtures by the pervaporation technique. The three following membranes were prepared: (1) pure PVA; (2) 46% grafted PAN‐g‐PVA; and (3) 93% grafted PAN‐g‐PVA. Pervaporation separation experiments were carried out at 25°C for the feed mixture containing 10 to 90% water. By use of the transport data, permeation flux, separation selectivity, swelling index, and diffusion coefficients have been calculated. By increasing the grafting of the membrane, flux decreased, whereas separation selectivity increased slightly over that of pure PVA membrane. Arrhenius activation parameters for transport processes were calculated for 10 mass % water containing feed mixture by using flux and diffusion data obtained at 25, 35, and 45°C. Transport parameters were discussed in terms of sorption‐diffusion principles. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4091–4097, 2004     

Selected properties of pH‐sensitive,biodegradable chitosan–poly(vinyl alcohol) hydrogel

Chitosan and poly(vinyl alcohol) (PVA) were used to form a semi‐interpenetrating polymeric network with glutaraldehyde as the cross‐linker. The molecular weight and degree of deacetylation of the chitosan were 612 kDa and 72 %, respectively. The chemical bonds formed by the cross‐linking reaction and transition of these bonds in different pH media were investigated. The gelation property of the chitosan–PVA pregel solution and mechanical properties of the hydrogel were studied. The FTIR spectra of the hydrogel before and after swelling at pH 3 and pH 7 indicated formation of Schiff's base (C?N) and ? NH₃⁺. They also showed pH‐induced transition of C?N to C? N, and ? NH₃⁺ to ? NH₂, as well as the instability of the Schiff's base. The chitosan is essential for hydrogel formation through Schiff's base reaction between the amino groups of the chitosan and the aldehyde groups of the glutaraldehyde. The addition of PVA improved the mechanical properties of the hydrogel. However, PVA tends to leach out at longer swelling times in the acidic medium due to hydrolysis of the gel networks, Schiff's base. Copyright © 2004 Society of Chemical Industry     

Alginic acid‐g‐poly(N‐vinylformamide) graft copolymer: Synthesis,characerization, swelling,and flocculation property

The graft copolymer of N‐vinylformamide with alginic acid was synthesized by free radical polymerization using potassium peroxymonosulphate and thiourea as redox pair in inert atmosphere. The optimum conditions for maximum grafting have been determined by varying the concentrations of N‐vinylformamide, potassium peroxymonosulphate, thiourea, sulfuric acid, alginic acid as well as time duration and temperature. The grafting parameters increase up to the certain concentrations of N‐vinylformamide, potassium peroxymonosulhate, thiourea, and hydrogen ion while thereafter grafting parameters decrease. The effect of alginic acid concentration on grafting parameters has been observed to decrease continuously. It has also been found that grafting parameters increase up to certain time and temperature, respectively, and thereafter decrease. The swelling properties of graft copolymer in terms of swelling ratio and percent swelling are investigated. Flocculation property of pure and grafted sample for both coking and noncoking coals is also investigated for the treatment of coal mine waste water. The graft copolymer has been characterized by Fourier transform infrared spectroscopy as well as thermogravimetic analysis. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Melting behavior and surface morphology of poly(vinyl acetate‐co‐vinyl alcohol) copolymer

In a study of the surface morphology of commercial poly(vinyl acetate‐co‐vinyl alcohol) (ACA copolymer) with different percents of hydrolysis, different structures like fibrils, spherulites, micelles, vesicles, and spheroids were seen. The copolymer was crystallized by annealing at two different temperatures. The morphology of the polymer after crystallization and also without crystallization was studied. A decrease in the melting temperature just by heating to the melting temperature was observed, and for a detailed study, repetitive heating of the copolymer was carried out and changes in the mass and heat of fusion after every heating was recorded. The morphology of the copolymer after repetitive heating was studied. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1211–1218, 2002     

The flocculating properties of chitosan‐graft‐polyacrylamide flocculants (I)—effect of the grafting ratio

A series of chitosan‐graft‐polyacrylamide copolymers have been prepared as flocculants for waste water treatment. The results indicated that the grafting ratio was one of the key factors for the flocculating effects. The copolymers with various grafting ratios showed different flocculating properties. To observe every detail of this effect, the specific refractive index increment measurement (SRIIM) method was used to determine the grafting ratio at the beginning of this study. Interestingly, it was found that as the grafting ratio increased, the flocculating effect increased until it reached its maximum point. At that point, it decreased. This result was discussed in terms of the cooperative effects of the charge neutralization and bridging flocculating mechanisms. A structure model of chitosan‐g‐polyacrylamide copolymer flocculants has been proposed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Co‐poly(vinyl chloride‐vinyl acetate‐vinyl alcohol)‐silica nanocomposites from sol–gel process: Morphological,mechanical, and thermal investigations

Organic–inorganic nanocomposites consisting of co‐poly(vinyl chloride‐vinyl acetate‐vinyl alcohol) and silica were prepared via sol–gel process. Two types of hybrids were prepared, one in which interactions between hydroxyl group present in the copolymer chain and silanol groups of silica network were developed. In the second set, extensive chemical bonding between the phases was achieved through the reaction of hydroxyl groups on the copolymer chains with 3‐isocyanatopropyltriethoxysilane (ICTS). Hydrolysis and condensation of tetraethoxysilane and pendant ethoxy groups on the chain yielded inorganic network structure. Mechanical and thermal behaviors of the hybrid films were studied. Increase in Young's modulus, tensile strength, and toughness was observed up to 2.5 wt % silica content relative to the neat copolymer. The system in which ICTS was employed as binding agent, the tensile strength and toughness of hybrid films increased significantly as compared to the pure copolymer. Thermogravimetric analysis showed that these nanocomposite materials were stable up to 250°C. The glass transition temperature increases up to 2.5 wt % addition of silica in both the systems. Field emission scanning electron microscope results revealed uniform distribution of silica in the copolymer matrix. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,characterization, and properties of poly(vinyl acetate)‐ and poly(vinyl alcohol)‐grafted chitosan

Graft copolymers of chitosan and vinyl acetate were synthesized by free radical technique using cerium (IV) as the initiator. Under controlled conditions, as much as 92% grafting with a grafting yield of 30–40% could be achieved. Chitosan‐g‐poly(vinyl alcohol) copolymers were derived by the alkaline hydrolysis of the chitosan‐g‐poly(vinyl acetate) precursor. Thermogravimetric, FTIR, and X‐ray diffraction analyses of chitosan and the copolymers confirmed the grafting reaction between chitosan and vinyl acetate and also the subsequent hydrolysis. Both the copolymers possessed very good film‐forming properties. Grafting resulted in a significant increase in mechanical strength of both the copolymers in the dry condition. Chitosan‐g‐poly(vinyl acetate) (CH‐PVAc) proved more hydrophobic than did pure chitosan, whereas chitosan‐g‐poly(vinyl alcohol) (CH‐PVOH) exhibited enhanced hydrophilicity as evident from their swelling characteristics and contact angle measurements. The enhanced swelling of CH‐PVOH was ascribed to the presence of the pendant poly(vinyl alcohol) group. At pH 1.98, the CH‐PVAc copolymer films showed greater stability than do pure chitosan films, which is highly beneficial for specific biomedical applications. Both the copolymers showed lower glass transition temperature than do pure chitosan. Grafting did not affect the overall thermal stability, and the differential thermogram substantiated the grafting. The investigations indicate that the synthetic–natural hybrid copolymers having desirable mechanical properties and tailored hydrophilic/hydrophobic characteristics are realizable. These polymers could be exploited for varied biomedical applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1852–1859, 2007     

Water stability of high‐molecular‐weight (HMW) syndiotacticity‐rich poly(vinyl alcohol) (PVA)/HMW atactic PVA/iodine complex blend films

To precisely identify the effect of blend ratios of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA)/atactic PVA (a‐PVA) on the water stability of s‐PVA/a‐PVA/iodine complex blend films, we prepared two PVAs with similar number‐averaged degrees of polymerization of 4000 and degrees of saponification of 99.9% and with different syndiotactic diad contents of 58.5 and 53.5%, respectively. The desorption behavior of iodine in s‐PVA/a‐PVA/iodine complex films in water was investigated in terms of the solubility of s‐PVA/a‐PVA blend films in water. The degree of solubility of s‐PVA/a‐PVA blend films with s‐PVA content over 50% in water at 70°C was limited to about 10–20%, whereas that of s‐PVA/a‐PVA blend films with s‐PVA content of 10% was 85% under the same conditions. The degree of iodine desorption of complex blend films decreased with increasing s‐PVA content. The degree of iodine desorption of s‐PVA/a‐PVA drawn film with s‐PVA content of 90% was limited to 7%, regardless of the soaking temperature from 30 to 70°C. The desorption of iodine in water was strongly affected by the dissolution of blends. Moreover, the stability of iodine in the drawn s‐PVA/a‐PVA/iodine blend films in hot water was far superior to that of the undrawn film. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1435–1439, 2004     

Hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐sodium acrylate) superabsorbent polymers

A novel hydroxyethyl chitosan‐g‐poly(acrylic acid‐co‐Sodium Acrylate) (HECTS‐g‐(PAA‐co‐PSA)) superabsorbent polymer was prepared through graft copolymerization of acrylic acid and sodium acrylate onto the chain of hydroxyethyl chitosan. The structure of the polymer was characterized by FTIR. By studying the water absorption of the polymer synthesized under different conditions, the optimal conditions for synthesizing the polymer with the highest swelling ratio was defined. This superabsorbent polymer was further treated by the solvent precipitation method and by the freeze‐drying method. We found that the water absorption rate of the treated polymer was greatly increased and the microstructure of the treated polymer was changed from small pores to loose macro pores. The swelling processes of the polymers before and after modification fit first‐order dynamic processes. The amount of the residual acrylic acid was greatly decreased after treatments. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and properties of chitosan‐modified poly(vinyl acetate)

A redox initiator, cerium ammonium nitrate, was used to initiate the graft copolymerization of vinyl acetate (VAc) onto the chitosan chain in a dispersion polymerization at 60°C. With an addition of 0.5–7.5 g of chitosan based on 50 g of VAc, the monomer conversion was found to be between 70 and 80% after 2 h of reaction. The grafting efficiency increased with the amount of chitosan added; yet, the grafting ratio increased slightly and then decreased. After the reaction, a stable dispersion system was observed and the surface of the latex particles was found to be rich in chitosan. All the experimental results indicated that the chitosan molecules not only took part in the graft copolymerization, but also served as a surfactant, providing the stability of the dispersion particles. If the dispersion aqueous solution was oven‐dried, a particulate membrane was formed. The experimental results indicated that the incorporation of poly(vinyl acetate) to the chitosan chains increased the toughness and decreased the water absorption of the chitosan material. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3057–3063, 2002     

In vitro release of salicylic acid through poly(vinyl alcohol‐g‐itaconic acid) membranes

In this study, itaconic acid (IA) was grafted on poly(vinyl alcohol) (PVA) at two different grafting percentages, 7.0% (w/w) and 14.0% (w/w), and membranes were prepared from the grafted copolymer (PVA‐g‐IA). Performances of PVA and PVA‐g‐IA membranes for the transdermal release of salicylic acid (SA) at in vitro conditions were investigated by using 2.0 mg/mL SA solutions. Effect of the pH on the release of SA was studied by keeping pH of donor and acceptor solutions in a range of (2.1–7.4). Permeation studies were also carried on at different SA concentrations. Effect of temperature on the release of SA was investigated in the temperature range of (32–39) (±1)°C. Results showed that presence of IA decreased the release of SA from the PVA membranes and 73% SA was released at the end of 48 h at (32 ± 1)°C from the IA‐1 membranes. pH affected the release of SA through the grafted membranes and studies showed that release of SA was high with donor solution pH of 2.1. When the pH of donor and receiver solutions were kept at the same pH value, the overall SA% in permeate increased. Increase in concentration of SA decreased the release of SA for the studied membranes. Release of SA from PVA‐g‐IA membranes was temperature sensitive and increase in temperature from (32 ± 1)°C to (39 ± 1)°C increased the release percentage of SA by 24% (w/w). The overall activation energy for the permeation of SA through IA‐1 membrane was found to be 22.97 kJ/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

On physical and antibacterial properties and drug release behavior of poly(vinyl alcohol) hydrogels: effect of drug loaded chitosan nanoparticles

This paper deals with influence of chitosan nanoparticles (CNPs) loaded by tetracycline, as a drug, on the physico-mechanical and antibacterial properties as well as drug release behavior of poly(vinyl alcohol), PVA, hydrogels prepared by electron beam irradiation. The formation of spherical chitosan particles in nanoscale size prepared by an ionic gelation method was confirmed by FTIR and UV spectroscopy, and scanning electron microscopy analyses. The drug release kinetic studies from drug loaded chitosan nanoparticles (DLCNPs) at pH = 7.4 revealed a linear and steady release behavior over long period of time. The theoretical analysis of the swelling kinetic data, using Peppas’s model showed that the swelling kinetic is governed by Fickian diffusion for all the prepared hydrogels, however, the water diffusion coefficient, and therefore, the swelling content were lower for the hydrogels loaded with DLCNPs as compared to the ones with the neat drug. In agreement with these results, the hydrogels containing DLCNPs exhibited a more controlled drug release behavior with significantly stronger antibacterial activity. The tensile mechanical properties of the hydrogels not affected by the DLCNPs were found to be suitable for wound dressing applications.     

Swelling kinetics of modified poly(vinyl alcohol) hydrogels

Interpenetrating polymer network (IPN) hydrogels composed of poly(vinyl alcohol) (PVA) and monomer, N‐isopropylacrylamide (NIPAAm), diallyldimethylammonium chloride (DADMAC), or methacrylic acid (MAA) were prepared by using the sequential‐IPN method. The equilibrium swelling ratios of PVA/NIPAAm (VANP), PVA/DADMAC (VADC), and PVA/MAA (VAMA) are 412, 370, and 297 at 25°C, respectively. VANP had the highest swelling ratio in time‐dependent swelling behavior, whereas the swelling ratio of VAMA had the lowest. The n values of VANP, VADC, and VAMA are 0.72, 0.81, and 0.96, respectively. Transport of all IPN hydrogels is anomalous and their transport mechanisms are dominated by a combination of diffusion‐controlled and relaxation‐controlled systems. VAMA has the highest activation energy and VANP has the lowest activation energy. The values of all IPN hydrogels are from 4.66 to 16.49 kJ/mol, which proves that all IPN hydrogels are hydrophilic. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3310–3313, 2003     

Swelling behavior of gelatin‐g‐poly(butyl acrylate) copolymers

Gelatin‐g‐poly (butyl acrylate) copolymers were prepared with gelatin and butyl acrylate. The effects of various reaction parameters, including the concentration of the monomer, the concentration of the initiator, the concentration of gelatin, the reaction time, and the temperature, on the swelling behavior were studied systematically. In addition, the effect of the intercalation of graft copolymers with montmorillonite on the swelling behavior was investigated. The results indicated that the graft copolymerization and intercalation with montmorillonite could greatly reduce the swelling degree of gelatin. The swelling process of the copolymers followed second‐order kinetics identical to those of the original gelatin. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1033–1037, 2005     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005