Mechanism of degradation of poly(p‐phenylene benzobisoxazole) under hydrolytic conditions

Poly(p‐phenylene benzobisoxazole) (PBO) fiber has received great interest because of its excellent mechanical properties and good thermal stability. The objective of this study was to expose degradation mechanism of PBO under neutral and acidic conditions by molecular mass and Fourier transform infrared (FTIR) spectroscopy. Results were not consistent with the classic degradation mechanism, which indicates that degradation should occur through the ring opening and chain scission of the benzoxazole ring. The FTIR absorption spectra of PBO suggested that the o‐hydroxy amide linkage (the open ring structure) was present in the PBO molecule chain to some extent because of the incomplete polymerization. Further investigation showed that hydrolysis might occur in the open ring section during hydrolytic degradation. Based on the experimental data, a new degradation mechanism was proposed. It suggests that, in the early and middle stages, hydrolysis occurred primarily in the o‐hydroxy amide linkage of the open ring. The concentration of the o‐hydroxy amide structure determined the speed of degradation of PBO. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

In vitro degradation of dry‐jet‐wet spun poly(lactic acid) monofilament and knitted scaffold

In vitro degradation behavior of dry‐jet‐wet spun poly(lactic acid) (PLA) monofilament and knitted scaffold were studied at three different pH i.e., at 4.6, 7.4, and 8.0 at 37°C for 20 weeks. Characterization of PLA by intrinsic viscosity, thermal properties, and scanning electron microscopy (SEM) was carried out. It is observed that the pH of the medium has significant role on degradation behavior of PLA. The degradation at pH 4.6 is observed to be maximum, which is confirmed by the drop of 52% in intrinsic viscosity. The degradation process has effect on the hydrophobicity of the PLA. The decrease in contact angle from 73° to 48° indicates that the PLA surface tends to become more hydrophilic as the degradation proceeds. The SEM analysis showed that with the degradation, surface deterioration takes place. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2006–2012, 2007     

Retardation effect of nanohydroxyapatite on the hydrolytic degradation of poly (lactic acid)

Poly (lactic acid) (PLA) and PLA/nanohydroxyapatite (nHA) composites, containing 2 wt% and 5 wt% of nHA were subjected to in vitro hydrolytic degradation tests in saline phosphate solution at different temperatures (37°C, 48°C, 60°C, and 72°C) to accelerate degradation. Samples were characterized by water uptake, weight loss tests, size exclusion chromatography (SEC), differential scanning calorimetry (DSC), and visual analyses. Arrhenius equation was used to describe the behavior of weight loss as a function of time. The PLA activation energy of weight loss showed to be lower than that of the PLA/nHA composites, indicating that the incorporation of nHA retarded the hydrolytic degradation. The rate and percentage of weight loss increased with increasing temperature. All samples presented a decrease in T_g and an increase in degree of crystallinity as a function of time. Incorporation of nHA retarded this behavior that showed to be more expressive in PLA containing 5 wt% nHA.     

Properties and morphology of poly(L‐lactide). III. Effects of initial crystallinity on long‐term in vitro hydrolysis of high molecular weight poly(L‐lactide) film in phosphate‐buffered solution

The effects of crystallinity (x_c) on the hydrolysis of high molecular weight poly(L ‐lactide) (PLLA) films in a phosphate‐buffered solution at 37°C was investigated by gel permeation chromatography, tensile testing, differential scanning calorimetry, scanning electron microscopy, and polarizing optical microscopy. The change in molecular weight distribution and surface morphology of the PLLA films after hydrolysis revealed that the hydrolysis of PLLA film in a phosphate‐buffered solution proceeded homogeneously along the film cross section, mainly via the bulk‐erosion mechanism. The induction period until the start of the decrease in mass remaining and the tensile strength became longer with a decrease in the initial x_c of the PLLA films. The rate of molecular weight reduction was higher as the initial x_c of the PLLA films increased when hydrolysis was carried out up to 24 months. Melting and glass transition temperatures of the PLLA films increased in the first 12 months of hydrolysis, while they decreased in another 24 months, irrespective of the initial x_c. The x_c value of the PLLA films increased monotonously by hydrolysis. The lamella disorientation in PLLA spherulites after hydrolysis implied that the hydrolysis of PLLA chains occurred predominantly in the amorphous region between the crystalline regions in the spherulites. The area of a specific molecular weight in GPC spectra at 36 months increased with increase in the initial x_c of the PLLA film, suggesting that the specific peak should be due to the component of one fold in the crystalline region. The reason for enhanced hydrolysis of PLLA films having higher initial crystallinities was discussed in terms of tie chains and terminal groups of PLLA. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1452–1464, 2000     

Biodegradable poly(L‐lactic acid)/TiO2 nanocomposites: Thermal properties and degradation

Poly(L ‐lactic acid)‐titanium dioxide nanocomposites (with various loadings of TiO₂: 0.5, 1, 2, 5, and 10 wt %) were produced by solution casting method. The influence of TiO₂ on thermal properties and crystallinity of PLA was investigated by DSC and FTIR spectroscopy. The TiO₂ nano filler has no significant influence on the characteristic temperatures (T_g, T_c, and T_m), but has high impact on the crystallinity of these systems. The degree of crystallinity X_c significantly increases for PLA nanocomposites loaded with up to 5 wt % of TiO₂, while for 10 wt % load of TiO₂ it drops below X_c of the pure resin. The degradation of the prepared composites was evaluated hydrolytically in 1N NaOH, enzymatically in α‐amylase solutions, and under UV irradiation. The catalytic effect of TiO₂ nano particles on the degradation processes under UV light exposure (λ = 365 nm) and hydrolytic degradation was confirmed with the increase of the filler content. The opposite effect was identified in enzymatic degradation experiments. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Characterization of the mechanical properties,crystallization, and enzymatic degradation behavior of poly(butylene succinate‐co‐ethyleneoxide‐co‐DL‐lactide) copolyesters

A series of aliphatic biodegradable poly (butylene succinate‐co‐ethyleneoxide‐co‐DL ‐lactide) copolyesters were synthesized by the polycondensation in the presence of dimethyl succinate, 1,4‐butanediol, poly(ethylene glycol), and DL ‐oligo(lactic acid) (OLA). The composition, as well as the sequential structure of the copolyesters, was carefully investigated by ¹H‐NMR. The crystallization behaviors, crystal structure, and spherulite morphology of the copolyesters were analyzed by differential scanning calorimetry, wide angle X‐ray diffraction, and polarizing optical microscopy, respectively. The results indicate that the sequence length of butylene succinate (BS) decreased as the OLA feed molar ratio increasing. The crystallization behavior of the copolyesters was influenced by the composition and sequence length of BS, which further tuned the mechanical properties of the copolyesters. The copolyesters formed the crystal structures and spherulites similar to those of PBS. The incorporation of more content of ethylene oxide (EO) units into the copolyesters led to the enhanced hydrophilicity. The more content of lactide units in the copolyesters facilitated the degradation in the presence of enzymes. The morphology of the copolyester films after degradation was also studied by the scanning electron microscopy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Enhanced hydrolytic stability of poly(p‐dioxanone) with polycarbodiimide

The effect of polycarbodiimide (PCD) on hydrolytic stability of poly(p‐dioxanone) (PPDO) was investigated by hydrolytic degradation of PPDO and PPDO added with PCD (PPDOCD) in phosphate buffer solution (pH = 7.4) at 37°C. The variation of weight, water absorption, pH, molecular weight, tensile properties, surface morphologies, and thermal properties with degradation time were evaluated. After 11 weeks, the weight loss and water absorption of PPDO was 24 and 30%, respectively, but the corresponding values were only 3 and 5% for PPDOCD5, where 5 represents the weight percentage of PCD added; the molecular weight of PPDO decreased much faster than that of PPDOCD. The pH of the solution was monitored for 15 weeks and a final pH value of the solution involving PPDOCD5 was 6.81 whereas that of PPDO solution was 3.77, indicating that more acid fragments from PPDO samples migrate into the buffer solution. Surface morphological changes showed a better physical integrity for PPDOCD samples and they also kept their mechanical properties for a longer time than PPDO samples. These results revealed that PCD can retard the hydrolysis degradation of PPDO and enhance its hydrolytic stability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermally induced crystallization and enzymatic degradation studies of poly (L‐lactic acid) films

Poly(L ‐lactic acid) (PLLA) films with different crystallinities were prepared by solvent casting and subsequently annealed at various temperatures (T_a) (80–110°C). The effects of crystallinity on enzymatic degradation of PLLA films were examined in the presence of proteinase K at 37°C by means of weight loss, DSC, FTIR spectroscopy, and optical microscopy. DSC and the absorbance ratio of 921 and 956 cm^?1 (A₉₂₁/A₉₅₆) were used to evaluate crystallinity changes during thermally induced crystallization and enzymatic hydrolysis. The highest percentage of weight loss was observed for the film with the lowest initial crystallinity and the lowest percentage of weight loss was observed for the film with highest crystallinity. FTIR investigation of degraded films showed a band at 922 cm^?1 and no band at 908 cm^?1 suggested that all degraded samples form α crystals. The rate of degradation was found to depend on the initial crystallinity of PLLA film and shown that enzymatic degradation kinetics followed first‐order kinetics for a given enzyme concentration. DSC crystallinity and IR absorbance ratio, A₉₂₁/A₉₅₆ ratio, showed no significant changes with degradation time for annealed PLLA films whereas as‐cast PLLA film showed an increase in crystallinity with degradation; this revealed that degradation takes place predominantly in the free amorphous region of annealed PLLA films without changing long range and short range order © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Crystalline oligomeric stereocomplex as an intermediate compound in racemic poly(DL-lactic acid) degradation

Hydrolytic degradation of intrinsically amorphous poly(DL -lactic acid) was re-examined in pH 7.4 isoosmolar phosphate buffer at 37°C. Size-exclusion chromatogarphy, X-ray scattering and differential scanning calorimetry were used to monitor molecular weight and morphology changes up to the ultimate degradation stage. It was found that heterogeneous degradation of poly(DL -lactic acid) yielded a crystalline residual material of low molecular weight. Comparison with a stereocomplex made of equimolar poly(L -lactic acid) and poly(D -lactic acid) showed that the poly(DL -lactic acid) degradation residue was actually an oligomeric stereocomplex. The formation of stereoregular oligomeric enantiomers agreed well with the predominantly isotactic structure of poly(DL -lactic acid) obtained by ring-opening polymerization of DL -lactide and argued in favour of the stereodependence of main chain ester bond cleavage.     

Multiblock copolymers based on segments of poly (D,L‐lactic‐glycolic acid) and poly(ethylene glycol) or poly(ϵ‐caprolactone): A comparison of their thermal properties and degradation behavior

A comparison of the thermal properties of two classes of poly(D,L ‐lactic‐glycolic acid) multiblock copolymers is reported. In particular, the results of differential scanning calorimetry, and thermogravimetric analysis of copolymers containing poly(ethylene glycol) (PEG) or diol‐terminated poly(ϵ‐caprolactone) (PCDT) segments are described. The influence of the chemical structure and the length of PEG and PCDT on thermal stability, degree of crystallinity and glass transition temperature (T_g ) is discussed. Finally, an evaluation of the hydrolytic behavior in conditions mimicking the physiological environment is reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1721–1728, 2000     

Relationship between the crystallization behavior of poly(ethylene glycol) and stereocomplex crystallization of poly(L‐lactic acid)/poly(D‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a good biomedical polymer material with wide applications. The addition of poly(ethylene glycol) (PEG) as a plasticizer and the formation of stereocomplex crystals (SCs) have been proved to be effective methods for improving the crystallization of PLLA, which will promote its heat resistance. In this work, the crystallization behavior of PEG and PLLA/poly(d ‐lactic acid) (PDLA) in PLLA/PDLA/PEG and PEG‐b‐PLLA/PEG‐b‐PDLA blends has been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. Both SCs and homocrystals (HCs) were observed in blends with asymmetric mass ratio of PLLA/PDLA, while exclusively SCs were observed in blends with approximately equal mass ratio of PLLA/PDLA. The crystallization of PEG was only observed for the symmetric blends of PLLA_39k/PDLA_35k/PEG_2k, PLLA_39k/PDLA_35k/PEG_5k, PLLA_69k/PDLA_96k/PEG_5k and PEG‐b‐PLLA_31k/PEG‐b‐PDLA_27k, where the mass ratio of PLLA/PDLA was approximately 1/1. The results demonstrated that the formation of exclusively SCs would facilitate the crystallization of PEG, while the existence of both HCs and SCs could restrict the crystallization of PEG. The crystallization of PEG is related to the crystallinity of PLLA and PDLA, which will be promoted by the formation of SCs. © 2017 Society of Chemical Industry     

连续挤出发泡聚乳酸泡孔结构的影响因素

介绍了采用超临界CO2作为发泡剂,连续挤出聚乳酸泡沫塑料的方法。在不同的实验条件下,对聚乳酸进行挤出发泡,得到聚乳酸发泡样品。通过对样品的ESM照片的分析研究,得出了不同的发泡条件对挤出聚乳酸泡沫泡孔结构的影响。结果表明螺杆转速的增加使得泡孔数量增加,泡孔形态更加规整均匀。模头温度影响了泡孔形态,较高的温度会使得样品的泡孔形态受到不利的影响。水分的存在不利于聚乳酸发泡成为均匀发泡倍率高的泡沫制品。成核剂促进异相成核,使发泡样品的泡孔结构更加均匀,大大提高了聚乳酸泡沫塑料的泡孔密度。     

Telechelic poly(L‐lactic acid) for dilactide production and prepolymer applications

The suitability of different types of telechelic poly(lactic acid) (PLA) copolymers for dilactide production and prepolymer products was evaluated. L ‐lactic acid (L ‐LA) was copolymerized with 1,4‐butanediol, pentaerythritol, adipic acid, or 1,2,3,4‐butanetetracarboxylic acid (1,2,3,4‐BTCA). The influence of branching, the choice of catalyst, and the type of terminal groups on the properties and the thermal stability of the end product was determined. Carboxyl‐termination of PLA was shown to lead to higher molar masses than hydroxyl‐termination. The observed differences in the molar masses were explained by the lower thermal stability of the hydroxyl‐terminated PLA, as evidenced by the faster depolymerization rate of the hydroxyl‐terminated polymers and their higher tendency to undergo racemization. Sn(Oct)₂ was found to be a more effective copolymerization catalyst than Fe(OAc)₂ in terms of the final molar masses obtained. It was additionally found that the amount of chains not attached to the comonomers decreased toward longer polymerization times and was typically higher for the hydroxyl‐terminated copolymers. The results suggest that predominant carboxyl‐termination would increase the thermal stability of PLA polymers, whereas hydroxyl‐termination could be utilized to increase the production speed and efficiency of dilactide. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of segment structures on the hydrolytic degradation behaviors of totally degradable poly(L-lactic acid)-based copolymers

A series of high-molecular-weight terpolymers named PTG-b-LG and PT-b-LG were synthesized based on the macroinitiators of PTG copolymers and PTMC, respectively. In vitro degradation of PTG-b-LG and PT-b-LG was carried out by immersing into PBS, in comparison with that of PLLA. Mass loss, water uptake, GPC, DSC, WAXD, and ¹H NMR were examined for the degradation study. It was found that PTG-b-LG degraded faster than PT-b-LG and PLLA due to the Di-random block structure, which had lower regularity of chain and lower crystallinity. The compositional changes appeared to be more complex, but the molar mass decreased owing to chain fragmentation caused by hydrolysis. Moreover, morphological changes were also observed during the degradation in all situations with the crystallization of by-products and a preferential degradation of amorphous domains. Specifically, PTG-b-LG presented an adjustable degradation rate and may be used for the fabrication of totally biodegradation stents in the future. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47887.     

In vitro degradation and release profiles of poly‐DL‐lactide‐poly(ethylene glycol) microspheres with entrapped proteins

Poly‐DL ‐lactide (PLA) and poly‐DL ‐lactide‐poly(ethylene glycol) (PELA) were produced by bulk ring‐opening polymerization using stannous chloride as initiator. PLA, PELA microspheres, and PELA microspheres containing the outer membrane protein (OMP) of Leptospira interrogans with the size of 1.5–2 μm were prepared by a solvent evaporation process. In vitro degradation and release tests of PLA, PELA, and OMP‐loaded PELA microspheres were performed in pH 7.4 buffer solution at 37°C. Quantitatively, the degree of degradation was monitored by detecting the molecular weight reduction, by evaluating the mass loss and the apparent degradation rate constant, and by determining the intrinsic viscosity and poly(ethylene glycol) content of retrieved polymer, while the release profile was assessed by measuring the amount of protein presented in the release medium at various intervals. Qualitatively, the morphological changes of microspheres were observed with scanning electron micrography. The observed relative rates of mass loss versus molecular weight reduction are consistent with a bulk erosion process rather than surface erosion for PELA microspheres. The introduction of hydrophilic poly(ethylene glycol) domains in copolymer PELA and the presence of OMP within microspheres show critical influences on the degradation profile. The OMP‐loaded PELA microspheres present triphasic release profile and a close correlation is observed between the polymer degradation and the OMP release profiles. It is suggested that the polymer degradation rate, protein diffusion coefficient, and the water‐swollen structure of microspheres matrix commonly contribute to the OMP release from PELA microspheres. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 140–148, 2000     

Hydrolytic and thermal degradation of polyethylene glycol compatibilized poly(lactic acid)-nanocrystalline cellulose bionanocomposites

This study investigates the effect of nanocrystalline cellulose (NCC) and polyethylene glycol (PEG) on the hydrolytic degradation behavior of poly(lactic acid) (PLA) bio-nanocomposites compared with that of neat PLA, under specific environmental condition, namely at 37°C in a pH 7.4 phosphate buffer medium for a time period up to 60 days. The water absorption, mass loss, molecular weight, and the morphologies of nanocomposites before and after degradation were explored. Thermogravimetric analysis (TGA) was used to study the thermal decomposition of the PLA/NCC/PEG nanocomposites before and after degradation. The results showed that the presence of hydrophilic NCC and PEG significantly accelerated the hydrolytic degradation of PLA, which was related to the rapid dissolution of PEG causing easy access of water molecules to the composites and initiating fast hydrolytic chain scission of PLA. The thermal degradation temperatures of the nanocomposites slightly decreased due to the poor thermal stability of NCC in comparison with that of the neat PLA. After degradation, the thermal stability of the separated PLA from nanocomposites significantly decreased because the molecular decreased during the hydrolytic process. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46933.     

Heterogeneous hydrolytic degradation of poly(lactic‐co‐glycolic acid) microspheres: Mathematical modeling

A new mathematical model for the prediction of the heterogeneous hydrolytic degradation of poly(D,L‐lactide‐co‐glycolide) (PLGA)‐based microspheres was developed. The model takes into account the autocatalytic effect of carboxylic groups and polymer composition on the degradation rate. It is based on mass balances for the different species, considering the kinetic and mass transport phenomena involved. The model estimates the evolution of average molecular weight, mass loss, and morphological change of the particles during degradation, and it was validated with novel experimental data. Theoretical predictions are in agreement with the hydrolysis data of PLGA microspheres (error values less than 5%). The model is able to predict the effect of particle size and molecular weight on the degradation of PLGA‐based microspheres and estimates the morphological changes of the particles due to the autocatalytic effect. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45464.     

Stereocomplexation of solvent‐cast poly(lactic acid) by addition of non‐solvents

Equimolar blends of poly(L ‐lactic acid) (PLLA) and poly(D ‐lactic acid) (PDLA) were obtained by solution casting from chloroform/methanol mixed solvents and analyzed using wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and polarizing optical microscopy. Chloroform and methanol are a solvent and non‐solvent, respectively, for poly(lactic acid). The WAXD and DSC results showed that stereocomplex crystallization between PLLA and PDLA occurred in addition to homo‐crystallization. On adding methanol to the casting solution, the stereocomplexation was gradually enhanced while the homo‐crystallization was suppressed. When a large amount of methanol was added, the homo‐crystallization was fully suppressed and the degree of stereocomplex crystallinity reached 90%. Similar results were obtained when another non‐solvent, hexane, was added to the casting solution in place of methanol. The effect of the addition of good and poor solvents such as tetrahydrofuran, ethanol, acetone and ethyl acetate was also studied. Copyright © 2011 Society of Chemical Industry     

Synthesis and characterization of star‐shaped poly(ethylene glycol)‐block‐poly(L‐lactic acid) copolymers by melt polycondensation

Compared with linear diblock or triblock poly(ethylene glycol)‐block‐poly(L ‐lactic acid) copolymer (PEG‐b‐PLLA), star‐shaped PEG‐b‐PLLA (sPEG‐b‐PLLA) copolymers exhibit smaller hydrodynamic radius and lower viscosity and are expected to display peculiar morphologies, thermal properties, and degradation profiles. Compared with the synthesis routine of PEG‐b‐PLLA form lactide and PEG, the traditional synthesis routine from LA and PEG were suffered by the low reaction efficiency, low purity, lower molecular weight, and wide molecular weight distribution. In this article, multiarm sPEG‐b‐PLLA copolymer was prepared from multiarm sPEG and L ‐lactic acid (LLA using an improved method of melt polycondensation, in which two types of sPEG, that is, sPEG₁ (four arm, Mn = 4300) and sPEG₂ (three arm, Mn = 3200) were chosen as the core. It was found the molecular weight of sPEG‐b‐PLLA could be strongly affected by the purity of LLA and sPEGs, and the purification technology of vacuum dewater and vacuum distillation could help to remove most of the impurities in commercial available LLA. The polymers, including sPEG and sPEG‐b‐PLLA with varied core (sPEG₁ and sPEG₂) and LLA/sPEG feeding ratios, were characterized and confirmed by ¹H‐NMR and ¹³C‐NMR spectroscopy, Fourier transform infrared spectroscopy (FT‐IR) and gel permeation chromatography, which showed that the terminal hydroxyl group in each arm of sPEGs had reacted with LLA to form sPEG‐b‐PLLA copolymers with fairly narrow molecular weight distribution. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

聚硅氧烷微球扩链改性聚乳酸熔体流动行为的研究

设计合成了带有甲基、巯基、环氧基、乙烯基、氨基、甲基丙烯酰氧丙基6种官能团的聚硅氧烷微球(PSQ),以2 %(质量分数,下同)的浓度与聚乳酸(PLA)熔融混合。结果表明,PSQ可以通过扩链反应有效改善PLA的熔体流动行为,其中聚环氧基硅氧烷微球(PESQ)与PLA的反应活性最高,其熔体流动速率最低,为6.0 g/10 min,相对于纯PLA的14.1 g/10 min,减小了1/2以上; PESQ改性PLA的相对分子质量提高了70.1 %;热失重5 %的热分解温度提高了8 ℃;基本可抑制PLA在加工35 min中的降解,冲击强度提高了2倍多。