Towards a one‐pot synthesis of a polystyrene–PMMA block copolymer via atom‐transfer radical polymerization

The solution atom‐transfer radical copolymerization of styrene and methyl methacrylate in butyl acetate at 110 °C in the presence of Cu(II) bromide and 2,2′‐bipyride was investigated. Polystyrene was polymerized by atom‐transfer radical polymerization using benzyl bromide as initiator and MMA was then added to the system. Block copolymers were formed when MMA was added at ≤90% styrene conversion. Molecular weight distributions (M_w/M_n) of the block copolymers were ≤1.5. The possibility of end‐capping the polystyrene precursor as a means of improving its initiating efficiency towards MMA was also investigated but did not improve the system. © 2002 Society of Chemical Industry     

原子转移自由基聚合法合成PS-g-PMMA

以氯乙酰化聚苯乙烯微球（PS-acyl-Cl）为大分子引发剂,甲基丙烯酸甲酯（MMA）为单体,CuCl/CuCl₂及N,N,N′,N′-四甲基乙二胺（TMEDA）为催化体系的原子转移自由基聚合反应,成功在PS-acyl-Cl表面接枝上PMMA分子链而获得聚苯乙烯 接枝 聚甲基丙烯酸甲酯（PS-g-PMMA）。考察了催化剂、反应温度、溶剂用量等条件对接枝反应的影响,优化的反应条件下,使用氯乙酰基担载量3.44 mmol.g^-1的PS-acyl-Cl,15 h可获得增重率687% 的PS-g-PMMA,且反应表现出一级动力学特征（k=513×10^-5 s^-1）。通过改变反应条件,可得到不同PMMA接枝链长的PS-g-PMMA。反应得到的PS-g-PMMA经水解后有望作为高担载量弱酸型离子交换树脂或进一步功能化后作为酶的柔性固定化载体。     

High yield synthesis of diverse well‐defined end‐functionalized polymers by combination of anionic polymerization and “click” chemistry

Well‐defined poly(methyl methacrylate) (M_n = 3630 g mol^?1, PDI = 1.06) with a primary benzylic bromide prepared using anionic polymerization was successfully transformed into diverse end‐functionalities (ω‐carboxyl, ω‐hydroxy, ω‐methyl‐vinyl, ω‐trimethylsilane, and ω‐glycidyl‐ether) via “click” reaction. The bromine end‐terminated poly(methyl methacrylate) was first substituted by an azide function and sequentially was reacted with various functional alkynes (propiolic acid, propargyl alcohol, 2‐methyl‐1‐buten‐3‐yne, propargyl trimethylsilane, and propargyl glycidylether). In all the cases, ¹H‐NMR, ¹³C NMR, FT‐IR, and GPC measurements show qualitative and quantitative transformation of the chain‐end poly(methyl methacrylate) into the desired functionalities with high conversion (above 99%). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of star polymers of hyperbranched polyglycerol core with multiarms of PS‐b‐PtBA and PS‐b‐PAA

Atom transfer radical polymerization (ATRP) was applied to synthesize a new kind of star polymers of hyperbranched polyglycerol (HPG) core with multiarms of PS‐b‐PtBA and PS‐b‐PAA by using the “core first” technique. The HPG core was obtained by anionic polymerization of glycerol first, and then the pendant hydroxyl groups of HPG were esterified with 2‐bromoisobutyryl bromide to yield the HPG‐g‐Br, which was used as macroinitiator for ATRP of the first monomer (St) and then second monomer (tBA). After hydrolysis of the PtBA block, poly(acrylic acid) (PAA) side chains were formed. The final products and intermediates were characterized by GPC, NMR, and FTIR in detail. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of poly(epichlorohydrin‐g‐methyl methacrylate) graft copolymers by the combination of cationic and atom transfer radical polymerization

Poly(epichlorohydrin) possessing chloromethyl side groups in the main chain was used in the atom transfer radical polymerization of methyl methacrylate and styrene to yield poly(epichlorohydrin‐g‐methyl methacrylate) and poly(epichlorohydrin‐g‐styrene graft copolymers. The polymers were characterized by ¹H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and fractional precipitation method. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2725–2729, 2006     

Synthesis of asymmetric H-shaped block copolymer by the combination of atom transfer radical polymerization and living anionic polymerization

A new asymmetric H-shaped block copolymer (PS)₂-PEO-(PMMA)₂ has been designed and successfully synthesized by the combination of atom transfer radical polymerization and living anionic polymerization. The synthesized 2,2-dichloro acetate-ethylene glycol (DCAG) was used to initiate the polymerization of styrene by ATRP to yield a symmetric homopolymer (Cl-PS)₂-CHCOOCH₂CH₂OH with an active hydroxyl group. The chlorine was removed to yield the (PS)₂-CHCOOCH₂CH₂OH ((PS)₂-OH). The hydroxyl group of the (PS)₂-OH, which is an active species of the living anionic polymerization, was used to initiate ethylene oxide by living anionic polymerization via DPMK to yield (PS)₂-PEO-OH. The (PS)₂-PEO-OH was reacted with the 2,2-dichloro acetyl chloride to yield (PS)₂-PEO-OCCHCl₂ ((PS)₂-PEO-DCA). The asymmetric H-shaped block polymer (PS)₂-PEO-(PMMA)₂ was prepared via ATRP of MMA at 130 °C using (PS)₂-PEO-DCA as initiator and CuCl/bPy as the catalyst system. The architectures of the asymmetric H-shaped block copolymers, (PS)₂-PEO-(PMMA)₂, were confirmed by ¹H NMR, GPC and FT-IR.     

Surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate from carbon fibre

Surface modification of carbon fibre (CF) by well‐defined polymer brushes was carried out using the ‘grafting from’ method. Poly(methyl methacrylate)‐grafted carbon fibre (CF‐PMMA) was successfully prepared by surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate (MMA) from the macro‐initiator, bromo‐acetic ester‐modified carbon fibre (CF‐BrA), with the complex of 1,10‐phenanthroline and Cu(I)Br as catalyst. The percentage of grafting (PG%) and the conversion of monomer (C%) increased linearly with increasing of polymerization time, and reached 24.0 % and 6.7 %, respectively, after a polymerization time of 6 h, calculated from the elemental analyses (EA). The structural and surface morphological analyses were conducted with Fourier‐transform infrared (FTIR) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Copyright © 2005 Society of Chemical Industry     

Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry     

Synthesis of water‐soluble polyphenol‐graft‐poly(ethylene oxide) copolymers via enzymatic polymerization and anionic polymerization

Water‐soluble polyphenol‐graft‐poly(ethylene oxide) (PPH‐g‐PEO) copolymers were prepared using grafting‐through methodology. Polyphenol chains were synthesized via enzymatic polymerization of phenols, and the graft chains were synthesized via living anionic polymerization of ethylene oxides. The polymers were characterized using gel permeation chromatography, static light scattering and ¹H NMR, infrared and ultraviolet spectroscopies. The PPH‐g‐PEO graft copolymers are soluble in several common solvents, such as water, ethanol, N,N‐dimethylformamide, tetrahydrofuran and methylene dichloride. The solubility of the PPH‐g‐PEO graft copolymers is improved significantly compared with that of polyphenol. Copyright © 2009 Society of Chemical Industry     

Nonaqueous emulsion copolymerization of ethyl methacrylate/lauryl methacrylate in propylene glycol. I. Evaluation of stabilizing efficiency for PEO‐PS‐PEO triblock copolymers

Sixteen poly(ethylene oxide)–polystyrene–poly(ethylene oxide) (PEO‐PS‐PEO) triblock copolymers were synthesized by anionic polymerization. They were characterized by gel permeation chromatography and proton NMR. The molecular weight of these 16 PEO‐PS‐PEO triblock copolymers ranged from 5100 to 13,300. The polystyrene (PS) block length was between 13 and 41. The PEO block length was between 41 and 106. The polydispersity index for these PEO‐PS‐PEO triblock copolymers were 1.05 ± 0.02. When using these stabilizers in the emulsion copolymerization of ethyl methacrylate and lauryl methacylate in propylene glycol, only a narrow window of stability was observed. Stable latexes were formed only when the molecular weights of the PEO blocks were within the range of 5300–7700 and the molecular weights of the PS blocks were 2000–4000. The stabilizer ability for these triblock copolymers was correlated with their molecular weight and conformation in propylene glycol. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1951–1962, 2001     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The synthesis of PHA‐g‐(PTHF‐b‐PMMA) multiblock/graft copolymers by combination of cationic and radical polymerization

A new and promising method for the diversification of microbial polyesters based on chemical modifications is introduced. Poly(3‐hydroxy alkanoate)‐g‐(poly(tetrahydrofuran)‐b‐poly(methyl methacrylate)) (PHA‐g‐(PTHF‐b‐PMMA)) multigraft copolymers were synthesized by the combination of cationic and free radical polymerization. PHA‐g‐PTHF graft copolymer was obtained by the cationic polymerization of THF initiated by the carbonium cations generated from the chlorinated PHAs, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) in the presence of AgSbF₆. Therefore, PHA‐g‐PTHF graft copolymers with hydroxyl ends were produced. In the presence of Ce⁺⁴ salt, these hydroxyl ends of the graft copolymer can initiate the redox polymerization of MMA to obtain PHA‐g‐(PTHF‐b‐PMMA) multigraft copolymer. Polymers obtained were purified by fractional precipitation. In this manner, their γ‐values (volume ratio of nonsolvent to the solvent) were also determined. Their molecular weights were determined by GPC technique. The structures were elucidated using ¹H‐NMR and FTIR spectroscopy. Thermal analyses of the products were carried out using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The inverse emulsion polymerization of acrylamide using poly(methyl methacrylate)‐graft‐polyoxyethylene as the stabilizer

Inverse emulsion polymerization of an aqueous solution of acrylamide (AM) in toluene is carried out using poly(methyl methacrylate)‐graft‐polyoxyethylene (PMMA‐g‐PEO) as an emulsifier. The kinetics of polymerization, morphology of the particle, and particle size of the inverse emulsion have been investigated. The rates of polymerization are found to be proportional to the initiator concentration, the monomer concentration, and the emulsifier concentration. The morphology of particles shows a spherical structure. The mechanism of inverse emulsion polymerization using amphipathic graft copolymer as the emulsifier is proposed. The resulting molecular weights of polyacrylamide are extremely high, and relate to the amphipathic graft copolymer structure. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 528–534, 2001     

Preparation of poly(methyl methacrylate)/titanium oxide composite particles via in‐situ emulsion polymerization

Poly(methyl methacrylate) (PMMA)/Titanium oxide (TiO₂) composite particles were prepared via in‐situ emulsion polymerization of MMA in the presence of TiO₂ particles. Before polymerization, the TiO₂ particles was modified by the silane coupling agent, which is crucial to ensure that PMMA reacts with TiO₂ via covalent bond bindings. The structure of the obtained PMMA/TiO₂ composite particles was characterized using Fourier transform infrared spectra (FTIR) and thermogravimetric analysis (TGA). The results indicate that there are covalent bond bindings between PMMA macromolecules and TiO₂ particles. Based on these facts, several factors affecting the resulting PMMA/TiO₂ composite system, such as the type of coupling agents, the mass ratio of the MMA to the modified TiO₂, the emulsifier concentration, and the initiator concentration, etc., were examined by the measurement of conversion of monomers, the gel content of polymers, the percentage of grafting, and the grafting efficiency, using gravity method or TGA method. As a result, the optimized recipe was achieved, and the percentage of grafting and the grafting efficiency could reach 216.86 and 96.64%, respectively. In addition, the obtained PMMA/TiO₂ composite particles were found to a stable colloidal dispersion in good solvent for PMMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4056–4063, 2006     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of graft copolymer polyethylene‐ graft‐poly(ethylene oxide) by a new anionic graft‐from polymerization

A series of amphiphilic graft copolymers, PE‐graft‐PEO, containing hydrophobic polyethylene (PE) as the backbone and hydrophilic poly(ethylene oxide) (PEO) as the side‐chain, have been synthesized by a novel route. The graft structure and the molecular weight, as well as the molecular weight distribution of the graft copolymer can easily be controlled. The molecular weight of the side‐chain PEO is proportional to the reaction time and the monomer concentration, which indicates the ‘living’ character of the anionic polymerization of ethylene oxide. The produced copolymers PE‐graft‐PEO were characterized by ¹H NMR and DSC measurements. Copyright © 2004 Society of Chemical Industry     

The potential of Cu(I)Cl/2,2′‐bipyridine catalysis in a triblock copolymer preparation by atom transfer radical polymerization

The ability of atom transfer radical polymerization (ATRP) in the sequential synthesis of triblock copolymers was examined using Cu(I)Cl/2,2′‐bipyridine catalysis at 110°C in toluene, starting from PMMA macroinitiators terminated with the C‐Br group. The PMMAs were prepared by living anionic or group transfer polymerization (GTP), followed by bromination of the respective active site with Br₂ or N‐bromosuccinimide (NBS). The yield of the terminal bromination in the products of both living polymerizations was 60–64% at best, compared with the yield of the bromination of 1‐methoxy‐(1‐trimethylsilyloxy)prop‐1‐ene (a model of the GTP active site) with NBS, as found by ¹H‐NMR. The PMMA macroinitiators prepared were utilized to start the sequential ATRP, finally affording PMMA‐b‐PBuA‐b‐PSt (M_n 69,100), PMMA‐b‐PSt‐b‐PBuA (M_n 21,300) and PMMA‐b‐PSt‐b‐PMMA (M_n 35,200), which have not yet been synthesized by ATRP. After the second block has been formed, the Br‐unterminated part of PMMA macroinitiator was removed by extraction or repeated precipitation. In the third (last) sequence polymerization, induction periods were observed. The first two triblock copolymers were free of precursors and have M_w/M_n values 1.5–1.6 (SEC). In the course of the last step of PMMA‐b‐PSt‐b‐PMMA synthesis, the content of the PMMA‐b‐PSt precursor slowly decreased with increasing MMA conversion. Still, at ≈90% MMA conversion, about 10–15% of the precursor remained in the product. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3514–3522, 2001     

Effect of in situ polymerization conditions of methyl methacrylate on the structural and morphological properties of poly(methyl methacrylate)/poly(acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene)‐g‐styrene) PMMA/AES Blends

In this study, the structural and morphological properties of poly(methyl methacrylate)/poly(acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene‐g‐styrene) (PMMA‐AES) blends were investigated with emphasis on the influence of the in situ polymerization conditions of methyl methacrylate. PMMA‐AES blends were obtained by in situ polymerization, varying the solvent (chloroform or toluene) and polymerization conditions: method A—no stirring and air atmosphere; method B—stirring and N₂ atmosphere. The blends were characterized by infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and dynamic mechanical analysis (DMA). The results showed that the PMMA‐AES blends are immiscible and present complex morphologies. This morphology shows an elastomeric dispersed phase in a glassy matrix, with inclusion of the matrix in the elastomer domains, suggesting core shell or salami morphology. The occlusion of the glassy phase within the elastomeric domains can be due to the formation of graft copolymer and/or phase inversion during polymerization. However, this morphology is affected by the polymerization conditions (stirring and air or N₂ atmosphere) and by the solvent used. The selective extraction of the blends' components and infrared spectroscopy showed that crosslinked and/or grafting reactions occur on the elastomer chains during MMA polymerization. The glass transition of the elastomer phase is influenced by morphology, crosslinking, and grafting degree and, therefore, T_g depends on the polymerization conditions. On the other hand, the behavior of T_g of the glassy phase with blend composition suggests miscibility or partial miscibility for the SAN phase of AES and PMMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of nano‐sized poly(ethylene oxide) star microgels via reversible addition‐fragmentation transfer polymerization in selective solvents

Poly(ethylene oxide) (PEO) star microgels with a cross‐linked polystyrene core were successfully prepared by reversible addition‐fragmentation transfer polymerization of styrene (St) and divinylbenzene (DVB) with dithiobenzoate‐terminated PEO monomethyl ether (DTB‐MPEO) as macro chain transfer agent in mixtures of ethanol and tetrahydrofuran (THF). The formation of star polymers was affected by polymerization time, solvents and St:DVB:DTB‐MPEO molar ratios. Narrow polydispersed star microgels with high molecular weight were obtained under appropriate polymerization conditions. Transmission electron micrographs suggest that PEO star polymers could form nano‐size spherical micelles in mixtures of water and THF, which further demonstrates the amphiphilic nature of the star polymers. Copyright © 2006 Society of Chemical Industry     

Synthesis and properties of liquid‐ crystalline triblock copolymers by ATRP,having electron‐transporting thiadiazole unit

ABA‐type block copolymers composed of 2,5‐diphenyl‐1,3,4‐thiadiazole (DPTD) oligoester and poly(methyl methacrylate) (PMMA) segments (M_n = 16 200 and 23 000) were synthesized by atom‐transfer radical polymerization and their liquid‐crystalline (LC) and photoluminescence (PL) properties were examined. The structures of block copolymers were identified by Fourier transform infrared and ¹H NMR spectroscopies. Differential scanning calorimetry measurement, polarizing microscopy observation and wide‐angle X‐ray analysis revealed that the block copolymers form thermotropic LC phase (smectic C) independent of molecular weights of PMMA segments, but a model polymer (PMMA segments having the DPTD unit in the central part) has no LC melt. Solution and solid‐state PL spectra indicated that all the block copolymers display blue emission arising from the DPTD unit. Their quantum yields are 17–21%, which increase with the PMMA chain lengths. The block copolymers have good aligned structures in the LC states, but their order parameter (S) values in sheared LC states were lower than those in the sheared LC compounds. The PL properties in the LC states were independent of the LC aligned structures. Cyclic voltammetry measurements showed that these block copolymers have deep HOMO levels compared with polymers composed of oxadiazole rings. Copyright © 2007 Society of Chemical Industry