Effect of the nature of crosslinking agent on the unusual metal ion specificity and selectivity of N,N‐bis(2‐aminoethyl)polyacrylamide

Metal ion desorbed crosslinked N,N‐bis(2‐aminoethyl)polyacrylamides showed enhanced specificity for the desorbed metal ion, and these polymers selectively rebind the desorbed metal ion from a mixture of metal ions. For this, polyacrylamide with 8 mol % divinylbenzene (DVB) and N,N′‐methylene‐bisacrylamide (NNMBA) crosslinking were prepared by solution polymerization. Diethylenetriamino functions were incorporated into the polymers by polymer analogous reactions. The complexing ability of the amino polymers were investigated toward various transition metal ions like Co(II), Ni(II), Cu(II), and Zn(II). Polymeric ligand and metal complexes were characterized by various spectral methods. The removal of the metal ion from the polymer matrix resulted in a memory for the desorbed metal ion. On rebinding, these polymers specifically rebind the desorbed metal ion and from a mixture of metal ions, it showed selectivity to the desorbed metal ion. Thus, the Cu(II) desorbed polymer specifically and selectively rebind Cu(II) ion from a mixture of Cu(II) and other metal ion. This selectivity is higher in the rigid DVB‐crosslinked system, resulting from the high rigidity of the crosslinked matrix compared to the semirigid NNMBA‐crosslinked system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and catalytic activity of 4 mol % N,N′‐methylene bisacrylamide crosslinked poly(acrylic acid)–metal complexes

The metal‐ion complexation behavior and catalytic activity of 4 mol % N,N′‐methylene bisacrylamide crosslinked poly(acrylic acid) were investigated. The polymeric ligand was prepared by solution polymerization. The metal‐ion complexation was studied with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) ions. The metal uptake followed the order: Cu(II) > Cr(III) > Mn(II) > Co(II) > Fe(III) > Zn(II) > Ni(II). The polymeric ligand and the metal complexes were characterized by various spectral methods. The catalytic activity of the metal complexes were investigated toward the hydrolysis of p‐nitrophenyl acetate (NPA). The Co(II) complexes exhibited high catalytic activity. The kinetics of catalysis was first order. The hydrolysis was controlled by pH, time, amount of catalyst, and temperature. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 272–279, 2004     

Effect of the nature and degree of crosslinking on the catalase‐like activity of polystyrene‐supported schiff base‐metal complexes

Catalase‐like activity of the metal complexes of various crosslinked polystyrene‐supported Schiff bases were carried out and correlated with the nature and degree of crosslinking in the polymer support. Polystyrenes with 2–20 mol % ethyleneglycol dimethacrylate (EGDMA), 1,4‐butanediol dimethacrylate (BDDMA) and 1,6‐hexanediol diacrylate (HDODA) were used as polymer supports. functions of diethylenetriamine and salicylaldehyde were incorporated to the chloromethylpolystyrene by polymer analogous reactions and complexed with Fe(II), Fe(III), Co(II), Ni(II), and Cu(II) ions. The metal uptake decreased in the order: Cu(II) > Co(II) > Ni(II) > Fe(III) > Fe(II), and extent of metal uptake by the various crosslinked system varied with the nature and degree of the crosslinking agent. The polymeric ligands and the metal complexes were characterized by various analytical techniques. The catalytic activities of these metal complexes were investigated towards the decomposition reaction of hydrogen peroxide. Generally among the various metal complexes, the catalytic activities decreased in the order: Co(II) > Cu(II) > Ni(II) > Fe(III) ? Fe(II). With increasing rigidity of the crosslinking agent their catalytic activity also decreased. Of the various crosslinked systems, the catalytic activity decreased in the order: HDODA‐ > BDDMA‐ > EGDMA‐crosslinked system. Also, the catalytic activity is higher for low crosslinked systems and decreased further with increasing degree of crosslinking. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1271–1278, 2004     

The effect of crosslinking on the adsorption behavior of copper (II) onto poly(2‐hydroxy‐4‐acryloyloxybenzophenone)

The adsorption behavior of Cu(II) ions onto poly(2‐hydroxy‐4‐acryloyloxybenzophenone), polymer I, and onto poly(2‐hydroxy‐4‐acryloyloxybenzophenone) crosslinked with different amounts of divinylbenzene (DVB), polymers II, III, and IV, in aqueous solutions was investigated using batch adsorption experiments as a function of contact time, pH, and temperature. The amount of metal ion uptake of the polymers was determined by using atomic absorption spectrometry (AAS) and the highest uptake was achieved at pH 7.0 and by using perchlorate as an ionic strength adjuster for polymers I, II, III, and IV. Results revealed that the adsorption capacity (q_e and Q_m) of Cu(II) ions decreases with increasing crosslinking due to the decrease of chelation sites. In addition, the rate of adsorption (k₂) of Cu(II) ions decreases with the increase of crosslinking because it becomes more difficult for Cu(II) ions to diffuse into the chelation sites. The isothermal behavior and the kinetics of adsorption of Cu(II) ions on these polymers with respect to the initial mass of the polymer and temperature were also investigated. The experimental data of the adsorption process was found to correlate well with the Langmuir isotherm model. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of the nature and degree of crosslinking on the Rose Bengal uptake by DVB‐, NNMBA‐, HDODA‐, and TTEGDA‐crosslinked aminopolyacrylamides

Polyacrylamides with 2–20 mol % divinyl benzene (DVB), N,N′‐methylene‐bisacrylamide (NNMBA), 1,6‐hexanediol diacrylate (HDODA), and tetraethyleneglycol diacrylate (TTEGDA) crosslinking and without crosslinking were prepared by free radical solution polymerization. Amino functions were incorporated into these polymers by transamidation with excess ethylenediamine. The dye uptake of nonprotonated and protonated aminopolyacrylamides was followed by batch equilibration method towards Rose Bengal (RB), Methyl Orange (MO), Methyl Red (MR), and Methylene Blue (MB). RB uptake by the polyacrylamide‐supported systems is higher than other dyes. Generally the dye uptake by the protonated systems is higher than the nonprotonated systems. To optimize the conditions of dye uptake, the effect of the concentration of RB solutions, temperature, and pH were followed. Kinetic studies showed that the uptake of RB by both nonprotonated and protonated crosslinked aminopolyacrylamides is a phase boundary process followed by three‐dimensional diffusion. The extent of RB uptake by the various systems depends on the nature and degree of crosslinking, and the relative rigidity/flexibility ofthe polyacrylamide support. Thus, the dye uptake followed the order: linear > NNMBA‐ > DVB‐ > TTEGDA‐ > HDODA‐crosslinked system. The dye uptake followed the same trend as the variation of amino capacity with degree of crosslinking in the respective crosslinked system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Chelation properties of poly(2‐hydroxy‐4‐acryloyloxybenzophenone) resins toward some divalent metal ions

The chelation behavior of poly(2‐hydroxy‐4‐acryloyloxybenzophenone) [poly(2H4ABP) or polymer I ] obtained through the free‐radical polymerization of 2‐hydroxy‐4‐acryloyloxybenzophenone monomer and for crosslinked polymers prepared from the monomer and known amounts of the crosslinker divinylbenzene (DVB) [4 mol % of DVB for polymer II, 8 mol % of DVB for polymer III, and 16 mol 16% of DVB for polymer IV ] toward the divalent metal ions Cu²⁺, Ni²⁺, Zn²⁺, and Pb²⁺ in aqueous solution was studied by a batch equilibration technique as a function of contact time and pH. The effect of the crosslinker, DVB, was also studied. The metal‐ion uptake of the polymers was determined with atomic absorption spectroscopy, and the highest uptake was achieved at pH 7.0 for polymers I, II, III, and IV. The selectivity and binding capacity of the resins toward the investigated divalent metal ions are discussed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

N,N′-methylene-bis-acrylamide-crosslinked polyacrylamides as supports for dithiocarbamate ligands for metal ion complexation

The complexation behaviour of dithiocarbamate functions supported on polyacrylamides with varying extents (2-20 mol%) of N,N′-methylene-bis-acrylamide (NNMBA) crosslinks was investigated. The crosslinked polyacrylamides were prepared by the free radical solution polymerization of the monomers in water at 80°C using potassium persulphate as initiator. The dithiocarbamate ligands were introduced by polymer-analogous reaction involving transamidation with ethylenediamine and dithiocarbamylation with carbon disulphide and alkali. The complexation behaviour of these dithiocarbamate resins with the ligand functions in different macromolecular environments were investigated towards Co(II), Ni(II), Cu(II), Zn(II) and Hg(II) ions by a batch equilibration technique. The metal ion intake varied with the extent of the NNMBA-crosslinking. Thus the 8% crosslinked system has the highest complexation capacity. The values for metal ion intake followed the order Hg(II)> Cu(II)> Zn(II)> Ni(II)> Co(II). The time-course of complexation, the possibility of recycling and the swelling characteristics of the uncomplexed and complexed resins were considered, and IR characterization and thermal studies were undertaken. The swelling values of the complexed resins are lower than those of the uncomplexed resins. The thermal stability of dithiocarbamates varied with the extent of NNMBA-crosslinks and with the metal ion.     

Synthesis of water‐insoluble functional copolymers containing amide,amine, and carboxylic acid groups and their metal‐ion‐uptake properties

The crosslinked poly[N‐(3‐dimethylamino)propylmethacrylamide] [P(NDAPA)] and poly[N‐(3‐dimethylamino)propylmethacrylamide‐co‐acrylic acid] [P(NDAPA‐co‐AA)] were synthesized by radical polymerization. The resins were completely insoluble in water. The metal‐ion‐uptake properties were studied by a batch equilibrium procedure for the following metal ions: silver(I), copper(II), cadmium(II), zinc(II), lead(II), mercury(II), chromium(III), and aluminum(III). The P(NDAPA‐co‐AA) resin showed a lower metal‐ion affinity than P(NDAPA), except for Hg(II), which was retained at 71% at pH 2. At pH 5, the resin showed a higher affinity for Pb(II) (80%) and Cu(II) (60%), but its affinity was very low for Zn(II) and Cr(III). The polymer ligand–metal‐ion equilibrium was achieved during the first 20 min. By changing the pH, we found it possible to remove between 60 and 70% of Cd(II) and Zn(II) ions with (1M, 4M) HClO₄ and (1M, 4M) HNO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5232–5239, 2006     

Metal ion adsorption behavior of poly[3‐(dimethylamine)propyl acrylate] and poly[3‐(dimethylamine)propylacrylate‐co‐acrylic acid] resins

Two resins were synthesized by radical polymerization using N,N′‐methylene‐bis‐acrylamide and ammonium persulfate as the crosslinking reagent and initiator, respectively. The yields were 98%. The resins were characterized by FTIR and UV‐Vis spectroscopy. Sorption behavior of resins toward Hg(II), Cd(II), Zn(II), Pb(II), and Cr(III) ions was studied at different pHs depending on the metal ion. Both resins showed selective sorption to Hg(II) ions at pH 2 from a mixture of all ions.The elution of Hg(II) bound to the resins was also investigated using perchloric acid at different concentrations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1251–1256, 2002; DOI 10.1002/app.10455     

Polyelectrolyte‐assisted removal of metal ions with ultrafiltration

The water‐soluble polymers poly(styrene sulfonic acid‐co‐maleic acid) and poly(acrylic acid‐co‐maleic acid) were investigated with respect to their metal‐ion‐binding ability with ultrafiltration. The studied metal ions included Ag(I), Cu(II), Ni(II), Co(II), Ca(II), Mg(II), Pb(II), Cd(II), Zn(II), Al(III), and Cr(III) ions. The retention properties of the polyelectrolytes for the metal ions depended strongly on the ligand type. As for the carboxylate ligands, with increasing concentration and pH, the metal‐binding affinity increased. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1091–1099, 2005     

Synthesis of 1,4,8,11‐tetraazacyclotetradecane monomer by addition of acryloyl chloride and its polymer for specific transition metal binding

1,4,8,11‐Tetraazacyclotetradecane (cyclam) was reacted with acryloyl chloride in a 1 : 2 molar ratio in dichloromethane in the presence of pyridine at 0°C. The modified cyclam was polymerized by adding an azobisisobutyronitrile initiator and irradiated with a UV lamp under reflux for 6 h. Precipitated cyclam containing polymer in the bulk structure was removed from the suspension by filtration. After washing and drying the final polymeric materials were used for transition metal ion adsorption and desorption studies. A Fourier transform IR spectrophotometer and thermogravimetric analyzer were used to characterize the polymeric structure. The affinity of the polymeric material for transition metal ions was used to test the adsorption–desorption of selected ions [Cu(II), Ni(II), Co(II), Cd(II), Pb(II)] from aqueous media containing different amounts of these metal ions (5–800 ppm) at different pH values (2.0–8.0). It was found that the adsorption rates were high and the adsorption equilibrium was reached in about 30 min. The uptake of the transition metal ions onto the polymer from solutions containing a single metal ion was 3.17 mmol/g for Cu(II), 0.98 mmol/g for Cd(II), 0.79 mmol/g for Co(II), 0.78 mmol/g for Ni(II), and 0.32 mmol/g for Pb(II). This polymer showed high affinity for Cu(II) compared to the other metal ions in the single ion solution and in the mixture of transition metal ions. The affinity order of the transition metal ions was Cu(II) ? Ni(II) > Cd(II) > Co(II) > Pb(II) for competitive adsorption. More than 95% of the adsorbed transition metal ions were desorbed in 2 h in a desorption medium containing 1.0M HNO₃. Poly(cyclam) was found to be suitable for repeated use of more than five cycles without a noticeable loss of adsorption capacity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1406–1414, 2002     

Water‐sorption and metal‐uptake behavior of pH‐responsive poly (N‐acryloyl‐N′‐methylpiperazine) gels

Hydrogels based on N‐acryloyl‐N′‐methylpiperazine (AcrNMP) swelled extensively in solutions of low pH due to the protonation of the tertiary amine. The water transport in the gels under an acidic condition was non‐Fickian and nearly Fickian in neutral pH with the collective diffusion coefficients determined as 2.08 × 10⁻⁷ and 5.00 × 10⁻⁷ cm⁻² s⁻¹, respectively. These gels demonstrated good metal‐uptake behavior with various divalent metal ions, in particular, copper and nickel, with the uptake capacity increased with increasing pH. The swelling ratio of the gel in the presence of metal ions decreased with increasing metal ion uptake. The results suggest that high metal ion uptake can lead to physical crosslinking arising from the interchain metal complex formation. The metal‐loaded gels could be stripped easily with 1M H₂SO₄ without any loss in their uptake capacity. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 268–273, 2001     

Equilibrium swelling and solvation studies on crosslinked polyacrylamides

Polyacrylamide (PA) crosslinked with four different crosslinking agents, triethyleneglycol dimethacrylate (TEGDMA), N,N′‐methylene bisacrylamide (NNMBA), hexanediol dimethacrylate (HDDMA) and divinylbenzene (DVB), with mole percents ranging from 5 to 20, was prepared by solution polymerization and subjected to swelling and solvation studies. Solubility parameters and cohesive energy density were determined from swelling studies. Molecular weight between crosslinks for these systems were determined by Flory–Rehner analysis. There is a discontinuous volume change for 10% NNMBA and HDDMA crosslinked PA, 15% TEGDMA crosslinked PA and 10 and 15% DVB crosslinked PA in solvent mixtures of acetic acid and water due to phase change occurring at this stage. The hydrogels exhibit inhomogeneous crosslink distribution due to multiple crosslinking, cyclization and network irregularity owing from arising from entanglements. As the percentage of crosslinking increases, crosslinks become more homogeneous due to a decrease in entanglements. Copyright © 2004 Society of Chemical Industry     

Metal ion retention properties of poly(acrylic acid) and poly[N‐3‐(dimethylamino)propyl acrylamide‐co‐acrylic acid]

The crosslinked resins poly(acrylic acid) (PAA) and poly[N‐3‐(dimethylamino)propyl acrylamide‐co‐acrylic acid] [P(NDAPA‐co‐AA)] are obtained by radical polymerization and characterized by FTIR spectroscopy. PAA at basic pH exists basically as an acrylate anion that may contain end carboxylate groups or form bridges acting as mono‐ or bidentate ligands. P(NDAPA‐co‐AA) presents three potential ligand groups in its structure: carboxylic acid, amide, and amine. The trace metal ion retention properties of these two resins is compared by using the batch equilibrium procedure. The metal ions are contained in saline aqueous solutions and are found in natural seawater. The retention of Cu(II), Pb(II), Cd(II), and Ni(II) metal ions is studied under competitive and noncompetitive conditions. The effects on the pH, contact time, amount of adsorbent, temperature, and salinity are investigated. The PAA resin presents a high affinity (>80%) for Cu(II) and Cd(II) ions. The P(NDAPA‐co‐AA) resin shows a high affinity for Pb(II) and Cd(II) ions. With 4M HNO₃ it is possible to completely recover the PAA resin charged with Cu(II) ions and the P(NDAPA‐co‐AA) resin charged with Pb(II) ions. The two resins show a high affinity for Cd(II) ions from the seawater containing Cu(II) and Cd(II) ions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1385–1394, 2005     

Thermal properties of poly(maleic anhydride‐alt‐acrylic acid) in the presence of certain metal chlorides

Polychelates were synthesized by the addition of aqueous solutions of copper(II), cadmium(II), and nickel(II) chlorides to aqueous solutions of poly(maleic anhydride‐alt‐acrylic acid) [poly(MA‐alt‐AA)] in different pH media. The thermal properties of poly(MA‐alt‐AA) and its metal complexes were investigated with thermogravimetry and differential scanning calorimetry (DSC) measurements. The polychelates showed higher thermal stability than poly(MA‐alt‐AA). The thermogravimetry of the polymer–metal complexes revealed variations of the thermal stability by complexation with metal ions. The relative thermal stabilities of the systems under investigation were as follows: poly(MA‐alt‐AA)–Cd(II) > poly(MA‐alt‐AA)–Cu(II) > poly(MA‐alt‐AA)–Ni(II) > poly(MA‐alt‐AA). The effects of pH on the complexation and gravimetric analysis of the polychelates were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3926–3930, 2006     

Monodisperse plum‐like sulfonated PGMA‐DVB microspheres as a new ion exchange resin

Monodisperse plum‐like crosslinked poly(glycidyl methacrylate‐co‐divinyl benzene) (PGMA‐DVB) microspheres were prepared by dispersion polymerization using glycidyl acrylate as monomer and divinyl benzene as crosslinking agent, and then sulfonated by sulfonation process with phosphorus pentoxide to increase the grafting ratio. The morphology and composition of microspheres were characterized by scanning electron microscope with energy dispersive analysis of X‐rays (SEM‐EDX), Fourier transform infrared spectroscopy (FT‐IR), thermogravimetric analysis (TGA), and BET surface area analyses. The average sizes of PGMA microspheres and PGMA‐DVB microspheres were 2.18 and 2.52 μm, respectively. The effect of DVB content on the properties of microspheres was investigated and the experimental results indicate that the microspheres prepared with DVB content have crinkled surface with large specific surface area, and with the increase of the DVB content, the average size of the microspheres become larger and the particle size distribution become wider. The as‐prepared sulfonated PGMA‐DVB microspheres were used to remove the copper (II) ion in solution and the maximum adsorption capacity was 75.08 mg/g. This work provides an effective but simple method for a controllable preparation of polymer microspheres with rough surface and high specific surface area, and it could be a new kind of ion exchange resin after sulfonation. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44994.     

Water‐soluble amine and imine polymers with the ability to bind metal ions in conjunction with membrane filtration

The commercial polymers poly(ethylene imine) (PEI), poly(ethylene imine epichlorohydrin), and poly(dimethylamine‐co‐epichlorohydrin) were purified and fractionated by ultrafiltration. Their metal‐ion‐binding properties with respect to different ligand groups and the effect of the concentration on the retention properties were investigated. The amine ligands of the polymers formed the most stable complexes with the metal ions. In general, there was an effect of the pH and polymer fraction size on the retention properties. As the pH and polymer fraction size increased, the affinity to bind metal ions also increased. PEI had the highest metal‐retention values, particularly at higher pHs, at which the amine groups were nonprotonated and could coordinate easily with the metal ions. Only Pb(II) was poorly retained. The affinity for all the metal ions, except Pb(II), increased significantly at pH 5. The metal‐ion retention decreased quickly as the filtration factor increased, except for Cu(II), Co(II), Ni(II), Cd(II), and Zn(II) ions, which were retained by over 40% at a filtration factor of 4. For other metal ions such as Pb(II), Ca(II), and Mg(II), only 10% remained bound to the polymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 222–231, 2005     

Trace metal ion retention properties of crosslinked poly(4‐vinylpyridine) and poly(acrylic acid)

The crosslinked resins poly(4‐vinylpiridine) (PVPy) and poly(acrylic acid) (PAA) were obtained by radical polymerization. PVPy shows monodentate ligands and PAA at basic pH is basically as acrylate anion, which can contain end‐carboxylates groups or form a bridge acting as mono‐ or bidentate ligands. The retention properties for trace metal ions from saline aqueous solutions and natural seawaters of these two resins were investigated by Batch equilibrium procedure. The metal ions studied were Cu(II), Pb(II), Cd(II), and Ni(II). The following effects were studied: pH, contact time, amount of the adsorbent, temperature, and salinity. The resin PVPy showed a high affinity for Cd(II) and PAA for Cu(II) and Cd(II). The metal ions were determined in the filtrate by atomic absorption spectrometry. By the treatment of the loaded resin with 4M HNO₃, it was possible to remove completely the Cu(II) ions. The retention properties of the resins were studied for trace metal ions present in the natural seawaters. Both resins showed a high affinity for Cd(II) when the natural seawater contained Cu(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2908–2916, 2004     

Acrylonitrile/acrylamidoxime/2‐acrylamido‐2‐ methylpropane sulfonic acid‐based hydrogels: Synthesis,characterization and their application in the removal of heavy metals

Crosslinked acrylonitrile/acrylamidoxime/2‐acrylamido‐2‐methylpropane sulfonic acid (AN/AAx/AMPS)‐based hydrogels were prepared by free radical crosslinking solution polymerization technique. The chemical structures of the hydrogels were characterized by FT‐IR analysis. The morphology of the dry hydrogel sample was examined by scanning electron microscope (SEM). These hydrogels were used for the removal of Cd(II), Cu(II), and Fe(III) ions from their aqueous solutions. The influence of the uptake conditions such as pH, time and initial feed concentration on the metal ion binding capacity of hydrogel was also tested. The selectivity of the hydrogel towards the different metal ions tested was arranged in the order of Cd(II) > Fe(III) > Cu(II). It was observed that the specific interaction between metal ions and ionic comonomer in the hydrogel affected the metal binding capacity of the hydrogel. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and metal ion adsorption studies of chelating resins derived from macroporous glycidyl methacrylate‐divinylbenzene copolymer beads anchored schiff bases

Two novel chelating resins are prepared by anchoring diethylenetriamine bis‐ and mono‐furaldehyde Schiff bases onto the macroporous GMA‐DVB copolymer beads and utilized for the adsorption towards Cu(II), Co(II), Ni(II), and Zn(II). FTIR spectra show that Schiff base groups have been successfully introduced into the polymer matrix and the chelating resins can form complexes with the metal ions. The chelating resins show a higher adsorption capacity toward Cu(II). The conductivity method can be used for determining the adsorption kinetics of the resins towards metal ions. The results show that the adsorption rates towards Cu(II) are much higher than those towards other ions and pseudo second‐order and intraparticle diffusion models can be applied to treat the adsorption amount‐time data. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010