Activated slag as an additive to rubberized unsaturated polyester composite: Thermal and mechanical study

Slag is by‐product of iron‐making industry and is commonly used in concrete working; however, the application of such inorganic material as an additive in the polymer composites field is quite new and has not yet been really explored. The current investigation reports the potential of virgin slag, strong polar acid activated slag and organic treated slag as reinforcement, fire and thermal resistance additive for rubberized, unsaturated polyester (R‐UPE) composites. The slag was subjected to three pretreatments, the first was mechanical (comminution) to reduce the particle size, the second was chemical activation by strong polar acid namely H₂SO₄, and the third was coating by organic stearic acid. The effectiveness of chemical activation and coating of the slag was followed by EDX and infrared attenuated total reflectance (ATR‐IR). The potential of activated and coated slag as reinforcement for rubberized, unsaturated polyester resin was evaluated and compared to the sample with pristine slag. The fabricated composites were evaluated with respect to their mechanical mechanical behavior. Thermal behavior was inspected using behavior using differential scanning calorimeter (DSC), dynamic mechanical analysis (DMA) was investigated. Fire resistance of the R‐UPE containing slag was performed by direct exposure of the sample to torch. It has been found that the activated slag has improved the concerned properties. The observed findings were related to the role of activated and coated to interact with the R‐UPE matrix via polar–polar interaction due to the development of surface functional groups after chemical activation. J. VINYL ADDIT. TECHNOL., 26:173–179, 2020. © 2019 Society of Plastics Engineers     

Investigation of unsaturated polyester composites reinforced by aspen high‐yield pulp fibers

Aspen chemithermomechanical pulp fiber‐reinforced unsaturated polyester (UPE) composites were fabricated using premade paper handsheets. The effects of handsheet wet‐pressing pressure, grammage, and subsequent fabrication methods on the composite properties were evaluated. The composites obtained using the optimum process parameters had tensile moduli and tensile strengths comparable with those of traditional glass fiber‐reinforced UPE composites. The pressed composites had very consistent tensile moduli that were well fitted by the Halpin–Tsai and Tsai–Pagano models. The classical Kelly‐Tyson and Bowyer‐Bader models significantly underestimated the composite tensile strengths and the potential reasons for this discrepancy are discussed. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

Preparation and characterization of bismaleimide (N,N′‐bismaleimido‐4,4′‐diphenyl methane)–unsaturated polyester modified epoxy intercrosslinked matrices

An intercrosslinked network of unsaturated polyester–bismaleimide modified epoxy matrix systems was developed. Epoxy systems modified with 10, 20, and 30% (by weight) of unsaturated polyester were made by using epoxy resin and unsaturated polyester with benzoyl peroxide and diaminodiphenylmethane as curing agents. The reaction between unsaturated polyester and epoxy resin was confirmed by IR spectral studies. The unsaturated polyester toughened epoxy systems were further modified with 5, 10, and 15% (by weightt) of bismaleimide (BMI). The matrices, in the form of castings, were characterized for their mechanical properties. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) of the matrix samples were performed to determine the glass transition temperature (T_g) and thermal degradation temperature of the systems, respectively. Mechanical properties, viz: tensile strength, flexural strength, and plain strain fracture toughness of intercrosslinked epoxy systems, were studied by ASTM methods. Data obtained from mechanical and thermal studies indicated that the introduction of unsaturated polyester into epoxy resin improves toughness but with a reduction in glass transition, whereas the incorporation of bismaleimide into epoxy resin improved both mechanical strength and thermal behavior of epoxy resin. The introduction of bismaleimide into unsaturated polyester‐modified epoxy resin altered thermomechanical properties according to their percentage concentration. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2853–2861, 2002     

Blended Epoxy/Polyester Polymer Nanocomposites: Effect of “Nano” on Mechanical Properties

The inter-cross-linked networks of unsaturated polyester (UP) toughened epoxy blends were developed. Montmorillonite (MMT) clay was dispersed into the same system to prepare blended epoxy/UP/clay nanocomposites in different weight ratios viz. 0%, 1%, 2%, 3% and 5%. Mechanical properties like tensile strength (TS), impact strength (IS) and interlaminar shear strength (ILSS) were characterized for the above nanocomposites. Blended nanocomposites were fabricated by high shear mechanical mixing followed by ultra-sonication process to get homogeneous mixing under the aid of in situ polymerization. Mechanical properties were studied as per ASTM standards. Data obtained from mechanical property studies indicated that the introduction of UP into epoxy resin improved the impact strength to an appreciable extent. Impact strength (IS) and tensile strength (TS) were significantly improved and optimized at 3 wt. % clay content when compared with neat blend (0 wt. % clay) composites. The homogeneous morphologies of the UP toughened epoxy and epoxy/UP/clay nanocomposite systems were ascertained using scanning electron microscope (SEM) studies.     

Chemical treatment of wood fiber and its reinforced unsaturated polyester composites

In order to enhance the interfacial adhesion between wood fiber and an unsaturated polyester matrix (UPE), acrylic acid (acrylic acid)/poly(methyl methacrylate), and (acrylic acid)/silanization (AAS) were used to treat the wood fibers. The mechanical properties and the impact fracture surfaces of the prepared composites were measured and characterized, and the fracture mechanism of these kinds of composites was analyzed. The results showed that the AAS composites possessed the optimum comprehensive mechanical properties. When the weight fraction of wood fiber was 16%, the flexural strength and flexural modulus of the AAS composites were increased by 28.9 and 51.8%, respectively, compared to those of untreated composites. The highest tensile strength and lowest water absorption were also noted for AAS composites. These composites possessed the strongest interfacial adhesion between wood fiber and the UPE matrix. J. VINYL ADDIT. TECHNOL., 19:18–24, 2013. © 2013 Society of Plastics Engineers     

Tuning the interlaminar shear strength and thermo-mechanical properties of glass fiber composites by incorporation of (3-mercaptopropyl) trimethoxysilane-functionalized carbon black

The incorporation of functionalized nanoscale fillers into traditional glass fiber/unsaturated polyester (GF/UPE) composites provides a more robust mechanical attributes. The current study demonstrates the potential of 3-mercaptopropyl trimethoxysilane (MPTS)-functionalized carbon black (f-CB) for enhancing the thermo-mechanical properties of GF composites. The composites infused with 1, 3 and 5 wt% of pristine and MPTS-functionalized CB were fabricated by hand lay-up and hot press processing. Tensile testing, interlaminar shear strength (ILSS) testing and dynamic mechanical analysis were used to evaluate the performance of nanocomposites. Fourier transform infrared spectroscopy validated the MPTS functionalization of CB. Pristine CB-loaded nanocomposites exhibited marginal improvement in ultimate tensile strength (UTS), ILSS and thermo-mechanical properties. However, with the addition of f-CB, the improvement in all the studied properties was more substantial. The inclusion of 5 wt% f-CB increased the elastic modulus and UTS by 16 and 22%, respectively, whereas the ILSS was enhanced by 36%, in comparison to the neat GF composite. The scanning electron microscope analysis of fractured ILSS samples revealed better fiber-matrix adhesion and compatibility in f-CB-loaded nanocomposites. At the same filler weight percentage, the storage modulus at 25 °C was ~ 19% higher than that of neat composite. The f-CB inclusion resulted in increment of T _g by ~ 13 °C over the T _g of neat GF/UPE composite (~ 109 °C). These improvements were due to the chemical connection of f-CB to the UPE matrix and GF surface. With such improvements in thermal and mechanical properties, these nanocomposites can replace the conventional GF composites with prominent improvements in performance.     

Investigation on Physico-Mechanical Properties,Water, Thermal and Chemical Ageing of Unsaturated Polyester/Turmeric Spent Composites

Nutraceutical industrial residues are potential fillers to fabricate green or eco-friendly polymeric composite materials as they are, less costly and easily available. Attempts have been made to use turmeric spent (TS)—a nutraceutical industry waste with a high E-factor to improve need-based properties of plastics. A series of unsaturated polyester resin composites have been fabricated with different turmeric spent content viz., 5, 10, 15 and 20% w/w. The effect of amount of filler content on tensile strength, physical properties including density and surface hardness and chemical resistance of the composites were determined. The influence of water and thermal ageing on the tensile strength of turmeric filler loaded unsaturated polyester composites has been studied.     

FRP composites based on different types of glass fibers and matrix resins: A comparative study

Flexural properties, impact energy, heat deflection temperature, and resistance to thermal and hydrothermal degradation of composites based on E-glass and N-glass fibers as the reinforcing agents, and epoxy, unsaturated polyester, phenolic, and epoxy-phenolic resin systems as the matrix materials were studied and compared. As a reinforcing agent E-glass fiber is superior to N-glass fiber, particularly with respect to development of flexural strength and modulus, impact strength, and thermal resistance; N-glass fiber, however, imparts to the composites substantially higher resistance to hydrothermal degradation under boiling conditions in different chemical environments. For use of both E-glass and N-glass fibers as reinforcing agents, the general order of resistance to hydrothermal degradation for the composites based on different matrix resins is epoxy > phenolic > unsaturated polyester resin. Incorporation of a low dose of a rubbery polymer, such as styrene butadiene rubber (0.1–0.2%) and liquid polybutadiene (0.5–0.75%), in unsaturated polyester resin as the matrix resin measurably enhances impact energy of the composite. © 1995 John Wiley & Sons, Inc.     

Thermo mechanical behaviour of unsaturated polyester toughened epoxy–clay hybrid nanocomposites

The intercrosslinked networks of unsaturated polyester (UP) toughened epoxy–clay hybrid nanocomposites have been developed. Epoxy resin (DGEBA) was toughened with 5, 10 and 15% (by wt) of unsaturated polyester using benzoyl peroxide as radical initiator and 4,4′-diaminodiphenylmethane as a curing agent at appropriate conditions. The chemical reaction of unsaturated polyester with the epoxy resin was carried out thermally in presence of benzoyl peroxide-radical initiator and the resulting product was analyzed by FT-IR spectra. Epoxy and unsaturated polyester toughened epoxy systems were further modified with 1, 3 and 5% (by wt) of organophilic montmorillonite (MMT) clay. Clay filled hybrid UP-epoxy matrices, developed in the form of castings were characterized for their thermal and mechanical properties. Thermal behaviour of the matrices was characterized by differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA) and dynamic mechanical analysis (DMA). Mechanical properties were studied as per ASTM standards. Data resulted from mechanical and thermal studies indicated that the introduction of unsaturated polyester into epoxy resin improved the thermal stability and impact strength to an appreciable extent. The impact strength of 3% clay filled epoxy system was increased by 19.2% compared to that of unmodified epoxy resin system. However, the introduction of both UP and organophilic MMT clay into epoxy resin enhanced the values of mechanical properties and thermal stability according to their percentage content. The impact strength of 3% clay filled 10% UP toughened epoxy system was increased by 26.3% compared to that of unmodified epoxy system. The intercalated nanocomposites exhibited higher dynamic modulus (from 3,072 to 3,820 MPa) than unmodified epoxy resin. From the X-ray diffraction (XRD) analysis, it was observed that the presence of d ₀₀₁ reflections of the organophilic MMT clay in the cured product indicated the development of intercalated clay structure which in turn confirmed the formation of intercalated nanocomposites. The homogeneous morphologies of the UP toughened epoxy and UP toughened epoxy–clay hybrid systems were ascertained from scanning electron microscope (SEM).     

Effect of fiber surface treatment on the properties of biocomposites from nonwoven industrial hemp fiber mats and unsaturated polyester resin

Biocomposites were made with nonwoven hemp mats and unsaturated polyester resin (UPE). The hemp fiber volume fraction was optimized by mechanical testing. The effect of four surface treatments of industrial hemp fibers on mechanical and thermal properties of biocomposites was studied. The treatments done were alkali treatment, silane treatment, UPE (matrix) treatment, and acrylonitrile treatment. Bending strength, modulus of elasticity, tensile strength, tensile modulus, impact strength, storage modulus, loss modulus, and tan δ were evaluated and compared for all composites. The mechanical as well as thermal properties of the biocomposites improved after surface treatments. The properties of the above biocomposites were also compared with E‐glass–mat composite. To achieve balance in properties, a hybrid composite of industrial hemp and glass fibers was made. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1055–1068, 2006     

Acrylated epoxidized soybean oil as a styrene replacement in a dicyclopentadiene‐modified unsaturated polyester resin

Nonvolatile and nonhazardous acrylated epoxidized soybean oil (AESO) was investigated as a replacement for hazardous styrene in a commercial unsaturated polyester (UPE) resin [a mixture of styrene and a dicyclopentadiene (DCPD)‐modified UPE (DCPD–UPE)]. DCPD–UPE was prepared from ethylene glycol, diethylene glycol, maleic anhydride, and DCPD. Mixtures of AESO and DCPD–UPE [AESO–(DCPD–UPE) resins] were found to be homogeneous, easily pourable solutions at room temperature. The glass‐fiber‐reinforced composites from the AESO–(DCPD–UPE) resins were comparable or even superior to those from the mixture of styrene and DCPD–UPE in terms of the flexural and tensile strengths. The viscoelastic properties of the cured AESO–(DCPD–UPE) resins and the corresponding glass‐fiber‐reinforced composites were characterized by dynamic mechanical analysis. The viscosities and pot lives of the AESO–(DCPD–UPE) resins as a function of the temperature were studied. The curing mechanism of the AESO–(DCPD–UPE) resins is discussed. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46212.     

Chain extension reactions of unsaturated polyesters with epoxy compounds

Unsaturated polyesters (UPE) were chain extended with three different epoxy group containing compounds. The molecular weight increase was monitored using gel permeation chromatography (GPC). The polymers obtained were characterized by FTIR and ¹H NMR, and styrene solubility and gel time. The polyesters were then diluted with styrene and cured with a radical initiator and compared with a commercial reference polyester. Thermal and mechanical properties of the cured polyesters were characterized by dynamic mechanical analysis (DMA) and thermal gravimetric analysis (TGA). The results show that UPE can be chain extended with epoxy containing compounds which substantially shortens the condensation polymerization during manufacture, without compromising their thermal and mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study of jute fiber reinforced polyester composites by dynamic mechanical analysis

Cyanoethylation of jute fibers in the form of nonwoven fabric was studied, and these chemically modified fibers were used to make jute–polyester composites. The dynamic mechanical thermal properties of unsaturated polyester resin (cured) and composites of unmodified and chemically modified jute–polyester were studied by using a dynamic mechanical analyzer over a wide temperature range. The data suggest that the storage modulus and thermal transition temperature of the composites increased enormously due to cyanoethylation of fiber. An increase of the storage modulus of composites, prepared from chemically modified fiber, indicates its higher stiffness as compared to a composite prepared from unmodified fiber. It is also observed that incorporation of jute fiber (both unmodified and modified) with the unsaturated resin reduced the tan δ peak height remarkably. Composites prepared from cyanoethylated jute show better creep resistance at comparatively lower temperatures. On the contrary, a reversed phenomenon is observed at higher temperatures (120°C and above). Scanning electron micrographs of tensile fracture surfaces of unmodified and modified jute–polyester composites clearly demonstrate better fiber–matrix bonding in the case of the latter. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1505–1513, 1999     

用环氧环己烷制备不饱和聚酯树脂的研究

介绍了用环氧环己烷合成不饱和聚酯树脂， 并将其与通用聚酯树脂（ ＵＰＥ） 进行物化性能方面的比较。结果表明， 用环氧环己烷合成的树脂具有良好的耐酸、耐碱、耐热性能和较好的机械性能。     

Preparation and characterization of bismaleimide (N,N′‐bismaleimido‐4,4′‐diphenyl methane)–vinyl ester oligomer–modified unsaturated polyester interpenetrating matrices for advanced composites

Interpenetrating networks of varying percentages of bismaleimide (BMI) in vinyl ester oligomer (VEO) modified unsaturated polyester (UP) matrices have been developed. Vinyl ester oligomer was prepared by reacting commercially available epoxy resin GY 250 (Ciba‐Geigy) and acrylic acid, and used as a toughening agent for unsaturated polyester resin. Unsaturated polyesters modified with 10, 20, and 30 wt % vinyl ester oligomer were made. The VEO toughened unsaturated polyester matrix systems, further modified with 5, 10, and 15 wt % bismaleimide (BMI). BMI–VEO–UP matrices were characterized using differential scanning calorimetry, thermogravimetric analysis, and heat deflection temperature analysis. The matrices, in the form of castings, were characterized for their mechanical properties according to ASTM methods: tensile strength, flexural strength, and unnotched Izod impact test. Data obtained from mechanical studies and thermal characterization indicate that the introduction of VEO and BMI into unsaturated polyester resin improves thermomechanical properties according to their percentage concentration. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2502–2508, 2002     

Phase separation of unsaturated polyester resin blended with poly(vinyl acetate)

The behavior of phase separation during the curing reaction of unsaturated polyester (UPE) resin in the presence of low profile additive, that is, poly(vinyl acetate) (PVAc), was studied by low-angle laser light scattering (LALS) and scanning electron microscopy (SEM). The experimental results revealed that the PVAc-rich phase was regularly dispersed in the cured styrene–UPE matrix for styrene–UPE resin blended with 5 wt % of PVAc. As the PVAc content was increased higher than 10 wt %, a cocontinuous PVAc and cured styrene–UPE phase was observed for the cured systems. The LALS observations were carried out in situ at a curing temperature of 100°C; thus, the effect of the rate of exothermic heat released from curing reaction on the morphology of curing system was investigated and reported in this work. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2413–2428, 1999     

Investigation of acrylamide‐modified melamine‐formaldehyde resins as a compatibilizer for kenaf‐unsaturated polyester composites

Kenaf fiber‐reinforced unsaturated polyester (UPE) composites were prepared by compression molding. A novel compatibilizer was prepared from melamine, formaldehyde, and acrylamide. The treatment of kenaf fibers with the compatibilizer significantly increased the flexural properties and reduced the water uptake of the resulting kenaf–UPE composites. The effects of the total solids content, the molar ratios of melamine/formaldehyde/acrylamide, and the pH value of the compatibilizer solution in the treatment of kenaf fibers on the flexural strength, flexural modulus, as well as the water uptake of the kenaf–UPE composites were studied in detail. Fourier transform infrared spectra revealed that the compatibilizer was covalently bonded to kenaf fibers. Scanning electron microscopy images of the fractured kenaf–UPE composites confirmed that the treatment of kenaf fibers with the compatibilizer improved the interfacial adhesion between kenaf fibers and UPE resin. The mechanisms for the improved flexural properties and the reduced water uptake by the treatments of the kenaf fibers were proposed and discussed. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

有机累托石改性不饱和聚酯／玻璃纤维复合材料的研究

采用有机累托石改性不饱和聚酯，以改性的不饱和聚酯为基体，以两种玻璃布(EW210、CWR400-90)为增强材料，以两个不同凝胶时间的不饱和聚酯树脂体系制备三种有机累托石改性的不饱和聚酯磁璃纤维复合材料(UPB1、UPB2、UPB3)。测试了不饱和聚酯/玻璃纤维的力学性能；研究了复合材料的耐湿热性及耐介质性能；利用扫描电镜及透射电镜分析了复合材料的增强机理。结果表明，采用有机累托石改性不饱和聚酯所制备的不饱和聚酯／玻璃纤维复合材料的综合力学性能优于纯不饱和聚酯／玻璃纤维复合材料。     

Effects of fiber extraction,morphology, and surface modification on the mechanical properties and water absorption of bamboo fibers‐unsaturated polyester composites

Bamboo fibers reinforced unsaturated polyester (UPE) composites were prepared by compression molding. Effects of fiber extraction, morphology, and chemical modification on the mechanical properties and water absorption of the bamboo fibers‐UPE composites were investigated. Results showed that the unidirectional original bamboo fibers resulting composites demonstrated the highest tensile strength, flexural strength, and flexural modulus; the 30–40 mesh bamboo particles resulting composites had the lowest tensile strength and flexural strength, but had comparable flexural modulus with that of chemical pulp fibers. The treatment of bamboo fibers with 1,6‐diisocyanatohexane (DIH) and 2‐hydroxyethyl acrylate (HEA) significantly increased the tensile strength, flexural strength and flexural modulus, and water resistance of the resulting composites. Fourier Transform Infrared and X‐ray photoelectron spectroscopy analyses showed that DIH and HEA were covalently bonded onto bamboo fibers. Scanning electron microscopic images of the fractured surfaces of the composites showed that the treatment of bamboo fibers greatly improved the interfacial adhesion between the fibers and UPE resins. The water absorption kinetics of the composites was also investigated; and the results showed that the water absorption of the composites fitted Fickian behavior well. POLYM. COMPOS., 37:1612–1619, 2016. © 2014 Society of Plastics Engineers