Nanofiltration membranes based on poly(vinyl alcohol) and ionic polymers

Nanofiltration membranes based on poly(vinyl alcohol) (PVA) and ionic polymers, such as sodium alginate (SA) and chitosan, were prepared by casting the respective polymer solutions. The membranes prepared from PVA or PVA–ionic polymer blend were crosslinked in a isopropanol solution using glutaraldehyde as a crosslinking agent. The membranes were characterized with Fourier transform infrared spectroscopy and X‐ray diffractometry and swelling test. The membranes crosslinked through the acetal linkage formation between the  OH groups of PVA and the ionomer and glutaraldehyde appeared to be semicrystalline. To study the permeation properties, the membranes were tested with various feed solutions [sodium sulfate, sodium chloride, poly(ethylene glycol) with 600 g/mol of molecular weight (PEG 600), and isopropyl alcohol]. For example, the permeance and the solute rejection of the 1000 ppm sodium sulfate at 600 psi of upstream pressure through the PVA membrane were 0.55 m³/m² day and over 99%, respectively. The effects of the ionomers on the permeation properties of the PVA membranes were studied using the PVA–SA and PVA–chitosan blend membranes. The addition of small amount of ionic polymers (5 wt %) made the PVA membranes more effective for the organic solute rejection without decrease in their fluxes. The rejection ratios of the PEG 600 and isopropanol were increased substantially. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1755–1762, 1999     

Interfacial properties of polyacrylamide solutions

Surface tension of the polyacrylamide solution was measured as a function of the polyacrylamide concentration (0–1000 gm/m³) and temperature (10–60°C). The static contact angles of the polyacrylamide solutions in the range of 0–1000 gm/m³ were reported on the polyvinyl chloride and Teflon substrates. Surface tension, static contact angle, and spreading behavior of the polyacrylamide solutions in the presence of different concentrations of NaCl, CaCl₂, and AlCl₃ are discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 219–227, 1999     

Transesterification and crosslinking of poly(vinyl chloride‐co‐vinyl acetate) copolymers in the melt

A new method to obtain hydroxylated poly(vinyl chloride) (PVC‐OH) and its crosslinking in the melt are studied. Starting from a vinyl chloride‐co‐vinyl acetate copolymer, a transesterification reaction in the presence of an alcohol during the processing of plasticized polymer is investigated as a function of the processing temperature and alcohol nature (1‐butanol or 1‐octanol). Reaction evolution is followed by ¹H‐NMR and IR spectroscopies. The best results are obtained for 1‐octanol, and they show the absence of secondary reactions and the progressive appearance of OH groups in the polymer as acetate groups disappear. On the other hand, crosslinking of the thus‐obtained PVC‐OH with hexamethylene diisocyanate (HMDI) during the processing is also studied. The gel content and the mechanical properties at 140°C are studied as a function of three crosslinking variables: number of OH groups present in the polymer, concentration of HMDI added to the polymer, and time of crosslinking. The results show that by optimizing those parameters it is possible to obtain gel contents up to 100% and an increase of 600% in the Young's modulus and 1300% in the ultimate tensile strength with respect to the plasticized PVC. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 621–630, 1999     

Thermal behavior and morphological properties of novel magnesium salt–polyacrylamide composite polymers

Magnesium salt–polyacrylamide composite polymers have been prepared by blending magnesium chloride and magnesium hydroxide, respectively, with polyacrylamide aqueous solution. The thermal behavior of the dried magnesium salt–polyacrylamide composite polymers has been studied. Differential scanning calorimetric (DSC) analysis and thermal gravimetric analysis (TGA) were carried out to investigate the changes of the composite polymers' behavior with temperature. The kinetics of the thermal decomposition of magnesium salt–polyacrylamide composite polymers was investigated over temperature range of 35–800°C with three heating rates of 10, 20, and 40°C/min under nitrogen atmosphere. Flynn and Wall's model was usedto determine the activation energies of thermal decomposition for magnesium salt–polyacrylamide composite polymers. The activation energies needed to decompose 50 wt% of magnesium hydroxide‐polyacrylamide (MHPAM) composite polymer ranged from of 28.993–174.307 kJ/mol which are higher than the values for magnesium chloride–polyacrylamide (MCPAM) composite polymer (21.069–39.412 kJ/mol). Therefore, MHPAM composite polymer has a better thermal stability compared with MCPAM composite polymer. The morphological properties of magnesium salt–polyacrylamide composite polymers were studied using scanning electron microscopy (SEM). Energy‐dispersive X‐ray (EDX) spectroscopy was used to determine the composition of the chemical elements. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Impact of salts on polyacrylamide hydrolysis and gelation: New insights

Polyacrylamide (PAM) and its derivatives are the most commonly used polymers in the preparation of polymeric gels for water control in petroleum reservoirs. This study involved the use of polyethylenimine (PEI) as a crosslinker for PAM. In this study, we investigated PAM alkaline hydrolysis at high temperatures. The effects of salts [sodium chloride (NaCl) and ammonium chloride (NH₄Cl)] on the degree of hydrolysis (DH) of PAM were investigated. These salts were used as retarders to elongate the gelation time of the PAM/PEI system. The data obtained from ¹³C‐NMR was used to understand the retardation mechanisms by salts. We found that NH₄Cl accelerated the extent of hydrolysis more in comparison with NaCl. Moreover, the apparent viscosity of the hydrolyzed samples was measured. PAM hydrolysis in the presence of NH₄Cl resulted in a lower solution viscosity than that in the presence of NaCl. Therefore, NH₄Cl was more effective in shielding negative charges on the carboxylate groups of the partially hydrolyzed polyacrylamide (PHPA) chain. NaCl and NH₄Cl were compatible with the PHPA/PEI system, but sodium carbonate showed a white precipitate. In addition, high‐temperature/high‐pressure elastic modulus data were reported for the first time for this system. Differential scanning calorimetry was coupled with rheology to explain the PAM/PEI crosslinking in the presence of salts. Models were developed to assess the impact of the salts on the PAM DH and the induction period before gelation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41185.     

Microwave plasma reactions of imidazole on poly(vinyl chloride) surfaces: A spectroscopic study

Although there are various forms of energy available for conducting surface and interfacial reactions, microwave plasma energy is an attractive means for surface modifications because it is fast and it usually does not alter bulk properties. In this study, a closed‐system microwave plasma reactor was used to react imidazole molecules to poly(vinyl chloride) (PVC) surfaces. Newly created surfaces were analyzed using attenuated total reflectance (ATR) Fourier‐transformed infrared (FTIR) spectroscopy. These studies show that surface reactions on PVC are heavily dependent upon a prior thermal history of the PVC substrate. It appears that the plasma reactions on hot‐pressed PVC not only result in the development of CH₂ linkages, but a significant increase of crystallinity in the hot‐pressed PVC inhibits the reactivity of imidazole to the PVC surface. On the other hand, for a solvent‐cast PVC with a significantly lower surface crystalline phase content, imidazole reacts to the PVC surface through CC bond opening. The amount of imidazole reacted to the PVC surface changes with the depth from the surface. Using quantitative ATR FTIR spectroscopy, imidazole content can be quantified, and its concentrations are in the 10⁻⁶ mol/cm² range at about 0.8–1.2 μm for the PVC surface. A mechanism of the PVC–imidazole reactions is also proposed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1–6, 1999     

Synthesis,characterization, and flocculation properties of poly(acrylamide‐methacryloxyethyltrimethyl ammonium chloride‐methacryloxypropyltrimethoxy silane)

A novel hydrophobically modified and cationic flocculant poly(acrylamide‐methacryloxyethyltrimethyl ammonium chloride‐methacryloxypropyltrimethoxy silane) (P(AM‐DMC‐MAPMS)) was synthesized by inverse emulsion polymerization. The molecular structure of hydrophobically cationic polyacrylamide (HCPAM) was characterized by FTIR and ¹H‐NMR. The effects of DMC and MAPMS feed ratio on intrinsic viscosity and solubility were measured. The effects of hydrophobically cationic flocculants on reactive brilliant red X‐3B solution and kaolin suspension were studied. It was found that the introduction of MAPMS could increase the intrinsic viscosities of P(AM‐DMC‐MAPMS) and enhance the flocculation properties to anionic dye solution and kaolin suspension, but reduced their water‐solubility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Studies on viscosity build‐up properties of sodium alcohol ether sulphates

Narrow and broad range distributed ethoxylates of linear C₁₂–C₁₄ alcohols were synthesised using a calcium‐based unconventional catalyst and NaOH, respectively. Their composition was determined by gas chromatography. Sulphates were synthesised in the traditional way by reaction of ethoxylates with sulphur trioxide in a film reactor and neutralised with sodium hydroxide. Products were characterized by the ethoxylate homologue distributions and acid value of the intermediate sulphuric acid derivatives. Viscosity build‐up properties of the narrow and broad range distributed ethoxylates‐based sodium alcohol ether sulphates were studied. Effects of ethoxylate homologue distribution were compared with those of average ethoxylation grade and sulphation degree. It was shown that the acid number of the obtained sulphates, ethoxylate homologue distribution, average polyaddition degree and sodium chloride content influenced remarkably the thickening ability of ethoxylates. Furthermore, it was found that the limited content of the longer ethoxylate chains in narrow range distributed alcohol ethoxylates is responsible for enhanced viscosity build‐up properties of their sodium sulphate derivatives. The following empirical relationship was obtained: log η = (2.99 ± 1.25) + (3.78 ± 0.86) × 10⁻²V − (1.48± 0.15)N_av − (2.69 ± 0.7) × 10⁻²A_N + (0303 ± 0.058) × C_surf + (0.832 ± 0.041) × C_NaCl where η is the viscosity in cP, V is the distribution coefficient, N_av is the average oxyethylation degree, A_N is the acid number of alcohol ether sulphuric acid and C_surf and C_NaCl are concentrations (wt%) of the studied surfactants and sodium chloride, respectively. © 1999 Society of Chemical Industry     

Improvement of physical properties of crosslinked alginate and carboxymethyl konjac glucomannan blend films

Blend films from carboxymethyl konjac glucomannan and sodium alginate in different ratios were prepared by blending 4 wt % sodium alginate aqueous solution with 2 wt % konjac glucomannan aqueous solution. After crosslinking with 5 wt % calcium chloride aqueous solution, the blend films formed a structure of semi‐interpenetrating networks. The structure and physical properties of both uncrosslinked and crosslinked films were characterized by Fourier transformed infrared spectra (FTIR), differential thermal analysis (DTA), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and tensile tests. The results indicated that the mechanical properties and the thermal stability of the films were improved by blending sodium alginate with carboxymethyl konjac glucomannan due to the intermolecular hydrogen bonds between sodium alginate and carboxymethyl konjac glucomannan. The crosslinked blend films with Ca²⁺, compared with uncrosslinked blend films, exhibited further improved physical properties due to the formation of a semi‐IPN structure. Furthermore, the degree of swelling of the crosslinked films was also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2554–2560, 2002     

Preparation,characterization, and flocculation performance of P(acrylamide‐co‐diallyldimethylammonium chloride) by UV‐initiated template polymerization

This study prepared TPDA, a high‐intrinsic‐viscosity cationic polyacrylamide, through ultraviolet (UV)‐initiated template polymerization. Acrylamide (AM) and diallyldimethylammonium chloride (DMD) served as monomers, and poly sodium polyacrylate (PAAS) served as the template. The structure of TPDA was characterized by Fourier‐transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. The synthetic conditions of TPDA were studied and optimized by single‐factor experiments. An optimized product was obtained at an intrinsic viscosity of 11.3 dL g^?1 and a conversion rate of 97.2% with a total monomer concentration of 20%, DMD concentration of 30%, initiator concentration of 0.045%, pH of 8, EDTA concentration of 0.3%, and UV irradiation of 90 min. Results showed that TPDA was the copolymer of AM and DMD with a micro‐block structure at the molecular chain. Given its high intrinsic viscosity and cationic block structure, TPDA performed better in kaolin flocculation than that prepared without template addition. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41747.     

Production of bioethanol by immobilized Saccharomyces Cerevisiae onto modified sodium alginate gel

BACKGROUND: Microbial bioethanol production is an important option in view of the finite global oil reserves. Bioethanol fermentation was carried out using immobilized microorganisms (Saccharomyces cerevisiae, Zymomonas mobilis, Pichia stipitis, etc.), which has many advantages compared with the use of free cells. Various support materials have been used for bioethanol fermentation, and alginate gels have been one of the most widely used matrices for cell entrapment. The aim of this study was increased bioethanol production by Saccharomyces cerevisiae immobilized on alginate gels. First, N‐vinyl‐2‐pyrrolidone was grafted onto sodium alginate. Then, the properties of ethanol production were investigated using the matrix obtained. RESULTS: The performance of ethanol fermentation was affected by calcium chloride concentration, N‐vinyl‐2‐pyrrolidone grafted onto the sodium alginate, sugar concentration and the percentage of immobilized cell beads. These effects were optimized to give maximum ethanol production. Ethanol production was accelerated when sodium alginate polymer was modified with N‐vinyl‐2‐pyrrolidone. The maximum concentration, productivity and yield of ethanol were 69.68 g L^?1, 8.71 g L^?1 h^?1 and 0.697 g g^?1, respectively. CONCLUSION: The new polymeric matrix, when compared with sodium alginate, showed better ethanol production due to the hydrophilic property of N‐vinyl‐2‐pyrrolidone. The results suggest that the proposed method for immobilization of Saccharomyces cerevisiae has potential in industrial applications of the ethanol production process. Copyright © 2011 Society of Chemical Industry     

Gamma‐radiation‐induced graft copolymerization of acrylamide onto crosslinked poly(N‐vinylpyrrolidone)

Crosslinked poly(N‐vinylpyrrolidone) (PVPy) beads were irradiated with γ‐rays in air from a ⁶⁰Co source. Preirradiated beads were grafted with polyacrylamide by refluxing with acrylamide in water or dioxane. Conditions for optimum grafting were determined under a variety of reaction parameters, such as the total dose, duration, and temperature of heating, and the molar concentration of acrylamide used. The effect of the addition of methanol to the aqueous medium during grafting was also studied. The pendant carboxamide groups of PVPy‐g‐polyacrylamide were transformed into amino, aminoethylamido, and hydrazide functionalities terminating in primary amino or hydrazido groups. These provide sites for immobilizing proteins through their amino or carboxyl groups and, also, handles for attaching reagent molecules. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2163–2168, 1999     

High‐temperature resistance water‐soluble copolymer derived from acrylamide,DMDAAC, and functionalized sulfonamide for potential application in enhance oil recovery

A water‐soluble poly(AM‐AA‐DMDAAC‐TCAP) was prepared using acrylamide (AM), acrylic acid (AA), diallyl dimethyl ammonium chloride (DMDAAC), and N‐allyl‐4‐methylbenzenesulfonamide (TCAP), and the synthesis conditions were investigated. The obtained copolymer was characterized by FTIR, ¹H‐NMR, SEM, TG, and XRD. The temperature resistance and thickening function of the copolymer are improved significantly compared with that of partially hydrolyzed polyacrylamide. It is found that the viscosity of copolymer could achieve up to 53.3% retention rate at 120°C compared to that at 30°C. About 16.6% for enhanced oil recovery is obtained by poly(AM‐AA‐DMDAAC‐TCAP) brine solution at 65°C. In addition, the results of XRD show that 3000 mg/L copolymer combined with 10 wt % KCl solution could reduce the d‐spacing of sodium montmorillonite from 18.94 to 14.86 Å exhibiting remarkable effect on inhibiting hydration of clays. All the results demonstrate that poly(AM‐AA‐DMDAAC‐TCAP) have excellent performance for potential application in enhance oil recovery. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40727.     

Hg(II) removal with polyacrylamide grafted crosslinked poly(vinyl chloride) beads via surface‐initiated controlled/“living” radical polymerization

Polyacrylamide grafted crosslinked poly (vinyl chloride) beads (PAM‐PVC) were prepared by the surface‐initiated controlled/“living” radical polymerization (SI‐CLRP) methodology from the crosslinked poly(vinyl chloride) beads with surface modification with diethyldithiocarbamyl groups under UV irradiation. The macroiniferter, diethyldithiocarbamyl crosslinked poly(vinyl chloride) beads (DEDTC‐PVC) were prepared by the reaction of the surface C? Cl groups with sodium N,N‐diethyl dithiocarbamate. The “grafting from” polymerization exhibited some “living” polymerization characteristics and the percentage of grafting (PG%) increased linearly with polymerizing time and achieved 47.6% after 6 h UV irradiation. The beaded polymer with polyacrylamide surface was also characterized with Fourier transform infrared (FTIR) and scanning electron microscope (SEM). Its adsorption property for Hg(II) ion was also investigated preliminarily. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3385–3390, 2006     

Synthesis of a novel amphoteric chelating polymer flocculant and its performance in Cu2+ removal

A novel amphoteric chelating polymer flocculant (ACPF) was synthesized. The synthesis involved the copolymerization of dimethyldiallylammonium chloride and acrylamide to prepare poly(dimethyldiallylammonium chloride‐co‐acrylamide) [P(DMDAAC‐co‐AM)], Mannich reaction of P(DMDAAC‐co‐AM) with triethylenetetramine and formaldehyde to prepare P(DMDAAC‐co‐AM)‐graft‐TETA, and xanthogenation of P(DMDAAC‐co‐AM)‐graft‐TETA with CS₂ and NaOH. The removal performance of ACPF toward Cu²⁺ was investigated, and the ACPF structure was characterized. ACPF performance considerably improved at 121–187 mL/g intrinsic viscosity, 20.78–28.32 mol % cationic degree of P(DMDAAC‐co‐AM), and 22.11–28.44% sulphur content of ACPF. The Cu²⁺ removal rate was above 99% at a 1.98 : 1 molar ratio of ‐CSS^? to Cu²⁺. This rate was 5.86% higher than that using polyacrylamide‐graft‐triethylenetetramine‐dithiocarbamate (PAM‐graft‐TETA‐DTC). The zeta potential and sedimentation rate of flocs obtained from ACPF were higher and their volume was smaller than those from sodium triethylenetetramine‐multidithiocarbamate and PAM‐graft‐TETA‐DTC at the same sulphur dosage. This result indicates that the positive charges of ACPF polymeric chains effectively neutralize excess negative charges in flocs, which benefits the bridging of flocs with negative charges to promote their formation and growth. These positive charges can also cause the flocs to become larger and tighter, thereby improving flocculation and settling performance. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Novel PDMS‐based membranes: Sodium chloride and glucose permeability

Permeation of sodium chloride and glucose through polydimethylsiloxane‐poly(N‐isopropylacrylamide) (PDMS‐PNIPAAm) interpenetrating polymer networks (IPNs) of two different microstructures was investigated. We have successfully developed small‐molecule permeable IPNs, by modifying PDMS film structure. A group of PDMS films was prepared using conventional solvent casting (SC) method and another group produced by introducing oil, followed by SC and leaching the oil out (SCOL method). Scanning electron microscopy (SEM) and attenuated total reflection fourier transformer infrared (ATR‐FTIR) spectroscopy results confirmed the presence of PNIPAAm in the SC and SCOL IPNs. Results obtained from spectra of differential scanning calorimetry (DSC) showed that these IPNs had a phase transition temperature at about 32°C. Permeation measurements showed that the presence of PNIPAAm as the second phase in the IPN, improved the permeability of PDMS film. According to the results, maximum permeation coefficient was related to SCOL IPN containing 15.8% ± 0.3%PNIPAAm, at 23°C (5.98 × 10^?7 ± 7.93 × 10^?9 cm²/s for sodium chloride and 3.6 × 10^?7 ± 7 × 10^?9 cm²/s for glucose). These results suggested that these PDMS‐PNIPAAm IPNs with sodium chloride and glucose permeability may be further developed as ophthalmic biomaterials or corneal replacements. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Development of a nonaqueous solvent system for poly(vinyl alcohol) and its characterization

Solubility of poly(vinyl alcohol) (PVA) in water prevents the preparation of various derivatives through homogeneous techniques as most of the derivatives thus formed are insoluble in aqueous medium. There are a number of solvents that can swell PVA under hot conditions but cannot dissolve PVA. In the present study, N,N‐dimethyl acetamide (DMAc) has been identified as solvent in which PVA can be dissolved in the presence of an equimolar amount of lithium chloride (LiCl). ¹H nuclear magnetic resonance (¹H‐NMR), ¹³C‐NMR, infrared (IR), and X‐ray diffraction (XRD) studies have been carried out to characterize the regenerated poly(vinyl alcohol) (RPVA). DMAc–LiCl is found to be a true solvent system for dissolution of PVA. An attempt has also been made to prepare poly(vinyl acetate) from this solution of PVA by a homogeneous technique. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 663–669, 1999     

New poly(amide‐imide) syntheses. 24. Synthesis and properties of fluorinated poly(amide‐imide)s based on 2,2‐bis[4‐(trimellitimidophenoxy)phenyl]hexafluoropropane and various aromatic diamines

An imide ring‐performed dicarboxylic acid bearing one hexafluoroisopropylidene and two ether linkages between aromatic rings, 2,2‐bis[4‐(4‐trimellitimidophenoxy)phenyl]hexafluoropropane (II), was prepared from the condensation of 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane and trimellitic anhydride. A novel series of poly(amide‐imide)s having inherent viscosities of 0.72 ∼ 1.86 dL g⁻¹ was prepared by the triphenyl phosphite‐activated polycondensation from the diimide‐diacid (II) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrolidone, pyridine, and calcium chloride. Several of the resulting polymers were soluble in polar amide solvents, and their solutions could be cast into transparent, thin, flexible films having good tensile properties and high thermal stability. The 10% weight loss temperatures were all above 495°C in air or nitrogen atmosphere, and the glass transition temperatures were in the range of 237°–276°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 823–831, 1999     

凹凸棒土/丁苯胶乳纳米复合材料的制备与表征

以凹凸棒土(AT)和丁苯胶乳(SBR)为原料,通过与阴离子型聚丙烯酰胺、非离子型聚丙烯酰胺(NPAM)、氯化钠、乙醇等絮凝,制备了性能优异的凹凸棒土/丁苯胶乳复合材料。研究了各种添加剂对凹凸棒土和丁苯胶乳混合液絮凝效果的影响,同时考察了添加剂类型、用量对凹凸棒土/丁苯胶乳复合材料的力学性能的影响,确定了混合液最佳絮凝条件。结果表明:非离子型聚丙烯酰胺对混合液絮凝效果最好,同时凹凸棒土经硅烷偶联剂KH590改性后有利于提高凹凸棒土在丁苯胶乳基体中的分散性及复合材料中的结合橡胶量,从而提高凹凸棒土/丁苯胶乳复合材料的力学性能。     

Influence of grafting on structural and optical properties of nylon‐6 fibers

This study throws light on the change of the optical properties and some structural properties due to graft copolymerization of polydiallyldimethyl ammonium chloride (PDADMAC) and polyacrylamide (PAA) of nylon‐6 fibers. Multiple‐beam interferometric technique in transmission was used to study the change of the diameter, refractive indices, and birefringence of nylon‐6 fibers at different graft yields. The results were utilized to investigate the isotropic refractive index, the mean polarizabilities per unit volume, dielectric constant, dielectric susceptibility, and surface reflectivity for nylon‐6 and grafted nylon‐6 fiber. The effect of grafted PAA onto modified nylon‐6 fibers containing PDADMAC on the crystallinity was studied by X‐ray diffraction. These results reflect good effect of grafting on the optical and structural properties of nylon‐6 fibers. The opto‐thermal properties of grafted PAA with different graft yields have been studied. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010