Enzymatic enantioselective hydrolysis of acyloxyferrocenophanes using lipases and esterases

Enantioselective hydrolysis of racemic acetate or butyrates of 1-hydroxy [3](1,1′) ferrocenophane and endo-1-hydroxy [4](1,2) ferrocenophane using lipases, pig liver esterase and horse liver esterase resulted in the formation of (R)-alcohols and (S)-esters.     

Enzymatic kinetic resolution of [3](1,1′)ferrocenophane derivatives

Formyl- and hydroxymethyl- derivatives of [3](1,1′)ferrocenophane were enzymatically resolved with fermenting baker's yeast, immobilized lipase, and pig liver esterase.     

Enzymatic resolution of racemic secondary alcohols by lipase B from Candida antarctica

Chiral intermediates S-(+)-2-pentanol and S-(+)-2-heptanol were prepared by a lipase-catalyzed enzymatic resolution proces. Among various lipases evaluated for the stereoselective acylation of racemic alcohols, lipase B from Candida antarctica catalyzed the acylation of the undesired enantiomer of racemic alcohols leaving the desired S-(+)-alcohols unreacted. A reaction yield of 43–45% and an enantiomeric excess (e.e.) of >99% were obtained for S-(+)-2-pentanol or S-(+)-2-heptanol when the reaction was carried out using vinyl acetate or succnic anhydride as acylating agent. In an alternative process, an enantioselective hydrolysis of 2-pentyl acetate was demonstrated using lipase B giving S-(+)-2-pentyl acetate and R-(−)-2-pentanol. A reaction yield of 45% and an e.e. of 98.6% were obtained for S-(+)-2-pentyl acetate. This work was presented at the Biocatalysis Symposium in April 2000, held at the 91st Annual Meeting and Expo of the American Oil Chemists' Society, San Diego, CA.     

Application of lipase immobilized on nylon‐6 for the synthesis of butyl acetate by transesterification reaction in n‐heptane

A purified alkaline thermotolerant bacterial lipase from Bacillus coagulans BTS‐3 was immobilized on nylon‐6 matrix activated by glutaraldehyde. The matrix showed ～ 70% binding efficiency for lipase. The bound lipase was used to perform transesterification in n‐heptane. The reaction studied was conversion of vinyl acetate and butanol to butyl acetate and vinyl alcohol. Synthesis of butyl acetate was used as a parameter to study the transesterification reaction. The immobilized enzyme achieved ～ 75% conversion of vinyl acetate and butanol (100 mmol/L each) into butyl acetate in n‐heptane at 55°C in 12 h. When alkane of C‐chain lower or higher than n‐heptane was used as an organic solvent, the conversion of vinyl acetate and butanol to butyl acetate decreased. During the repetitive transesterification under optimal conditions, the nylon bound lipase produced 77.6 mmol/L of butyl acetate after third cycle of reuse. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Study of TAG ethanolysis to 2-MAG by immobilized Candida antarctica lipase and synthesis of symmetrically structured TAG

Regiospecific ethanolysis of homogenous TAG with immobilized Candida antarctica lipase (Novozym 435) was studied using trioleoylglycerol (TO) as a model substrate. Optimization of the reactant weight ratio revealed that the 2-MAG reaction yield increased when a larger amount of ethanol was used. These results suggested that Novozym 435 showed strict regiospecificity in an excess amount of ethanol. The process optimization (reaction temperature and reactant molar ratio) and a study of lipase specificity for various substrates were performed. Under the optimized conditions (ethanol/TO molar ratio=77∶1 and 25°C), 2-monooleoylglycerol (2-MO) was obtained in more than 98% content among glycerides of the reaction mixture and approximately 88% reaction yield in 4 h. The above reaction conditions were applied for ethanolysis of tridocosahexaenoylglycerol, trieicosapentaenoylglycerol, triarachidonoylglycerol, tri-α-linolenoylglycerol, and trilinoleoylglycerol. Reaction yields ranging from 71.9 to 93.7% were obtained in short reaction times (2.5 to 8 h). Purified (>98%) 2-MO and 2-monodocosahexaenoylglycerol (2-MD) were reesterified with caprylic acid by immobilized Rhizomucor miehei lipase (Lipozyme IM) to afford symmetrical structured TAG. At a stoichiometric ratio of 2-MAG/caprylic acid, 25°C and 2–5 mm Hg vacuum, the glyceride composition of the esterification mixture was approximately 95% 1,3-dicapryloyl-2-oleoylglycerol (COC) at 4 h, and 96% 1,3-dicapryloyl-2-docosahexaenoylglycerol (CDC) at 4 h, and 96% 1,3-dicapryloyl-2-docosahexaenoylglycerol (CDC) at 8 h. The regioisomeric purity of both COC and CDC was 100%.     

Stereoselective acylation of Dl-menthol in organic solvents by an immobilized lipase from Pseudomonas cepacia with vinyl propionate

An effective lipase-catalyzed stereoselective transesterification of (±)-menthol in organic solvent with vinyl propionate as acylating agent is described. Immobilization by adsorption and the presence of molecular sieves improved the formation of (±)-menthyl propionate by lipase (PS-30) from Pseudomonas cepacia. The reaction time course, mole ratio of substrates, temperature, amount of enzyme, as well as the effect of various organic solvents, were examined for their influence on the enzymatic stereoselective formation of (−)-menthyl propionate. Among the parameters studied, the stereospecificity toward (−)-menthol decreased significantly as temperature increased but the yields of both enantiomers increased. Organic solvents with log P (partition coefficient) values above 3.5 gave higher yield and stereoselectivity than solvents with lower log P values.     

Enzymatic Synthesis and Antioxidant Activity of 1‐Caffeoylglycerol Prepared from Alkyl Caffeates and Glycerol

Caffeic acid (CA) as a strong antioxidant has lower solubility in nonpolar media, which limits its application in the food industry. To increase the lipophilicity of CA, 1‐caffeoylglycerol (1‐CG) was synthesized by lipase‐catalyzed transesterification of alkyl caffeates in solvent‐free system and its antioxidant capacity was investigated. Methyl caffeate was screened as the appropriate substrate from tested alkyl caffeates with a yield of 90.63%. Ethyl acetate was used for extracting 1‐CG from enzymatic reactants and could be easily recycled. The produced 1‐CG had 2.5‐ and 10‐fold lower values of half maximal inhibitory concentration (IC₅₀) (10.86 and 3.99 μM) than butylated hydroxyanisole by 1,1‐diphenyl‐2‐picrylhydrazyl radical scavenging and β‐carotene‐linoleic acid assays, respectively. Thus, 1‐CG is an excellent antioxidant for application in the functional food industry. Using alkyl caffeates and glycerol as substrates to produce 1‐CG catalyzed by immobilized lipase in a solvent‐free system is a simple, selective, and safe bioprocess that can readily be achieved in the food industry, and the product 1‐CG could be widely applied in food, nutraceutical, and biotechnological products.     

Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Extraction of Candida rugosa lipase from aqueous solutions into organic solvents by forming an ion‐paired complex with AOT

Candida rugosa lipase was extracted from aqueous solutions into organic solvents by forming an ion‐paired complex with sodium bis(2‐ethylhexyl)sulfosuccinate (AOT). The optimal aqueous pH for lipase recovery was 4.5 and the optimal CaCl₂ concentration was 10 mmol dm^?3. The lipase recovery decreased with increasing aqueous enzyme concentration but increased with increasing AOT concentration in the organic phase. The presence of polar co‐solvents in the aqueous phase did not obviously improve the lipase recovery, which was also little influenced by the type of hydrophobic organic solvent used for solubilising AOT. Surprisingly, no detectable activity of the ion‐paired C. rugosa lipase was observed for both the esterification of lauric acid with 1‐propanol in isooctane and the hydrolysis of olive oil in isooctane containing an appropriate amount of water. The ion‐paired C. rugosa lipase mediated the enantioselective crystallisation of racemic ketoprofen in isooctane, indicating the feasibility of using it as a chiral mediator for the enantioseparation of hydrophobic racemic compounds in organic systems. Copyright © 2006 Society of Chemical Industry     

Enantiopure N‐Benzyloxycarbonyl‐β2‐amino Acid Allyl Esters from Racemic β‐Lactams by Dynamic Kinetic Resolution using Candida antarctica Lipase B

The dynamic kinetic resolution of α‐substituted racemic β‐lactams by alcoholytic ring‐opening, catalyzed by immobilized lipase B from Candida antarctica is described. With this process, a variety of racemic α‐substituted N‐Cbz‐azetidinones (Cbz=benzyloxycarbonyl) was transformed to the corresponding N‐Cbz‐protected β²‐amino acid allyl esters with high enantioselectivity (up to 99%) and high yields (up to quantitative) at room temperature.

     

Preparation of polyimides derived from biphenyltetracarboxylic dianhydrides and aromatic diamines bearing alkylene spacers

Four series of aromatic polyimides (PIs V–VIII) composed of biphenyltetracarboxylic dianhydrides (BPDAs) and aromatic diamines bearing alkylene spacers were prepared by two methods. Most polymers could be readily prepared in a one‐step method for the combination of a‐BPDA with α,ω‐bis(3‐aminophenoxy)alkanes, a‐BPDA with α,ω‐bis(4‐aminophenoxy)alkanes, and s‐BPDA with α,ω‐bis(3‐aminophenoxy)alkanes. However, the polymerization of s‐BPDA with α,ω‐bis(4‐aminophenoxy)alkanes gave powders. On the other hand, all four monomer combinations afforded the desired polyamic acid solution in a two‐step method. These polymer solutions could be cast into tough and flexible films, which were characterized by their inherent viscosity, differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical spectrometry measurements. The glass transition temperatures (T_gs) of the polymers were in the range of 110–240°C, but they were not clearly defined for PIs VIII and VI. The 5% weight loss temperatures were around 450°C for all prepared PIs. For PI VIII an “odd–even” behavior of the tensile properties of the films was detected, corresponding to the reported behavior of the melting temperatures. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2404–2413, 1999     

Molecular Basis for the Enantioselective Ring Opening of β‐Lactams Catalyzed by Candida antarctica Lipase B

Lipase B from Candida antarctica (CAL‐B) catalyzes the slow, but highly enantioselective (E>200), ring‐opening alcoholysis of two bicyclic and two 4‐aryl‐substituted β‐lactams. Surprisingly, the rate of the reaction varies with the nature of the alcohols and was fastest with either enantiomer of 2‐octanol. A 0.5‐g scale reaction with 2‐octanol as the nucleophile in diisopropyl ether at 60 °C yielded the unreacted β‐lactam in 39–46% yield (maximum yield is 50%) with ≥96% ee. The product β‐amino acid esters reacted further by polymerization (not isolated or characterized) or by hydrolysis due to small amounts of water in the reaction mixture yielding β‐amino acids (7–11% yield, ≥96% ee). The favored enantiomer of all four β‐lactams had similar 3‐D orientation of substituents, as did most previously reported β‐lactams and β‐lactones in similar ring‐opening reactions. Computer modeling of the ring opening of 4‐phenylazetidin‐2‐one suggests that the reaction proceeds via an unusual substrate‐assisted transition state, where the substrate alcohol bridges between the catalytic histidine and the nitrogen of the β‐lactam. Computer modeling also suggested that the molecular basis for the high enantioselectivity is a severe steric clash between Ile189 in CAL‐B and the phenyl substituent on the slow‐reacting enantiomer of the β‐lactam.     

Highly Enantioselective Allylation of Aromatic α‐Keto Phosphonates Catalyzed by Chiral N,N′‐Dioxide‐Indium(III) Complexes

The ramipril derivative N,N′‐dioxide 3g ‐indium(III) complex was found to be an efficient catalyst for the allylation of the aromatic α‐keto phosphonates. The corresponding α‐hydroxy phosphonates were obtained with high yields (up to 98 %) and high enantioselectivities (up to 91 % ee). A bifunctional catalyst system was described with an N‐oxide as Lewis base activating tetraallyltin and indium as Lewis acid activating aromatic α‐keto phosphonates. A possible catalytic cycle has been proposed to explain the mechanism of the reaction.     

Enzymatic degradation of blends of poly(ε‐caprolactone) and poly(styrene‐co‐acrylonitrile) by Pseudomonas lipase

In polymer blends, the composition and microcrystalline structure of the blend near surfaces can be markedly different from the bulk properties. In this study, the enzymatic degradation of poly(ε‐caprolactone) (PCL) and its blends with poly(styrene‐co‐acrylonitrile) (SAN) was conducted in a phosphate buffer solution containing Pseudomonas lipase, and the degradation behavior was correlated with the surface properties and crystalline microstructure of the blends. The enzymatic degradation preferentially took place at the amorphous part of PCL film. The melt‐quenched PCL film with low crystallinity and small lamellar thickness showed a higher degradation rate compared with isothermally crystallized (at 36, 40, and 44°C) PCL films. Also, there was a vast difference in the enzymatic degradation behavior of pure PCL and PCL/SAN blends. The pure PCL showed 100% weight loss in a very short time (i.e., 72 h), whereas the PCL/SAN blend containing just 1% SAN showed ～50% weight loss and the degradation ceased, and the blend containing 40% SAN showed almost no weight loss. These results suggest that as degradation proceeds, the nondegradable SAN content increases at the surface of PCL/SAN films and prevents the lipase from attacking the biodegradable PCL chains. This phenomenon was observed even for a very high PCL content in the blend samples. In the blend with low PCL content, the inaccessibility of the amorphous interphase with high SAN content prevented the attack of lipase on the lamellae of PCL. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 868–879, 2002     

Synthesis of Valuable Chiral Intermediates by Isolated Ketoreductases: Application in the Synthesis of α‐Alkyl‐β‐hydroxy Ketones and 1,3‐Diols

Regio‐ and stereoselective reductions of α‐substituted 1,3‐diketones to the corresponding β‐keto alcohols or 1,3‐diols by using commercially available ketoreductases (KREDs) are described. A number of α‐monoalkyl‐ or dialkyl‐substituted symmetrical as well as non‐symmetrical diketones were reduced in high optical purities and chemical yields, in one or two enzymatic reduction steps. In most cases, two or even three out of the four possible diastereomers of α‐alkyl‐β‐keto alcohols were synthesized by using different enzymes, and in two examples both ketones were reduced to the 1,3‐diol. By replacing the α‐alkyl substituent with the OAc group, 1‐keto‐2,3‐diols, as well as 1,2,3‐triols were synthesized in high optical purities. These enzymatic reactions provide a simple, highly stereoselective and quantitative method for the synthesis of different diastereomers of valuable chiral synthons from non‐chiral, easily accessible 1,3‐diketones.     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Exploring the Biocatalytic Scope of Alditol Oxidase from Streptomyces coelicolor

The substrate scope of the flavoprotein alditol oxidase (AldO) from Streptomyces coelicolor A3(2), recombinantly produced in Escherichia coli, was explored. While it has been established that AldO efficiently oxidizes alditols to D ‐aldoses, this study revealed that the enzyme is also active with a broad range of aliphatic and aromatic alcohols. Alcohols containing hydroxy groups at the C‐1 and C‐2 positions like 1,2,4‐butanetriol (K_m=170 mM, k_cat=4.4 s⁻¹), 1,2‐pentanediol (K_m=52 mM, k_cat=0.85 s⁻¹) and 1,2‐hexanediol (K_m=97 mM, k_cat=2.0 s⁻¹) were readily accepted by AldO. Furthermore, the enzyme was highly enantioselective for the oxidation of 1,2‐diols [e.g., for 1‐phenyl‐1,2‐ethanediol the (R)‐enantiomer was preferred with an E‐value of 74]. For several diols the oxidation products were determined by GC‐MS and NMR. Interestingly, for all tested 1,2‐diols the products were found to be the α‐hydroxy acids instead of the expected α‐hydroxy aldehydes. Incubation of (R)‐1‐phenyl‐1,2‐ethanediol with ¹⁸O‐labelled water (H₂¹⁸O) revealed that a second enzymatic oxidation step occurs via the hydrate product intermediate. The relaxed substrate specificity, excellent enantioselectivity, and independence of coenzymes make AldO an attractive enzyme for the preparation of optically pure 1,2‐diols and α‐hydroxy acids.     

Immobilisation of different Candida rugosa lipases by adsorption onto polypropylene powder: application to chiral synthesis of ibuprofen and trans‐2‐phenyl‐1‐cyclohexanol esters

Candida rugosa lipases (CRLs) were immobilised by adsorption onto a commercial polypropylene powder EP100?. Two commercial CRLs from Sigma and Amano were used together with two CRLs obtained by fed‐batch fermentation using oleic acid as a carbon source (UAB‐CRL). Significant differences were observed in the isotherm adsorption patterns for the commercial and fermented lipases, probably caused by differences in their polysaccharide content. The commercial lipases showed a classical Langmuir adsorption pattern, whereas fed‐batch produced lipases with high polysaccharide content tended to conform to a BET multilayer adsorption equation. Immobilised CRLs also showed different behaviour in the resolution of two interesting pharmaceutical products: ibuprofen and trans‐2‐phenyl‐1‐cyclohexanol (TPCH) in the enantioselective esterification reaction in organic media. In the case of ibuprofen, CRLs showed important differences in terms of esterification rate, probably due to diffusional limitation effects caused by the high polysaccharide content present in UAB‐CRLs. In the case of TPCH, however, polysaccharide content did not appear to influence the esterification rate. A high enantioselective esterification was observed for all CRLs tested in the resolution of both products. © 2002 Society of Chemical Industry     

Impregnation synthesis of a novel macroporous silica-based crown ether polymeric material modified by 1-dodecanol and its adsorption for strontium and some coexistent metals

4,4′,(5′)-Di-(tert-butylcyclohexano)-18-crown-6(DtBuCH18C6) is a chelating agent having high selectivity mostly for Sr(II). To significantly reduce its leakage by molecular modification, a macroporous silica-based DtBuCH18C6 polymeric composite (DtDo/SiO₂–P) was synthesized. It was performed by impregnating and immobilizing DtBuCH18C6 and 1-dodecanol molecules into the pores of the SiO₂–P particles utilizing an advanced vacuum sucking technique. The adsorption of a few fission and non-fission products Sr(II), Ba(II), Cs(I), Ru(III), Mo(VI), Na(I), K(I), Pd(II), La(III), and Y(III) onto DtDo/SiO₂–P was investigated. It was done by examining the effects of contact time and the HNO₃ concentration in a range of 0.1–5.0 M at 298 K. At the optimum concentration of 2.0 M HNO₃, DtDo/SiO₂–P exhibited strong adsorption ability and high selectivity for Sr(II) great over all of the tested elements, which showed very weak or almost no adsorption except Ba(II). Meanwhile, It was found that the quantity of total organic carbon (TOC) leaked from DtDo/SiO₂–P in 2.0 M HNO₃, 187.5 ppm, was lower than 658.4 ppm that leaked from DtBuCH18C6/SiO₂–P, which was not modified. This was ascribed to the effective association of DtBuCH18C6 and 1-dodecanol through intermolecular interaction. The reduction of DtBuCH18C6 leakage by molecular modification with 1-dodecanol was achieved. It was of great benefit to application of DtDo/SiO₂–P in chromatographic partitioning of Sr(II), one of the main heat generators, from high level liquid waste (HLLW) in reprocessing of nuclear spent fuel in the MAREC (Minor Actinides Recovery from HLLW by Extraction Chromatography) process developed recently.