One-step fabrication of two-dimensional hierarchical Mn2O3@graphene composite as high-performance anode materials for lithium ion batteries

Two-dimensional (2D) hierarchical Mn2O3@graphene composite is synthesized by a one-step solid-phase reaction.The nanosheets of Mn2O3 are vertically grown on few-layered graphene,constructing a unique 2D hierarchical structure.As an anode material for lithium-ion batteries (LIBs),this hierarchical composite displays excellent electrochemical performances,showing an extraordinary reversible discharge capacity of 2125.9 mA h g-1.Moreover,a record high reversible capacity of 1746.8 mA h g-1 is maintained after 100 cycles at a current density of 100 mA g-1,which retains 82.2 ％ of the initial capacity.Such an outstanding performance could be attributed to its novel structure and the synergistic effects between the Mn2O3 and graphene.     

Reassembled graphene-platelets encapsulated silicon nanoparticles for Li-ion battery anodes

Among lithium alloy metals, silicon is an attractive candidate to replace commercial graphite anode because silicon possesses about ten times higher theoretical energy density than graphite. However, electrically nonconducting silicon undergoes a large volume changes during lithiation/delithiation reactions, which causes fast loss of storage capacity upon cycling due to electrode pulverization. To alleviate these problems, electrodes comprising Si nanoparticles (20 nm) and graphene platelets, denoted as SiGP-1 (Si = 35.5 wt%) and SiGP-2 (Si = 57.6 wt%), have been prepared with low cost materials and using easily scalable solution-dispersion methods. X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HR-TEM) analyses indicated that Si nanoparticles were highly dispersed and encapsulated between graphene sheets that stacked into platelets in which portions of graphite phases were reconstituted. From the galvanostatic cycling test, SiGP-1 exhibited a reversible lithiation capacity of approximately 802 mAh/g with excellent capacity retention up to 30 cycles at 100 mA/g. Further cycling with a step-increase of current density (100-1,000 mA/g) up to 120 cycles revealed that it has an appreciable power capability as well, showing 520 mAh/g at 1,000 mA/g with capacity loss of 0.2-0.3% per cycle. The improved electrochemical performance is attributed to the robust electrical integrity provided by flexible graphene sheets that encapsulated dispersed Si nanopraticles and stacked into platelets with portions of reconstituted graphite phases in their structure.     

Closely packed Si@C and Sn@C nano-particles anchored by reduced graphene oxide sheet boosting anode performance of lithium ion batteries

Both silicon and tin are promising anodes for new generation lithium ion batteries due to high lithium storage capacities (theoretically 4200 mA h g-1 and 992 mA h g-1,respectively).However,their large volumetric expansions (both are above 300 ％) usually lead to poor cycling stability.In this case,we synthesized closely packed Si@C and Sn@C nano-particles anchored by reduced graphene oxide (denoted as Si@C/Sn@C/rGO) by the way of solution impregnation and subsequent hydrogenation reduction.Sn particles with a diameter of 100 nm are coated by carbon and surrounded by Si@C particles around 40 nm in average diameter through the high-resolution transmission electron microscopy.Expansions of Si and Sn are alleviated by carbon shells,and reduced graphene oxide sheets accommodate their volume changes.The prepared Si@C/Sn@C/rGO electrode delivers an enhanced initial coulombic efficiency (78％),rate capability and greatly improved cycle stability (a high reversible capacity of nearly 1000 mA h g-1 is achieved after 300 cycles at a current density of 1000 mA g-1).It can be believed that packing Sn@C nano-particles with Si@C relieves the volume expansion of both and releases the expansion stresses.Sn@C particles enhance anode process kinetics by reducing charge transfer resistance and increasing lithium ion diffusion coefficient.The present work provides a viable strategy for facilely synthesizing silicon-tin-carbon composite anode with long life.     

Interface-modulated fabrication of hierarchical yolk–shell Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/C dodecahedrons as stable anodes for lithium and sodium storage

Transition-metal oxides (TMOs) have gradually attracted attention from researchers as anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) because of their high theoretical capacity.However,their poor cycling stability and inferior rate capability resulting from the large volume variation during the lithiation/sodiation process and their low intrinsic electronic conductivity limit their applications.To solve the problems of TMOs,carbon-based metal-oxide composites with complex structures derived from metal-organic frameworks (MOFs) have emerged as promising electrode materials for LIBs and SIBs.In this study,we adopted a facile interface-modulated method to synthesize yolk-shell carbon-based Co3O4 dodecahedrons derived from ZIF-67 zeolitic imidazolate frameworks.This strategy is based on the interface separation between the ZIF-67 core and the carbon-based shell during the pyrolysis process.The unique yolk-shell structure effectively accommodates the volume expansion during lithiation or sodiation,and the carbon matrix improves the electrical conductivity of the electrode.As an anode for LIBs,the yolk-shell Co3O4/C dodecahedrons exhibit a high specific capacity and excellent cycling stability (1,100 mAh·g-1 after 120 cycles at 200 mA·g-1).As an anode for SIBs,the composites exhibit an outstanding rate capability (307 mAh·g-1 at 1,000 mA·g-1 and 269 mAh·g-1 at 2,000 mA·g-1).Detailed electrochemical kinetic analysis indicates that the energy storage for Li+ and Na+ in yolk-shell Co3O4/C dodecahedrons shows a dominant capacitive behavior.This work introduces an effective approach for fabricating carbonbased metal-oxide composites by using MOFs as ideal precursors and as electrode materials to enhance the electrochemical performance of LIBs and SIBs.     

Graphene‐Bonded and ‐Encapsulated Si Nanoparticles for Lithium Ion Battery Anodes

Silicon (Si) has been considered a very promising anode material for lithium ion batteries due to its high theoretical capacity. However, high‐capacity Si nanoparticles usually suffer from low electronic conductivity, large volume change, and severe aggregation problems during lithiation and delithiation. In this paper, a unique nanostructured anode with Si nanoparticles bonded and wrapped by graphene is synthesized by a one‐step aerosol spraying of surface‐modified Si nanoparticles and graphene oxide suspension. The functional groups on the surface of Si nanoparticles (50–100 nm) not only react with graphene oxide and bind Si nanoparticles to the graphene oxide shell, but also prevent Si nanoparticles from aggregation, thus contributing to a uniform Si suspension. A homogeneous graphene‐encapsulated Si nanoparticle morphology forms during the aerosol spraying process. The open‐ended graphene shell with defects allows fast electrochemical lithiation/delithiation, and the void space inside the graphene shell accompanied by its strong mechanical strength can effectively accommodate the volume expansion of Si upon lithiation. The graphene shell provides good electronic conductivity for Si nanoparticles and prevents them from aggregating during charge/discharge cycles. The functionalized Si encapsulated by graphene sample exhibits a capacity of 2250 mAh g^?1 (based on the total mass of graphene and Si) at 0.1C and 1000 mAh g^?1 at 10C, and retains 85% of its initial capacity even after 120 charge/discharge cycles. The exceptional performance of graphene‐encapsulated Si anodes combined with the scalable and one‐step aerosol synthesis technique makes this material very promising for lithium ion batteries.     

Micro-nano structured VNb9O25 anode with superior electronic conductivity for high-rate and long-life lithium storage

The oxygen vacancies and micro-nano structure can optimize the electron/Li+migration kinetics in anode materials for lithium batteries(LIBs).Here,porous micro-nano structured VNb9O25 composites with rich oxygen vacancies were reasonably prepared via a facile solvothermal method combined with annealing treatment at 800℃for 30 h(VNb9 O25-30 h).This micro-nano structure can enhance the contact of active material/electrolyte,and shorten the Li+diffusion distance.The introduction of oxygen vacancies can further boosts the intrinsic conductivity of VNb9O25-30 h for achieving excellent LIB performance.The as-prepared VNb9O25-30 h anode showed advanced rate capability with reversible capacity of 122.2 mA h g-1 at 4 A g-1,and delivered excellent capacity retention of～100％after 2000 cycles.Meanwhile,VNb9O25-30 h provides unexpected long-cycle life(i.e.,reversible capacity of 165.7 mA h g-1 at 1 A g-1 with a high capacity retention of 85.6％even after 8000 cycles).Additionally,coupled with the LiFePO4 cathode,the LiFePO4//VNb9O25-30 h full cell delivers superior LIB properties with high reversible capacities of 91.6 mA h g-1 at 5C for 1000 cycles.Thus,such reasonable construction method can assist in other high-performance niobium-based oxides in LIBs.     

Ultrafine Sn nanocrystals in a hierarchically porous N-doped carbon for lithium ion batteries

We report a simple method of preparing a high performance,Sn-based anode material for lithium ion batteries (LIBs).Adding H2O2 to an aqueous solution containing Sn2+ and aniline results in simultaneous polymerization of aniline and oxidation of Sn2+ to SnO2,leading to a homogeneous composite of polyaniline and SnO2.Hydrogen thermal reduction of the above composite yields N-doped carbon with hierarchical porosity and homogeneously distributed,ultrafine Sn particles.The nanocomposite exhibits excellent performance as an anode material for lithium ion batteries,showing a high reversible specific capacity of 788 mAh·g-1 at a current density of 100 mA·g-1 after 300 cycles and very good stability up to 5,000 mA·g-1.The simple preparation method combined with the good electrochemical performance is highly promising to promote the application of Sn based anode materials.     

Core–Shell Si/C Nanospheres Embedded in Bubble Sheet‐like Carbon Film with Enhanced Performance as Lithium Ion Battery Anodes

Due to its high theoretical capacity and low lithium insertion voltage plateau, silicon has been considered one of the most promising anodes for high energy and high power density lithium ion batteries (LIBs). However, its rapid capacity degradation, mainly caused by huge volume changes during lithium insertion/extraction processes, remains a significant challenge to its practical application. Engineering Si anodes with abundant free spaces and stabilizing them by incorporating carbon materials has been found to be effective to address the above problems. Using sodium chloride (NaCl) as a template, bubble sheet‐like carbon film supported core–shell Si/C composites are prepared for the first time by a facile magnesium thermal reduction/glucose carbonization process. The capacity retention achieves up to 93.6% (about 1018 mAh g^?1) after 200 cycles at 1 A g^?1. The good performance is attributed to synergistic effects of the conductive carbon film and the hollow structure of the core–shell nanospheres, which provide an ideal conductive matrix and buffer spaces for respectively electron transfer and Si expansion during lithiation process. This unique structure decreases the charge transfer resistance and suppresses the cracking/pulverization of Si, leading to the enhanced cycling performance of bubble sheet‐like composite.     

Hollow multi-nanochannel carbon nanofiber/MoS2 nanoflower composites as binder-free lithium-ion battery anodes with high capacity and ultralong-cycle life at large current density

The electrode materials with high pseudocapacitance can enhance the rate capability and cycling stabil-ity of lithium-ion storage devices.Herein,we fabricated MoS2 nanoflowers with ultra-large interlayer spacing on N-doped hollow multi-nanochannel carbon nanofibers(F2-MoS2/NHMCFs)as freestanding binder-free anodes for lithium-ion batteries(LIBs).The ultra-large interlayer spacing(0.78～1.11 nm)of MoS2 nanoflowers can not only reduce the internal resistance,but also increase accessible active sur-face area,which ensures the fast Li+intercalation and deintercalation.The NHMCFs with hollow and multi-nanochannel structure can accommodate the large internal strain and volume change during lithi-ation/delithiation process,it is beneficial to improving the cycling stability of LIBs.Benefiting from the above combined structure merits,the F2-MoS2/NHMCFs electrodes deliver a high rate capability 832 mA h g-1 at 10 A g-1 and ultralong cycling stability with 99.29 and 91.60％capacity retention at 10 A g-1 after 1000 and 2000 cycles,respectively.It is one of the largest capacities and best cycling stability at 10 A g-1 ever reported to date,indicating the freestanding F2-MoS2/NHMCFs electrodes have potential applications in high power density LIBs.     

Bimetallic zeolitic imidazolate framework-derived substrate-free anode with superior cyclability for high-capacity lithium-ion batteries

Freestanding carbon nanofibers loaded with bimetallic hollow nanocage structures were synthesized.The nanocages inherited the rhombic dodecahedral morphology of the zeolitic imidazolate framework(ZIF)precursors,ZIF-8 and ZIF-67.As anode materials for lithium-ion batteries(LIBs),the bimetallic nanocage-loaded freestanding carbon nanofibers effectively buffered volume expansions and alleviated pulverization through their different reduction and oxidation potentials.The higher capacities of the composite anodes arose via the formation of the Li_xZn alloy and Li₂O by Zn and Co ions,respectively,and the enhanced conductivity conferred by the carbon nanofibers.A synergistic effect of the composite components toward the strong electrochemical performance(688 m A h·g^-1at 1200 m A·g^-1)of the bimetallic nanocage-loaded fibers was demonstrated through the superior long-term stability of the anode(1048 m A h·g^-1after 300 cycles at 100 m A·g^-1),suggesting that the fabricated anode can be a promising material for use in portable LIBs.     

Fe~(3+) -stabilized Ti_3C_2T_x MXene enables ultrastable Li-ion storage at low temperature

It is highly important to develop ultrastable electrode materials for Li-ion batteries(LIBs),especially in the low temperature.Herein,we report Fe³⁺-stabilized Ti₃C₂T_x MXene(donated as T/F-4:1)as the anode material,which exhibits an ultrastable low-temperature Li-ion storage property(135.2 m A h g^-1after300 cycles under the current density of 200 m A g^-1at-10℃),compared with the negligible capacity for the pure Ti₃C₂T_x MXene(26 m A h g^-1at 200 m A g^-1).We characterized as-made T/F samples via the Xray photoelectron spectroscopy(XPS),Fourier transformed infrared(FT-IR)and Raman spectroscopy,and found that the terminated functional groups(-O and-OH)in T/F are Li⁺ storage sites.Fe³⁺-stabilization makes-O/-OH groups in MXene interlayers become active towards Li⁺,leading to much more active sites and thus an enhanced capacity and well cyclic stability.In contrast,only-O/-OH groups on the top and bottom surfaces of pure Ti₃C₂T_x MXene can be used to adsorb Li⁺,resulting in a low capacity.Transmission electron microscopy(TEM)and XPS data confirm that T/F-4:1 holds the highly stable solid electrolyte interphase(SEI)layer during the cycling at-10℃.Density functional theory(DFT)calculations further uncover that T/F has fast diffusion of Li⁺ and consequent better electrochemical performances than pure Ti₃C₂T_x MXene.It is believed that the new strategy used here will help to fabricate advanced MXene-based electrode materials in the energy storage application.     

Spinel-layered integrate structured nanorods with both high capacity and superior high-rate capability as cathode material for lithium-ion batteries

Spinel phase LiMn2O4 was successfully embedded into monoclinic phase layeredstructured Li2MrnO3 nanorods,and these spinel-layered integrate structured nanorods showed both high capacities and superior high-rate capabilities as cathode material for lithium-ion batteries (LIBs).Pristine Li2MnO3 nanorods were synthesized by a simple rheological phase method using α-MnO2 nanowires as precursors.The spinel-layered integrate structured nanorods were fabricated by a facile partial reduction reaction using stearic acid as the reductant.Both structural characterizations and electrochemical properties of the integrate structured nanorods verified that LiMn2O4 nanodomains were embedded inside the pristine Li2MnO3 nanorods.When used as cathode materials for LIBs,the spinel-layered integrate structured Li2MnO3 nanorods (SL-Li2MnO3) showed much better performances than the pristine layered-structured Li2MnO3 nanorods (L-Li2MnO3).When charge-discharged at 20 mA·g-1 in a voltage window of 2.0-4.8 V,the SL-Li2MnO3 showed discharge capadties of 272.3 and 228.4 mAh.g-1 in the first and the 60th cycles,respectively,with capacity retention of 83.8％.The SL-Li2MnO3 also showed superior high-rate performances.When cycled at rates of 1 C,2 C,5 C,and 10 C (1 C =200 mA·g-1) for hundreds of cycles,the discharge capacities of the SL-Li2MnO3 reached 218.9,200.5,147.1,and 123.9 mAh·g-1,respectively.The superior performances of the SL-Li2MnO3 are ascribed to the spineMayered integrated structures.With large capacities and superior high-rate performances,these spinel-layered integrate structured materials are good candidates for cathodes of next-generation high-power LIBs.     

锂离子电池负极材料Si@C/SiOx的制备及其电化学性能

硅理论比容量高, 放电平台低, 是商业化锂离子电池石墨负极的替代材料之一, 但是其充放电循环中体积变化大, 容量衰减迅速, 制约了其商业化使用。本研究通过一步法制备了具有核壳结构的硅@碳/硅氧化物(Si@C/SiO_x), 将其作为锂离子电池负极材料。采用SEM、TEM、XRD、XPS等手段对所制备材料的微观形貌、结构以及组分进行了分析, 并对其进行了相关的电化学测试。结果表明, Si@C/SiO_x核壳材料比Si@C核壳材料具备更优良的电化学性能。在200 mA/g电流密度下, 循环45次后, Si@C的容量保持率为60.2%; 而当C/SiO_x作为Si核外壳时, 200 mA/g电流密度下, 循环45次后, Si@C/SiO_x比容量值为787.2 mAh/g, 容量保持率提高到87.3%。这主要是由于C与SiO_x复合后, 外壳的机械强度大于碳壳, 能够较好地缓冲Si体积膨胀产生的巨大应力, 从而保证结构的完整性, 提高了硅基负极材料的商业化应用的可能性。     

NaFeTiO4 nanorod/multi-walled carbon nanotubes composite as an anode material for sodium-ion batteries with high performances in both half and full cells

NaFeTiO4 nanorods of high yields (with diameters in the range of 30-50 nm and lengths of up to 1-5 μm) were synthesized by a facile sol-gel method and were utilized as an anode material for sodium-ion batteries for the first time.The obtained NaFeTiO4 nanorods exhibit a high initial discharge capacity of 294 mA·h·g-1 at 0.2 C (1 C =177 mA·g-1),and remain at 115 mA·h·g-1 after 50 cycles.Furthermore,multi-walled carbon nanotubes (MWCNTs) were mechanically milled with the pristine material to obtain NaFeTiO4/MWCNTs.The NaFeTiO4/MWCNTs electrode exhibits a significantly improved electrochemical performance with a stable discharge capacity of 150 mA·h·g-1 at 0.2 C after 50 cycles,and remains at 125 mA·h·g-1 at 0.5 C after 420 cycles.The NaFeTiO4/MWCNTs//Na3V2(PO4)3/C full cell was assembled for the first time;it displays a discharge capacity of 70 mA·h·g-1 after 50 cycles at 0.05 C,indicating its excellent performances.X-ray photoelectron spectroscopy,ex situ X-ray diffraction,and Raman measurements were performed to investigate the initial electrochemical mechanisms of the obtained NaFeTiO4/MWCNTs.     

Binder-free graphene/carbon nanotube/silicon hybrid grid as freestanding anode for high capacity lithium ion batteries

Light-weight graphene/Si (G/Si) hybrid binder-free electrode is deemed a high energy density anode contender for lithium ion batteries (LIBs). However, paper-like G/Si electrodes tend to show an increased migration distance for Li⁺ through the fast interlayer channel with the increment of electrode size, in addition to an intrinsically slow diffusion kinetics; thereby encumbering their commercial realisation in high energy density and long life LIBs. To address these problems, herein, sandwich-structured graphene/carbon nanotube/silicon (G/CNT/Si, Si: 56 wt.%, ∼500 nm) hybrid grid is designed, cognizant of its uniform and shorter Li⁺ migration distance. Cyclic voltammograms indicate G/CNT/Si paper and grid anode to exhibit good electrochemical activity at both low and high temperatures. Noteworthy is that the Li⁺ diffusion coefficient ratio between G/CNT/Si grid and paper anodes are 1.82, 1.64, 1.43, 1.36 and 1.53 at a temperature of −5, 10, 25, 40 and 55 °C, respectively. The initial coulombic efficiencies of both paper and grid anode are as high as ∼82%. After 60 cycles at 420 mA g⁻¹, the charge capacity of G/CNT/Si grid is retained at 808 mA h g⁻¹, which by far surpasses that of paper anode (i.e., 490 mA h g⁻¹). The attained lithium ion storage performance at both high and low temperatures, underpins the G/CNT/Si sandwiched grid as effective to realise the practical deployment of paper-like graphene electrodes for high energy density and long life LIBs.     

Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications

Silicon has been intensively studied as an anode material for lithium‐ion batteries (LIB) because of its exceptionally high specific capacity. However, silicon‐based anode materials usually suffer from large volume change during the charge and discharge process, leading to subsequent pulverization of silicon, loss of electric contact, and continuous side reactions. These transformations cause poor cycle life and hinder the wide commercialization of silicon for LIBs. The lithiation and delithiation behaviors, and the interphase reaction mechanisms, are progressively studied and understood. Various nanostructured silicon anodes are reported to exhibit both superior specific capacity and cycle life compared to commercial carbon‐based anodes. However, some practical issues with nanostructured silicon cannot be ignored, and must be addressed if it is to be widely used in commercial LIBs. This Review outlines major impactful work on silicon‐based anodes, and the most recent research directions in this field, specifically, the engineering of silicon architectures, the construction of silicon‐based composites, and other performance‐enhancement studies including electrolytes and binders. The burgeoning research efforts in the development of practical silicon electrodes, and full‐cell silicon‐based LIBs are specially stressed, which are key to the successful commercialization of silicon anodes, and large‐scale deployment of next‐generation high energy density LIBs.     

基于ZIF-8的三维网络硅碳复合材料锂离子电池性能研究

锂离子电池已广泛应用于各种便携式电子设备及新能源汽车等领域, 但随着电子设备的不断更新换代及电动汽车的快速发展, 理论比容量较低的传统石墨负极(372 mAh/g)已无法满足社会的需求。基于此, 本工作设计并制备了一种Zn基金属有机物框架(ZIF-8)衍生的三维网络状硅碳(Si@NC)复合材料用于锂离子电池性能研究。首先对纳米硅表面进行化学改性,然后在改性的硅表面原位生长ZIF-8小颗粒(Si@ZIF-8), 最后对Si@ZIF-8碳化得到Si@NC复合材料。研究表明, Si@NC复合材料的三维网络状多孔结构既可以很好地限制硅的体积膨胀, 又能极大地提升材料的电导率, 展现出稳定的循环性能和良好的倍率性能, 在5 A/g的大电流下能保持760 mAh/g的放电比容量。与商业三元正极材料组装的全电池也表现出较好的性能, 在0.4C (1C =160 mA/g)下循环50圈依然可以保持60.4%的比容量。这些研究结果说明该Si@NC复合材料具有较好的应用前景。     

An Electrosynthesized 3D Porous Molybdenum Sulfide/Graphene Film with Enhanced Electrochemical Performance for Lithium Storage

Molybdenum sulfide/graphene composites are promising anode materials for lithium‐ion batteries (LIBs). In this work, MoS_x/graphene composite film with an ideal 3D porous structure is developed via a facile and straightforward electrochemical route. The MoS_x nanoparticles are uniformly anchored on the graphene nanosheets that are randomly arranged, resulting in MoS_x/graphene composites with well‐developed porous structure. Benefiting from such structure and the synergistic effect from two components, this material shows a high specific capacity over 1200 mA h g^?1, an excellent rate performance, and superior cycling stability. The dominating pseudocapacitive behavior in Li storage contributes to the outstanding rate capacity. Importantly, this kind of novel material can be easily produced as 3D microelectrodes for microscaled LIBs that are highly demanded for autonomous microelectronic systems.     

Si@环化聚丙烯腈/多壁碳纳米管负极复合材料的制备及电化学性能

通过简单高能球磨和高温热解法制备了锂离子电池Si/C电极复合材料,聚丙烯腈（PAN）包覆的纳米颗粒（Si@PAN）与多壁碳纳米管（MWCNTs）混合,制得Si@环化PAN/MWCNTs（Si@c-PAN/MWCNTs）复合材料作为锂离子电池的负极材料。包覆在纳米Si外层的高温热解后的PAN能够有效缓冲Si在充放电过程中巨大的体积变化产生的应力,同时MWCNTs作为Si@c-PAN的基体阻止Si@c-PAN颗粒的团聚,也提高了Si@c-PAN/MWCNTs复合材料电极的导电性能。电化学测试结果表明,Si@c-PAN/MWCNTs复合材料电极在电流密度为0.2 A/g时,其首次放电比容量达到2 098 mA?h/g,库伦效率达到86%;循环50次后Si@c-PAN/MWCNTs复合材料电极的可逆比容量仍能够达到1 278 mA?h/g,在2 A/g放电时其比容量为600 mA?h/g,仍保持良好的循环稳定性。      

中空海胆状结构的碳包覆Fe2O3用作锂离子电池的高性能负极材料

Fe2O3由于成本低廉,储量丰富和理论比容量高(1007 mA hg^-1)等特点,在锂离子电池负极材料的应用中极具发展前景.然而一些问题仍然存在,如:充放电过程中比容量的迅速衰减,不可逆的体积膨胀以及较短的循环寿命等.这些问题严重制约了Fe2O3在锂离子电池中的实际应用.为了突破这些局限,本文以金属-有机骨架(MOF...