Ciclopirox delivery into the human nail plate using novel lipid diffusion enhancers

Context: Onychomycosis is a common fungal infection of the nail plate and bed that affects up to 14% of the population and can have a substantial impact on the quality of life of those affected.

Objective: This study compared the onychopharmacokinetics, nail absorption, nail distribution, and nail penetration of [¹⁴C]-ciclopirox dissolved in novel lipid diffusion enhancers with that of a commercial ciclopirox nail lacquer using the in vitro finite dose model.

Materials and methods: The penetration rate of ciclopirox was determined by applying doses of topical formulation twice daily to human nail plates for 11?d. Drug absorption was then measured by monitoring its rate of appearance in each nail layer and in the cotton pad/nail supporting bed.

Results: After a multiple day treatment, cumulative concentrations of ciclopirox formulated with lipid enhancers in the deep nail layer and the nail bed were significantly greater than cumulative concentrations of the commercial ciclopirox lacquer (p?Conclusion: When formulated with lipid enhancers, the amount of ciclopirox in the ventral/intermediate layer and supporting bed dramatically exceed the inhibitory concentration of ciclopirox for the most common onychomycosis organisms. These results suggest that topical ciclopirox with lipid enhancers has the potential to be an effective topical treatment for onychomycosis, and the lipidic pathway of the nail can be utilized as a means of effective transungual delivery.     

Intradermal and follicular delivery of adapalene liposomes

Abstract

Background: Adapalene is a widely used topical anti-acne drug; however, it has many side effects. Liposomal drug delivery can play a major role by targeting delivery to pilosebaceous units, reducing side effects and offering better patient compliance.

Objective: To prepare and evaluate adapalene-encapsulated liposomes for their physiochemical and skin permeation properties.

Methods: A liposomal formulation of adapalene was prepared by the film hydration method and characterized for shape, size, polydispersity index (PDI), encapsulation efficiency and thermal behavior by techniques such as Zetasizer®, differential scanning calorimetry and transmission electron microscopy. Stability of the liposomes was evaluated for three months at different storage conditions. In vitro skin permeation studies and confocal laser microscopy were performed to evaluate adapalene permeation in pig ear skin and hair follicles.

Results: The optimized process and formulation parameters resulted in homogeneous population of liposomes with a diameter of 86.66?±?3.5?nm in diameter and encapsulation efficiency of 97.01?±?1.84% w/w. In vitro permeation studies indicated liposomal formulation delivered more drug (6.72?±?0.83?μg/cm²) in hair follicles than gel (3.33?±?0.26?μg/cm²) and drug solution (1.62?±?0.054?μg/cm²). Drug concentration delivered to the skin layers was also enhanced compared to other two formulations. Confocal microscopy images confirmed drug penetration in the hair follicles when delivered using the liposomal formulation.

Conclusion: Adapalene was efficiently encapsulated in liposomes and led to enhanced delivery in hair follicles, the desired target site for acne.     

Histological assessment of follicular delivery of flutamide by solid lipid nanoparticles: potential tool for the treatment of androgenic alopecia

Abstract

Context: Flutamide is a potent anti-androgen with the several unwanted side effects in systemic administration, therefore, it has attracted special interest in the development of topically applied formulations for the treatment of androgenic alopecia.

Objective: The purpose of this study was to prepare and characterize the solid lipid nanoparticles (SLNs) of Flutamide for follicular targeting in the treatment of the androgenic alopecia.

Methods: Flutamide-loaded SLNs, promising drug carriers for topical application were prepared by hot melt homogenization method. Drug permeation and accumulation in the exercised rat skin and histological study on the male hamsters were performed to assess drug delivery efficiency in vitro and in vivo, respectively.

Results: The optimized Flutamide-loaded SLNs (size 198?nm, encapsulation efficiency percentage 65% and loading efficiency percentage 3.27%) exhibited a good stability during the period of at least 2 months. The results of X-ray diffraction showed Flutamide amorphous state confirming uniform drug dispersion in the SLNs structure. Higher skin drug deposition (1.75 times) of SLN formulation compared to Flutamide hydroalcoholic solution represented better localization of the drug in the skin. The in vivo studies showed more new hair follicle growth by utilizing Flutamide-loaded SLNs than Flutamide hydroalcoholic solution which could be due to the higher accumulation of SLNs in the hair follicles as well as slowly and continues release of the Flutamide through the SLNs maximizing hair follicle exposure by antiandrogenic drug.

Conclusion: It was concluded Flutamide-loaded SLN formulation can be used as a promising colloidal drug carriers for topical administration of Flutamide in the treatment of androgenic alopecia.     

Preparation and evaluation of optimized zolmitriptan niosomal emulgel

Objective: Novel niosomal formulation may be successfully applied to treat a systemic disease such as migraine through transdermal drug delivery system (TDDS), moreover, the treatment of topical diseases such as mycotic infections by targeting and localizing the drug to the stratum corneum. The current study aims to formulate zolmitriptan (Zt) in niosomal vesicles to potentiate its transdermal effect.

Significance: The development of a promising niosomal formulation will push the scaling up of pharmaceutical industry in this field.

Methods: Design- Expert 10 was used to design twelve formulations using Box-Behnken. Zt loaded niosomes were prepared by the thin film hydration method using Span 60(S 60), Span 80(S 80) along with cholesterol(Ch) at three different levels. The optimized formulation (F11) was formulated in Emulgel (1:1 emulsion/gel ratio).

Results: The vesicles revealed vesicle size (VS) ranging from 133.1 to 851.3?nm, zeta potential (ZP) ?43.8 to ?82.8?mV, entrapment efficiency (EE%) from 66.7 to 88.7%, and Zt release after 4?h up to 67%. Optimized niosomal formulation (F11) depicted the smallest VS (133.1?nm), highest EE (88.7%), high ZP (?80.6?mV) and satisfactory release after 4?h (61.5%). There was a significant difference (p <.05) in drug permeation after 8?h for niosomal F11(460.98?ug/cm²) and niosomal F11 loaded Emulgel (336.92?ug/cm²) compared to plain Zt loaded emulgel (160.83?ug/cm²). Niosomal F11 loaded emulgel showed thixotropic behavior of rapid recovery, significant bioavailability and pharmacokinetic parameters as compared to the plain Zt-loaded Emulgel.

Conclusion: Optimized F11 represents a promising formulation for transdermal drug delivery system to treat both topical and systemic diseases.     

Nanocarrier-based topical drug delivery for an antifungal drug

Objective: The conventional liposomal amphotericin B causes many unwanted side effects like blood disorder, nephrotoxicity, dose-dependent side effects, highly variable oral absorption and formulation-related instability. The objective of the present investigation was to develop cost-effective nanoemulsion as nanocarreir for enhanced and sustained delivery of amphotericin B into the skin.

Methods and characterizations: Different oil-in-water nanoemulsions were developed by varying the composition of hydrophilic (Tween® 80) surfactants and co-surfactant by the spontaneous titration method. The developed formulation were characterized, optimized, evaluated and compared for the skin permeation with commercial formulation (fungisome 0.01% w/w). Optimized formulations loaded with amphotericin B were screened using varied concentrations of surfactants and co-surfactants as decided by the ternary phase diagram.

Results and discussion: The maximum % transmittance obtained were 96.9?±?1.0%, 95.9?±?3.0% and 93.7?±?1.2% for the optimized formulations F-I, F-III and F-VI, respectively. These optimized nanoemulsions were subjected to thermodynamic stability study to get the most stable nanoemulsions (F-I). The results of the particle size and zeta potential value were found to be 67.32?±?0.8 nm and –3.7?±?1.2?mV for the final optimized nanoemulsion F-I supporting transparency and stable nanoemulsion for better skin permeation. The steady state transdermal flux for the formulations was observed between 5.89?±?2.06 and 18.02?±?4.3?µg/cm²/h whereas the maximum enhancement ratio were found 1.85- and 3.0-fold higher than fungisome and drug solution, respectively, for F-I. The results of the skin deposition study suggests that 231.37?±?3.6?µg/cm² drug deposited from optimized nanoemulsion F-I and 2.11-fold higher enhancement ratio as compared to fungisome. Optimized surfactants and co-surfactant combination-mediated transport of the drug through the skin was also tried and the results were shown to have facilitated drug permeation and skin perturbation (SEM).

Conclusion: The combined results suggested that amphotericin B nanoemulsion could be a better option for localized topical drug delivery and have greater potential as an effective, efficient and safe approach.     

Enhanced topical delivery of tacrolimus by a carbomer hydrogel formulation with transcutol P

Tacrolimus (TAC), a non-steroidal anti-inflammatory and immunosuppressive agent, is used for the treatment of atopic dermatitis (AD) and skin immune diseases. TAC-loaded topical hydrogel formulations composed of carbomer, carnosine, transcutol P (diethylene glycol monoethyl ether) and humectant were prepared. For comparison, TAC-loaded topical cream-type formulations were also prepared and commercially available TAC ointment was used as a reference. A drug release study in vitro revealed that the total amount of TAC released from hydrogels over 24?h was approximately 30 times greater than that for the reference formulation. Compared to the reference ointment and creams, carbomer gel formulations showed higher skin permeation and retention of TAC (significantly different at p?相似文献   

Onychopharmacokinetics of terbinafine hydrochloride penetration from a novel topical formulation into the human nail in vitro

This study determined the onychopharmacokinetics, nail absorption, distribution, and penetration of [¹⁴C]-terbinafine HCl in a new topical formulation into/through the human finger nail using the in vitro finite dose model. This study determined the penetration rate of terbinafine HCl from multiple doses of topical formulation applied daily for 14 days. Results showed that the total dose recovery (mass balance) was almost 100%. The concentration of terbinafine HCl in the deeper nail plate (ventral/intermediate layers) and the cotton-pad nail bed samples after the 14-day treatment were 613?±?145 and (±S.D.) and 27?±?1.2 µg/cm³ (or 1.9?±?0.6 µg/cm³ daily) on average, respectively. In comparison with nail concentration data from the literature for other topical terbinatine formulations, our results show that higher amounts of terbinafine HCl reached the deep nail plate and/or the nail bed after a 14-day topical treatment with this topical formulation in vitro.     

Development and in vitro evaluation of a nanoemulsion for transcutaneous delivery

Objective: The purpose of this study is to develop a nanoemulsion formulation for its use as a transcutaneous vaccine delivery system.

Materials and methods: With bovine albumin-fluorescein isothiocyanate conjugate (FITC-BSA) as a vaccine model, formulations were selected with the construction of pseudo-ternary phase diagrams and a short-term stability study. The size of the emulsion droplets was furthered optimized with high-pressure homogenization. The optimized formulation was evaluated for its skin permeation efficiency. In vitro skin permeation studies were conducted with shaved BALB/c mice skin samples with a Franz diffusion cell system. Different drug concentrations were compared, and the effect of the nanoemulsion excipients on the permeation of the FITC-BSA was also studied.

Results: The optimum homogenization regime was determined to be five passes at 20?000?psi, with no evidence of protein degradation during processing. With these conditions, the particle diameter was 85.2?nm?±?15.5?nm with a polydispersity index of 0.186?±?0.026 and viscosity of 14.6 cP?±?1.2 cP. The optimized formulation proved stable for 1 year at 4?°C. In vitro skin diffusion studies show that the optimized formulation improves the permeation of FITC-BSA through skin with an enhancement ratio of 4.2 compared to a neat control solution. Finally, a comparison of the skin permeation of the nanoemulsion versus only the surfactant excipients resulted in a steady state flux of 23.44?μg/cm²/h for the nanoemulsion as opposed to 6.10?μg/cm²/h for the emulsifiers.

Conclusion: A novel nanoemulsion with optimized physical characteristics and superior skin permeation compared to control solution was manufactured. The formulation proposed in this study has the flexibility for the incorporation of a variety of active ingredients and warrants further development as a transcutaneous vaccine delivery vehicle.     

Ungual and transungual drug delivery

Topical therapy is desirable in treatment of nail diseases like onychomycosis (fungal infection of nail) and psoriasis. The topical treatment avoids the adverse effects associated with systemic therapy, thereby enhancing the patient compliance and reducing the treatment cost. However the effectiveness of the topical therapies has been limited due to the poor permeability of the nail plate to topically applied therapeutic agents. Research over the past one decade has been focused on improving the transungual permeability by means of chemical treatment, penetration enhancers, mechanical and physical methods. The present review is an attempt to discuss the different physical and chemical methods employed to increase the permeability of the nail plate. Minimally invasive electrically mediated techniques such as iontophoresis have gained success in facilitating the transungual delivery of actives. In addition drug transport across the nail plate has been improved by filing the dorsal surface of the nail plate prior to application of topical formulation. But attempts to improve the trans-nail permeation using transdermal chemical enhancers have failed so far. Attempts are on to search suitable physical enhancement techniques and chemical transungual enhancers in view to maximize the drug delivery across the nail plate.     

Improved oral bioavailability of valsartan using proliposomes: design,characterization and in vivo pharmacokinetics

Abstract

The objective of our investigational work was to develop a proliposomal formulation to improve the oral bioavailability of valsartan. Proliposomes were formulated by thin film hydration technique using different ratios of phospholipids:drug:cholesterol. The prepared proliposomes were evaluated for vesicle size, encapsulation efficiency, morphological properties, in vitro drug release, in vitro permeability and in vivo pharmacokinetics. In vitro drug-release studies were performed in simulated gastric fluid (pH 1.2) and purified water using dialysis bag method. In vitro drug permeation was studied using parallel artificial membrane permeation assay (PAMPA), Caco-2 monolayer and everted rat intestinal perfusion techniques. In vivo pharmacokinetic studies were conducted in male Sprague Dawley (SD) rats. Among the proliposomal formulations, F-V was found to have the highest encapsulation efficiency of 95.6?±?2.9% with a vesicle size of 364.1?±?14.9?nm. The in vitro dissolution studies indicated an improved drug release from proliposomal formulation, F-V in comparison to pure drug suspension in both, purified water and pH 1.2 dissolution media after 12?h. Permeability across PAMPA, Caco-2 cell and everted rat intestinal perfusion studies were higher with F-V formulation as compared to pure drug. Following single oral administration of F-V formulation, a relative bioavailability of 202.36% was achieved as compared to pure valsartan.     

Solid lipid nanoparticles as vesicles for oral delivery of olmesartan medoxomil: formulation,optimization and in vivo evaluation

Objective: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery.

Materials and methods: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug–excipients interactions, powder X-ray diffraction analysis and drug release in vitro.

Results and discussion: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100?nm, PDI 0.291, zeta potential of ?23.4?mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration.

Conclusion: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.     

Development of novel amisulpride-loaded liquid self-nanoemulsifying drug delivery systems via dual tackling of its solubility and intestinal permeability

Objective: The aim of the current investigation was at enhancing the oral biopharmaceutical behavior; solubility and intestinal permeability of amisulpride (AMS) via development of liquid self-nanoemulsifying drug delivery systems (L-SNEDDS) containing bioenhancing excipients.

Methods: The components of L-SNEDDS were identified via solubility studies and emulsification efficiency tests, and ternary phase diagrams were constructed to identify the efficient self-emulsification regions. The formulated systems were assessed for their thermodynamic stability, globule size, self-emulsification time, optical clarity and in vitro drug release. Ex vivo evaluation using non-everted gut sac technique was adopted for uncovering the permeability enhancing effect of the formulated systems.

Results: The optimum formulations were composed of different ratios of Capryol? 90 as an oil phase, Cremophor^® RH40 as a surfactant, and Transcutol^® HP as a co-surfactant. All tested formulations were thermodynamically stable with globule sizes ranging from 13.74 to 29.19?nm and emulsification time not exceeding 1?min, indicating the formation of homogenous stable nanoemulsions. In vitro drug release showed significant enhancement from L-SNEDDS formulations compared to aqueous drug suspension. Optimized L-SNEDDS showed significantly higher intestinal permeation compared to plain drug solution with nearly 1.6–2.9 folds increase in the apparent permeability coefficient as demonstrated by the ex vivo studies.

Conclusions: The present study proved that AMS could be successfully incorporated into L-SNEDDS for improved dissolution and intestinal permeation leading to enhanced oral delivery.     

In vitro and in vivo evaluation of a desonide gel-cream photostabilized with benzophenone-3

Context: Our group previously reported the photoinstability of some desonide topical commercial formulations under direct exposure to UVA radiation.

Objective: This study aimed to prepare and characterize a gel-cream containing desonide, with greater photostability than the commercial gel-cream (C-GC). Benzophenone-3 (BP-3) was used as a photostabilizing agent.

Methods: The gel-cream developed (D-GC) containing BP-3 at 0.1% was prepared and characterized regarding its pH, drug content, spreadability, viscosity, in vitro drug release and in vitro permeation. The in vivo anti-inflammatory effect was assessed by ear edema measurement, croton oil-induced acute skin inflammation and myeloperoxidase assay.

Results and Discussion: D-GC presented characteristics compatible with topical application, appropriate drug content and good spreadability, and non-Newtonian behavior with pseudoplastic flow. D-GC showed a good photostability profile, presenting a desonide content of 95.70% after 48?h of exposure to UVA radiation, and stability under room conditions during 60 days. The amount of desonide released from D-GC and C-GC was 57.8 and 51.7?µg/cm², respectively, measured using the vertical Franz cell. The in vitro skin permeation showed that desonide reached the site of action of the topical corticosteroids, from both formulations; however, the desonide amount retained in the dermis was lower with D-GC. The in vivo evaluation of topical anti-inflammatory activity indicated that D-GC presented the same biological effect as C-GC.

Conclusion: D-GC represents a promising approach to treat dermatological disorders, since it presented satisfactory physicochemical characteristics, the same biological activity as C-GC and superior photostability, conferred by the addition of BP-3 at 0.1%.     

Development and Optimization of a Methotrexate Topical Formulation

Abstract

A topical methotrexate (MTX) formulation that would achieve optimal drug buildup in the epidermis and diminish potential systemic toxicity could be of great utility in the treatment of a variety of hyperproliferative skin disorders. In an attempt to develop an optimized MTX topical formulation containing pharmaceutically acceptable excipients, a 2³ factorial design was used to investigate the effects of a fatty alcohol, propylene glycol, and ethanol on the in vitro skin permeation and uptake of MTX. In vitro skin permeation studies were performed using excised human epidermis mounted in flow-through diffusion cells. The results of steady-state flux and skin uptake of MTX from these formulations ranged from 0.035 to 0.315 μg/cm²/hr and 1.146 to 7.929 μg/cm², respectively. Response surface analysis was used to determine the optimum formulation in terms of skin permeation and uptake of MTX.

An optimized cream formulation was developed and compared to a gel formulation containing 3% Azone in hairless mice to evaluate the uptake of MTX in the treated and untreated skin sites as well as the distribution of MTX in the blood and liver following topical application. The results of the in vivo study demonstrated the localization of MTX at the treated site for both formulations without significant uptake of MTX in the distant untreated epidermis and dermis. The levels of MTX in the blood and liver following topical application of the optimized cream were significantly less than those of the gel formulation with 3% Azone.     

Development of a topical mupirocin spray for antibacterial and wound-healing applications

Objective: The aim of this study was to develop mupirocin topical spray using Eudragit E100 as a film-forming agent for the treatment of bacterial skin infections as well as to promote wound healing.

Materials and methods: Twenty-seven of mupirocin formulations were formulated containing Eudragit E100 and other excipients. Mupirocin spray was prepared by aerosol crimping and filling machine using HFA-134a as a propellant. The formulations were evaluated for their stability and physicochemical properties. The factorial study was applied to evaluate the effects of glycerol and PEG400 on mupirocin-loaded Eudragit E100 films. The optimized formulation was assessed of drug release, antibacterial activities and in vitro cell line studies in comparison to the ointment formulation.

Results and discussion: Mupirocin sprays were formulated and optimized to obtain the formulation with excellent physicochemical and mechanical properties of the dressing film. The formulation had an excellent stability up to a year with more than 80% of mupirocin content. Mupirocin was released from the film up to 90% within 2?h. The formulation had a potent antibacterial effect against S. aureus and S. epidermidis. The formulation was safe to use as a topical formulation that had no toxicity to keratinocytes, fibroblasts and monocytes. The formulation also had an antiendotoxin effect without stimulating the production of NO and inflammatory cytokines (IL-1β and TNF-α).

Conclusions: Mupirocin topical spray was successful developed as a topical formulation and can be used instead of the ointment formulation. Animal experiments are warranted to further emphasize the safe use in the human skin.     

Proniosomal gel-mediated transdermal delivery of bromocriptine: in vitro and ex vivo evaluation

Vesicular systems endow large opportunities for the transdermal delivery of therapeutics. The present study was designed to investigate the potential of a novel class of vesicular system ‘proniosome’ as a carrier for transdermal delivery of bromocriptine (BCT). Proniosome formulations were prepared by the coacervation-phase separation method and the influence of factors like surfactant type and its amount, lipid concentration, cholesterol amount and drug content were studied. Span 60 was the most appropriate surfactant, and yielded vesicle size and percentage encapsulation efficiency of 1.3 µm and 98.9%, respectively. The developed system was characterised w.r.t. morphology, transition temperature, drug release, skin permeation and skin irritancy. Proniosomes exhibited a sustained release pattern of BCT in vitro. Skin permeation study revealed high penetration of proniosomes with sustained release of BCT through rat skin. The optimised proniosomal formulation showed enhanced transdermal flux of 16.15 μg/cm²/h as compared to 3.67 μg/cm²/h for drug dispersion. The developed formulations were observed as non-irritant to the rat skin and were found as quite stable at 4 and 25 °C for 90 days w.r.t. vesicle size and drug content. The dried proniosomal formulation could act as a promising alternative to niosomes and preferably for transdermal delivery of BCT.     

Preparation of Coenzyme Q10 nanostructured lipid carriers for epidermal targeting with high-pressure microfluidics technique

Objective: The objective of this work was to prepare coenzyme Q10 loaded nanostructured lipid carriers (Q10-NLC) and evaluate its epidermal targeting effect.

Methods: Q10-NLC was prepared by high-pressure microfluidics technique. Formulations and preparation parameters were optimized with response surface design. Q10-NLC was characterized by PCS, TEM, DSC and PXRD. The penetration of Q10 from the Q10-NLC formulations through skins and into skins were evaluated in vitro using Franz diffusion cells fitted with SD rat skins. In vitro release, long-term stability and light stability were also evaluated.

Results: The results showed that the concentration of solid lipid and emulsifier in formulation had a significant influence on particle size. The optimized preparation parameters were magnetic stirring for 20?min, high stirring at 8000?rpm for 1?min and high-pressure microfluidics at 1200 bar for three cycles. The size of Q10-NLC prepared by optimized formulation and parameters was (151.7?±?2.31) nm, polydispersity (PDI) 0.144, ζ potential was (?44.1?±?1.68) mV, drug loading 2.51%, encapsulation efficiency 100%. In vitro release study, Q10-NLC showed fast release during the first 3 hours and prolonged release afterwards. In vitro skin permeation study, the accumulative uptake of Q10 in epidermal of Q10-NLC was 10.11 times over Q10 emulsion. After exposure to day light for 24 hours, the amount of Q10 in Q10-NLC decreased only 5.59%, while in Q10 emulsion decreased 24.61% and Q10-ethanol solution 49.74%.

Conclusion: Q10-NLC exhibited a significant epidermal targeting effect, which was proved to be a promising carrier for topical delivery of Q10.     

Histopathological evaluation of caffeine-loaded solid lipid nanoparticles in efficient treatment of cellulite

Context: Cellulite refers to dimpled appearance of the skin, usually located in the thighs and buttocks regions of most adult women.

Objective: The aim of this study was to formulate topically used caffeine-loaded solid lipid nanoparticle (SLN) for the treatment of cellulite.

Methods: SLNs were prepared by hot homogenization technique using Precirol® as lipid phase. The physical characterization and stability studies of SLNs as well as in vitro skin permeation and histological studies in rat skin were conducted.

Results: The mean particle size, encapsulation efficiency and loading efficiency percentages for optimized SLN formulation were 94?nm, 86 and 28%, respectively. In vitro drug release demonstrated that caffeine-loaded SLN incorporated into carbopol made hydrogel (caffeine-SLN-hydrogel) exhibited a sustained drug release compared to the caffeine hydrogel over 24?h. Caffeine-loaded SLNs showed a good stability during 12 months of storage at room temperature. The DSC and XRD results showed that caffeine was dispersed in SLN in an amorphous state. In vitro permeation studies illustrated higher drug accumulation in the skin with caffeine-SLN-hydrogel compared to caffeine hydrogel. The flux value of caffeine through rat skin in caffeine-SLN-hydrogel was 3.3 times less than caffeine hydrogel, representing lower systemic absorption. In contrast with caffeine hydrogel, the histological studies showed the complete lysis of adipocytes by administration of caffeine-SLN-hydrogel in the deeper skin layers.

Conclusion: Results of this study indicated that SLNs are promising carrier for improvement of caffeine efficiency in the treatment of cellulite following topical application on the skin.     

Enhanced oral bioavailability of lurasidone by self-nanoemulsifying drug delivery system in fasted state

Objective: The purpose of this work was to develop a new formulation to enhance the bioavailability and reduce the food effect of lurasidone using self-nanoemulsifying drug delivery systems (SNEDDSs).

Methods: The formulation of lurasidone-SNEDDS was selected by the solubility and pseudo-ternary phase diagram studies. The prepared lurasidone-SNEDDS formulations were characterized for self-emulsification time, effect of pH and robustness to dilution, droplet size analysis, zeta potential and in vitro drug release. Lurasidone-SNEDDSs were administered to beagle dogs in fed and fasted state and their pharmacokinetics were compared to commercial available tablet as a control.

Results: The result showed lurasidone-SNEDDS was successfully prepared using Capmul MCM, Tween 80 and glycerol as oil phase, surfactant and co-surfactant, respectively. In vitro drug release studies indicated that the lurasidone-SNEDDS showed improved drug release profiles and the release behavior was not affected by the medium pH with total drug release of over 90% within 5?min. Pharmacokinetic study showed that the AUC_(0–∞) and C_max for lurasidone-SNEDDS are similar in the fasted and fed state, indicating essentially there is no food effect on the drug absorption.

Conclusion: It was concluded that enhanced bioavailability and no food effect of lurasidone had been achieved by using SNEDDS.     

Practical Considerations for Compendial Method Selection

Abstract

The objective of this study was to develop and validate an in vitro test method that can be used as a tool for accessing batch-to-batch uniformity of finished topical products. The studies were performed by utilizing topical creams containing the 13-cis isomer of retinoic acid. Various physicochemical factors which may affect drug release from topical cream formulations were evaluated including drug concentration, internal phase droplet size distribution, viscosity and the composition of the emulsion internal and external phases. Utilizing a modified Franz diffusion cell with a cellulose membrane, the in vitro drug release profile from various cream formulations was established

The effect of varying the concentrations of various key ingredients by 30% does affect the viscosities and release rates compared to a standard formulation. However, there is no correlation between the viscosities and the release rates. No significant differences in pH and droplet size distribution were observed in these cream formulations compared to a standard formulation. The oil phase volume ratio appears to have the largest influence on the in vitro release of the drug. Intra- and inter-batch comparisons of the finished cream products show reproducible release profiles. Based on the results obtained in this study, when used together, both in vitro release and viscosity measurements may be useful as tools to assess batch-to-batch uniformity and consistent manufacturing of the finished cream product