Enhancement of oral bioavailability of fenofibrate by solid self-microemulsifying drug delivery systems

A solid form of self-microemulsifying drug delivery system (Solid SMEDDS) was developed by spray-drying with dextran as the inert solid carrier, to improve the oral bioavailability of a poorly water-soluble drug, fenofibrate. The optimized liquid SMEDDS, composed of Labrafil M 1944 CS/Labrasol/Capryol PGMC (15/75/10%v/v) with 10% w/v fenofibrate gave a z-average diameter of around 240?nm. There was no significant difference in the mean droplet size and size distribution of the emulsions obtained from the liquid and solid forms of SMEDDS. Solid state characterizations of solid SMEDDS showed that the crystal state of fenofibrate in solid SMEDDS was converted from crystalline to amorphous form. Solid SMEDDS had significantly higher dissolution rates than the drug powder, due to its fast self-emulsification in the dissolution media. Furthermore, the AUC value of solid SMEDDS was twofold greater than that of the powder, indicating this formulation greatly improved the oral bioavailability of drug in rats. Thus, these results suggest that solid SMEDDS could be used as an effective oral solid dosage form to improve dissolution and oral bioavailability of fenofibrate.     

Mixed lipid phase SMEDDS as an innovative approach to enhance resveratrol solubility

Context: Despite its promising therapeutic activities, clinical use of resveratrol (RSV) is compromised with unfavorable biopharmaceutical properties, namely low water solubility.

Objective: This work deals with improving RSV solubility and release rate through its incorporation in innovative mixed lipid phase self-microemulsifying drug delivery systems (SMEDDS).

Methods: (Pseudo)ternary diagrams were constructed for different oils and surfactant mixtures. Selected systems were further evaluated for RSV solubility, self-emulsification ability, accelerated stability, dynamic viscosity, compatibility with hard gelatin capsules and in vitro dissolution of RSV.

Results: Lipid phase composed of diverse lipid species, castor oil (long-chained triglyceride) and Capmul MCM (mixture of medium chain mono and diglycerides) allowed formulation of mixed lipid SMEDDS with lower surfactants content (60% Cremophor EL/RH 40/RH?60). Mixed lipid phase SMEDDS showed best self-emulsifying ability with regard to self-emulsifying time as well as droplet size and monodispersity of microemulsions obtained upon SMEDDS dilution with aqueous phase. Overall, incorporation of RSV in SMEDDS resulted in improved solubility (over 23-fold) and dissolution rate compared to crystalline RSV. All SMEDDS formulations were adequately viscous for filling into hard gelatin capsules (>150?mPa?s for empty SMEDDS; >400?mPa?s for RSV-loaded SMEDDS) and no leaking was observed during three months of storage.

Conclusion: The presented work indicates the promising potential of mixed lipid SMEDDS formulations for future development of SMEDDS with lower surfactant content and no added cosolvents for incorporation of RSV and other poorly soluble drugs.     

Preparation and evaluation of valsartan by a novel semi-solid self-microemulsifying delivery system using Gelucire 44/14

The aim of the present study was to develop a novel semi-solid self-microemulsifying drug delivery system (SMEDDS) using Gelucire^® 44/14 as oil with strong solid character to improve the oral bioavailability of poorly soluble drug valsartan. The solubility of valsartan in various excipients was determined, the pseudo-ternary phase diagram was constructed in order to screen the optimal excipients, and DSC analysis was performed to evaluate the melting point of SMEDDS. The optimal drug-loaded SMEDDS formulation was consisted of 30% Gelucire^® 44/14 (oil), 40% Solutol^® HS 15 (surfactant), and 30% Transcutol^® P (cosurfactant) (w/w) with 80?mg valsartan/g excipients. The average droplet sizes of the optimized blank and drug-loaded SMEDDS formulations were 26.20?±?1.43 and 33.34?±?2.15?nm, and the melting points of them were 35.6 and 36.8?°C, respectively. The in vitro dissolution rate of optimal semi-solid SMEDDS was increased compared with commercial capsules, resulting in the 2.72-fold and 2.97-fold enhancement of C_max and AUC_0–t after oral administration in rats, respectively. These results indicated that the novel semi-solid SMEDDS formulation could potentially improve the oral bioavailability of valsartan, and the semi-solid SMEDDS was a desirable system than the traditional liquid SMEDDS because it was convenient for preparation, storage and transportation due to semi-solid state at room temperature and melted state at body temperature.     

Combination of β-cyclodextrin inclusion complex and self-microemulsifying drug delivery system for photostability and enhanced oral bioavailability of methotrexate: novel technique

In the present study, we prepared an inclusion complex of methotrexate (MTX) with β-cyclodextrin (β-CD) in order to decrease its photosensitivity and enhance its aqueous solubility. Then we incorporated this inclusion complex in a self-microemulsifying drug delivery system (SMEDDS) overall to increase its oral bioavailability. The inclusion complex has been prepared by freeze drying method and characterized by differential scanning calorimetry (DSC), ultraviolet (UV), and infrared (IR) spectroscopy assays. The proper molecular ratio of MTX/β-CD was found to be of 1:7, and the water-solubility of MTX was increased in an average of 10-fold. The photostability studies showed that the MTX became stable on exposure to light. Construction of pseudoternary diagrams were investigated to prepare a MTX/β-CD inclusion complex loaded SMEDDS which was characterized by measuring the particle size and the zeta-potential. The optimum formulation of SMEDDS was a system consisting of ethyl oleate, tween 80, and propylene glycol with a mean droplet size of 39.42?nm. In vitro drug release in different pH media showed that the release profile of MTX from the MTX/β-CD loaded SMEDDS was influenced by the pH of the release medium and presented the characteristics of a sustained release profile. Finally, in-vivo studies showed an enhancement of the bioavailability of MTX from the MTX/β-CD loaded SMEDDS form of 1.57-fold. We concluded that the β-CD inclusion complex loaded SMEDDS improved the chemical and physiological properties of MTX and could be a promising means for the delivery of MTX and other unstable and lipophilic drugs by oral route.     

Development of self-microemulsifying drug delivery system for oral delivery of poorly water-soluble nutraceuticals

The objective of the study was to develop a self-microemulsifying drug delivery system (SMEDDS), also known as microemulsion preconcentrate, for oral delivery of five poorly water-soluble nutraceuticals or bioactive agents, namely, vitamin A, vitamin K2, coenzyme Q₁₀, quercetin and trans-resveratrol. The SMEDDS contained a 1:1 mixture (w/w) of Capmul MCM NF (a medium chain monoglyceride) and Captex 355 EP/NF (a medium chain triglyceride) as the hydrophobic lipid and Tween 80 (polysorbate 80) as the hydrophilic surfactant. The lipid and surfactant were mixed at 50:50 w/w ratio. All three of the SMEDDS components have GRAS or safe food additive status. The solubility of nutraceuticals was determined in Capmul MCM, Captex 355, Tween 80, and the SMEDDS (microemulsion preconcentrate mixture). The solubility values of vitamin A palmitate, vitamin K2, coenzyme Q₁₀, quercetin, and trans-resveratrol per g of SMEDDS were, respectively, 500, 12, 8, 56, and 87?mg. Appropriate formulations of nutraceuticals were prepared and filled into hard gelatin capsules. They were then subjected to in vitro dispersion testing using 250?mL of 0.01 N HCl in USP dissolution apparatus II. The dispersion test showed that all SMEDDS containing nutraceuticals dispersed spontaneously to form microemulsions after disintegration of capsule shells with globule size in the range of 25 to 200?nm. From all formulations, except that of vitamin K2, >80–90% nutraceuticals dispersed in 5–10?min and there was no precipitation of compounds during the test period of 120?min. Some variation in dispersion of vitamin K2 was observed due to the nature of the material used (vitamin K2 pre-adsorbed onto calcium phosphate). The present report provides a simple and organic cosolvent-free lipid-based SMEDDS for the oral delivery of poorly water-soluble nutraceuticals. Although a 50:50 w/w mixture of lipid to surfactant was used, the lipid content may be increased to 70:30 without compromising the formation of microemulsion.     

Enhanced oral bioavailability of tacrolimus in rats by self-microemulsifying drug delivery systems

A new self-microemulsifying drug delivery system (SMEDDS) has been developed to increase the solubility, dissolution rate and oral bioavailability of tacrolimus (TAC). The formulations of TAC-SMEDDS were optimized by solubility assay, compatibility tests, and pseudo-ternary phase diagrams analysis. In order to inhibit the efflux of P-glycoprotein (P-gp) for tacrolimus, which is the substrate of P-gp, the excipients which show the inhibition effect to P-gp, such as tocopheryl polyethylene glycol succinate (TPGS) and Cremophor EL40, were chosen in the SMEDDS formulations. According to particle size and the rate of self-emulsification, two optimized formulations were selected: Miglyol 840 as oil phase, Transcutol P as cosurfactant, TPGS as surfactant (TPGS-SMEDDS) or Cremophor EL40 as surfactant (Crem-SMEDDS), respectively. The ratio of oil phase, surfactant and cosurfactant is 1:7.2:1.8. The mean droplet size distribution of the optimized SMEDDS was less than 20?nm. The in vitro dissolution test indicated a significant improvement in release characteristics of TAC. The prepared SMEDDS was compared with the homemade solution by administering the hard capsule to fasted rats. The absorption of TAC from TPGS-SMEDDS and Crem-SMEDDS form resulted in about sevenfold and eightfold increase in bioavailability compared with the homemade solution. Our study illustrated the potential use of SMEDDS for the delivery of hydrophobic compounds, such as TAC by the oral route.     

Preparation and Evaluation of Self-Microemulsifying Drug Delivery System Containing Vinpocetine

The main purpose of current investigation is to prepare a self-microemulsifying drug delivery system (SMEDDS) to enhance the oral bioavailability of vinpocetine, a poorly water-soluble drug. Suitable vehicles were screened by determining the solubility of vinpocetine in them. Certain surfactants were selected according to their emulsifying ability with different oils. Ternary phase diagrams were used to identify the efficient self-microemulsifying region and to screen the effect of surfactant/cosurfactant ratio (K_m). The optimized formulation for in vitro dissolution and bioavailability assessment was oil (ethyl oleate, 15%), surfactant (Solutol HS 15, 50%), and cosurfactant (Transcutol^® P, 35%). The release rate of vinpocetine from SMEDDS was significantly higher than that of the commercial tablet. Pharmacokinetics and bioavailability of SMEDDS were evaluated. It was found that the oral bioavailability of vinpocetine of SMEDDS was 1.72-fold higher as compared with that of the commercial tablet. These results obtained demonstrated that vinpocetine absorption was enhanced significantly by employing SMEDDS. Therefore, SMEDDS might provide an efficient way of improving oral bioavailability of poorly water-soluble drugs.     

Development of a solid self-microemulsifying drug delivery system (SMEDDS) for solubility enhancement of naproxen

Context: Comparative evaluation of liquid and solid self-microemulsifying drug delivery systems (SMEDDS) as promising approaches for solubility enhancement.

Objective: The aim of this work was to develop, characterize, and evaluate a solid SMEDDS prepared via spray-drying of a liquid SMEDDS based on Gelucire® 44/14 to improve the solubility and dissolution rate of naproxen.

Material and methods: Various oils and co-surfactants in combination with Gelucire® 44/14 were evaluated during excipient selection study, solubility testing, and construction of (pseudo)ternary diagrams. The selected system was further evaluated for naproxen solubility, self-microemulsification ability, and in vitro dissolution of naproxen. In addition, its transformation into a solid SMEDDS by spray-drying using maltodextrin as a solid carrier was performed. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to evaluate the physical characteristics of the solid SMEDDS obtained.

Results: The selected formulation of SMEDDS was comprised of Miglyol 812®, Peceol?, Gelucire® 44/14, and Solutol® HS 15. The liquid and solid SMEDDS formed a microemulsion after dilution with comparable average droplet size and exhibited uniform droplet size distribution. In the solid SMEDDS, liquid SMEDDS was adsorbed onto the surface of maltodextrin and formed smooth granular particles with the encapsulated drug predominantly in a dissolved state and partially in an amorphous state. Overall, incorporation of naproxen in SMEDDS, either liquid or solid, resulted in improved solubility and dissolution rate compared to pure naproxen.

Conclusion: This study indicates that a liquid and solid SMEDDS is a strategy for solubility enhancement in the future development of orally delivered dosage forms.     

Self-Microemulsifying Drug Delivery Systems (SMEDDS) for Improving In Vitro Dissolution and Oral Absorption of Pueraria Lobata Isoflavone

The aim of our investigation was to develop and characterize self-microemulsifying drug delivery systems (SMEDDS) of Pueraria lobata isoflavone to improve its in vitro dissolution and oral absorption in beagle dogs. SMEDDS consisted of oil (ethyl oleate), a surfactant (Tween 80), and a cosurfactant (Transcutol P). In all the SMEDDS, the level of Pueraria lobata isoflavone was fixed at 20% w/w of the vehicle. The in vitro self-microemulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. A pseudoternary phase diagram was constructed identifying the efficient self-microemulsification region. From these investigations, an optimized formulation was selected and its dissolution and bioavailability were compared with a tablet formulation in beagle dogs. The in vitro dissolution rate of puerarin from SMEDDS was more than threefold faster than that from Yufengningxin tablets (Pueraria lobata isoflavone tablets). A 2.5-fold increase in the relative bioavailability was observed for the SMEDDS compared with Yufengningxin tablets. The absolute bioavailability of the SMEDDS was 82.32 ± 15.51%, which was significantly improved compared with that of Yufengningxin tablets. These results demonstrate the potential of SMEDDS as an efficient way of improving the oral absorption of Pueraria lobata isoflavone.     

Self-Microemulsifying Drug Delivery Systems (SMEDDS) for Improving In Vitro Dissolution and Oral Absorption of Pueraria Lobata Isoflavone

The aim of our investigation was to develop and characterize self-microemulsifying drug delivery systems (SMEDDS) of Pueraria lobata isoflavone to improve its in vitro dissolution and oral absorption in beagle dogs. SMEDDS consisted of oil (ethyl oleate), a surfactant (Tween 80), and a cosurfactant (Transcutol P). In all the SMEDDS, the level of Pueraria lobata isoflavone was fixed at 20% w/w of the vehicle. The in vitro self-microemulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. A pseudoternary phase diagram was constructed identifying the efficient self-microemulsification region. From these investigations, an optimized formulation was selected and its dissolution and bioavailability were compared with a tablet formulation in beagle dogs. The in vitro dissolution rate of puerarin from SMEDDS was more than threefold faster than that from Yufengningxin tablets (Pueraria lobata isoflavone tablets). A 2.5-fold increase in the relative bioavailability was observed for the SMEDDS compared with Yufengningxin tablets. The absolute bioavailability of the SMEDDS was 82.32 ± 15.51%, which was significantly improved compared with that of Yufengningxin tablets. These results demonstrate the potential of SMEDDS as an efficient way of improving the oral absorption of Pueraria lobata isoflavone.     

Formulation optimization and pharmacokinetics evaluation of oral self-microemulsifying drug delivery system for poorly water soluble drug cinacalcet and no food effect

The present research indicated that a new self-microemulsifying drug delivery systems (SMEDDS) were used to reduce the food effect of poorly water-soluble drug cinacalcet and enhance the bioavailability in beagle dogs by oral gavage. Ethyl oleate, OP-10, and PEG-200 was selected as the oil phase, surfactant and co-surfactant of cinacalcet-SMEDDS by the solubility and phase diagram studies. Central Composite Design-Response Surface Methodology was used to determine the ratio of surfactant and co-surfactant, the amount of oil for optimizing the SMEDDS formation. The prepared formulations were further characterized by the droplet size, self-microemulsifying time, zeta potential, polydispersity index (PDI), and robustness to dilution. The in vitro release profile of cinacalcet-SMEDDS was determined in four different release medium and in fasted state and fed state of simulated gastrointestinal fluid. Cinaclcet-SMEDDS were implemented under fed and fasted state in dogs and product REGPARA^® was used as a comparison to the prepared formulation in the pharmacokinetics. The result showed the components of SMEDDS, the amount of oil, the ratio of surfactant, and co-surfactant was optimized using solubility, pseudo-ternary phase diagram studies, and response surface methodology. In vitro drug release studies indicated that the cinacalcet-SMEDDS eliminated the effect of pH variability in release medium and variational gastroenteric environments with improved drug release performance. Pharmacokinetic studies revealed that the profiles of cinacalcet-SMEDDS were similar both in the fasted and fed state compared with commercial product, indicating the formulation significantly promoted the absorption, enhanced bioavailability and had no food effect essentially. It is concluded that poorly water-soluble drug cinacalcet was improved in the solubility and bioavailability by using a successful oral dosage form the SMEDDS, and eliminated food effect as well.     

Self-microemulsifying drug delivery systems (SMEDDS) for improving in vitro dissolution and oral absorption of Pueraria lobata isoflavone

The aim of our investigation was to develop and characterize self-microemulsifying drug delivery systems (SMEDDS) of Pueraria lobata isoflavone to improve its in vitro dissolution and oral absorption in beagle dogs. SMEDDS consisted of oil (ethyl oleate), a surfactant (Tween 80), and a cosurfactant (Transcutol P). In all the SMEDDS, the level of Pueraria lobata isoflavone was fixed at 20% w/w of the vehicle. The in vitro self-microemulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. A pseudoternary phase diagram was constructed identifying the efficient self-microemulsification region. From these investigations, an optimized formulation was selected and its dissolution and bioavailability were compared with a tablet formulation in beagle dogs. The in vitro dissolution rate of puerarin from SMEDDS was more than threefold faster than that from Yufengningxin tablets (Pueraria lobata isoflavone tablets). A 2.5-fold increase in the relative bioavailability was observed for the SMEDDS compared with Yufengningxin tablets. The absolute bioavailability of the SMEDDS was 82.32 +/- 15.51%, which was significantly improved compared with that of Yufengningxin tablets. These results demonstrate the potential of SMEDDS as an efficient way of improving the oral absorption of Pueraria lobata isoflavone.     

Oral bioavailability enhancement of acyclovir by self-microemulsifying drug delivery systems (SMEDDS)

Acyclovir is a potent anti-viral agent useful in the treatment of Herpes Simplex Virus (HSV) infections. Acyclovir exerts its antiviral activity by competitive inhibition of viral DNA through selective binding of acyclovir to HSV-thymidine kinase. The main purpose of this work was to develop self-microemulsifying drug delivery system (SMEDDS) for oral bioavailability enhancement of acyclovir. Solubility of acyclovir was determined in various vehicles. SMEDDS is mixture of oils, surfactants, and co-surfactants, which are emulsified in aqueous media under conditions of gentle agitation and digestive motility that would be encountered in the gastro-intestinal (GI) tract. Pseudoternary phase diagrams were constructed to identify the efficient self-emulsifying region dilution study was also performed for optimization of formulation. SMEDDS was evaluated for its percentage transmittance, Assay of SMEDDS, phase separation study, droplet size analysis, zeta potential, electrophoretic mobility, and viscosity. The developed SMEDDS formulation contained acyclovir (50 mg), Tween 60 (60%), glycerol (30%) and sunflower oil (9%) was compared with the pure drug solution by oral administrating to male albino rats. The absorption of acyclovir from SMEDDS form resulted about 3.5 fold increase in bioavailability compared with the pure drug solution. Our studies illustrated the potential use of SMEDDS for the delivery of hydrophobic compounds such as acyclovir by oral route.     

Self-microemulsifying smaller molecular volume oil (Capmul MCM) using non-ionic surfactants: a delivery system for poorly water-soluble drug

The main purpose of this work is to formulate self-microemulsifying drug delivery system (SMEDDS) using smaller molecular oil with Atorvastatin calcium as a model drug. Solubility of the selected drug was accessed in oils and surfactants. Percent transmittance (%T) test study was performed to identify the efficient self-microemulsifying formulations. Those formulations which showed higher value for %T were evaluated for droplet size, polydispersity index, ζ potential, refractive index and cloud point measurement. Effect of drug loading on droplet size, increasing dilution in different media, thermodynamic stability and in vitro dissolution was performed to observe the performance of the selected formulation. Further cytotoxicity and permeation enhancement studies were carried out on Caco2 cell lines. Of all the oils accessed for drug solubility, Capmul MCM showed higher solubility capacity for Atorvastatin calcium. Capmul MCM was better microemulsified using combination of Tween 20 and Labrasol surfactant. Droplet size was as low as 86.93?nm with polydispersity index and ζ potential at 0.195?±?0.011 and ?7.27?±?3.11 mV respectively. The selected undiluted formulation showed refractive index values ranging from 1.40 to 1.47 indicating the isotropicity of the formulation. The selected formulation was robust to dilution in different media and thermodynamically stable. Dissolution profile was enhanced for the selected drug as compared to marketed formulation with t85% and DE values at 10?min and 80.15 respectively. Also cytotoxicity measurement showed minimum effect with good permeation enhancing capacity. Thus our study demonstrates the use of smaller molecular oil (Capmul MCM) for developing self-microemulsifying drug delivery system for better in vitro and in vivo performance.     

In situ intestinal permeability and in vivo absorption characteristics of olmesartan medoxomil in self-microemulsifying drug delivery system

To characterize the intestinal absorption behavior of olmesartan medoxomil (OLM) and to evaluate the absorption-improving potential of a self-microemulsifying drug delivery system (SMEDDS), we performed in situ single-pass intestinal perfusion (SPIP) and in vivo pharmacokinetic studies in rats. The SPIP study revealed that OLM is absorbed throughout whole intestinal regions, favoring proximal segments, at drug levels of 10–90 μM. The greatest value for effective permeability coefficient (P_eff) was 11.4?×?10^?6 cm/s in the duodenum (90 μM); the lowest value was 2.9?×?10^?6 cm/s in the ileum (10 μM). A SMEDDS formulation consisting of Capryol 90, Labrasol, and Transcutol, which has a droplet size of 200?nm and self-dispersion time of 21 s, doubled upper intestinal permeability of OLM. The SMEDDS also improved oral bioavailability of OLM in vivo: a 2.7-fold increase in the area under the curve (AUC) with elevated maximum plasma concentration (C_max) and shortened peak time (T_max) compared to an OLM suspension. A strong correlation (r²?=?0.955) was also found between the in situ jejunal P_eff and the in vivo AUC values. Our study illustrates that the SMEDDS formulation holds great potential as an alternative to increased oral absorption of OLM.     

Comparative permeability studies with radioactive and nonradioactive risedronate sodium from self-microemulsifying drug delivery system and solution

The purpose of this work is to prepare a self-microemulsifying drug delivery system (SMEDDS) for risedronate sodium (RSD) and to compare the permeability with RSD solution. The solubility of RSD was determined in different vehicles. Phase diagrams were constructed to determine the optimum concentration of oil, surfactant, and cosurfactant. RSD SMEDDS was prepared by using a mixture of soybean oil, cremophor EL, span 80, and transcutol (2.02:7.72:23.27:61.74, w/w, respectively). The prepared RSD SMEDDS was characterized by droplet size value. In vitro Caco-2 cell permeability studies were performed for SMEDDS and solution of radioactive (^99?mTc-labeled RSD) and nonradioactive RSD. The experimental results indicated that RSD SMEDDS has good stability and its droplet size is between 216.68?±?3.79 and 225.26?±?7.65 during stability time. In addition, RSD SMEDDS has higher permeability value than the RSD solution for both radioactive and nonradioactive experiments. The results illustrated the potential use of SMEDDS for delivery of poorly absorbed RSD.     

Development of self-microemulsifying drug delivery system for oral bioavailability enhancement of berberine hydrochloride

The purpose of this study was to develop a self-microemulsifying drug delivery system (SMEDDS) to improve the oral bioavailability of Berberine hydrochloride (BBH), an important bioactive compound from Chinese Medicines with poor water solubility. Pseudoternary phase diagrams were constructed using oil, surfactant and co-surfactant types to identify the efficient self-microemulsification region. SMEDDS was characterized by morphological observation, droplet size, zeta-potential determination, stability, in vitro release and in vivo bioavailability study. The optimal formulation with the best self-microemulsifying and solubilization ability consisted of 40% (w/w) of ethyl linoleate and oleic acid (2:1), 35% (w/w) Tween-80 and 25% (w/w) glycerol. The SMEDDS of BBH could exhibit good stability. In vitro release test showed a complete release of BBH from SMEDDS was in 5 h. In vivo results indicated that the peak plasma concentration (C_max) and the area under the curve (AUC_{0→12 h}) of SMEDDS of BBH were higher than the commercial tablet by 163.4% and 154.2%, respectively. The relative bioavailability of SMEDDS of BBH was enhanced about 2.42-fold compared with the commercial tablet in rats. The study confirmed that the SMEDDS formulation could be used as a possible alternative to traditional oral formulations of BBH to improve its bioavailability.     

Development of microemulsion of mitotane for improvement of oral bioavailability

Background: Mitotane (o,p′-DDD) is considered to be the drug of choice in the treatment of nonresectable and metastasized adrenocortical carcinoma. However, mitotane has poor solubility in the gastrointestinal tract and very low bioavailability. Consequently, to achieve therapeutic plasma level, high cumulative doses (4–6 g/day) of mitotane were usually used during 3–5 months. To shorten this equilibration time and reduce gastrointestinal side effects, a self-microemulsifying drug delivery system (SMEDDS) of mitotane has been developed. Method: First time, the solubility of mitotane was determined in various oils and surfactants; then, the influence of oils, surfactants, and cosurfactants on the formation of SMEDDS was investigated by constructing ternary phase diagrams. SMEDDS was characterized by morphological observations and droplet size measurements. Intestinal drug permeation of SMEDDS of mitotane (3 mM) was assessed in an Ussing-type apparatus and the bioavailability was determined in a rabbit model. Results: The optimum formulation consisted of a mixture of Capryol®, Tween®, and Cremophor® EL (33:33:33). The formulation was found to pass through the intestinal barrier much faster than a solution of mitotane (14.85 ± 0.8 versus 3.03 ± 0.2 μmol/cm²). Moreover, after oral administration in rabbits, the relative bioavailability was 3.4, compared with that of the conventional form (Lysodren®). Conclusion: This SMEDDS can now be considered as a very good candidate to optimize the administration of mitotane.     

Design and development of a self-microemulsifying drug delivery system of olmesartan medoxomil for enhanced bioavailability

Olmesartan medoxomil (OM) is a hydrophobic antihypertensive drug with low bioavailability (26%) and is known to have adverse effects such as celiac disease and enteropathy. The purpose of this study was to develop SMEDDS to increase bioavailability and decrease potential side effects of OM. Hydrophilic lipophilic balance was calculated by testing solubility of OM in different oils, surfactants, and cosurfactants to obtain the most suitable combination of SMEDDS. Pseudoternary phase diagram was used to select the better oil/water formulation of SMEDDS. After a test for 3-month stability, dissolution tests and parallel artificial membrane permeability assay (PAMPA) were conducted to investigate drug solubility and permeability. Biodistribution of fluorescent marked SMEDDS was observed by using in vivo imaging system. The pharmacodynamics of the drug were determined by measuring blood pressure from tails of rats. At the end of the experiment, intestines were examined for adverse effects of OM. Compared with tablet formulation according to the dissolution study, SMEDDS formulation showed 1.67 times improvement in solubility of OM. PAMPA studies suggested a much faster permeability rate for OM SMEDDS compared to the suspension form. Labeled SMEDDS gave 3.96 times stronger fluorescent emission than control dye administered mice in in vivo imaging system (IVIS^®) studies, indicating an increased bioavailability. Treating effect of SMEDDS was 3.1 times more efficient compared to suspension in hypertensive rats. It caused neither celiac-like enteropathy nor diarrhea, during 21-day noninvasive blood pressure system (NIBP) assay. Our results suggest that SMEEDS formulation improves dissolution and oral bioavailability of OM while reducing its adverse effects.     

Solid self microemulsification of Atorvastatin using hydrophilic carriers: a design

Context: Atorvastatin has a limited advantage to formulate oral dosage forms.

Objective: To enhance the solubility of Atorvastatin and to design the suitable solid self-microemulsifying drug delivery systems (S-SMEDDS)

Materials and methods: The clear and transparent self-microemulsifying drug delivery system (SMEDDS) were formulated using coconut oil and isopropyl myristate as lipid phases; Tween 80 as surfactant; PEG 400 and glycerin as co-surfactant at 2:1, 3:1, 1:2 and 1:3 ratio. The pseudo ternary phase diagrams were constructed to identify the microemulsion region. The SMEDDS were evaluated for zeta potential, poly dispersity index, globule size, pH, viscosity and drug release. The solid SMEDDS were developed by employing adsorption and melt granulation methods. The S-SMEDDS were evaluated for micromeritics, morphology, solid state property, reconstitution ability, drug release and stability.

Results: The micro formulations formed with particle size of 25?nm had shown a 3-folds rise in drug release. The solid SMEDDS had reconstituted to a good microemulsion rapidly in 1–3?min, with a release of 94.62% at the end of 30?min and behaved as immediate releasing capsules. Their shelf-life was found to be 1.3 years.

Discussion: The 1:3 ratio SMEDDS had shown more drug release owing to their less particle size. The solid SMEDDS had shown an increased dissolution profiles than atorvastatin. The solid state of the drug had changed in formulation inferring their enhanced solubility.

Conclusion: The solid form of atorvastatin liquid SMEDDS had been formulated successfully with enhanced shelf life and solubility.