Study of a novel disintegrable oleanolic acid-polyvinylpolypyrrolidone solid dispersion

Novel solid dispersions of oleanolic acid-polyvinylpolypyrrolidone (OLA-PVPP SDs) were designed and prepared to improve the apparent solubility of drug, as well as to improve the stability, fluidity and compressibility of SDs. Disintegrable OLA-PVPP SDs were then evaluated both in vitro and in vivo. DSC, XRD, IR and SEM analysis proved the formation of OLA-PVPP SD and its amorphous state. The results of fluidity study, moisture absorption test and stability test showed that OLA-PVPP SD with good fluidity and qualified stability was successfully obtained. Meanwhile excellent dissolution rate was achieved for in vitro studies; dissolution test showed that ～50–75% of OLA was dissolved from SDs within the first 10?min, which is about 10–15 times of free OLA. In vivo study indicated that the formation of solid dispersion could largely improve the absorption of OLA, resulting in a much shorter T_max (p?C_max (p?0→∞ of OLA-PVPP SDs (1:6) were 155.4?±?37.24?h·ng/mL compared to the 103.11?±?26.69?h·ng/mL and 94.92?±?13.05?h·ng/mL of OLA-PVPP physical mixture (1:6) and free OLA, respectively. These proved PVPP could be a promising carrier of solid dispersions and was industrially feasible alternative carrier in the manufacture of solid dispersions.     

Preparation,characterization and in vitro and in vivo evaluation of a solid dispersion of Naringin

Naringin (NA) is one of typical flavanone glycosides widely distributed in nature and possesses several biological activities including antioxidant, anti-inflammatory, and antiapoptotic. The aim of this study was to develop solid dispersion (SD) and to improve the dissolution rate and oral bioavailability of NA. NA–SD was prepared by the traditional preparation methods using PEG6000, F68, or PVP K30 as carrier at different drug to carrier ratios. According to the results of solubility and in vitro dissolution test, the NA–PEG6000 (1:3) SD was considered as an optimal formulation to characterize by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry and powder X-ray diffraction. Furthermore, oral bioavailabilities of NA–PEG6000 (1:3) SD and NA–suspension with the same dosage were investigated in SD rats. The results confirmed the formation of SD and the pharmacokinetic parameters of NA–PEG6000 (1:3) SD (C_max?=?0.645?±?0.262?µg/ml, AUC_0–t?=?0.471?±?0.084?µg/ml?h) were higher than that of NA–suspension (C_max?=?0.328?±?0.183?µg/ml, AUC_0–t =?0.361?±?0.093?µg/ml?h). Based on the results, the SD is considered as a promising approach to enhance the dissolution rate and oral bioavailability of NA.     

An in vitro and in vivo investigation into the suitability of compression coated tablets of indomethacin for the treatment of rheumatoid arthritis which follow circadian rhythms

Objective: The aim of this study was to develop chronotherapeutic drug delivery system of indomethacin using polyethylene oxide (PEO) with a predetermined lag time of 6 h by compression coating technique.

Materials and methods: Solid dispersions (SD) of indomethacin were prepared using novel carrier sucrose fatty acid ester (SFE 1815) to increase the in vitro dissolution. The optimized SD was formulated as immediate release core tablet which were further coated with PEO (WSR Coagulant or WSR N12 K) using compression coating technique. Compression coated tablets formulated with PEO WSR Coagulant in 1:1.7 ratio of core tablet weight and coating polymer was considered as optimized formulation, which was further characterized by differential scanning calorimetry, X-ray diffractometry, Fourier transformed infrared spectroscopy, and scanning electron microscopy.

Results: The results indicated that there was no chemical incompatibility and slight change in surface properties. C_max, area under the curve (AUC_0-t), and T_max following oral ingestion of commercial capsule (Indocap) and optimized formulation (CT 4) were found to be 1973.18 ± 36.89 ng/mL, 11090.09 ± 131.21 ng/mL/h, 0.99 ± 0.02 h and 2115.46 ±6 2.61, 10413.14 ± 299.66 ng/mL/h, 7.00±0.02 h, respectively.

Conclusion: Unaltered AUC_0-t and C_max, but delayed T_max indicated clear lag time before immediate release of drug which is suitable for treating rheumatoid arthritis following circadian rhythm.     

Effect of semicrystalline polymers on self-emulsifying solid dispersions of nateglinide: in vitro and in vivo evaluation

This study was undertaken to improve solubility and bioavailability of nateglinide by preparation of stable self-emulsifying solid dispersions (SESDs). The influence of semicrystalline polymers (poloxamer 407, gelucire 50/13) and method of preparation on dissolution behavior, in vivo performance and stability of nateglinide SESDs were investigated. After optimization, SESDs were prepared at 1:5 weight ratio of nateglinide and polymer individually. All the SESDs were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. Aqueous solubility of nateglinide was enhanced by 91.82-fold. The SESDs (poloxamer 407-based solid dispersions) achieved rapid and complete drug release (～100% within 45?min) at pH 2. The improved dissolution appeared to be well correlated with the enhanced bioavailability of nateglinide in rabbits. After oral administration of SESDs (poloxamer 407-based solid dispersions), C_max and AUC of nateglinide were increased by ～2.92 and 1.77-folds, respectively, signifying the effectiveness of solid dispersions to improve the bioavailability of nateglinide. Stability during storage was established to show prevention of recrystallization. In conclusion, SESDs with poloxamer 407 in solvent method appeared to be an economic and promising technique to improve the dissolution, bioavailability, and stability of nateglinide.     

Development and uniform evaluation of ropinirole osmotic pump tablets with REQUIP XL both in vitro and in beagle dogs

REQUIP XL, prolonged release formulation of ropinirole hydrochloride (RH) in market, could release ropinirole constantly and showed satisfactory therapeutic effect and good compliance. REQUIP XL was composed of more than 10 kinds of excipients and prepared by Geomatrix technology, which was complex and laborious. The purpose of this study was to obtain a dosage form of RH with similar in vitro release profile and bioequivalence in vivo compared to REQUIP XL. Osmotic pump tablet combined with fast release phase was selected as the delivery system of RH and similar release curves were obtained in different media. The tablets were also administered to beagle dogs and the pharmacokinetic parameters were calculated using a non-compartmental model. C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 24?h (AUC_0–24) were 3.97?±?0.53?ng/mL, 3.58?±?0.49?h, 8.29?±?0.93?h, and 35.20?±?8.11?ng/mL???h for ropinirole osmotic pump tablets (ROPT) and 4.15?±?1.07?ng/mL, 2.92?±?0.49?h, 7.84?±?1.09?h, and 34.34?±?10.06?ng/mL???h for REQUIP XL. The log-transformed mean C_max and AUC_0–24 of ROPT were about 92.15% and 102.49% relative to that of REQUIP XL, respectively. The 90% confidence intervals of C_max and AUC_0–24 for ROPT were 75.69–115.31% and 88.89–122.30%, respectively. So it could be concluded that ROPT was uniform with REQUIP XL both in vitro and in beagles and the release profiles of Geomatrix technology may be obtained by osmotic pump combined with fast release technology.     

A pH-independent instantaneous release of flurbiprofen: a study of the preparation of complexes,their characterization and in vitro/in vivo evaluation

In this study, furbiprofen/hydroxypropyl-β-cyclodextrin (HPβCD) inclusion complexes were prepared to improve the drug dissolution and facilitate its application in hydrophilic gels. Inclusion complexes were prepared using a supercritical fluid processing and a conventional optimized co-lypholization method was employed as a reference. The entrapment efficacy and drug loading of both methods were investigated. Evaluation of drug dissolution enhancement was conducted in deionized water as well as buffer solutions of different pH. Carbopol 940 gels of both flurbiprofen and flurbiprofen/HPβCD inclusion complexes, with or without penetration enhancers, were prepared and percutaneous permeation studies were performed using rat abdominal skin samples. Formation of flurbiprofen/HPβCD inclusion complexes was confirmed by Fourier transform-infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. The results obtained showed that SCF processing produced a higher EE (81.91?±?1.54%) and DL (6.96?±?0.17%) compared with OCL with values of 69.11?±?2.23% and 4.00?±?1.01%, respectively. A marked instantaneous release of flurbiprofen/HPβCD inclusion complexes prepared by SCF processing (103.04?±?2.66% cumulative release within 5?min, a 10-fold increase in comparison with flurbiprofen alone) was observed. In addition, this improvement in dissolution was shown to be pH-independent (the percentage cumulative release at pH 1.2, 4.5, 6.8 and 7.4 at 5?min was 95.19?±?1.71, 101.75?±?1.44, 105.37?±?4.58 and 96.84?±?0.56, respectively). Percutaneous permeability of flurbiprofen-in-HPβCD-in-gels could be significantly accelerated by turpentine oil and was related to the water content in the system. An in vivo pharmacokinetic study showed a 2-fold increase in C_max and a shortened T_max as well as a comparable relative bioavailability when compared with the commercial flurbiprofen Cataplasms (Zepolas^®). With their superior dissolution, these flurbiprofen/HPβCD inclusion complexes prepared by SCF processing could provide improved applications for flurbiprofen.     

Dual-purpose vardenafil hydrochloride/dapoxetine hydrochloride orodispersible tablets: in vitro formulation/evaluation,stability study and in vivo comparative pharmacokinetic study in healthy human subjects

Erectile dysfunction (ED) is the most important disorder after premature ejaculation for sexual activity in men. Vardenafil hydrochloride (VH) is an oral therapy for the treatment of erectile dysfunction. VH oral disintegrating tablets (ODTs) have been prepared by freeze drying technique to improve its dissolution profile and the overall clinical performance. Dapoxetine hydrochloride (DH) was added to the best three formulae of the prepared VH ODTs to treat premature ejaculation. All the ODTs formulae were evaluated for weight variation, friability, drug content, in vitro disintegration time, wetting time, and the dissolution study. Gelatin as a matrix former with N-methylpyrrolidone as a solubilizer in VH/DH ODTs improved the dissolution rate and extent of release of VH and DH with 100% of drug being dissolved after 15?min. In vivo study results from six healthy male volunteers showed shorter T_max of VH from VH/DH ODT of 0.583?±?0.129?h and shorter T_max of DH from VH/DH ODT of 0.625?±?0.137?h and showed AUC_0–12 of VH from VH/DH ODT of 39.234?±?10.932?ng/ml^?h¹ and AUC_0–12 of DH from VH/DH ODT of 531.681?±?129.544?ng/ml^?h¹, with relative bioavailability values of 100.9 and 85%, respectively, compared to (Levitra^®) and (Priligy^®).     

Development and evaluation of orally disintegrating tablets of cilostazol-β-cyclodextrin inclusion complexes

Context: The clinical applications of cilostazol (CLZ) are limited by its low aqueous solubility (<5?µg/ml) and high biovariability.

Objective: The aim of this study was to enhance the solubility of CLZ by forming inclusion complexes (ICs) with beta cyclodextrin (β-CD) and formulating them into oral disintegrating tablets.

Methods: Phase solubility study of CLZ with β-CD was performed in water. Job’s plot was constructed to determine the stoichiometry of ICs. ICs, prepared by spray-drying technique, were characterized using Fourier transform infrared spectroscopy, differential scanning calorimetry, hot stage microscopy, powder X-ray diffraction and nuclear magnetic resonance. Molecular modeling studies were performed to understand the mode of interaction of CLZ with β-CD. The formulation process was undertaken using a reproducible design of experiment generated model, attained by variation of diluents and disintegrants at three levels. Tablets were evaluated for drug content, hardness, friability, disintegration time (DT), wetting time (WT) and dissolution profiles.

Results and discussion: Phase solubility studies suggested an A_L type curve with stability constant (K_s) of 922.52?M^?1. Job’s plot revealed 1:2 stoichiometry. All analytical techniques confirmed inclusion complexation. Molecular modeling revealed dispersive van der Waals interaction energy as a major contributor for stabilization of complex. The spray-dried complexes showed higher solubility and faster dissolution compared to plain CLZ. The optimized formulation showed DT of 11.1?±?0.8?s, WT of 8.7?±?0.9?s and almost complete dissolution of CLZ in 15?min.

Conclusion: The prepared tablets with low DT and fast dissolution will prove to be a promising drug delivery system with improved bioavailability and better patient compliance.     

Enhancement of oral bioavailability of anti-HIV drug rilpivirine HCl through nanosponge formulation*

Objective: To synthesize β cyclodextrin nanosponges using a novel and efficient microwave mediated method for enhancing bioavailability of Rilpivirine HCl (RLP).

Significance: Belonging to BCS class II RLP has pH dependent solubility and poor oral bioavailability. However, a fatty meal enhances its absorption hence the therapy indicates that the dosage form be consumed with a meal. But then it becomes tedious and inconvenient to continue the therapy for years with having to face the associated gastric side effects such as nausea.

Method: Microwave synthesizer was used to mediate the poly-condensation reaction between β-cyclodextrin and cross-linker diphenylcarbonate. Critical parameters selected were polymer to cross-linker ratio, Watt power, reaction time and solvent volume. Characterization studies were performed using FTIR, DSC, SEM, ¹H-NMR and PXRD. Molecular modeling was applied to confirm the possibility of drug entrapment. In vitro drug dissolution followed by oral bioavailability studies was performed in Sprawley rats. Samples were analyzed using HPLC.

Results: Microwave synthesis yields para-crystalline, porous nanosponges (～205?nm). Drug entrapment led to enhancement of solubility and a two-fold increase in drug dissolution (P?C_max and AUC_0-∞ increases significantly (C_max of NS～ 586?±?5.91?ng/mL; plain RLP ～310?±?5. 74?ng/mL).

Conclusion: The approach offers a comfortable dosing zone for AIDs patients, negating the requirement of consuming the formulation in a fed state due to enhancement in drugs’ oral bioavailability.     

Improved dissolution rate and bioavailability of fenofibrate pellets prepared by wet-milled-drug layering

Objective: The objective of this study is to investigate the wet-milled-drug layering process which could significantly improve the dissolution rate and oral bioavailability of fenofibrate pellets.

Methods: Fenofibrate was milled with HPMC-E5 to prepare a uniform suspension in the micrometer and nanometer range, and this suspension was then layered on to sugar spheres to form the pellets (F1, F2).

Results: The particle size was significantly reduced (from 1000 µm to 1–10 µm and 400?nm) but the fenofibrate in suspension retained its crystallinity from the results of DSC and PXRD investigations. The dissolution rate of F1-F2 and Antara® capsules was 55.47 %, 61.27 % and 58.43 %, respectively, in 0.01?mol/L SDS solution over 60?min. In addition, F1, F2, and Antara® capsules were given orally to 6 beagle dogs to determine the bioavailability. The C_max of F1, F2 (8.21?±?2.55 and 9.33?±?2.37 μg/mL)and the AUC_(0?t) of F1, F2 (152.46?±?78.89 and 172.17?±?67.58 μg/mL·h)were higher than those of Antara® (6.02?±?3.34 μg/mL and 89.82?±?46.46 μg/mL·h) and, F1, F2 reached their C_max earlier than Antara® (F1: 2.0?±?1.1?h; F2: 1.8?±?1.2?h; Antara®: 6.0?±?8.9?h).

Conclusion: These results show that the wet-milled-drug layering technique is a powerful method to improve the dissolution rate and the bioavailability of fenofibrate.     

Oral bioavailability and intestinal absorption of candesartan cilexetil: role of naringin as P-glycoprotein inhibitor

Objective: The aim of the study is to explore the pharmacokinetic behavior of candesartan solid dispersions prepared by different pharmaceutical interventions using P-gp inhibitor in rabbits to validate the effectiveness of naringin as a pharmaceutical excipient in enhancing the oral delivery of lipophilic candesartan cilexetil.

Methods: Male albino rabbits (1–1.5?kg) were orally administered pure CAN suspensions and various candesartan solid dispersions (10?mg/kg) with and without naringin (15?mg/kg) and blood samples were collected at specified time points. CAN plasma samples were measured using HPLC.

Key findings: After oral dosing of pure CAN suspension, the mean AUC0-8?h was found to be 0.14?±?0.09?μgh/ml which was increased significantly, i.e. 0.52?±?0.13?μgh/ml with freeze-dried solid dispersions in the presence of naringin (p?p?Conclusion: These results are quite stimulating for further development of a clinically useful oral formulation of candesartan cilexetil based on P-gp inhibition using naringin, a natural flavonoid as a pharmaceutical excipient.     

Bioavailability of oral methylnaltrexone increases with a phosphatidylcholine-based formulation

Objective: Methylnaltrexone (MNTX), a peripherally restricted opioid antagonist with mu-opioid receptor selectivity, can reduce opioid activity in the gastrointestinal tract while sparing the pain relief afforded by opioids. Since the bioavailability of oral MNTX is low, it is necessary to explore the oral formulations of MNTX that increase its bioavailability.

Materials and methods: An MNTX-phosphatidylcholine complex (MNTX-PC) formulation was prepared. The physicochemical properties of MNTX-PC were analyzed, and its bioavailability was evaluated in rats. After 250?mg/kg of oral MNTX-PC, plasma samples were collected up to 9?h. The concentrations of the compound in rat plasma were quantified using LC/MS/MS.

Results: Two MNTX plasma concentration peaks were observed at 120 and 180?min for the MNTX-PC group and control (MNTX in a water solution). T_max was 180?min, C_max was 1083.7?±?293.9?ng/mL, and T_1/2 was 496?min for the MNTX-PC group. For control, T_max was 180?min, C_max was 448.4?±?126.0?ng/mL, and T_1/2 was 259?min. The AUC_{0–540 min} for the MNTX-PC group was 5758.2?±?1474.2?ngh/mL; for control, 1405.9?±?447.8?ngh/mL. Thus, the relative bioavailability after the oral administration of MNTX-PC was 410% compared to that of control.

Conclusion: MNTX-PC formulation significantly enhanced the oral bioavailability of MNTX.     

Clinical pharmacokinetic study for the effect of glimepiride matrix tablets developed by quality by design concept

Objective: Implementation of a new pharmaceutical technique to improve aqueous solubility and thus dissolution, enhancement of drug permeation, and finally formulation of a controlled release tablet loaded with glimepiride (GLMP).

Significance: Improve GLMP bioavailability and pharmacokinetics in type II diabetic patients.

Methods: Different polymers were used to enhance aqueous GLMP solubility of which a saturated polymeric drug solution was prepared and physically adsorbed onto silica. An experimental design was employed to optimize the formulation parameters affecting the preparation of GLMP matrix tablets. A compatibility study was conducted to study components interactions. Scanning electron microscope (SEM) was performed before and after the tablets were placed in the dissolution medium. An in vivo study in human volunteers was performed with the optimized GLMP tablets, which were compared to pure and marketed drug products.

Results: Enhancement of GLMP aqueous solubility, using the polymeric drug solution technique, by more than 6–7 times when compared with the binary system. All the studied formulation factors significantly affected the studied variables. No significant interaction was detected among components. SEM illustrated the surface and inner tablet structure, and confirmed the drug release which was attributed to diffusion mechanism. The volunteer group administered the optimized GLMP tablet exhibited higher drug plasma concentration (147.4?ng/mL), longer time to reach maximum plasma concentration (4?h) and longer t_1/2 (7.236?h) compared to other groups.

Conclusions: Matrix tablet loaded with a physically modified drug form could represent a key solution for drugs with inconsistent dissolution and absorption profiles.     

Effect of semicrystalline copolymers in solid dispersions of pioglitazone hydrochloride: in vitro-in vivo correlation

Objective: The study was aimed to improve the dissolution and bioavailability of developed stable amorphous solid dispersions (SDs) of pioglitazone hydrochloride (PGH), a poorly water-soluble drug.

Significance: Poor aqueous solubility of PGH was overcome by the design of SDs. Level A correlation demonstrated between in vitro release and bioavailability of PGH, suggest its biowaiver potential.

Methods: The effects of semicrystalline copolymers (poloxamer 407 and gelucire 50/13) and methods of preparations on dissolution behavior, in vivo performance, and stability of PGH SDs were investigated. All the SDs were characterized by FTIR, TGA, DSC, XRD, and SEM.

Results: FTIR and TGA showed the compatibility with the polymers. The significant change in melting pattern of the PGH observed in the DSC thermograms supported by XRD patterns & SEM indicated a change from a crystalline to an amorphous state. Gelucire 50/13 was observed to have greater ability to form SDs than poloxamer 407 in solvent evaporation method (SM). Prevention of recrystallization during storage suggested stability of the formulation. Gelucire 50/13 based SD, prepared by SM remarkably increased the dissolution within 15?min (87.27?±?2.25%) and was supported by dissolution parameters (Q₁₅, IDR, RDR, % DE, f₁, f₂). These SDs showed pH-dependent solubility. In vivo test showed significantly (p?<?.05) higher AUC_0–t and C_max, which were about 3.17 and 4.34 times that of the pure drug respectively.

Conclusion: Gelucire 50/13 was found to be a suitable carrier for SM for preparation of SDs of PGH as evident from increased dissolution and bioavailability.     

Preformulation Studies on Solid Dispersions Containing Triamterene or Temazepam in Polyethylene Glycols or Gelucire 44/14 for Liquid Filling of Hard Gelatin Capsules

Abstract

Solid dispersions of triamterene or temazepam in polyethylene glycols or gelucire 44/14 have been investigated. The phase equilibria of the drugs and carriers were determined by Differential Thermal Analysis and Hot Stage Microscopy. Particle Size Analysis was carried out using double image microscopy, whilst phase solubility techniques and dissolution methods were used to study solubility, dissolution and ageing.

It has been shown that triamterene forms monotectics with polyethylene glycols and gelucire 44/14 and temzepam shows partial solubility. The effect of the carriers on particle size depends on the solubility of the drug in the carrier and size reduction is observed where the drug is soluble in the carrier.     

Preformulation characterization and in vivo absorption in beagle dogs of JFD,a novel anti-obesity drug for oral delivery

JFD (N-isoleucyl-4-methyl-1,1-cyclopropyl-1-(4-chlorine)phenyl-2-amylamine·HCl) is a novel investigational anti-obesity drug without obvious cardiotoxicity. The objective of this study was to characterize the key physicochemical properties of JFD, including solution-state characterization (ionization constant, partition coefficient, aqueous and pH-solubility profile), solid-state characterization (particle size, thermal analysis, crystallinity and hygroscopicity) and drug-excipient chemical compatibility. A supporting in vivo absorption study was also carried out in beagle dogs. JFD bulk powders are prismatic crystals with a low degree of crystallinity, particle sizes of which are within 2–10?μm. JFD is highly hygroscopic, easily deliquesces to an amorphous glass solid and changes subsequently to another crystal form under an elevated moisture/temperature condition. Similar physical instability was also observed in real-time CheqSol solubility assay. pK_a (7.49?±?0.01), log?P (5.10?±?0.02) and intrinsic solubility (S₀) (1.75?μg/ml) at 37?°C of JFD were obtained using potentiometric titration method. Based on these solution-state properties, JFD was estimated to be classified as BCS II, thus its dissolution rate may be an absorption-limiting step. Moreover, JFD was more chemically compatible with dibasic calcium phosphate, mannitol, hypromellose and colloidal silicon dioxide than with lactose and magnesium stearate. Further, JFD exhibited an acceptable pharmacokinetic profiling in beagle dogs and the pharmacokinetic parameters T_max, C_max, AUC_0–t and absolute bioavailability were 1.60?±?0.81?h, 0.78?±?0.47?μg/ml, 3.77?±?1.85?μg·h/ml and 52.30?±?19.39%, respectively. The preformulation characterization provides valuable information for further development of oral administration of JFD.     

In vitro and in vivo effects of morin on the intestinal absorption and pharmacokinetics of olmesartan medoxomil solid dispersions

Abstract

Purpose: In-situ evaluation to corroborate morin effects on the intestinal absorption and pharmacokinetic behavior of freeze-dried OLM-loaded solid dispersions with Caco-2 and in-vivo studies

Methods: Intestinal transport and absorption studies were examined by Caco-2 permeability, in-situ single pass perfusion and closed-loop models along with in-vivo pharmacokinetic studies to evaluate and confirm the effect of P-gp-mediated activity of morin. We evaluated the intestinal membrane damage in the presence of morin by measuring the release of protein and lactate dehydrogenase (LDH) followed by using qualitative and quantitative morphometric analysis to describe the surface characteristics of intestinal epithelium.

Results: Morin showed the highest P_eff value 13.8?±?0.34?×?10^?6?cm/s in jejunum than ileum (p?<?.01) at 100?µM with absorption enhancement of 1.31-fold together with enhanced (p?<?.01) secretory transport of 6.27?±?0.27?×?10?^?6?cm/s in Caco-2 monolayer cells. Our findings noticed 2.37 (in-situ); 2.39 (in-vivo) and 1.43 (in-situ); 1.36 (in-vivo) fold increase in AUC_0–t with elevated C_max and shortened T_max for freeze-dried solid dispersion in the presence of morin as compared to pure OLM and freeze-dried solid dispersions without morin, respectively.

Conclusions: Our study demonstrated that increased solubilization through freeze-dried OLM-loaded solid dispersion together with efflux inhibition improved intestinal permeability to one system that might lead to novel solubilization and efflux pump inhibition as a novel alternative potential to increase oral absorption and bioavailability of OLM.     

Sustained-release of Cyclosporin A pellets: preparation,in vitro release,pharmacokinetic studies and in vitro–in vivo correlation in beagle dogs

The aim of this study was to develop Cyclosporin A (CsA) sustained-release pellets which could maintain CsA blood concentration within the therapeutic window throughout dosing interval and to investigate the in vitro–in vivo correlation (IVIVC) in beagle dogs. The CsA sustained-release pellets (CsA pellets) were prepared by a double coating method and characterized in vitro as well as in vivo. Consequently, the CsA pellets obtained were spherical in shape, with a desirable drug loading (7.18?±?0.17?g/100?g), good stability and showed a sustained-release effect. The C_max, T_max and AUC_0–24 of CsA pellets from the in vivo pharmacokinetics evaluation was 268.22?±?15.99?ng/ml, 6?±?0?h and 3205.00?±?149.55?ng·h/ml, respectively. Compared with Neoral®, CsA pellets significantly prolonged the duration of action, reduced the peak blood concentration and could maintain a relatively high concentration level till 24?h. The relative bioavailability of CsA pellets was 125.68?±?5.37% that of Neoral®. Moreover, there was a good correlation between the in vitro dissolution and in vivo absorption of the pellets. In conclusion, CsA pellets which could ensure a constant systemic blood concentration within the therapeutic window for 24?h were prepared successfully. Meanwhile, this formulation possessed a good IVIVC.     

Average Bioequivalence of Clarithromycin Immediate Released Tablet Formulations in Healthy Male Volunteers

Abstract

The objective of this study was to assess average bioequivalence of two immediate released tablet formulations of 500-mg clarithromycin tablets in 24 healthy Thai male volunteers. In a randomized, single dose, fasting state, two-period, crossover study design with a 1-week washout period, each subject received a 500-mg clarithromycin tablet. Plasma samples were collected over a 24-hour period after oral administration and were analyzed by using a validated method using high performance liquid chromatography with electrochemical detection. Pharmacokinetic parameters were determined by using noncompartmental analysis. The time to reach the maximal concentration (t_max, h), the peak concentration (C_max, ng/mL), and the area under the curve (AUC_{0 ? ∞}, ng.h/mL) of the Reference and Test formulations were 2.0 ± 0.8 vs. 2.2 ± 0.9, 2793 ± 1338 vs. 2642 ± 1344, and 17912 ± 7360 vs. 17660 ± 7992, respectively. Relative bioavailability was 0.99. The 90% confidence interval of C_max and AUC_{0 ? ∞} were 82.6–112.1% and 84.7–112.0%. Bioequivalence between the Test and Reference formulation can be concluded.     

Prediction of in vivo plasma concentration–time profile from in vitro release data of designed formulations of milnacipran using numerical convolution method

The aim of this study was to predict the in vivo plasma drug level of milnacipran (MIL) from in vitro dissolution data of immediate release (IR 50?mg and IR 100?mg) and matrix based controlled release (CR 100?mg) formulations. Plasma drug concentrations of these formulations were predicted by numerical convolution method. The convolution method uses in vitro dissolution data to derive plasma drug levels using reported pharmacokinetic (PK) parameters of a test product. The bioavailability parameters (C_max and AUC) predicted from convolution method were found to be 106.90?ng/mL, 1138.96?ng/mL?h for IR 50?mg and 209.80?ng/mL, 2280.61?ng/mL?h for IR 100?mg which are similar to those reported in the literature. The calculated PK parameters were validated with percentage predication error (% PE). The % PE values for C_max and AUC were found to be 7.04 and ?7.35 for IR 50?mg and 11.10 and ?8.21 for IR 100?mg formulations. The C_max, T_max, and AUC for CR 100?mg were found to be 120?ng/mL, 10?h and 2112.60?ng/mL?h, respectively. Predicted plasma profile of designed CR formulation compared with IR formulations which indicated that CR formulation can prolong the plasma concentration of MIL for 24?h. Thus, this convolution method is very useful for designing and selection of formulation before animal and human studies.