Anti-hyperuricemic property of 6-shogaol via self-micro emulsifying drug delivery system in model rats: formulation design,in vitro and in vivo evaluation

The prevalence of hyperuricemia is relatively high worldwide, and a great number of patients are suffering from its complications. 6-shogaol, an alkylphenol compound purified from the root of ginger (Zingiber officinale Roscoe), has been proved to possess diverse pharmacological activities. However, its poor aqueous solubility usually leads to low bioavailability, and further clinical applications will be greatly discounted. The current study aimed to formulate a 6-shogaol-loaded-Self Microemulsifying Drug Delivery System (SMEDDS) to amend low aqueous solubility and bioavailability orally, as well as, potentiate the hyperuricemic activity of the 6-shogaol. SMEDDS was developed with central composite design established on a two system components viz., 18.62% W/W ethyl oleate (oil phase) and ratio of tween 80 (surfactant) to PEG 400 (co-surfactant) (1.73:1, W/W). Based on quadratic model, the navigation of the design space could generate spherically-shaped and homogenous droplets with respective mean particle diameter, polydispersity and of 20.00?±?0.26?nm and 0.18?±?0.02. The 6-shogaol-SMEDDS showed significant elevation of cumulative release compared with the free 6-shogaol and more importantly a 571.18% increment in the relative oral bioavailability of the drug. The predominant accumulation of 6-shogaol-SMEDDS in the liver suggested hepatic-targeting potentiality of the drug. Oral administration of 6-shogaol-SMEDDS in hyperuricemic rats also significantly decreased uric acid level and xanthine oxidase activity. Histological studies confirmed formulation groups indeed could provide better protection of kidney than free drug groups. Collectively, these findings indicated that the SMEDDS hold much promise in enhancing the oral delivery and therapeutic efficacy of 6-shogaol.     

Development of phyllanthin-loaded self-microemulsifying drug delivery system for oral bioavailability enhancement

Phyllanthin, a poorly water-soluble herbal active component from Phyllanthus amarus, exhibited a low oral bioavailability. This study aims at formulating self-microemulsifying drug delivery systems (SMEDDS) containing phyllanthin and evaluating their in-vitro and in-vivo performances. Excipient screening was carried out to select oil, surfactant and co-surfactant. Formulation development was based on pseudo-ternary phase diagrams and characteristics of resultant microemulsions. Influences of dilution, pH of media and phyllanthin content on droplet size of the resultant emulsions were studied. The optimized phyllanthin-loaded SMEDDS formulation (phy-SMEDDS) and the resultant microemulsions were characterized by viscosity, self-emulsification performance, stability, morphology, droplet size, polydispersity index and zeta potential. In-vitro dissolution and oral bioavailability in rats of phy-SMEDDS were studied and compared with those of plain phyllanthin. Phy-SMEDDS consisted of phyllanthin/Capryol 90/Cremophor RH 40/Transcutol P (1.38:39.45:44.38:14.79) in % w/w. Phy-SMEDDS could be emulsified completely within 6?min and formed fine microemulsions, with average droplet range of 27–42?nm. Phy-SMEDDS was robust to dilution and pH of dilution media while the resultant emulsion showed no phase separation or drug precipitation after 8?h dilution. The release of phyllanthin from phy-SMEDDS capsule was significantly faster than that of plain phyllanthin capsule irrespective of pH of dissolution media. Phy-SMEDDS was found to be stable for at least 6 months under accelerated condition. Oral absorption of phyllanthin in rats was significantly enhanced by SMEDDS as compared with plain phyllanthin. Our study indicated that SMEDDS for oral delivery of phyllanthin could be an option to enhance its bioavailability.     

Development and in vitro evaluation of alginate gel-encapsulated, chitosan-coated ceramic nanocores for oral delivery of enzyme

The successful administration of protein and peptide drugs by oral route maintaining their active conformation remains a key challenge in the field of pharmaceutical technology. In the present study, we propose the use of a nanosize ceramic core-based system for effective oral delivery of acid-labile model enzyme, serratiopeptidase (STP). Ceramic core was prepared by colloidal precipitation and sonication of disodium hydrogen phosphate solution and calcium chloride solution at room temperature. The core was coated with chitosan under constant stirring and Fourier-Transform Infra Red Spectroscopy (FTIR) confirmed phosphoric groups of calcium phosphate linked with ammonium groups of chitosan in the nanoparticles; then the enzyme was adsorbed over the preformed nanocore. Protein-loaded nanocore was further encapsulated into alginate gel for enzyme protection. Prepared system was characterized for size, shape, loading efficiency, and in vitro release profile (pH 1.2 and pH 7.4). The effect of processing variables on the size of the core was evaluated to form small, uniform, and discrete nanocores. Stability and integrity of enzyme during processing steps was assessed by in vitro proteolytic activity. The prepared system was examined to be spherical in shape with diameter 925 ± 6.81 nm using TEM. The in vitro release data followed the Higuchi model, showing a low amount (26% ± 2.4%) of diffusion-controlled drug release (R² = 0.9429) in acidic buffer up to a period of 2 to 6 hours, signifying the integrity of alginate gel in acid. In the alkaline medium sustained and nearly complete first order release of protein was observed up to a 6 hours. It is inferred that the protein-loaded ceramic core acts as a reservoir of the adsorbed enzyme and alginate gel provides protection to STP for controlled release in intestinal pH when compared to the enzyme solution.     

Nanosuspension of efavirenz for improved oral bioavailability: formulation optimization,in vitro,in situ and in vivo evaluation

Context: Nanosuspensions (NSs) of poorly water-soluble drugs are known to increase the oral bioavailability.

Objectives: The purpose of this study was to develop NS of efavirenz (EFV) and to investigate its potential in enhancing the oral bioavailability of EFV.

Materials and methods: EFV NS was prepared using the media milling technique. The Box–Behnken design was used for optimization of the factors affecting EFV NS. Sodium lauryl sulfate and PVP K30 were used to stabilize the NS. Freeze-dried NS was completely re-dispersed with double-distilled filtered water.

Results: Mean particle size and zeta potential of the optimized NS were found to be 320.4?±?3.62?nm and –32.8?±?0.4 mV, respectively. X-ray diffraction and differential scanning calorimetric analysis indicated no phase transitions. Rate and extent of drug dissolution in the dissolution medium for NS was significantly higher compared to marketed formulation. The parallel artificial membrane permeability assay revealed that NS successfully enhanced the permeation of EFV. Results of in situ absorption studies showed a significant difference in absorption parameters such as K_a, t_1/2 and uptake percentages between lyophilized NS and marketed formulation of EFV. Oral bioavailability of EFV in rabbits resulting from NS was increased by 2.19-fold compared to the marketed formulation.

Conclusion: Thus, it can be concluded that NS formulation of EFV can provide improved oral bioavailability due to enhanced solubility, dissolution velocity, permeability and hence absorption.     

Development and in vitro evaluation of a nanoemulsion for transcutaneous delivery

Objective: The purpose of this study is to develop a nanoemulsion formulation for its use as a transcutaneous vaccine delivery system.

Materials and methods: With bovine albumin-fluorescein isothiocyanate conjugate (FITC-BSA) as a vaccine model, formulations were selected with the construction of pseudo-ternary phase diagrams and a short-term stability study. The size of the emulsion droplets was furthered optimized with high-pressure homogenization. The optimized formulation was evaluated for its skin permeation efficiency. In vitro skin permeation studies were conducted with shaved BALB/c mice skin samples with a Franz diffusion cell system. Different drug concentrations were compared, and the effect of the nanoemulsion excipients on the permeation of the FITC-BSA was also studied.

Results: The optimum homogenization regime was determined to be five passes at 20?000?psi, with no evidence of protein degradation during processing. With these conditions, the particle diameter was 85.2?nm?±?15.5?nm with a polydispersity index of 0.186?±?0.026 and viscosity of 14.6 cP?±?1.2 cP. The optimized formulation proved stable for 1 year at 4?°C. In vitro skin diffusion studies show that the optimized formulation improves the permeation of FITC-BSA through skin with an enhancement ratio of 4.2 compared to a neat control solution. Finally, a comparison of the skin permeation of the nanoemulsion versus only the surfactant excipients resulted in a steady state flux of 23.44?μg/cm²/h for the nanoemulsion as opposed to 6.10?μg/cm²/h for the emulsifiers.

Conclusion: A novel nanoemulsion with optimized physical characteristics and superior skin permeation compared to control solution was manufactured. The formulation proposed in this study has the flexibility for the incorporation of a variety of active ingredients and warrants further development as a transcutaneous vaccine delivery vehicle.     

Critical evaluation of permeation enhancers for oral mucosal drug delivery

Background: Drug delivery via oral mucosa is an alternative method of systemic administration for various classes of therapeutic agents. Among the oral mucosae, buccal and sublingual mucosae are the primary focus for drug delivery. Buccal delivery offers a clear advantage over the peroral route by avoidance of intestinal and hepatic first-pass metabolism. However, despite offering the possibility of improved systemic drug delivery, buccal administration has been utilized for relatively few pharmaceutical products so far. One of the major limitations associated with buccal delivery is low permeation of therapeutic agents across the mucosa. Various substances have been explored as permeation enhancers to increase the flux/absorption of drugs through the mucosa, but irritation, membrane damage, and toxicity are always associated with them and limit their use. A clinically accepted permeation enhancer must increase membrane permeability without causing toxicity and permanent membrane damage. To date, the information available on oral mucosal permeation enhancement is much less than transdermal enhancement, though oral mucosa is more resistant to damage than other mucosal membranes. This article reviews the various categories of permeation enhancers for oral mucosal drug delivery, their mechanism of action, their usefulness, and the limitations associated with their use. Conclusion: To optimize the concentration of enhancer to limit its toxicity while facilitating an enhancing effect reproducibly will be a big challenge for future developments. Advances in permeability modulation and formulation with appropriate enhancers can provide for effective and feasible buccal drug delivery for many drugs, which otherwise have to be injected or ingested with water.     

Development and in vitro evaluation of oxytetracycline‐loaded PMMA nanoparticles for oral delivery against anaplasmosis

Poly‐methyl methacrylate (PMMA) polymer with remarkable properties and merits are being preferred in various biomedical applications due to its biocompatibility, non‐toxicity and cost effectiveness. In this investigation, oxytetracycline‐loaded PMMA nanoparticles were prepared using nano‐precipitation method for the treatment of anaplasmosis. The prepared nanoparticles were characterised using dynamic light scattering (DLS), atomic force microscopy (AFM), differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The mean average diameter of the nanoparticles ranged between 190–240 nm and zeta potential was found to be −19 mV. The drug loading capacity and entrapment efficiency of nanoparticles was found varied between 33.7–62.2% and 40.5–60.0%. The in vitro drug release profile exhibited a biphasic phenomenon indicating controlled drug release. The uptake of coumarin‐6(C‐6)‐loaded PMMA nanoparticles in Plasmodium falciparum (Pf 3D7) culture model was studied. The preferential uptake of C‐6‐loaded nanoparticles by the Plasmodium infected erythrocytes in comparison with the uninfected erythrocytes was observed under fluorescence microscopy. These findings suggest that oxytetracycline‐loaded PMMA nanoparticles were found to be an effective oral delivery vehicle and an alternative pharmaceutical formulation in anaplasmosis treatment, too.Inspec keywords: nanoparticles, nanomedicine, conducting polymers, microorganisms, cellular biophysics, toxicology, drug delivery systems, light scattering, atomic force microscopy, differential scanning calorimetry, Fourier transform infrared spectra, bloodOther keywords: in vitro evaluation, oxytetracycline‐loaded PMMA nanoparticles, anaplasmosis, polymethyl methacrylate polymer, biocompatibility, toxicity, oxytetracycline‐nanoparticles, nanoprecipitation method, dynamic light scattering, atomic force microscopy, AFM, differential scanning calorimetry, DSC, Fourier transform infrared spectroscopy, FTIR spectroscopy, zeta potential, drug loading capacity, entrapment efficiency, in vitro drug release profile, biphasic phenomenon, coumarin‐6(C‐6)‐loaded PMMA nanoparticles, plasmodium falciparum culture model, preferential uptake, plasmodium infected erythrocytes, fluorescence microscopy, oral delivery vehicle, anaplasmosis treatment, size 190 nm to 240 nm     

Preparation and evaluation of gel formulations for oral sustained delivery to dysphagic patients

Background: Oral sustained release gel formulations may provide a means of administering drugs to dysphagic and geriatric patients who have difficulties with handling and taking oral dosage forms. Aim: We have designed gel formulations for the oral administration of paracetamol with suitable rheological characteristics for ease of administration to patients with swallowing difficulties and sufficient integrity in the acidic environment of the stomach to achieve a sustained release of this drug. Method: Gels formed by gelatin, agar, gellan, pectin, and xyloglucan were assessed for suitable gel strength and in vitro and in vivo release characteristics. Results: Gellan (1.5%?w/v) and xyloglucan gels (1.5%?w/w) had acceptable gel strengths for ease of swallowing and retained their integrity in the rat stomach sufficiently well to sustain the release of paracetamol over a period of 6 hours. Comparison of 1.5%?xyloglucan gels with a commercially available preparation with identical paracetamol concentrations demonstrated improved sustained release properties of the xyloglucan gels. Conclusions: Gels formed by gellan and xyloglucan have suitable rheological and sustained release characteristics for potential use as vehicles for oral delivery of drugs to dysphagic patients.     

Proniosomal gel-mediated transdermal delivery of bromocriptine: in vitro and ex vivo evaluation

Vesicular systems endow large opportunities for the transdermal delivery of therapeutics. The present study was designed to investigate the potential of a novel class of vesicular system ‘proniosome’ as a carrier for transdermal delivery of bromocriptine (BCT). Proniosome formulations were prepared by the coacervation-phase separation method and the influence of factors like surfactant type and its amount, lipid concentration, cholesterol amount and drug content were studied. Span 60 was the most appropriate surfactant, and yielded vesicle size and percentage encapsulation efficiency of 1.3 µm and 98.9%, respectively. The developed system was characterised w.r.t. morphology, transition temperature, drug release, skin permeation and skin irritancy. Proniosomes exhibited a sustained release pattern of BCT in vitro. Skin permeation study revealed high penetration of proniosomes with sustained release of BCT through rat skin. The optimised proniosomal formulation showed enhanced transdermal flux of 16.15 μg/cm²/h as compared to 3.67 μg/cm²/h for drug dispersion. The developed formulations were observed as non-irritant to the rat skin and were found as quite stable at 4 and 25 °C for 90 days w.r.t. vesicle size and drug content. The dried proniosomal formulation could act as a promising alternative to niosomes and preferably for transdermal delivery of BCT.     

Solid lipid nanoparticles as vesicles for oral delivery of olmesartan medoxomil: formulation,optimization and in vivo evaluation

Objective: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery.

Materials and methods: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug–excipients interactions, powder X-ray diffraction analysis and drug release in vitro.

Results and discussion: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100?nm, PDI 0.291, zeta potential of ?23.4?mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration.

Conclusion: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.     

In vitro/in vivo evaluation of felodipine micropowders prepared by the wet-milling process combined with different solidification methods

In order to improve the in vitro dissolution rate and in vivo oral bioavailability of the poorly water soluble drug, felodipine (FELO), the wet-milling process was employed involving co-grinding with HPMC E5 and the in vitro release rate as investigated. After solidification by spray drying or freeze drying, the microsized powders were characterized in terms of their size, morphology, and in vitro dissolution rate. The oral bioavailability of this dry powder for suspension was evaluated in rats. After milling with 8% HPMC E5 and freeze drying, the powder mixture had an average particle size of 2.249?±?1.497?μm and displayed an excellent dissolution rate of up to 93.2% within 10?minutes. DSC and PXRD investigations confirmed the absence of any crystal transformation during the wet-milling process. Using two different solidification methods, powders were stable for 6 months with regard to their in vitro dissolution rate. Significantly improved bioavailability was obtained for the wet-milled suspension before solidification and freeze dried powders with 6.8- (p?p?p?>?0.05) in bioavailability was seen for the spray dried powders. These effects suggest that the solidification method plays an important role in modifying the bioavailability of FELO after wet milling. Consequently, wet-milling is an effective technique to enhance the bioavailability of FELO and to maintain these benefits, freeze-drying is a feasible approach to solidifying the wet-milled suspension for industrial applications.     

Development and evaluation of chitosan and chitosan derivative nanoparticles containing insulin for oral administration

Abstract

Chitosan and chitosan derivative-based nanoparticles loaded with insulin were prepared by self-assembly, via electrostatic interactions between the negatively charged drug and the positively charged polymers. In the investigated chitosan derivatives, the amine groups were substituted to different extents (33, 52 or 99%) by 2-hydroxypropyl-3-trimethyl ammonium groups, rendering the polymers permanently positively charged, irrespective of the pH. This is an important property for this type of advanced drug delivery system, since the pH value changes throughout the gastrointestinal tract and electrostatic interactions are of crucial importance for the stability of the nanoparticles. Permanent positive charges are also in favor of mucoadhesion. In contrast, the electric charges of chitosan molecules depend on the pH of the surrounding medium. Since the solubility of the chitosan derivatives increased due to the introduction of quaternary ammonium groups, sodium tripolyphosphate (TPP) was added to the systems to create supplementary cross-links and stabilize the nanoparticles. The presence of TPP influenced both the dissolution of the polymer matrix as well as the resulting release kinetics. The underlying drug release mechanisms were found to be more complex than simple diffusion under constant conditions, likely involving also ionic interactions and matrix dissolution. The most promising formulation was based on a chitosan derivative with 33% substitution degree and characterized by a Z-average of 142?±?10?nm, a zeta potential of 29?±?1?mV, an encapsulation efficacy of 52?±?3% and, most importantly, the release of insulin was sustained for more than 210?min.     

Development of microemulsion of mitotane for improvement of oral bioavailability

Background: Mitotane (o,p′-DDD) is considered to be the drug of choice in the treatment of nonresectable and metastasized adrenocortical carcinoma. However, mitotane has poor solubility in the gastrointestinal tract and very low bioavailability. Consequently, to achieve therapeutic plasma level, high cumulative doses (4–6 g/day) of mitotane were usually used during 3–5 months. To shorten this equilibration time and reduce gastrointestinal side effects, a self-microemulsifying drug delivery system (SMEDDS) of mitotane has been developed. Method: First time, the solubility of mitotane was determined in various oils and surfactants; then, the influence of oils, surfactants, and cosurfactants on the formation of SMEDDS was investigated by constructing ternary phase diagrams. SMEDDS was characterized by morphological observations and droplet size measurements. Intestinal drug permeation of SMEDDS of mitotane (3 mM) was assessed in an Ussing-type apparatus and the bioavailability was determined in a rabbit model. Results: The optimum formulation consisted of a mixture of Capryol®, Tween®, and Cremophor® EL (33:33:33). The formulation was found to pass through the intestinal barrier much faster than a solution of mitotane (14.85 ± 0.8 versus 3.03 ± 0.2 μmol/cm²). Moreover, after oral administration in rabbits, the relative bioavailability was 3.4, compared with that of the conventional form (Lysodren®). Conclusion: This SMEDDS can now be considered as a very good candidate to optimize the administration of mitotane.     

Improved oral bioavailability of fexofenadine hydrochloride using lipid surfactants: ex vivo,in situ and in vivo studies

The aim of the present study was to improve the dissolution, permeability and therefore oral bioavailability of the fexofenadine hydrochloride (FEX), by preparing lipid surfactant based dispersions using self-emulsifying carriers, i.e. Gelucire 44/14 (GLC) and d-α-tocopheryl polyethylene glycol 1000 succinate (Vitamin E TPGS or TPGS). The reprecipitation studies were conducted using these carriers to evaluate inhibition of reprecipitation by maintaining super saturation state. The aqueous solubility of the FEX was increased linearly with increasing GLC, TPGS concentrations as verified by the phase solubility studies. The dispersions of FEX were prepared in different drug/GLC (GD) and drug/TPGS (TD) ratios by melt method and evaluated. The prepared dispersions showed improved dissolution rate in distilled water as dissolution media and highest dissolution rate was achieved with dispersions prepared using TPGS. The solid state characterization was carried by differential scanning calorimetry and scanning electron microscopy indicated reduced crystallinity of the drug. Fourier transform infrared spectroscopy revealed the compatibility of drug with carriers. The ex vivo permeation studies conducted using intestinal gut sac technique, resulted in reduced efflux of the drug by inhibiting intestinal P-glycoprotein from the dispersions. The in situ perfusion studies and in vivo pharmacokinetic studies in male wistar rats showed improved absorption and oral bioavailability from the prepared dispersions as compared to pure drug.     

Development and in vitro characterization of self-emulsifying drug delivery system (SEDDS) for oral opioid peptide delivery

Aim: In this study, self-emulsifying drug delivery system (SEDDS) for oral delivery of opioid peptide dalargin were developed and characterized in vitro.

Methods: Dalargin lipophilicity was increased by O-esterification of tyrosine OH group, hydrophobic ion pairing, or a combination thereof. Distribution coefficients (log?D) of lipidized dalargin derivatives were determined. Then, dalargin was incorporated in chosen SEDDS, namely SEDDS-1, composed of 50% Capmul 907, 40% Cremophor EL, and 10% propylene glycol and comparatively more lipophilic SEDDS-2 composed of 30% Captex 8000, 30% Capmul MCM, 30% Cremophor EL, and 10% propylene glycol. Additionally, SEDDS were characterized regarding droplet size, polydispersity index (PDI), cloudy point, physical stability and stability against pancreatic lipase. Furthermore, mucus permeating properties of SEDDS and their ability to protect the incorporated dalargin against proteolysis by trypsin, α-chymotrypsin, elastase, simulated gastric fluid (SGF), and simulated intestinal fluid (SIF) were evaluated.

Results: The highest dalargin drug payload of 4.57% in SEDDS-2 was achieved when dalargin palmitate (pDAL) was ion paired with sodium dodecyl sulfate (SDS) in molar ratio 1:1. Moreover, SEDDS-1 and SEDDS-2 had a narrow droplet size distribution with average droplet sizes of 42.1 and 33.1?nm with PDI of 0.042 and 0.034, respectively. Lipolysis study showed that within 30?min 78.5% of SEDDS-1 and 92.1% of SEDDS-2 were digested. In addition, both SEDDS exhibited mucus permeating properties as well as a protective effect against enzymatic degradation by trypsin, α-chymotrypsin, elastase, SGF and SIF.

Conclusion: The results of this study suggest that the developed SEDDS could be considered for oral opioid peptide delivery.     

Preformulation characterization and in vivo absorption in beagle dogs of JFD,a novel anti-obesity drug for oral delivery

JFD (N-isoleucyl-4-methyl-1,1-cyclopropyl-1-(4-chlorine)phenyl-2-amylamine·HCl) is a novel investigational anti-obesity drug without obvious cardiotoxicity. The objective of this study was to characterize the key physicochemical properties of JFD, including solution-state characterization (ionization constant, partition coefficient, aqueous and pH-solubility profile), solid-state characterization (particle size, thermal analysis, crystallinity and hygroscopicity) and drug-excipient chemical compatibility. A supporting in vivo absorption study was also carried out in beagle dogs. JFD bulk powders are prismatic crystals with a low degree of crystallinity, particle sizes of which are within 2–10?μm. JFD is highly hygroscopic, easily deliquesces to an amorphous glass solid and changes subsequently to another crystal form under an elevated moisture/temperature condition. Similar physical instability was also observed in real-time CheqSol solubility assay. pK_a (7.49?±?0.01), log?P (5.10?±?0.02) and intrinsic solubility (S₀) (1.75?μg/ml) at 37?°C of JFD were obtained using potentiometric titration method. Based on these solution-state properties, JFD was estimated to be classified as BCS II, thus its dissolution rate may be an absorption-limiting step. Moreover, JFD was more chemically compatible with dibasic calcium phosphate, mannitol, hypromellose and colloidal silicon dioxide than with lactose and magnesium stearate. Further, JFD exhibited an acceptable pharmacokinetic profiling in beagle dogs and the pharmacokinetic parameters T_max, C_max, AUC_0–t and absolute bioavailability were 1.60?±?0.81?h, 0.78?±?0.47?μg/ml, 3.77?±?1.85?μg·h/ml and 52.30?±?19.39%, respectively. The preformulation characterization provides valuable information for further development of oral administration of JFD.     

Formulation and Development of Self-Nanoemulsifying Granules of Olmesartan Medoxomil for Bioavailability Enhancement

The present investigation was aimed to formulate self-nanoemulsifying granules (SNEGs) of poorly water soluble drug, Olmesartan Medoxomil (OLM) to improve its solubility and oral bioavailability. Acconon sorb 20, Tween 80, and Carbitol were selected as oil, surfactant and cosurfactant, respectively for the development of liquid self-nanoemulsifying system (L-SNEDDS), which subsequently adsorbed on a carrier (Aerosil 200) to develop SNEGs. The results of in vitro and in vivo study of OLM-SNEGs revealed remarkable improvement compared to pure OLM. The present study proposed SNEGs as one of the suitable approach for developing nanosized solid oral dosage forms of OLM.     

Lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan as a new strategy for oral delivery of insulin: in vitro,ex vivo and in vivo characterizations

Objective: The purpose of this research was the development, in vitro, ex vivo and in vivo characterization of lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan.

Methods: Insulin nanoparticles were prepared from methylated N-(4-N,N-dimethylaminobenzyl), methylated N-(4 pyridinyl) and methylated N-(benzyl). Insulin nanoparticles containing non-modified chitosan and also trimethyl chiotsan (TMC) were also prepared as control. The effects of the freeze-drying process on physico-chemical properties of nanoparticles were investigated. The release of insulin from the nanoparticles was studied in vitro. The mechanism of the release of insulin from different types of nanoparticles was determined using curve fitting. The secondary structure of the insulin released from the nanoparticles was analyzed using circular dichroism and the cell cytotoxicity of nanoparticles on a Caco-2 cell line was determined. Ex vivo studies were performed on excised rat jejunum using Frantz diffusion cells. In vivo studies were performed on diabetic male Wistar rats and blood glucose level and insulin serum concentration were determined.

Results: Optimized nanoparticles with proper physico-chemical properties were obtained. The lyophilization process was found to cause a decrease in zeta potential and an increase in PdI as well as and a decrease in entrapment efficiency (EE%) and loading efficiency (LE%) but conservation in size of nanoparticles. Atomic force microscopy (AFM) images showed non-aggregated, stable and spherical to sub-spherical nanoparticles. The in vitro release study revealed higher release rates for lyophilized compared to non-lyophilized nanoparticles. Cytotoxicity studies on Caco-2 cells revealed no significant cytotoxicity for prepared nanoparticles after 3-h post-incubation but did show the concentration-dependent cytotoxicity after 24?h. The percentage of cumulative insulin determined from ex vivo studies was significantly higher in nanoparticles prepared from quaternized aromatic derivatives of chitosan. In vivo data showed significantly higher insulin intestinal absorption in nanoparticles prepared from methylated N-(4-N, N-dimethylaminobenzyl) chitosan nanoparticles compared to trimethyl chitosan.

Conclusion: These data obtained demonstrated that as the result of optimized physico-chemical properties, drug release rate, cytotoxicity profile, ex vivo permeation enhancement and increased in vivo absorption, nanoparticles prepared from N-aryl derivatives of chitosan can be considered as valuable method for the oral delivery of insulin.     

Insulin nanoparticles for transdermal delivery: preparation and physicochemical characterization and in vitro evaluation

Aim: This work is aimed to study the feasibility of insulin nanoparticles for transdermal drug delivery (TDD) using supercritical antisolvent (SAS) micronization process. Methods: The influences of various experimental factors on the mean particle size (MPS) of insulin nanoparticles were investigated. Moreover, the insulin nanoparticles obtained were characterized by scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and thermogravimetric (TG) analyses. Results: Under optimum conditions, uniform spherical insulin nanoparticles with a MPS of 68.2?±?10.8 nm were obtained. The Physicochemical characterization results showed that SAS process has not induced degradation of insulin. Evaluation in vitro showed that insulin nanoparticles were accorded with the Fick's first diffusion law and had a high permeation rate. Conclusion: These results suggest that insulin nanoparticles can have a great potential in TDD systems of diabetes chemotherapy.     

Development and in vitro/in vivo evaluation of dihydroergotamine mesylate loaded maltodextrin-pullulan sublingual films

Dihydroergotamine mesylate (DHE), ergotamine derivative, has been offered for clinical use to stop or treat symptoms of an emerging migraine as injection for more than a half century. It is shown that bioavailability of DHE greatly changes between the subjects and up to 99% of the orally absorbed dose may be cleared by first pass metabolism. The aim of this study was to design and optimize DHE fast-dissolving sublingual films for migraine treatment. For this purpose pullulan and maltodextrin was chosen as film-forming polymers and propylene glycol as plasticizer. For optimization process Box Behnken design was used. The formed films were free from air bubbles, cuttings, or cracks. Disintegration, mechanical strength and dissolution of films were compared. It is found that pullulan and maltodextrin formed films with the most desired properties at the concentration of 1.5% and 2%. The application of optimum formulation to rabbits showed that bioavailability of formulation is about 23.35% with a t_max 20?min. Due to this fast onset of action and higher bioavailability than oral administration, it is suggested that the polymer combinations of pullulan and maltodextrin formed successful films and were considered as an alternative dosage form for DHE in migraine therapy.