In situ intestinal permeability and in vivo absorption characteristics of olmesartan medoxomil in self-microemulsifying drug delivery system

To characterize the intestinal absorption behavior of olmesartan medoxomil (OLM) and to evaluate the absorption-improving potential of a self-microemulsifying drug delivery system (SMEDDS), we performed in situ single-pass intestinal perfusion (SPIP) and in vivo pharmacokinetic studies in rats. The SPIP study revealed that OLM is absorbed throughout whole intestinal regions, favoring proximal segments, at drug levels of 10–90 μM. The greatest value for effective permeability coefficient (P_eff) was 11.4?×?10^?6 cm/s in the duodenum (90 μM); the lowest value was 2.9?×?10^?6 cm/s in the ileum (10 μM). A SMEDDS formulation consisting of Capryol 90, Labrasol, and Transcutol, which has a droplet size of 200?nm and self-dispersion time of 21 s, doubled upper intestinal permeability of OLM. The SMEDDS also improved oral bioavailability of OLM in vivo: a 2.7-fold increase in the area under the curve (AUC) with elevated maximum plasma concentration (C_max) and shortened peak time (T_max) compared to an OLM suspension. A strong correlation (r²?=?0.955) was also found between the in situ jejunal P_eff and the in vivo AUC values. Our study illustrates that the SMEDDS formulation holds great potential as an alternative to increased oral absorption of OLM.     

Upgrading of dissolution and anti-hypertensive effect of Carvedilol via two combined approaches: self-emulsification and liquisolid techniques

Objective: The aim of the study was to design a self-emulsifying drug delivery system (SEDDS) of the anti-hypertensive Carvedilol in liquid and liquisolid forms as a way to enhance its dissolution profile and anti-hypertensive effect.

Methods: Solubility studies of Carvedilol in various oils, surfactants and co-surfactants were conducted, followed by the construction of pseudo-ternary phase diagrams and other in vitro assessments. The selected SEDDS formulation (S1) was adsorbed onto solid powder excipients and compressed into tablets. The resulting liquisolid tablets were evaluated under British Pharmacopoeia (B.P.) specifications. Pre- and post-compression studies were performed to determine the flow properties and evaluate the liquisolid systems, followed by in vivo studies in hypertensive rats.

Results: Attempts of self-emulsification, droplet size, and thermodynamic stability studies showed acceptable results for the S1 formulation containing Capryol 90, Tween 20, and Transcutol HP (10:53.3:26.2%), respectively. Pre-compression studies showed adequate flowability and compatibility of liquid and solid excipients with Carvedilol. The selected liquisolid tablet (LS7) demonstrated the best disintegration and water absorption ratio in addition to satisfactory friability and hardness. A significantly (p?®. The in vivo study of LS7 formulation revealed a rapid significant (p?®.

Conclusion: Self-emulsifying liquisolid tablets expressed rapid onset of action with enhanced anti-hypertensive effect of Carvedilol.     

Improved oral bioavailability of valsartan using proliposomes: design,characterization and in vivo pharmacokinetics

Abstract

The objective of our investigational work was to develop a proliposomal formulation to improve the oral bioavailability of valsartan. Proliposomes were formulated by thin film hydration technique using different ratios of phospholipids:drug:cholesterol. The prepared proliposomes were evaluated for vesicle size, encapsulation efficiency, morphological properties, in vitro drug release, in vitro permeability and in vivo pharmacokinetics. In vitro drug-release studies were performed in simulated gastric fluid (pH 1.2) and purified water using dialysis bag method. In vitro drug permeation was studied using parallel artificial membrane permeation assay (PAMPA), Caco-2 monolayer and everted rat intestinal perfusion techniques. In vivo pharmacokinetic studies were conducted in male Sprague Dawley (SD) rats. Among the proliposomal formulations, F-V was found to have the highest encapsulation efficiency of 95.6?±?2.9% with a vesicle size of 364.1?±?14.9?nm. The in vitro dissolution studies indicated an improved drug release from proliposomal formulation, F-V in comparison to pure drug suspension in both, purified water and pH 1.2 dissolution media after 12?h. Permeability across PAMPA, Caco-2 cell and everted rat intestinal perfusion studies were higher with F-V formulation as compared to pure drug. Following single oral administration of F-V formulation, a relative bioavailability of 202.36% was achieved as compared to pure valsartan.     

Chlorogenic acid stabilized nanostructured lipid carriers (NLC) of atorvastatin: formulation,design and in vivo evaluation

The present work was aimed at developing an optimized oral nanostructured lipid carrier (NLC) formulation of poorly soluble atorvastatin Ca (AT Ca) and assessing its in vitro release, oral bioavailability and pharmacodynamic activity. In this study, chlorogenic acid, a novel excipient having synergistic cholesterol lowering activity was utilized and explored in NLC formulation development. The drug-loaded NLC formulations were prepared using a high pressure homogenization technique and optimized by the Box-Behnken statistical design using the Design-Expert software. The optimized NLC formulation was composed of oleic acid and stearic acid as lipid phase (0.9% w/v), poloxamer 188 as surfactant (1% w/v) and chlorogenic acid (0.05% w/v). The mean particle size, polydispersity index (PDI) and % drug entrapment efficiency of optimized NLC were 203.56?±?8.57?nm, 0.27?±?0.028 and 83.66?±?5.69, respectively. In vitro release studies showed that the release of drug from optimized NLC formulations were markedly enhanced as compared to solid lipid nanoparticles (SLN) and drug suspension. The plasma concentration time profile of AT Ca in rats showed 3.08- and 4.89-fold increase in relative bioavailability of developed NLC with respect to marketed preparation (ATORVA® tablet) and drug suspension, respectively. Pharmacodynamic study suggested highly significant (**p?0.01) reduction in the cholesterol and triglyceride values by NLC in comparison with ATORVA® tablet. Therefore, the results of in vivo studies demonstrated promising prospects for successful oral delivery of AT Ca by means of its chlorogenic acid integrated NLC.     

Development of a chitosan-derivative micellar formulation to improve celecoxib solubility and bioavailability

Context: Celecoxib is an anti-inflammatory drug, specific inhibitor of COX-2, classified as a BCS class II compound due to its very low aqueous solubility (3?μg/mL) and good permeability.

Objective: An innovative micellar formulation of celecoxib has been developed to increase its solubility and, consequently, its oral bioavailability.

Materials and methods: Quaternary-ammonium-palmitoyl-glycol-chitosan (GCPQ) was selected as carrier, due to its micelle-forming ability joined to its solubilizing and enhancer properties towards hydrophobic drugs. A Doehlert design was applied to optimize the drug solubilizing efficiency of the micellar formulation. Tested factors were GCPQ concentration and time and power of probe sonication during micelles formation; the response to maximize was the celecoxib solubility.

Results: The response-surface study allowed a thorough investigation of the effect of factors variations on the response over the considered experimental domain and identification of the best variable combination in order to maximize the desired improvement in drug solubility. The optimized micellar formulation (GCPQ 4.5?mg/mL; 25?min at 60% power of probe sonication) enabled an about 60-fold increase in celecoxib aqueous solubility. The optimized formulation, tested in vivo in mice by the writhing test, allowed a statistically significant shortening (p?p?Conclusions: The results proved that the developed GCPQ micellar formulation is a valuable approach for improving the therapeutic effectiveness of celecoxib.     

Immediate release of ibuprofen from Fujicalin®-based fast-dissolving self-emulsifying tablets

Background: Drug release from a solid form of self-emulsifying drug delivery system (SEDDS) has greatly been limited due to strong adsorption and physical interaction with carriers. To facilitate drug release process in the stomach, an acid-soluble powderizing carrier, Fujicalin^® was evaluated together with different disintegrants and hydrophilic lubricants. Method: Immediate-release self-emulsifying tablets (IR-SETs) of ibuprofen (IBU) was prepared with solidified SEDDS of IBU, various disintegrants, and lubricants, and drug release was evaluated to develop IR-SET that can release IBU with a similar IBU release rate to that obtained with liquid SEDDS. Results: The liquid SEDDS consisted of Capryol 90, Cremophor EL, Labrasol, and IBU at a ratio of 3:4:3:3, and was solidified with various adsorbents. The powderized SEDDS was tabletted by a direct compression. Fujicalin^®-based SEDDS tablets demonstrated remarkably higher dissolution rate of IBU compared with Neusilin^® and Neosyl^®-based SEDDS tablets. The IR-SET formula of IBU prepared with Fujicalin^® as an adsorbent, Polyplasdone^® as a disintegrant, and sodium bicarbonate as a co-disintegrant showed over 90% of initially loaded dose of IBU released within 5?min in a stimulated gastric juice (pH 1.2), exhibiting almost equivalent rate of IBU release to that shown by liquid SEDDS. The particle size analysis revealed no significant differences in droplet sizes of the microemulsions formed from liquid (116?nm) and IR-SET (110?nm). Conclusion: The novel IR-SET can be promising as a fast-releasing SEDDS tablet of IBU for fast onset of action.     

Self-emulsifying drug delivery system for enhanced solubility of asenapine maleate: design,characterization, in vitro,ex vivo and in vivo appraisal

Self-emulsifying drug delivery systems (SES) were developed to improve oral bioavailability of asenapine maleate (ASM), an antipsychotic drug with challenging amphiphobic nature and extensive pre-systemic metabolism. ASM-SES was prepared by choosing the proportion of oil, surfactant, co-surfactant from constructed phase diagram. The in vitro and ex vivo evaluation was done. In vivo evaluation was done through pharmacokinetic and pharmacodynamic studies. Role of lymphatic absorption was studied by lymphatic absorption inhibition study. A formulation consisting of 9.9%, 59.4%, 29.7% and 1% of oil, surfactant, co-surfactant, and drug respectively was considered as optimized formulation. After various evaluation test, the globule size and zeta potential for optimized formulation (SES₄) were found to be 137.9?nm and ?28.8?mV respectively. A maximum of 99.64?±?0.16% of ASM was released from SES₄ in 60?minutes of time. The flux (ex vivo study) increased by 2.33 folds, which prove the enhanced release and permeation of ASM when loaded into SES. The animals administered with SES₄ showed higher activity and good pharmacodynamic response than the control and ASM-Suspension, which may be due to the greater availability of the drug. The maximum pharmacodynamic response was observed at the t_max determined by Pharmacokinetic studies. The bioavailability increased by 1.64 folds with 16.55?±?3.11% as extend of lymphatic absorption (r?=?0.9732). Good in vitro in vivo correlation was observed. ASM-SES is a novel approach to effectively deliver ASM and improve the oral bioavailability.     

Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.     

Pharmaceutical optimization of lipid-based dosage forms for the improvement of taste-masking,chemical stability and solubilizing capacity of phenobarbital

Microemulsions (MEs) and self-emulsifying drug delivery systems (SEEDS) containing phenobarbital (Phe) were developed to improve its chemical stability, solubilizing capacity and taste-masking in oral liquid dosage forms. Cremophor® RH40 and Labrasol® were used as surfactants for the screening of ME regions, Capmul® MCM L, Captex® 355, Imwitor® 408, Myglyol® 840 and Isopropyl myristate were the oil phases assayed; Transcutol® P, Polyethylene-glycol 400, glycerol, Propylene-glycol and ethanol the cosurfactants. Phe stability assay was carried out (20:4:20:56% and 20:4:35:41% (w/w); surfactant:oily phase:cosurfactant:water) for both surfactants; only one containing ethanol showed significant dismissing in its drug content. Solubility capacity for these selected formulations were also evaluated, an amount between 17 and 58?mg/mL of Phe could be loaded. At last, an optimized ME formulation with Cremophor® RH40 20%, Capmul® MCM L 4%, PEG 400 35% and sucralose 2% (w/w) was chosen in order to optimize taste-masking using an electronic tongue. Strawberry along with banana and tutti-frutti flavors plus mint flavor proved to be the best ones. Labrasol-based pre-concentrates were tested for (micro)emulsifying properties; all of them resulted to behave as SEDDS. In summary, a rationale experimental design conducted to an optimized ME for Phe oral pediatric administration which was able to load 5-fold times the currently used dose (4?mg/mL), with no sign of physical or chemical instability and with improved taste; SEDDS for capsule filling were also obtained. The biopharmaceutical advantages described for these dosage forms encourage furthering in vivo evaluation.     

Nanosized nasal emulgel of resveratrol: preparation,optimization, in vitro evaluation and in vivo pharmacokinetic study

Abstract

Nano-emulgel has become one of the most significant controlled release systems, which has the advantages of both gels and nano-emulsions. This work aims at the formulation of nasal nano-emulgel for resveratrol, employing carbopol 934 and poloxamer 407 as the gelling agents. The optimum nano-emulsion was determined through further characterization of the selected system. The nasal nano-emulgel was prepared and tested for the in vitro release, the release kinetics, FTIR, ex vivo permeation, nasal mucosa toxicity, and in vivo pharmacokinetic study. The optimum nano-emulsion consisted of Tween 20, Capryol 90, and Transcutol at a ratio of (54.26: 23.81: 21.93%v/v), and it exhibited transmittance of 100%, resveratrol solubility of 159.9?±?6.4?mg/mL, globule size of 30.65?nm. The in vitro resveratrol released from nano-emulsion and nasal nano-emulgel was 96.17?±?4.43% and 78.53?±?4.7%, respectively. Ex vivo permeation was sustained during 12?h up to 63.95?±?4.7%. The histopathological study demonstrated that the formula is safe and tolerable to the nasal mucosa. C_max and AUC _(0–∞) of resveratrol obtained after nasal administration of nasal nano-emulgel was 2.23 and 8.05 times, respectively. Similarly, T_max was increased up to 3.67?±?0.82?h. The optimized nasal nano-emulgel established intranasal safety and bioavailability enhancement so it is considered as a well-designed system to target the brain.     

In vitro and in vivo evaluation of cyclodextrin-based nanosponges for enhancing oral bioavailability of atorvastatin calcium

The aim of this study was to explore the feasibility of complexing the poorly water-soluble drug atorvastatin calcium (AC) with β-cyclodextrin (β-CD) based nanosponges (NS), which offer advantages of improving dissolution rate and eventually oral bioavailability. Blank NS were fabricated at first by reacting β-CD with the cross-linker carbonyldiimidazole at different molar ratios (1:2, 1:4, and 1:8), then NS of highest solubilization extent for AC were complexed with AC. AC loaded NS (AC-NS) were characterized for various physicochemical properties. Pharmacokinetic, pharmacodynamics and histological finding of AC-NS were performed in rats. The prepared AC-NS showed particles size ranged from 408.7?±?12.9 to 423?±?15.9?nm while zeta potential values varied from ?21.7?±?0.90 to ?22.7?±?0.85?mV. The loading capacity varied from 17.9?±?1.21 to 34.1?±?1.16%. DSC, FT–IR, and PXRD studies confirmed the complexation of AC with NS and amorphous state of the drug in the complex. AC-NS displayed a biphasic release pattern with increase in the dissolution rate of AC as compared to plain AC. Oral administration of AC-NS (1:4 w/w, drug: NS) to rats led to 2.13-folds increase in the bioavailability as compared to AC suspension. Pharmacodynamics studies in rats with fatty liver revealed significant reduction (p?in vivo performance of AC.     

Preparation,characterization, in vivo biodistribution and pharmacokinetic studies of donepezil-loaded PLGA nanoparticles for brain targeting

Objective: Alzheimer’s disease (AD) is a progressive neurodegenerative disorder manifested by cognitive, memory deterioration and variety of neuropsychiatric symptoms. Donepezil is a reversible cholinesterase inhibitor used for the treatment of AD. The purpose of this work is to prepare a nanoparticulate drug delivery system of donepezil using poly(lactic-co-glycolic acid) (PLGA) for sustained release and efficient brain targeting.

Materials and methods: PLGA nanoparticles (NPs) were prepared by the solvent emulsification diffusion–evaporation technique and characterized for particle size, particle-size distribution, zeta potential, entrapment efficiency, drug loading and interaction studies and in vivo studies using gamma scintigraphy techniques.

Results and discussion: The size of drug-loaded NPs (drug polymer ratio 1:1) was found to be 89.67?±?6.43?nm. The TEM and SEM images of the formulation suggested that particle size was within 20–100?nm and spherical in shape, smooth morphology and coating of Tween-80 on the NPs was clearly observed. The release behavior of donepezil exhibited a biphasic pattern characterized by an initial burst release followed by a slower and continuous sustained release. The biodistribution studies of donepezil-loaded PLGA NPs and drug solution via intravenous route revealed higher percentage of radioactivity per gram in the brain for the nanoparticulate formulation as compared with the drug solution (p?Conclusion: The high concentrations of donepezil uptake in brain due to coated NPs may help in a significant improvement for treating AD. But further, more extensive clinical studies are needed to check and confirm the efficacy of the prepared drug delivery system.     

Tracking the effect of microspheres size on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot in vitro and in vivo

The effects of particle size of microspheres on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot (m-SAIB) was investigated to develop a long-term sustained release drug delivery system with low burst release both in vitro and in vivo. A model drug, risperidone, was first encapsulated into PLGA microspheres with different particle sizes using conventional emulsification and membrane emulsification methods. The m-SAIB was prepared by dispersing the risperidone-microspheres in the SAIB depot. The drug release from m-SAIB was double controlled by the drug diffusion from the microspheres into SAIB matrix and the drug diffusion from the SAIB matrix into the medium. Large microspheres (18.95?±?18.88?µm) prepared by the conventional homogenization method exhibited porous interior structure, which contributed to the increased drug diffusion rate from microspheres into SAIB matrix. Consequently, m-SAIB containing such microspheres showed rapid initial drug release (C_max?=_?110.1?±54.2?ng/ml) and subsequent slow drug release (C_s(4–54d)=?2.7?±?0.8?ng/ml) in vivo. Small microspheres (5.91?±?2.24?µm) showed dense interior structure with a decreased drug diffusion rate from microspheres into SAIB matrix. The initial drug release from the corresponding m-SAIB was significantly decreased (C_max?=_?40.9?±?13.7?ng/ml), whereas the drug release rate from 4 to 54 d was increased (C_s(4–54d)=4.1?±?1.0?ng/ml). By further decreasing the size of microspheres to 3.38?±?0.70?µm, the drug diffusion surface area was increased, which subsequently increased the drug release from the m-SAIB. These results demonstrate that drug release from the m-SAIB can be tailored by varying the size of microspheres to reduce the in vivo burst release of SAIB system alone.     

Hyperoside nanocrystals for HBV treatment: process optimization,in vitro and in vivo evaluation

The aim of this study was to develop hyperoside (Hyp) nanocrystals to enhance its dissolution rate, oral bioavailability and anti-HBV activity. Hyp nanocrystals were prepared using high pressure homogenization technique followed by lyophilization. A Box–Behnken design approach was employed for process optimization. The physicochemical properties, pharmacokinetics and anti-HBV activity in vivo of Hyp nanocrystal prepared with the optimized formulation were systematically investigated. Hyp nanocrystals prepared with the optimized formulation was found to be rod shaped with particle size of 384?±?21?nm and PDI of 0.172?±?0.027. XRPD studies suggested slight crystalline change in drug. Dissolution rate obtained from Hyp nanocrystals were markedly higher than pure Hyp. The nanocrystals exhibited enhanced C_max (7.42?±?0.73 versus 3.80?±?0.66?mg/L) and AUC_0???t (193.61?±?16.30 versus 91.92?±?17.95?mg·h/L) with a 210.63% increase in relative bioavailability. Hyp nanocrystals exhibited significantly greater anti-HBV activity than Hyp. These results suggested that the developed nanocrystals formulation had a great potential as a viable approach to enhance the bioavailability of Hyp.     

Preparation,characterization and in vitro and in vivo evaluation of a solid dispersion of Naringin

Naringin (NA) is one of typical flavanone glycosides widely distributed in nature and possesses several biological activities including antioxidant, anti-inflammatory, and antiapoptotic. The aim of this study was to develop solid dispersion (SD) and to improve the dissolution rate and oral bioavailability of NA. NA–SD was prepared by the traditional preparation methods using PEG6000, F68, or PVP K30 as carrier at different drug to carrier ratios. According to the results of solubility and in vitro dissolution test, the NA–PEG6000 (1:3) SD was considered as an optimal formulation to characterize by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry and powder X-ray diffraction. Furthermore, oral bioavailabilities of NA–PEG6000 (1:3) SD and NA–suspension with the same dosage were investigated in SD rats. The results confirmed the formation of SD and the pharmacokinetic parameters of NA–PEG6000 (1:3) SD (C_max?=?0.645?±?0.262?µg/ml, AUC_0–t?=?0.471?±?0.084?µg/ml?h) were higher than that of NA–suspension (C_max?=?0.328?±?0.183?µg/ml, AUC_0–t =?0.361?±?0.093?µg/ml?h). Based on the results, the SD is considered as a promising approach to enhance the dissolution rate and oral bioavailability of NA.     

Formulation and in vitro evaluation of self-emulsifying formulations of Cinnarizine

The main objectives of this study were to improve the aqueous solubility and to modify in vitro dissolution profile of hydrophobic drug using self-emulsifying drug delivery systems (SEDDS). SEDDS were formulated using Capmul PG-12, Cremophor RH 40 and Tween 20 at different weight ratios and incorporated with Cinnarizine. The drug incorporation into pre-concentrate and drug solubility in phosphate buffer (pH 7.2) were investigated. In addition, the mean droplet size and drug release profile of the SEDDS were also determined. The drug incorporation was over 120?mg per 0.5?g pre-concentrate regardless of the composition of the formulations. The solubility of Cinnarizine in phosphate buffer (pH 7.2) was at least 1500 μM in the SEDDS. Formulations with only 10% w/w Capmul PG-12 were less than 20?nm in mean diameter while those produced with at least 20% w/w Capmul PG-12 were more than 100?nm regardless of the ratios of Cremophor RH 40 to Tween 20. SEDDS showed a significant increase of the mean percentage drug release than pure drug (p?<?0.0001). In general, the SEDDS with 30% w/w of Capmul PG-12 provided the greatest enhancement in drug solubility in phosphate buffer as well as rapid drug release despite forming larger droplets upon emulsification. The combination of Capmul PG-12, Tween 20 and Cremophor RH 40 can produce SEDDS which can be used as an alternative dosage form for poorly water soluble drug.     

Development and evaluation of nanosized niosomal dispersion for oral delivery of Ganciclovir

Encapsulation of Ganciclovir in lipophilic vesicular structure may be expected to enhance the oral absorption and prolong the existence of the drug in the systemic circulation. So the purpose of the present study was to improve the oral bioavailability of Ganciclovir by preparing nanosized niosomal dispersion. Niosomes were prepared from Span40, Span60, and Cholesterol in the molar ratio of 1:1, 2:1, 3:1, and 3:2 using reverse evaporation method. The developed niosomal dispersions were characterized for entrapment efficiency, size, shape, in vitro drug release, release kinetic study, and in vivo performance. Optimized formulation (NG8; Span60:Cholesterol 3:2 molar ratio) has shown a significantly high encapsulation of Ganciclovir (89?±?2.13%) with vesicle size of 144?±?3.47?nm (polydispersity index [PDI]?=?0.08). The in vitro release study signifies sustained release profile of niosomal dispersions. Release profile of prepared formulations have shown that more than 85.2?±?0.015% drug was released in 24?h with zero-order release kinetics. The results obtained also revealed that the types of surfactant and Cholesterol content ratio altered the entrapment efficiency, size, and drug release rate from niosomes. In vivo study on rats reveals five-time increment in bioavailability of Ganciclovir after oral administration of optimized formulation (NG8) as compared with tablet. The effective drug concentration (>0.69 µg/mL in plasma) was also maintained for at least 8?h on administration of the niosomal formulation. In conclusion, niosomes can be proposed as a potential oral delivery system for the effective delivery of Ganciclovir.     

Novel naproxen/esomeprazole magnesium compound pellets based on acid-independent mechanism: in vitro and in vivo evaluation

The purpose of this study was to develop the novel naproxen/esomeprazole magnesium compound pellets (novel-NAP/EMZ) depending on EMZ acid-independent mechanism which has been proved to be predominate in the mechanism of co-therapy with nonsteroidal anti-inflammatory drug. The novel-NAP/EMZ compound pellets, composed of NAP colon-specific pellets (NAP-CSPs) and EMZ modified-release pellets (EMZ-MRPs), were prepared by fluid-bed coating technology with desired in vitro release profiles. The resulting pellets were filled into hard gelatin capsules for in vivo evaluation in rats and compared with the reference compound pellets, consisted of NAP enteric-coated pellets (NAP-ECPs) and EMZ immediate-release pellets (EMZ-IRPs). The reference compound pellets were prepared simulating the drug delivery system of VIMOVO^®. In vivo pharmacokinetics, EMZ-MRPs had significantly larger AUC_0–t (p?0–_t. Compared to the reference compound pellets, the novel-NAP/EMZ compound pellets did not show distinct differences in histological mucosal morphology. However, biochemical tests exhibited enhanced total antioxidant capacity, increased nitric oxide content and reduced malondialdehyde level for novel-NAP/EMZ compound pellets, indicating that the acid-independent action took effect. The gastric pH values of novel-NAP/EMZ compound pellets were at a low and stable level, which could ensure normal physiological range of human gastric pH. As a result, the novel-NAP/EMZ compound pellets may be a more suitable formulation with potential advantages by improving bioavailability of drug and further reducing undesirable gastrointestinal damages.     

Artesunate-loaded chitosan/lecithin nanoparticles: Preparation,characterization, and in vivo studies

Artesunate (AST), the most widely used artemisnin derivative, has poor aqueous solubility and suffers from low oral bioavailability (~40%). Under these conditions, nanoparticles with controlled and sustained released properties can be a suitable solution for improving its biopharmaceuticals properties. This work reports the preparation and characterization of auto-assembled chitosan/lecithin nanoparticles loaded with AST and AST complexed with β-cyclodextrin (β-CD) to boost its antimalarial activity. The nanoparticles prepared by direct injection of lecithin alcoholic solution into chitosan/water solution have shown the particle size distribution below 300?nm. Drug entrapment efficiency was found to be maximum (90%) for nanoparticles containing 100?mg of AST. Transmission electron microscopy images show spherical shape with contrasted corona (chitosan) surrounded by a lipidic core (lecithin + isopropyl myristate). Differential scanning calorimeter thermograms demonstrated the presence of drug in drug-loaded nanoparticles along with the disappearance of decomposition exotherm suggesting the increased physical stability of drug in prepared formulations. Negligible changes in the characteristic peaks of drug in Fourier-transform infrared spectra indicated the absence of any interaction among the various components entrapped in the nanoparticle formulation. In vitro drug release behavior was found to be influenced by pH value. Increased in vivo antimalarial activity in terms of less mean percent parasitemia was observed in infected Plasmodium berghei mice after the oral administration of all the prepared nanoparticle formulations.