Effect of methylimidazolium-based ionic liquids on vapor–liquid equilibrium behavior of tert-butyl alcohol + water azeotropic mixture at 101.3 kPa

Three ionic liquids(ILs),1-ethyl-3-methylimidazolium bromine([EMIM]Br),1-butyl-3-methylimidazolium bromine([BMIM]Br),and 1-hexyl-3-methylimidazolium bromine([HMIM]Br),were used as the solvent for separation of {tert-butyl alcohol(TBA)+ water} azeotrope.Vapor–liquid equilibrium(VLE)data for {TBA + water + IL}ternary systems were measured at 101.3 k Pa.The results indicate that all the three ILs produce an obvious effect on the VLE behavior of {TBA + water} system and eliminate the azeotropy in the whole concentration range.[EMIM]Br is the best solvent for the separation of {TBA + water} system by extractive distillation among the three ILs.The experimental VLE data for the ternary systems are correlated with the NRTL model equation with good correlations.Explanations are given with activity coefficients of water and TBA,and the experimental VLE-temperature data for {TBA or water + IL} binary systems.     

Effects of imidazolium-based ionic liquids on the isobaric vapor–liquid equilibria of methanol + dimethyl carbonate azeotropic systems

The separation of methanol(MeOH) and dimethyl carbonate(DMC) is important but difficult due to the formation of an azeotropic mixture. In this work, isobaric vapor–liquid equilibrium(VLE) data for the ternary systems containing different imidazolium–based ionic liquids(ILs), i.e. MeOH + DMC + 1-butyl-3-methy-limidazolium bis[(trifluoromethyl)sulfonyl]imide([Bmim][Tf_2N]), MeOH + DMC + 1-ethyl-3-methyl-imidazolium bis[(trifluoromethyl)sulfonyl]imide([Emim][Tf_2N]), and MeOH + DMC + 1-ethyl-3-methylimidazolium hexafluorophosphate([Emim][PF6])) were measured at 101.3 kPa. The mole fraction of IL was varied from0.05 to 0.20. The experimental data were correlated with the NRTL and Wilson equations, respectively. The results show that imidazolium-based ILs were beneficial to improve the relative volatility of MeOH to DMC,and [Bmim][Tf_2 N] showed a much more excellent performance on the activity coefficient of MeOH. The interaction energies of system components were calculated using Gaussian program, and the effects of cation and anion on the separation coefficient of the azeotropic system were discussed.     

Salt effect on the liquid–liquid equilibrium of the ternary (water + phenol + methyl isobutyl ketone) system: Experimental data and correlation

The effects of NaCl, KCl and Na_2SO_4 on the liquid–liquid equilibrium(LLE) data for the ternary system, water+ phenol + methyl isobutyl ketone, were determined at 0.101 MPa and 333.15 K and 343.15 K.The nonrandom two-liquid(NRTL) model was used to correlate the experimental data and to yield corresponding binary interaction parameters for these salt containing systems.The Hand and Othmer–Tobias equations were used to confirm the dependability of the determined LLE data in this work.Distribution coefficient and selectivity were used to evaluate the extraction performance of methyl isobutyl ketone with the existence of salt.The magnitude of salt effect on the water + phenol + methyl isobutyl ketone(MIBK) system is in the following order: Na_2SO_4NaClKCl.     

单乙醇胺和二乙醇胺甲酸盐离子液体对水、甲醇和乙醇挥发度的影响(英文)

Vapor pressures were measured for six binary systems containing water, ethanol, or methanol with one of the two ionic liquids （ILs） at different component concentrations and temperatures using a quasi-static ebulliometer, with the ILs mono-ethanolammonium formate （[HMEA][HCOO]） and di-ethanolammonium formate （[HDEA][HCOO]）. The vapor pressures of the IL-containing binary systems are well correlated using the NRTL model with an overall average absolute relative deviation （AARD） of 0.0062. The effect of ILs on the vapor pressure depression of sol-vents at 0.050 mole fraction of IL is that [HDEA][HCOO]〉[HMEA][HCOO], and the vapor pressure lowering de-gree follows the order of water〉methanol〉ethanol. Further, the activity coefficients of three solvents （viz. water, ethanol, and methanol） for the binary systems{solvent （1）＋IL （2）}predicted based on the fitted NRTL parameters at T=333.15 K indicate that the two ILs generate a negative deviation from Raoult’s law for water and methanol and a positive deviation for ethanol to a varying degree, change the relative volatility of a solvent. [HMEA][HCOO] may be a promising entrainer to efficiently separate ethanol aqueous solutions by special rectification.     

乙腈+[C4mim][Cl]、乙腈+[C4mim][BF4]、乙腈+[C6mim][Cl]的气液平衡测定与关联（英文）

Vapor pressures were measured for acetonitrile+1-butyl-3-methylimidazolium chloride ([C4mim][Cl]),+1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) and+1-hexyl-3-methylimidazolium chloride ([C6mim][Cl]) at temperatures of 313 to 353 K by a quasi-static method. The experimental data for the binary sys-tems were correlated by the non-random two liquid (NRTL) equation with an average absolute relative deviation (AARD) of within 1.84%. The results indicate that the three ionic liquids (ILs) can result in a negative deviation from the Raoult's law for the binary solutions containing acetonitrile, and the affinity between ILs and acetonitrile mole-cules fol ows the order [C4mim][BF4]+acetonitrile N [C4mim][Cl]+acetonitrile N [C6mim][Cl]+acetonitrile.     

立方型+缔合状态方程模拟离子液体的pVT性质和汽液平衡(英文)

Combining Peng-Robinson (PR) equation of state (EoS) with an association model derived from shield-sticky method (SSM) by Liu et al., a new cubic-plus-association (CPA) EoS is proposed to describe the ther-modynamic properties of pure ionic liquids (ILs) and their mixtures. The new molecular parameters for 25 ILs are obtained by fitting the experimental density data over a wide temperature and pressure range, and the overall aver-age deviation is 0.22%. The model parameter b for homologous ILs shows a good linear relationship with their mo-lecular mass, so the number of model parameters is reduced effectively. Using one temperature-independent binary adjustable parameter kij, satisfactory correlations of vapor-liquid equilibria (VLE) for binary mixtures of ILs + non-associating solvents and + associating solvents are obtained with the overall average deviation of vapor pressure 2.91% and 7.01%, respectively. In addition, VLE results for ILs + non-associating mixtures from CPA, lattice-fluid (LF) and square-well chain fluids with variable range (SWCF-VR) EoSs are compared.     

Determination and correlation solubility of m-phenylenediamine in (methanol,ethanol, acetonitrile and water) and their binary solvents from 278.15 K to 313.15 K

In this study, the solubility of m-phenylenediamine in four pure solvents(methanol, ethanol, acetonitrile and water) and three binary solvent(methanol + water),(ethanol + water) and(acetonitrile + water) systems were determined in the temperature ranging from 278.15 K to 313.15 K by using the gravimetric method under atmospheric pressure. In the temperature range of 278.15 K to 313.15 K, the mole fraction solubility values of m-phenylenediamine in water, methanol, ethanol, and acetonitrile are 0.0093–0.1533, 0.1668–0.5589,0.1072–0.5356, and 0.1717–0.6438, respectively. At constant temperature and solvent composition, the mole fraction solubility of o-phenylenediamine in four pure solvents was increased as the following order:water b ethanol b methanol b acetonitrile; and in the three binary solvent mixtures could be ranked as follows:(ethanol + water) b(methanol + water) b(acetonitrile + water). The relationship between the experimental temperature and the solubility of m-phenylenediamine was revealed as follows: the solubility of mphenylenediamine in pure and binary solvents could be increased with the increase of temperature. The experimental values were correlated with the Jouyban–Acree model, van't Hoff–Jouyban–Acree model, modified Apelblat–Jouyban–Acree model, Sun model and Ma model. The standard dissolution enthalpy, standard dissolution entropy and the Gibbs energy were calculated based on the experimental solubility data. In the binary solvent mixtures, the dissolution of m-phenylenediamine could be an endothermic process. The solubility data,correlation equations and thermodynamic property obtained from this study would be invoked as basic data and models regarding the purification and crystallization process of m-phenylenediamine.     

甲烷水合物在纯水和抑制剂体系中的生成动力学

Kinetic data of methane hydrate formation in the presence of pure water,brines with single salt and mixed salts,and aqueous solutions of ethylene glycol(EG) and salt EG were measured.A new kinetic model of hydrate formation for the methane water systems was developed based on a four-step formation mechanism and reaction kinetic approach.The proposed kinetic model predicts the kinetic behavior of methane hydrate formation in pure water with good accuracy.The feasibility of extending the kenetic model of salt(s) and EG containing systems was explored.     

含CaCl2的乙酸2-甲基-1-丁酯溶液饱和蒸汽压的测定及关联

The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The experimental data were correlated with two equations,a modified Antoine equation with the dissolved salt taken into account and a nonrandom two liquid-electrolyte(e-NRTL)model.Both models are in good agreement with the experimental data.This study provides essential physical data for further investigation of vapor-liquid equilibrium system containing salt.     

水-乙醇-1-丁基-3-甲基咪唑乙酸盐三元体系汽液平衡测定及模型

Vapor-liquid equilibrium (VLE) data were measured for ternary system water + ethanol + 1-butyl-3- methylimidazolium acetate ([bmim][OAc]), in a relatively wide range of ionic liquid (IL) mass fractions up to 0.8. Six sets of complete T-x-y data were obtained, in which the mole fraction of ethanol on IL-free basis was fixed separately at 0.1, 0.2, 0.4, 0.6, 0.8, and approximate 0.98. The non-random-two-liquid (NRTL) and electrolyte non-random-two-liquid (eNRTL) equations were used for correlation, showing similar deviations. The ternary VLE was also modeled with the correlation from two data sets, with the mole fractions of ethanol on IL-free basis being 0.1 and approximate 0.98. The VLE data were also reproduced satisfactorily. With the eNRTL model, the root-mean-square deviation for temperature is 0.79 K and that for vapor-phase mole fraction is 0.0094. The calculations are in good agreement with experimental data. The effect of the IL on the VLE behavior of the volatile components is also illustrated.     

含离子液体乙腈-正丙醇体系的等压汽液平衡

常压(101.3 kPa)下, 测定了如下体系的汽液平衡数据:乙腈-正丙醇-氯化1-苄基-3-甲基咪唑([BzMIM][Cl])、乙腈-正丙醇-溴化1-苄基-3-甲基咪唑([BzMIM][Br])、乙腈-正丙醇-溴化1-己基-3-甲基咪唑([HMIM][Br]), 考察了3种离子液体对乙腈-正丙醇体系相平衡行为的影响。实验结果表明, 3种离子液体都能够提高乙腈对正丙醇的相对挥发度, 3种离子液体提高相对挥发度的顺序为 [BzMIM][Cl] > [BzMIM][Br] > [HMIM][Br]。用NRTL模型对测得的汽液平衡数据进行了关联, 关联结果与实验结果具有良好的一致性。     

乙腈+水+离子液体等压汽液平衡测定与计算

采用改进的Ellis平衡蒸馏仪测定了乙腈+水+1-乙基-3-甲基咪唑磷酸二乙酯盐([EMIM][DEP])、乙腈+水+{1-乙基-3-甲基咪唑醋酸盐([EMIM][OAC])+[EMIM][DEP]}常压(101.3 kPa)等压汽液平衡(VLE)数据。实验结果表明，备选离子液体可促进水+乙腈混合物的分离并消除其共沸点。借助NRTL模型成功关联了含离子液体的三元和四元VLE实验数据，获得了乙腈-[EMIM][DEP]、水-[EMIM][DEP]和[EMIM][OAC]-[EMIM][DEP]二元交互作用参数。应用COSMO-SAC预测了实验VLE，结果令人满意。量化计算表明可与水形成强相互作用的离子液体更易促进乙腈与水的分离。     

离子液体对乙腈-水共沸物系汽液平衡的影响

选择离子液体1-丁基-3-甲基咪唑氯盐（Bmin[Cl]）作为分离乙腈-水共沸物系的溶剂。在0.101MPa下测定了在离子液体Bmin[Cl]含量为10%、20%和30%时乙腈-水物系的汽液平衡数据。实验结果表明,离子液体Bmin[Cl] 可以提高乙腈对水的相对挥发度,离子液体Bmin[Cl]含量在20%以上时可以消除乙腈-水物系的共沸点。离子液体Bmin[Cl]可以用作分离乙腈-水物系的萃取剂。用改进的Furter方程对数据进行了关联,得到了离子液体Bmin[Cl]对乙腈-水物系的盐效应参数。     

乙醇-水-盐体系汽液平衡

用改进的Ｏｔｈｍｅｒ汽液平衡釜在０．１０１３ＭＰａ下测定了乙醇水氯化钙、醋酸钾体系在恒盐摩尔分率下的汽液平衡数据。用Ｆｕｒｔｅｒ方程、修正的Ｆｕｒｔｅｒ方程、拟二元模型及溶剂化模型对实验数据进行关联，取得良好结果，其中乙醇水氯化钙体系实验数据用修正的Ｆｕｒｔｅｒ方程关联，所得汽相平均偏差为０．０１２４。     

Measurement and correlation of excess enthalpies for water+ethanol+1-buthyl 3-methylimidaozolium tetrafluoroborate system

It is difficult to find physical properties data for systems containing ionic liquids, excess molar enthalpies, binary interaction parameter, etc. In this study, the excess molar enthalpies were measured for water+ethanol+ionic liquid system using a isothermal microcalorimeter at 298.15 K. The ionic liquid used was 1-butyl 3-methyl imidazolium tetrafluoroborate, [BMIM] [BF₄]. The isothermal microcalorimeter (IMC) is a flow-type calorimeter that measures the heat of mixing directly, using specific mixing cell. By employing NRTL, electrolyte-NRTL and UNIQUAC models, binary interaction parameters were determined and investigated for the correlation with vapor liquid equilibrium (VLE). The e-NRTL model with the partial dissociation was employed to correlate the ionic liquid system. The binary data of VLE system were used from literatures. Specifically, UNIQUAC volume and surface area parameters were determined using Bondi radius.     

Vapor Liquid Equilibria for Ionic Liquid/Ethanol/Water Systems and the Effect of Anion Hydrolysis

The performance of two tetrafluoroborate-based ionic liquids (ILs) as entrainers in the dehydration of water/ethanol azeotropic mixtures was evaluated. Isobaric vapor-liquid equilibrium (VLE) data were measured for the systems ethanol/water/1-butyl-3-methyl imidazolium tetrafluoroborate and ethanol/water /n-butylpyridinium tetrafluoroborate including the azeotropic region. VLE data for the ethanol/water, ethanol/IL, and water/IL binary mixtures were obtained at 100 kPa. The hydrolysis of the tetrafluoroborate anion was studied for both types of ILs by ¹⁹F NMR analysis. The hydrolysis of the tetrafluoroborate anion does not have much effect on the ethanol/water VLE. The ¹⁹F NMR analysis indicated that hydrolysis occurred at high mole fractions of water.     

Experimental results for the vapor–liquid equilibria of (formaldehyde+1,3,5-trioxane+methanol+salt+water) systems and comparison with predictions

The salt effect on the vapor–liquid phase equilibrium (VLE) of solvent mixtures is of significant interest in the industrial production of 1,3,5-trioxane. Experimental data for the VLE of quinary systems (formaldehyde + 1,3,5-trioxane + methanol + salt + water) and their ternary subsystems (formaldehyde+salt+water), (1,3,5-trioxane+salt+water), and (methanol+salt+water) were system-atic measured under atmospheric pressure. The salts considered included KBr, NaNO3, and CaCl2. The extended UNIFAC model was used to describe the VLE of the salt-containing reactive mixtures. The model parameters were determined from the experimental VLE data of ternary systems or obtained from the literature, and then were used to predict the VLE of systems (1,3,5-trioxane + KBr + water), (methanol+KBr+water), (formaldehyde+KBr+water), and (formaldehyde+1,3,5-trioxane+methanol+salt+water) with salt=KBr, NaNO3, and CaCl2. The predicted results showed good agreements with the measured results. Furthermore, the model was used to uncover the salt effect on the VLE of these multi-solvent reactive systems.     

COSMO-UNIFAC model for ionic liquids

The united chemical thermodynamic model, that is, COSMO-UNIFAC model was first extended to the systems containing ionic liquids (ILs). This model for ILs combines the respective advantages of COSMO-based (priori prediction) and UNIFAC (relatively accurate prediction) models. The comparison of the predicted values by COSMO-UNIFAC model with experimental data indicates that this model can provide a moderate quantitative prediction for the systems containing ILs when the UNIFAC model parameters are vacant.