Uniting bounded control and MPC for stabilization of constrained linear systems

In this work, a hybrid control scheme, uniting bounded control with model predictive control (MPC), is proposed for the stabilization of linear time-invariant systems with input constraints. The scheme is predicated upon the idea of switching between a model predictive controller, that minimizes a given performance objective subject to constraints, and a bounded controller, for which the region of constrained closed-loop stability is explicitly characterized. Switching laws, implemented by a logic-based supervisor that constantly monitors the plant, are derived to orchestrate the transition between the two controllers in a way that safeguards against any possible instability or infeasibility under MPC, reconciles the stability and optimality properties of both controllers, and guarantees asymptotic closed-loop stability for all initial conditions within the stability region of the bounded controller. The hybrid control scheme is shown to provide, irrespective of the chosen MPC formulation, a safety net for the practical implementation of MPC, for open-loop unstable plants, by providing a priori knowledge, through off-line computations, of a large set of initial conditions for which closed-loop stability is guaranteed. The implementation of the proposed approach is illustrated, through numerical simulations, for an exponentially unstable linear system.     

Model predictive control of switched nonlinear systems under average dwell-time

In this paper, we propose a model predictive control (MPC) algorithm for switched nonlinear systems under average dwell-time switching signals. Assuming that a stabilizing MPC controller exists for each of the subsystems, we show that recursive feasibility of the repeatedly solved optimal control problem and asymptotic stability of the closed-loop switched system can be established if a certain average dwell-time condition is satisfied. If the switching times are unknown a priori and cannot be detected instantly, the MPC controller calculated for the previously active subsystem might not be stabilizing for the newly activated subsystem, thus possibly leading to an unstable closed-loop system. It is shown that if the switches can be detected fast enough, then still ultimate boundedness in an arbitrarily small region around the origin can be ensured, i.e., the proposed MPC algorithm is inherently practically robust with respect to small errors in the detection of the switching times. Finally, we apply our results to a continuous stirred-tank reactor (CSTR) with two different modes of operation.     

Predictive control of switched nonlinear systems with scheduled mode transitions

In this work, a predictive control framework is proposed for the constrained stabilization of switched nonlinear systems that transit between their constituent modes at prescribed switching times. The main idea is to design a Lyapunov-based predictive controller for each constituent mode in which the switched system operates and incorporate constraints in the predictive controller design which upon satisfaction ensure that the prescribed transitions between the modes occur in a way that guarantees stability of the switched closed-loop system. This is achieved as follows: For each constituent mode, a Lyapunov-based model predictive controller (MPC) is designed, and an analytic bounded controller, using the same Lyapunov function, is used to explicitly characterize a set of initial conditions for which the MPC, irrespective of the controller parameters, is guaranteed to be feasible, and hence stabilizing. Then, constraints are incorporated in the MPC design which, upon satisfaction, ensure that: 1) the state of the closed-loop system, at the time of the transition, resides in the stability region of the mode that the system is switched into, and 2) the Lyapunov function for each mode is nonincreasing wherever the mode is reactivated, thereby guaranteeing stability. The proposed control method is demonstrated through application to a chemical process example.     

Distributed model predictive control of linear systems with persistent disturbances

This article presents a new form of robust distributed model predictive control (MPC) for multiple dynamically decoupled subsystems, in which distributed control agents exchange plans to achieve satisfaction of coupling constraints. The new method offers greater flexibility in communications than existing robust methods, and relaxes restrictions on the order in which distributed computations are performed. The local controllers use the concept of tube MPC – in which an optimisation designs a tube for the system to follow rather than a trajectory – to achieve robust feasibility and stability despite the presence of persistent, bounded disturbances. A methodical exploration of the trades between performance and communication is provided by numerical simulations of an example scenario. It is shown that at low levels of inter-agent communication, distributed MPC can obtain a lower closed-loop cost than that obtained by a centralised implementation. A further example shows that the flexibility in communications means the new algorithm has a relatively low susceptibility to the adverse effects of delays in computation and communication.     

Tube-based robust economic model predictive control

In this paper, we develop a tube-based economic MPC framework for nonlinear systems subject to unknown but bounded disturbances. Instead of simply transferring the design procedure of tube-based stabilizing MPC to an economic MPC framework, we rather propose to consider the influence of the disturbance explicitly within the design of the MPC controller, which can lead to an improved closed-loop average performance. This will be done by using a specifically defined integral stage cost, which is the key feature of our proposed robust economic MPC algorithm. Furthermore, we show that the algorithm enjoys similar properties as a nominal economic MPC algorithm (i.e., without disturbances), in particular with respect to bounds on the asymptotic average performance of the resulting closed-loop system, as well as stability and optimal steady-state operation.     

On hybrid systems and closed-loop MPC systems

The following five classes of hybrid systems were recently proven to be equivalent: linear complementarity, extended linear complementarity, mixed logical dynamical systems, piecewise affine systems and max-min-plus-scaling systems. Some of the equivalences were obtained under additional assumptions, such as boundedness of certain system variables. In this paper, for linear or hybrid plants in closed-loop with a model predictive control (MPC) controller based on a linear model fulfilling linear constraints on input and state variables and utilizing a quadratic cost criterion, we provide a simple and direct proof that the closed-loop system is a subclass of any of the former five classes of hybrid systems. This result is of extreme importance, as it opens up the use of tools developed for the mentioned hybrid model classes, such as (robust) stability and safety analysis tools, to study closed-loop properties of MPC     

MPC for tracking with optimal closed-loop performance

In the recent paper [Limon, D., Alvarado, I., Alamo, T., & Camacho, E.F. (2008). MPC for tracking of piece-wise constant references for constrained linear systems. Automatica, 44, 2382-2387], a novel predictive control technique for tracking changing target operating points has been proposed. Asymptotic stability of any admissible equilibrium point is achieved by adding an artificial steady state and input as decision variables, specializing the terminal conditions and adding an offset cost function to the functional.In this paper, the closed-loop performance of this controller is studied and it is demonstrated that the offset cost function plays an important role in the performance of the model predictive control (MPC) for tracking. Firstly, the controller formulation has been enhanced by considering a convex, positive definite and subdifferential function as the offset cost function. Then it is demonstrated that this formulation ensures convergence to an equilibrium point which minimizes the offset cost function. Thus, in case of target operation points which are not reachable steady states or inputs for the constrained system, the proposed control law steers the system to an admissible steady state (different to the target) which is optimal with relation to the offset cost function. Therefore, the offset cost function plays the role of a steady-state target optimizer which is built into the controller. On the other hand, optimal performance of the MPC for tracking is studied and it is demonstrated that under some conditions on both the offset and the terminal cost functions optimal closed-loop performance is locally achieved.     

A receding horizon control approach to sampled-data implementation of continuous-time controllers

We propose a novel way for sampled-data implementation (with the zero order hold assumption) of continuous-time controllers for general nonlinear systems. We assume that a continuous-time controller has been designed so that the continuous-time closed-loop satisfies all performance requirements. Then, we use this control law indirectly to compute numerically a sampled-data controller. Our approach exploits a model predictive control (MPC) strategy that minimizes the mismatch between the solutions of the sampled-data model and the continuous-time closed-loop model. We propose a control law and present conditions under which stability and sub-optimality of the closed loop can be proved. We only consider the case of unconstrained MPC. We show that the recent results in [G. Grimm, M.J. Messina, A.R. Teel, S. Tuna, Model predictive control: for want of a local control Lyapunov function, all is not lost, IEEE Trans. Automat. Control 2004, to appear] can be directly used for analysis of stability of our closed-loop system.     

On input-to-state stability of min–max nonlinear model predictive control

In this paper we consider discrete-time nonlinear systems that are affected, possibly simultaneously, by parametric uncertainties and other disturbance inputs. The min–max model predictive control (MPC) methodology is employed to obtain a controller that robustly steers the state of the system towards a desired equilibrium. The aim is to provide a priori sufficient conditions for robust stability of the resulting closed-loop system using the input-to-state stability (ISS) framework. First, we show that only input-to-state practical stability can be ensured in general for closed-loop min–max MPC systems; and we provide explicit bounds on the evolution of the closed-loop system state. Then, we derive new conditions for guaranteeing ISS of min–max MPC closed-loop systems, using a dual-mode approach. An example illustrates the presented theory.     

Robust output feedback model predictive control using off-line linear matrix inequalities

A fundamental question about model predictive control (MPC) is its robustness to model uncertainty. In this paper, we present a robust constrained output feedback MPC algorithm that can stabilize plants with both polytopic uncertainty and norm-bound uncertainty. The design procedure involves off-line design of a robust constrained state feedback MPC law and a state estimator using linear matrix inequalities (LMIs). Since we employ an off-line approach for the controller design which gives a sequence of explicit control laws, we are able to analyze the robust stabilizability of the combined control laws and estimator, and by adjusting the design parameters, guarantee robust stability of the closed-loop system in the presence of constraints. The algorithm is illustrated with two examples.     

A control matching model predictive control approach to string stable vehicle platooning

A predictive control strategy for vehicle platoons is presented in this paper, accommodating both string stability and constraints (e.g., physical and safety) satisfaction. In the proposed design procedure, the two objectives are achieved by matching a model predictive controller (MPC), enforcing constraints satisfaction, with a linear controller designed to guarantee string stability. The proposed approach neatly combines the straightforward design of a string stable controller in the frequency domain, where a considerable number of approaches have been proposed in literature, with the capability of an MPC-based controller enforcing state and input constraints.A controller obtained with the proposed design procedure is validated both in simulations and in the field test, showing how string stability and constraints satisfaction can be simultaneously achieved with a single controller. The operating region that the MPC controller is string stable is characterized by the interior of feasible set of the MPC controller.     

Optimal MPC for tracking of constrained linear systems

Model predictive control (MPC) is one of the few techniques which is able to handle constraints on both state and input of the plant. The admissible evolution and asymptotic convergence of the closed-loop system is ensured by means of suitable choice of the terminal cost and terminal constraint. However, most of the existing results on MPC are designed for a regulation problem. If the desired steady-state changes, the MPC controller must be redesigned to guarantee the feasibility of the optimisation problem, the admissible evolution as well as the asymptotic stability. Recently, a novel MPC has been proposed to ensure the feasibility of the optimisation problem, constraints satisfaction and asymptotic evolution of the system to any admissible target steady-state. A drawback of this controller is the loss of a desirable property of the MPC controllers: the local optimality property. In this article, a novel formulation of the MPC for tracking is proposed aimed to recover the optimality property maintaining all the properties of the original formulation.     

一类干扰有界约束非线性系统的鲁棒模型预测控制

针对一类干扰有界约束非线性系统设计了基于控制不变集切换策略的鲁棒模型预测控制算法.针对非线性系统线性化之后的结果,给出了平衡点的非线性标称系统控制不变集的计算方法.然后在考虑线性化误差和加性有界干扰影响的基础上,构造了平衡点附近最小鲁棒正不变集.结合不变集切换策略和Tube不变集控制方法,提出了干扰有界约束非线性系统的不变集切换策略.最后将该算法应用到一类典型的非线性化工过程连续搅拌反应釜(CSTR)中,仿真结果验证了算法的有效性.     

Predictive metamorphic control

In spite of its easy implementation, ability to handle constraints and nonlinearities, etc., model predictive control (MPC) does have drawbacks including tuning difficulties. In this paper, we propose a refinement to the basic MPC strategy by incorporating a tuning parameter such that one can move smoothly from an existing controller to a new MPC strategy. Each change of this tuning parameter leads to a new stabilising control law, therefore, allowing one to gradually move from an existing control law to a new and better one. For the infinite horizon case without constraints and for the general case with state and input constraints, stability results are established. We also examine the practical applicability of the proposed approach by employing it in the nominal prediction model of the tube-based output feedback robust MPC method. The merits of the proposed method are illustrated by examples.     

Model predictive control with robust feasibility

This paper presents a new model predictive control (MPC) method that provides robust feasibility with tractable, real-time computation. The method optimizes the closed-loop system dynamics, which involves models of the process (with parametric uncertainty) and controller at each step in the prediction horizon. Such problems are often formulated as a multi-stage stochastic program that suffers from the curse of dimensionality. This paper presents an alternative formulation that yields a bilevel stochastic optimization problem that is transformed by a series of reformulation steps into a tractable problem such that it can be solved through a limited number of second order cone programming sub-problems. The method addresses robust feasibility, manipulated saturation, state and output soft constraints, exogenous and endogenous uncertainty, and uncertainty in the state estimation in an integrated manner. Case study results demonstrate the advantages of the proposed robust MPC over nominal MPC and several other robust MPC formulations.     

基于神经网络与多模型的非线性自适应广义预测解耦控制

针对一类非线性多变量离散时间动态系统,提出了基于神经网络与多模型的非线性自适应广义预测解耦控制方法.该控制方法由线性鲁棒广义预测解耦控制器和神经网络非线性广义预测解耦控制器以及切换机构组成.线性鲁棒广义预测解耦控制器用于保证闭环系统输入输出信号有界,神经网络非线性广义预测解耦控制器能够改善系统性能.切换策略通过对上述两种控制器的切换,保证系统稳定的同时,改善系统性能.同时本文给出了所提自适应解耦控制方法的稳定性和收敛性分析.最后,通过仿真实例验证了该方法的有效性.     

基于神经网络与多模型的非线性自适应广义预测控制

针对一类不确定非线性离散时间动态系统, 提出了基于神经网络与多模型的非线性广义预测自适应控制方法. 该自适应控制方法由线性鲁棒广义预测自适应控制器, 神经网络非线性广义预测自适应控制器和切换机制三部分构成. 线性鲁棒广义预测自适应控制器保证闭环系统的输入输出信号有界, 神经网络非线性广义预测自适应控制器能够改善系统的性能. 切换策略通过对上述两种控制器的切换, 保证系统稳定的同时, 改善系统性能. 给出了所提自适应方法的稳定性和收敛性分析. 最后通过仿真实例验证了所提方法的有效性.     

Design of networked control systems with bounded arbitrary time delays

This paper is mainly concerned with the model predictive control (MPC) of networked control systems (NCSs) with uncertain time delay and data packets disorder. The network-induced time delay is described as bounded and arbitrary process. For the usual state feedback controller, by considering all the possibilities of delays, an augmented state space model of the closed-loop system, which characterizes all the delay cases, is obtained. The stability conditions are given according to the Lyapunov method based on this augmented model. The stability property is inherited in MPC which explicitly considers the physical constraints. A numerical example is given to demonstrate the effectiveness of the proposed MPC.