Study of bio-oil and bio-char production from algae by slow pyrolysis

This study examined bio-oil and bio-char fuel produced from Spirulina Sp. by slow pyrolysis. A thermogravimetric analyser (TGA) was used to investigate the pyrolytic characteristics and essential components of algae. It was found that the temperature for the maximum degradation, 322 °C, is lower than that of other biomass. With our fixed-bed reactor, 125 g of dried Spirulina Sp. algae was fed under a nitrogen atmosphere until the temperature reached a set temperature between 450 and 600 °C. It was found that the suitable temperature to obtain bio-char and bio-oil were at approximately 500 and 550 °C respectively. The bio-oil components were identified by a gas chromatography/mass spectrometry (GC–MS). The saturated functional carbon of the bio-oil was in a range of heavy naphtha, kerosene and diesel oil. The energy consumption ratio (ECR) of bio-oil and bio-char was calculated, and the net energy output was positive. The ECR had an average value of 0.49.     

Production and detailed characterization of bio-oil from fast pyrolysis of palm kernel shell

Bio-oil has been produced from palm kernel shell in a fluidized bed reactor. The process conditions were optimized and the detailed characteristics of bio-oil were carried out. The higher feeding rate and higher gas flow rate attributed to higher bio-oil yield. The maximum mass fraction of biomass (57%) converted to bio-oil at 550 °C when 2 L min⁻¹ of gas and 10 g min⁻¹ of biomass were fed. The bio-oil produced up to 500 °C existed in two distinct phases, while it formed one homogeneous phase when it was produced above 500 °C. The higher heating value of bio-oil produced at 550 °C was found to be 23.48 MJ kg⁻¹. As GC–MS data shows, the area ratio of phenol is the maximum among the area ratio of identified compounds in 550 °C bio-oil. The UV–Fluorescence absorption, which is the indication of aromatic content, is also the highest in 550 °C bio-oil.     

Catalytic hydropyrolysis of crop straws with different biochemical composition

In this study, four kinds of straws with different biochemical compositions, including soybean straw (SS), peanut straw (PS), rice straw (RS), and corn straw (CS), were subjected to catalytic hydropyrolysis (HyPy) to explore the influence of biochemical composition on the products distribution and properties of the pyrolysis oil. The HyPy reactions were performed at 400 °C for 2 h with added 10 wt% Pd/C and 4 MPa H₂. During the HyPy, hydrogen and catalyst broke the coating structure and hydrogen bond between cellulose (CL) and hemicellulose (HCL), and thus significantly weakened the biochemical composition effect on the yield and elemental composition of the bio-oil. The bio-oil yield varied between 11.75 wt% and 13.05 wt%, and the C, H, N, O, and S content fell into the following ranges of 82.06–85.15 wt%, 9.24–9.61 wt%, 1.18–1.43 wt%, 4.62–7.86 wt%, 45–130 ppm, respectively. Biochemical composition of straw, especially the mass ratio of CL to HCL (m_CL/m_HCL), markedly influenced the molecular composition of the bio-oil. Hydrocarbons (20.15–46.66%) and phenolic compounds (17.01–47.98%) accounted for the vast majority of the identified compounds. SS and PS with higher m_CL/m_HCL (1.92 and 1.80, respectively) tended to produce bio-oils with more aromatics (22.63% and 20.70%, respectively) and fewer phenolic compounds (17.01% and 22.56%, respectively).     

Comparison of pyrolysis and hydrothermal liquefaction of Chlamydomonas reinhardtii. Growth studies on the recovered hydrothermal aqueous phase

The production of bio-oil by pyrolysis with a high heating rate (500 K s⁻¹) and hydrothermal liquefaction (HTL) of Chlamydomonas reinhardtii was compared. HTL led to bio-oil yield decreasing from 67% mass fraction at 220 °C to 59% mass fraction at 310 °C whereas the bio-oil yield increased from 53% mass fraction at 400 °C to 60% mass fraction at 550 °C for pyrolysis. Energy ratios (energy produced in the form of bio-oil divided by the energy content of the initial microalgae) between 66% at 220 °C and 90% at 310 °C in HTL were obtained whereas it was in the range 73–83% at 400–550 °C for pyrolysis. The Higher Heating Value of the HTL bio-oil was increasing with the temperature while it was constant for pyrolysis. Microalgae cultivation in aqueous phase produced by HTL was also investigated and showed promising results.     

Pyrolysis of Alternanthera philoxeroides (alligator weed): Effect of pyrolysis parameter on product yield and characterization of liquid product and bio char

In the present work, fast pyrolysis of Alternanthera philoxeroides was evaluated with a focus to study the chemical and physical characteristics of bio-oil produced and to determine its practicability as a transportation fuel. Pyrolysis of A.philoxeroides was conducted inside a semi batch quartz glass reactor to determine the effect of different operating conditions on the pyrolysis product yield. The thermal pyrolysis of A. philoxeroides were performed at a temperature range from 350 to 550 °C at a constant heating rate of 25 °C/min & under nitrogen atmosphere at a flow rate of 0.1 L/min, which yielded a total 40.10 wt.% of bio-oil at 450 °C. Later, some more sets of experiments were also performed to see the effect on pyrolysis product yield with change in operating conditions like varying heating rates (50 °C/min, 75 °C/min & 100 °C/min) and different flow rates of nitrogen (0.2, 0.3, 0.4 & 0.5 L/min). The yield of bio-oil during different heating rate (25, 50, 75 and 100 °C/min) was found to be more (43.15 wt.%) at a constant heating rate of 50 °C/min with 0.2 L/min N₂ gas flow rate and at a fixed pyrolysis temperature of 450 °C. The High Heating Value (HHV) value of bio-oil (8.88 MJ/kg) was very less due to presence of oxygen in the biomass. However, the high heating value of bio-char (20.41 MJ/kg) was more, and has the potential to be used as a solid fuel. The thermal degradation of A. philoxeroides was studied in TGA under inert atmosphere. The characterization of bio-oil was done by elemental analyser (CHNS/O analyser), FT-IR, & GC/MS. The char was characterized by elemental analyser (CHNS/O analysis), SEM, BET and FT-IR techniques. The chemical characterization showed that the bio-oil could be used as a transportation fuel if upgraded or blended with other fuels. The bio-oil can also be used as feedstock for different chemicals. The bio-char obtained from A. philoxeroides can be used for adsorption purposes because of its high surface area.     

Effect of fractional condensers on characteristics,compounds distribution and phenols selection of bio-oil from pine sawdust fast pyrolysis

Bio-oil is a multicomponent mixture of more than 400 types of organic compounds, with high water content. Fractionation of bio-oil may be a more efficient approach for primary separation of bio-oil. In this work, to better understand the effect of fractional condensers on bio-oil yield, physicochemical characteristics, compounds distribution and phenols selection during biomass fast pyrolysis process, a semi-automatic controlled fluidized bed reactor biomass fast pyrolysis system with four-stage condensers was developed. Average temperatures of Condensers 1, 2, 3, 4 were 32.39 °C, 26.74 °C, 24.06 °C and 23.68 °C, respectively. And the bio-oil yields of Condenser 1, 2, 3, and 4 were 26.82%, 7.31%, 1.48% and 9.69%, respectively. Bio-oil collected from Condenser 4 had the lowest water content (9.68 wt%), the lowest acidity (pH = 3.67), and the highest HHV (29.2 MJ/kg). The highest relative contents of compounds collected from Condenser 1, 2, 3 and 4 were 1-(4-hydroxy-3-methoxyphenyl)-2-Propanone (6.95%), trans-Isoeugenol (6.63%), Creosol (5.28%), and trans-Isoeugenol (6.69%), respectively. Fractional condensers affected the compounds distribution, but it has a stronger effect on relative heavy compounds (molar mass > 250) and a weaker effect on relative light compounds (molar mass < 200). Fractional condensers were more conducive to the selection of phenols with relative yield of more than 30%. Phenols, acids and furfurans tended to distribute at higher temperature, while alcohols, ethers and hydrocarbons tended to distribute at relative lower temperature, but the difference was small. The research has provided a reference for the production of bio-oil.     

Low energy consumption and high quality bio-fuels production via in-situ fast pyrolysis of reed straw by adding metallic particles in an induction heating reactor

An in-situ fast pyrolysis of biomass by adding metallic particles in an induction heating reactor was proposed to produce high quality bio-fuels. After adding metallic particles into biomass, the times required to reach complete pyrolysis during reed straw pyrolysis process were significantly reduced up to 28.9%. The yields of combustible gas and bio-oil products were significantly increased. Furthermore, higher-quality combustible gas and bio-oil products were obtained with the LHV of gas products and HHV of bio-oil (dry basis) increased by 14.2%–19.1% and 4.16%–16.35%, respectively, under 400–600 °C. The lower oxygen content and higher yields of aromatics, alkenes and alkanes contents in bio-oil were obtained after metallic particles addition. More importantly, up to 26.5% of the total energy consumption during pyrolysis process was reduced after adding metallic particles into biomass in an induction heating reactor. The results indicate that adding metallic particles into biomass in an induction heating reactor can significantly enhance the heat transfer, decomposition reaction intensity and energy utilization efficiency of biomass pyrolysis process with lower energy consumption and higher-quality bio-fuel production.     

Hydrothermal liquefaction of macroalgae: Influence of zeolites based catalyst on products

Hydrothermal liquefaction (HTL) of Ulva prolifera macroalgae (UP) was carried out in the presence of three zeolites based catalysts (ZSM-5, Y-Zeolite and Mordenite) with the different weight percentage (10–20 wt%) at 260–300 °C for 15–45 min. A comparison between non-catalytic and catalytic behavior of ZSM-5, Y-Zeolite, and Mordenite in the conversion of Ulva prolifera showed that is affected by properties of zeolites. Maximum bio-oil yield for non-catalytic liquefaction was 16.6 wt% at 280 °C for 15 min. The bio-oil yield increased to 29.3 wt% with ZSM-5 catalyst (15.0 wt%) at 280 °C. The chemical components and functional groups present in the bio-oils are identified by GC-MS, FT-IR, ¹H-NMR, and elemental analysis techniques. Higher heating value (HHV) of bio-oil (32.2–34.8 MJ/kg) obtained when catalyst was used compared to the non-catalytic reaction (21.2 MJ/kg). The higher de-oxygenation occurred in the case of ZSM-5 catalytic liquefaction reaction compared to the other catalyst such as Y-zeolite and mordenite. The maximum percentage of the aromatic proton was observed in bio-oil of ZSM-5 (29.7%) catalyzed reaction and minimum (1.4%) was observed in the non-catalyst reaction bio-oil. The use of zeolites catalyst during the liquefaction, the oxygen content in the bio-oil reduced to 17.7%. Aqueous phase analysis exposed that presence of valuables nutrients.     

A comparative study on the quality of bioproducts derived from catalytic pyrolysis of green microalgae Spirulina (Arthrospira) plantensis over transition metals supported on HMS-ZSM5 composite

This study investigated three different types of catalysts: Ni/HMS-ZSM5, Fe/HMS-ZSM5, and Ce/HMS-ZSM5 in the thermochemical decomposition of green microalgae Spirulina (Arthrospira) plantensis. First, non-catalytic pyrolysis tests were conducted in a temperature ranges of 400–700 °C in a dual-bed pyrolysis reactor. The optimum temperature for maximized liquid yield was determined as 500 °C. Then, the influence of acid washing on bio-products upgrading was studied at the optimum temperature. Compared to the product yields from the pyrolysis of raw spirulina, a higher bio-oil yield (from 34.488 to 37.778 %wt.) and a lower bio-char yield (from 37 to 35 %wt.) were observed for pretreated spirulina, indicating that pretreatment promoted the formation of bio-oil, while it inhibited the formation of biochar from biomass pyrolysis. Finally, catalytic pyrolysis experiments of pretreated-spirulina resulted that Fe as an active phase in catalyst exhibited excellent catalytic activity, toward producing hydrocarbons and the highest hydrogen yield (3.81 mmol/gr spirulina).     

酸洗预处理对生物质热解焦物理化学特性的影响

选用松木、杨木、玉米秸秆和稻壳4种生物质为原料,采用3%（体积分数）乙酸溶液进行洗涤除灰后,进行快速热解实验,对比研究酸洗预处理对4种生物质热解焦物理化学特性的影响。结果表明：乙酸酸洗可有效去除松木、杨木、玉米秸秆和稻壳灰分中的大部分无机元素,从而促进热解过程中挥发分的释放、显著改善热解焦的表面化学特性。酸洗可促进热解焦孔隙结构的形成,提高比表面积和总孔容积,但会使平均孔径减小,这表明酸洗主要提高微孔率,对微孔的形成有较大的促进作用。同时,酸洗使得更多的含氧官能团保留在生物质热解焦表面,这种影响对玉米秸秆和稻壳尤为明显。气化焦油的吸附实验结果表明酸洗后热解焦的吸附能力有所增加。     

Insights into biological delignification of rice straw by Trametes hirsuta and Myrothecium roridum and comparison of saccharification yields with dilute acid pretreatment

Rice straw is the most abundant agricultural residue on a global scale and is widely available as feedstock for cellulosic fuel production. However, it is highly recalcitrant to biochemical deconstruction and also generates inhibitors that affect enzymatic saccharification. Rice straw from eastern Arkansas was subjected to dilute acid pretreatment (160 °C, 48 min and 1.0% sulfuric acid) and solid-state fermentation with two lignocellulolytic fungi, Trametes hirsuta and Myrothecium roridum, and their saccharification efficacies were compared. T. hirsuta and M. roridum were tested separately; pretreatment of rice straw with either strain for seven days resulted in 19 and 70% enrichment of its holocellulose content, respectively. However, liquid chromatography analysis of the alkali extracts showed significant differences in cell wall degradation by T. hirsuta and M. roridum. T. hirsuta removed 15% more phenolic compounds and 38% more glucan than M. roridum, while M. roridum removed 77% more xylan than T. hirsuta. Fungal and dilute acid pretreated biomass was then hydrolyzed using Accellerase^® 1500, a saccharification cocktail. Saccharification efficiency of M. roridum was 37% higher than that of dilute acid pretreatment of rice straw, requiring 8% lower enzyme loading and 50% shorter enzymatic hydrolysis duration. Alkali extraction of fungal pretreated biomass also yielded 10–15 g kg⁻¹ of acid precipitable polymeric lignin (APPL), which is a valuable co-product for biorefineries. In comparison to dilute acid pretreatment, fungal pretreatment could be a cost-effective alternative for the degradation of recalcitrant biomass, such as rice straw.     

The physicochemical properties of different biomass ashes at different ashing temperature

There are no specific standards for biomass ash analysis in China, so the standards for coal ash analysis are usually used to determine the property of biomass ash. Three kinds of biomass including rice straw, pine sawdust and Chinese Parasol Tree leaf burned at 815 °C, 600 °C and 500 °C respectively corresponding to the temperature required in the standard of GB and ASTM. The ash content and composition were analyzed. Based on the ash composition results, the volatilization of alkali oxides in biomass ash and slagging/fouling problems related to biomass thermochemical conversion were investigated. The alkali metals were relatively more volatile with the increasing of ashing temperature. The crystalline phase composition and surface morphology characteristics of the ash particles were investigated by XRD and SEM analysis. The increasing ashing temperature resulted in the decreasing of the diffraction intensities of metal salts and the increasing of the diffraction intensities of silicon compound. Ash fusion temperatures were measured by 5E-AFII Ash Fusion Analyzer. The results indicated that the ash content, composition, crystalline phases composition, surface morphology and ash fusibility were all closely related to ashing temperatures. The analysis at 600 °C ashing temperature was regarded as the optimal for an exact determination of ash properties.     

Valorisation of lignocellulosic biomass investigating different pyrolysis temperatures

Presently, sugarcane bagasse (SB) and oat hulls (OH) have a distinctive potential as a renewable source of biomass, due to its global availability, which is advantageous for producing liquid and gaseous fuels by thermochemical processes. Thermo-Catalytic Reforming (TCR) is a pyrolysis based technology for generating energy vectors (char, bio-oil and syngas) from biomass wastes. This work aims to study the conversion of SB and OH into fuels, using TCR in a 2 kg/h continuous pilot-scale reactor at different pyrolysis temperatures. The pyrolysis temperatures were studied at 400, 450 and 500 °C, while the subsequent reforming temperature remained constant at 500 °C. The bio-oil contained the highest calorific value of 33.4 and 33.5 MJ/kg for SB and OH, respectively at 500 °C pyrolysis temperature, which represented a notable increase compared to the raw material calorific value of SB and OH (16.4 and 16.0 MJ/kg, respectively), this was the result of deoxygenation reactions occurring. Furthermore, the increment of the pyrolysis temperature improved the water content, total acid number (TAN), viscosity and density of the bio-oil. The syngas and the biochar properties did not change significantly with the increase of the pyrolysis temperature. In order to use TCR bio-oil as an engine fuel, it is necessary to carry out some upgrading treatments; or blend it with fossil fuels if it is to be used as a transportation fuel. Overall, TCR is a promising future route for the valorisation of lignocellulosic residues to produce energy vectors.     

Pyrolysis of Xanthium strumarium in a fixed bed reactor: Effects of boron catalysts and pyrolysis parameters on product yields and character

Pyrolysis of Xanthium strumarium has been performed in a fixed-bed tubular reactor with boron minerals (ulexite, colemanite, and borax) and without catalyst at three different temperatures ranging from 350°C to 550°C with heating rate of 50°C/min. The amounts of bio-oil, bio-char, and gas generated, also the compositions of the resulting bio-oils were identified by GC-MS and FT-IR. The influences of pyrolysis parameters, such as temperature and catalyst on product yields were investigated. Temperature and catalyst were found to be the main factors affecting the conversion of Xanthium strumarium into solid, liquid, and gaseous products. The highest liquid yield (27.97%) including water was obtained with 10% colemanite (Ca₂B₆O₁₁.5H₂O) catalyst at 550°C temperature at a heating rate of 50°C/min when 0.224 > D_p > 0.150 mm particle size raw material and 100 cm³/min of sweeping gas flow rate were used.     

Non-catalytic and catalytic pyrolysis of Ulva prolifera macroalgae for production of quality bio-oil

Pyrolysis of Ulva prolifera macroalgae (UM), an aquatic biomass, was carried out in a fixed-bed reactor in the presence of three zeolites based catalysts (ZSM-5, Y-Zeolite and Mordenite) with the different catalyst to biomass ratio. A comparison between non-catalytic and catalytic behavior of ZSM-5, Y-Zeolite and Mordenite catalyst in the conversion of UM showed that is affected by properties of zeolites. Bio-oil yield was increased in the presence of Y-Zeolite while decreased with ZSM-5 and Mordenite catalyst. Maximum bio-oil yield for non-catalytic pyrolysis was (38.5 wt%) and with Y-Zeolite catalyst (41.3 wt%) was obtained at 400 °C respectively. All catalyst showed a higher gas yield. The higher gas yield might be attributed to that catalytic pyrolysis did the secondary cracking of pyrolytic volatiles and promoted the larger small molecules. The chemical components and functional groups present in the pyrolytic bio-oils are identified by GC–MS, FT-IR, ¹H-NMR and elemental analysis techniques. Phenol observed very less percentage in the case of non-catalytic pyrolysis bio-oil (9.9%), whereas catalytic pyrolysis bio-oil showed a higher percentage (16.1%). The higher amount of oxygen present in raw biomass reduced significantly when used catalyst due to the oxygen reacts with carbon and produce (CO and CO₂) and water.     

Optimization study of sub/supercritical water liquefication of lignite: Fast liquefaction for high bio-oil yield

Sub/supercritical water liquefication (SCWL) is a water-based thermochemical technology as well as an environmentally friendly treatment by converting wet feedstock into bioenergy. In the present study, a systematic investigation of SCWL of lignite was carried out covering a temperature range between 320 and 440 °C when residence time increased from 5 min to 40 min. The highest bio-oil oil yield of 34.3% with solid residue of 52.7% was obtained at 440 °C for 5 min. Phenol derivatives, carboxylic acids, long chain hydrocarbons, ketones, and naphthalene were the main bio-oil composition through FTIR and GC-MS analysis. Gas yields and their exact compositions were also determined and CO₂ was the dominate gas product but the percentage of CH₄ became significant at severe SCWL conditions. A conclusion was drawn that fast liquefaction (e.g. 5 min) at relative higher temperature (e.g. 400 °C) which avoid excessive gasification and repolymerization reactions was an optimization strategy for high yield bio-oil production from SCWL of lignite.     

Effect of mineral matter removal on pyrolysis of wood sawdust from an invasive species

Kinetics of the pyrolysis of wood sawdust from the invasive species Parkinsonia aculeata, untreated and demineralized by a mild acid treatment, is comparatively investigated in order to examine the effect of the removal of minerals naturally present in the biomass. Non-isothermal thermogravimetric analysis from room temperature up to 500°C is applied for this purpose. Demineralization shifts the process onset and the maximum degradation rate to higher temperatures, and leads to enhance the activation energy from 56 to 60 kJ mol^–1, pointing to a catalytic role of alkaline and alkaline earth metals in the biomass. Likewise, the three kinds of pyrolysis products (gas, bio-char, and bio-oil) are obtained from experiments performed in a bench-scale installation at 500°C. Yields and physicochemical characteristics of the pyrolysis products are determined. The pronounced reduction in the content of metals in the sawdust leads to increase bio-oil yield in around 10%, the specific surface area of the bio-char, from ≈ 2 to ≈ 74 m² g^–1, and the higher heating value of all the pyrolysis products.     

Thermo-chemical conversion of waste rubber seed shell to produce fuel and value-added chemicals

Rubber seed shell (RSS), comprises of 96.67 wt% organic content and 38.6% crystallinity index, was used for the production of biofuel and value-added chemicals through semi-batch pyrolysis. Thermogravimetric analysis (TGA) of RSS at heating rate of 20 °C/min showed R50 value as 12.72%/min at 376.5 °C. The gaseous product evolved during the decomposition of RSS were analyzed through inline Fourier transform infrared (FT-IR) coupled with TGA instrument. The effects of pyrolysis temperatures (350°C-600 °C) and heating rates (10°C/min–40 °C/min) on the product distribution (liquid, gas and bio-char) were investigated. The maximum yield of liquid product (46.14 wt%) and the carbon-rich bio-char (31.92 wt%) were obtained at 550 °C temperature for heating rate of 30 °C/min. The fuel characteristics of produced bio-char such as higher calorific value (34.5 MJ/kg), higher fixed carbon (79.74 wt%), lower ash (1.87 wt%) and lower moisture content (2.11 wt%) suggested its potential to be used as solid fuel. Value-added organic compounds such as acetic acid, phenolic compounds, creosol, pilocarpine, benzene and levoglucosan were identified in the liquid product using gas chromatography. The pH values of liquid products (2.55–3.0) support the presence of organic acids and phenolic fraction. The presence of various functional groups was also identified using FT-IR spectroscopy. In depth analysis of physico-chemical-thermal properties of RSS and obtained products (liquid and bio-char) suggested that RSS can be considered as a suitable feedstock for the production of value added chemicals including fuel.     

Characterization of hydrocarbonaceous liquid and solid products derived from thermal defragmentation of Cissus quadrangularis Linn in a fixed bed pyrolysis

Utilization of Cissus quadrangularis Linn (CQ) for producing hydrocarbonaceous bio-oil and biochar in a fixed bed pyrolysis at 550°C was studied. Rapid and progressive thermal decompositions took place between 220 and 550°C. Elemental composition of the biomass shows 12.32% moisture and 67.97% volatiles. Spectroscopic and chromatographic analysis of bio-oil having a calorific value of 26.58 MJ/kg elucidates 15 different chemicals of different functional groups. Two major chemicals (ethanol, pentamethyl, and benzedrex) dominate at around 60% of the chemicals identified in the bio-oil. Biochar could be a possible source of activated carbon for suntan lotion producing industries.     

Potentiality of combined catalyst for high quality bio-oil production from catalytic pyrolysis of pinewood using an analytical Py-GC/MS and fixed bed reactor

The aim of this study was to investigate the potential of combined catalyst (ZSM-5 and CaO) for high quality bio-oil production from the catalytic pyrolysis of pinewood sawdust that was performed in Py-GC/MS and fixed bed reactor at 500 °C. In Py-GC/MS, the maximum yield of aromatic hydrocarbon was 36 wt% at biomass to combined catalyst ratio of 1:4 where the mass ratio of ZSM-5 to CaO in the combined catalyst was 4:1. An increasing trend of phenolic compounds was observed with an increasing amount of CaO, whereas the highest yield of phenolic compounds (31 wt%) was recorded at biomass to combined catalyst ratio of 1:4 (ZSM-5: CaO - 4:1). Large molecule compounds could be found to crack into small molecules over CaO and then undergo further reactions over zeolites. The water content, higher heating value, and acidity of bio-oil from the fixed bed reactor were 21%, 24.27 MJkg⁻¹, and 4.1, respectively, which indicates that the quality of obtained bio-oil meets the liquid biofuel standard ASTM D7544-12 for grade G biofuel. This research will provide a significant reference to produce a high-quality bio-oil from the catalytic pyrolysis of woody biomass over the combined catalyst at different mass ratios of biomass to catalyst.