Discrete time output feedback sliding mode tracking control for systems with uncertainties

This paper describes a method for designing discrete time static output feedback sliding mode tracking controllers for uncertain systems that are not necessarily minimum phase or of relative degree one. In this work, a procedure for realizing discrete time controllers via a particular set of extended outputs is presented for systems with uncertainties. The conditions for existence of a sliding manifold guaranteeing a stable sliding motion are given. A procedure to synthesize a control law that minimizes the effect of the disturbance on the sliding mode dynamics and the augmented outputs is given. The proposed control law is then applied to a benchmark aircraft problem taken from the literature that represents the lateral dynamics of a F‐14 aircraft under powered approach. Copyright © 2013 John Wiley & Sons, Ltd.     

Aero‐Engine DCS Fault‐Tolerant Control with Markov Time Delay Based On Augmented Adaptive Sliding Mode Observer

With a focus on aero‐engine distributed control systems (DCSs) with Markov time delay, unknown input disturbance, and sensor and actuator simultaneous faults, a combined fault tolerant algorithm based on the adaptive sliding mode observer is studied. First, an uncertain augmented model of distributed control system is established under the condition of simultaneous sensor and actuator faults, which also considers the influence of the output disturbances. Second, an augmented adaptive sliding mode observer is designed and the linear matrix inequality (LMI) form stability condition of the combined closed‐loop system is deduced. Third, a robust sliding mode fault tolerant controller is designed based on fault estimation of the sliding mode observer, where the theory of predictive control is adopted to suppress the influence of random time delay on system stability. Simulation results indicate that the proposed sliding mode fault tolerant controller can be very effective despite the existence of faults and output disturbances, and is suitable for the simultaneous sensor and actuator faults condition.     

Novel sliding mode control for multi‐input–multi‐output discrete‐time system with disturbance

This paper investigates sliding mode control for multi‐input–multi‐output discrete‐time system with disturbances. First of all, a novel nonlinear sliding surface, named as hyperbolic hybrid switching sliding surface, is proposed. Two different types of hyperbolic functions are introduced into the proposed sliding surface. Due to the changing of values of the hyperbolic functions, sliding surface switching occurs during the control process, which ensures that both settling time and overshoot can be decreased. The sliding mode controller is obtained based on a novel nonlinear reaching law. The nonlinear reaching law contains several parameters, and by properly designing these parameters, we can decrease the bounds of the sliding variables to small values. The stability analysis of the sliding motion is carried out from singular system viewpoint. Finally, simulation examples and comparison examples are presented to illustrate that the system performance is improved obviously by proposed novel sliding mode control, and the system is robust to the disturbances.     

Adaptive sliding mode control for plants with mismatched perturbations to achieve asymptotical stability

In this paper an adaptive sliding mode control (ASMC) scheme based on the Lyapunov stability theorem is proposed for a class of multi‐input multi‐output (MIMO) systems with mismatched perturbations to solve robust tracking problems. Adaptive mechanisms are employed in the design of a specific sliding surface function, so that when the dynamics of controlled system enters the sliding surface, the adaptive gains are capable of adapting the upper bounds of mismatched perturbations and the trajectories of tracking errors can achieve the objective of asymptotical stability. Some adaptive mechanisms are also employed in the controller's design, so that the reaching phase can be accomplished in a finite time without the requirement of the information of upper bounds of partial mismatched perturbations. Finally the control scheme is applied to control an AC motor for showing the feasibility of the proposed methodology. Copyright © 2006 John Wiley & Sons, Ltd.     

On an output‐feedback stabilization problem with uncertainty in the relative degree

This paper deals with an output‐feedback finite‐time control problem for a class of nonlinear uncertain systems whose relative degree is affected by an uncertain system parameter and is therefore unknown at the stage of control design. We show that an existing second‐order sliding mode control algorithm can address successfully the control task of a finite‐time output‐feedback stabilization when the uncertain relative degree is equal to 1 or 2. We derive constructive tuning rules for the control parameters and show its effectiveness by using computer simulations. Copyright © 2007 John Wiley & Sons, Ltd.     

Impulsive second‐order sliding mode control in reduced information environment

The perturbed system with input‐output dynamics of arbitrary and well‐defined relative degree is considered in a reduced information environment. A novel impulsive second‐order sliding mode control in the reduced information environment is proposed. The almost instantaneous convergence to the origin is achieved via impulsive control acting in a concert with second‐order sliding mode control, specifically supertwisting and twisting algorithms. The impulsive actions are implemented in a piecewise constant format. Numerical examples illustrate the efficiency of the proposed control algorithms.     

SECOND‐ORDER NONSINGULAR TERMINAL SLIDING MODE DECOMPOSED CONTROL OF UNCERTAIN MULTIVARIABLE SYSTEMS

This paper proposes a second‐order nonsingular terminal sliding mode decomposed control method for multivariable linear systems with internal parameter uncertainties and external disturbances. First, the systems are converted into the block controllable form, consisting of an input‐output subsystem and a stable internal dynamic subsystem. A special second‐order non‐singular terminal sliding mode is proposed for the input‐output subsystem. The control law is designed to drive the states of the input‐output subsystem to converge to the equilibrium point asymptotically. Then the states of the stable zero‐dynamics of the system converge to the equilibrium point asymptotically. The method proposed in the paper has advantages for higher‐dimensional multivariable systems, in the sense that it simplifies the design and makes it possible to realize a robust decomposed control. Meanwhile, because of the adoption of the second‐order sliding mode, the control signal is continuous. Simulation results are presented to validate the design.     

Dynamic output feedback sliding mode control for nonminimum phase linear systems with disturbance attenuation

A sliding mode control algorithm using output information only is developed in this paper for a linear system with mismatched disturbance. The nominal system is allowed to be nonminimum phase. A scheme designed to combine the output‐dependent integral sliding surface with a reduced‐order observer is proposed. Utilizing an H_∞ control analytical technique, once the system is in the sliding mode, the proposed algorithm can guarantee robust stabilization and sustain the nature of performing disturbance attenuation when the solution to one algebraic Riccati inequality can be found. A controller is designed to satisfy the reaching and sliding condition in line with the reduced‐order observer. Finally, a numerical example is explained to show the applicability of the proposed scheme. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Continuous sliding‐mode control for singular systems

Singular systems with matched Lipschitz perturbations and uncertainties are considered in this paper. Since continuous solutions of an impulse‐free singular system require continuous input signals, a two‐step continuous sliding‐mode control strategy to compensate matched Lipschitz perturbations and uncertainties in singular systems is proposed. Our suggested methodology is tested in a singular representation of a DC motor pendulum of relative degree two. The performance of the proposed strategy is assessed by comparing the accuracy, in both cases, with and without considering small noise in the output, obtained through other continuous sliding‐mode control, and reconstruction/compensation of perturbations and uncertainties techniques.     

Sliding mode control of boost and buck‐boost power converters using the dynamic sliding manifold

Non‐minimum phase tracking control is studied for boost and buck‐boost power converters. A sliding mode control algorithm is developed to track directly a causal voltage tracking profile given by an exogenous system. The approximate causal output non‐minimum phase asymptotic tracking in non‐linear boost and buck‐boost power converters is addressed via sliding mode control using a dynamic sliding manifold (DSM). Use of DSM allows the stabilization of the internal dynamics when the output tracking error tends asymptotically to zero in the sliding mode. The sliding mode controller with DSM links features of conventional sliding mode control (insensitivity to matched non‐linearities and disturbances) and a conventional dynamic compensator (accommodation to unmatched disturbances). Numerical examples demonstrate the effectiveness of the sliding mode controller even for a known time‐varying load. Copyright © 2003 John Wiley & Sons, Ltd.     

UNIVERSAL OUTPUT‐FEEDBACK SISO CONTROLLERS

It is proved in the paper that practically all known higher‐order sliding controllers can be combined with recently developed 2‐sliding‐mode‐based differentiators yielding universal output‐feedback Single‐Input‐Single‐Output (SISO) controllers. These controllers can be applied at least locally, whenever the system relative degree is known. The convergence is global, provided the system relative degree is permanent and few boundedness restrictions hold. No detailed mathematical model of the system is needed. The proposed output‐feedback controller provides for the exact finite‐time‐convergent output tracking of real‐time‐given smooth signals if the output measurements are exact. Otherwise the tracking accuracy is proportional to the magnitude of the sampling noise. The control may be made arbitrarily smooth, thereby removing the chattering effect. The theoretical results are illustrated by computer simulation.     

Output‐feedback tracking in causal nonminimum‐phase nonlinear systems using higher‐order sliding modes

Asymptotic output‐feedback tracking in a class of causal nonminimum phase uncertain nonlinear systems is addressed via sliding mode techniques. Sliding mode control is proposed for robust stabilization of the output tracking error in the presence of a bounded disturbance. The output reference profile and the unknown input/disturbance are supposed to be described by unknown linear exogenous systems of a given order. Local asymptotic stability of the output tracking error dynamics along with the boundedness of the internal states are proven. The unstable internal states are estimated asymptotically via the proposed multistage observer that is based on the method of extended system center. A higher‐order sliding mode observer/differentiator is used for the exact estimation of the input–output states in a finite time. The bounded disturbance is reconstructed asymptotically. A numerical example illustrates the efficiency of the proposed output‐feedback tracking approach developed for causal nonminimum phase nonlinear systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantized output feedback stabilization of uncertain systems with input nonlinearities via sliding mode control

This paper is concerned with the quantized output feedback stabilization problem for a class of uncertain systems with nonsmooth nonlinearities in the actuator device via sliding mode control schemes. It is assumed that system signals are quantized before being transmitted through communication channels. First, a dynamical compensator is developed to estimate unmeasurable system state. Then a sliding surface, in the augmented space using the system output and the estimated state, is proposed, and an adaptive sliding mode control scheme with a static adjustment law of the quantization parameter is established. It is shown that the proposed quantized feedback control strategy is able to tackle parameter uncertainty, external disturbances, and nonsymmetric input nonlinearity simultaneously and guarantees the reachability of the sliding modes of the uncertain system. Finally, an example is given to verify the validity of the theoretical results. Copyright © 2012 John Wiley & Sons, Ltd.     

SLIDING MODE OUTPUT TRACKING WITH APPLICATION TO A MULTIVARIABLE HIGH TEMPERATURE FURNACE PROBLEM

The paper describes a theoretical framework for the design of a robust multivariable output tracking controller using sliding mode concepts. The approach assumes that only measured outputs are available and uses a sliding mode observer to reconstruct estimates of the internal system states for use in a full information sliding mode control law. This scheme is applied to a control problem associated with high temperature furnaces. The paper describes the synthesis of the proposed control scheme from design through to implementation on an industrial test facility. © 1997 by John Wiley & Sons, Ltd.     

基于高增益鲁棒滑模观测器的故障检测和隔离

针对一类同时具有执行器和传感器故障的不确定线性系统,讨论了基于观测器的故障检测和隔离方法.首先,通过引入增维向量,使得在构造的增维系统中,故障向量包含了原系统的执行器故障和传感器故障.通过构造辅助输出使增维系统的观测器匹配条件得以满足,同时设计高增益滑模观测器对辅助输出进行估计.然后,对增维系统构造鲁棒滑模观测器并用作故障检测观测器,通过滑模控制项来抑制干扰,使观测器具有鲁棒性.在此基础上,结合多观测器故障隔离思想,提出了可以同时对执行器故障和传感器故障进行检测和隔离的方法. 最后,通过对一个五阶飞行器模型进行仿真,证明了所提方法的有效性.     

Hybrid‐impulsive second‐order sliding mode control: Lyapunov approach

Dynamic system of relative degree two controlled by discontinuous‐hybrid‐impulsive feedback in the presence of bounded perturbations is considered. The state feedback impulsive‐twisting control exhibits a uniform exact finite time convergence to the second‐order sliding mode with zero convergence time. The output feedback discontinuous control augmented by a simplified hybrid‐impulsive functions provides uniform exact convergence with zero convergence time of the system's states to a real second‐order sliding mode in the presence of bounded perturbations. Only ‘snap’ knowledge of the output derivative, that is, the knowledge of the output derivative in isolated time instants, is required. The output feedback hybrid‐impulsive control with practically implemented impulsive actions asymptotically drives the system's states to the origin. The Lyapunov analysis of the considered hybrid‐impulsive‐discontinuous system proves the system's stability. The efficacy of the proposed control technique is illustrated via computer simulations. Copyright © 2016 John Wiley & Sons, Ltd.     

Global second‐order sliding mode control for nonlinear uncertain systems

Second‐order sliding mode (SOSM) control is used to keep exactly a constraint σ of the second relative degree or to avoid chattering phenomenon. Yet, the traditional SOSM controllers are designed based upon the assumption that the uncertainties or their derivatives are bounded by positive constants. In this paper, a global SOSM controller is designed for a general class of single‐input–single‐output nonlinear systems with uncertainties bounded by positive functions. Moreover, a variable‐gain robust exact differentiator is developed such that the SOSM controllers with finite‐time convergence can also be implemented even when the derivative of the constraint σ is unavailable. Simulation results are given to show the effectiveness of the proposed method.     

Sliding mode control of discrete‐time switched systems subject to mode delays

This work considers the sliding mode control problem of a class of discrete‐time uncertain switched systems subject to detecting‐delay on mode signals, which may result in the asynchronous phenomenon between the controller and the switched system. Since the mode information of the controlled system is not available for the controller in time, a mode‐independent sliding surface will be introduced, by which an asynchronous sliding mode controller is designed, whose control gain and robust parameter will be changing according to the controller mode. In the analysis on the stability of the closed‐loop control system and the reachability of the specified sliding surface, the asynchronous characteristics are detailedly investigated. It is shown that the Lyapunov function may be not always decreasing along the state trajectories during the unmatched interval of controller modes and system modes. Nevertheless, it is proven that the state trajectories can be driven into a sliding region around the specified sliding surface in finite time. Finally, some numerical simulation results are provided.     

Decentralized sliding mode control for flexible link robots

A technique using augmented sliding mode control for robust, real-time control of flexible multiple link robots is presented. For the purpose of controller design, the n-link, n-joint robot is subdivided into n single joint, single link subsystems. A sliding surface for each subsystem is specified so as to be globally, asymptotically stable. Each sliding surface contains rigid-body angular velocity, angular displacement and flexible body generalized velocities. The flexible body generalized accelerations are treated as disturbances during the controller design. This has the advantage of not requiring explicit equations for the flexible body motion. The result is n single input, single output controllers acting at the n joints of the robot, controlling rigid body angular displacement and providing damping for flexible body modes. Furthermore, the n controllers can be operated in parallel so that compute speed is independent of the number of links, affording real-time, robust, control.     

Static output feedback sliding mode control for time‐varying delay systems with time‐delayed nonlinear disturbances

In this paper, a robust stabilization problem for a class of linear time‐varying delay systems with disturbances is studied using sliding mode techniques. Both matched and mismatched disturbances, involving time‐varying delay, are considered. The disturbances are nonlinear and have nonlinear bounds which are employed for the control design. A sliding surface is designed and the stability of the corresponding sliding motion is analysed based on the Razumikhin Theorem. Then a static output feedback sliding mode control with time delay is synthesized to drive the system to the sliding surface in finite time. Conservatism is reduced by using features of sliding mode control and systems structure. Simulation results show the effectiveness of the proposed approach. Copyright © 2009 John Wiley & Sons, Ltd.